Pinch Sticks: Essential Tool for Precise Woodworking Measurements

How do pinch sticks improve accuracy in woodworking projects. What are the advantages of using pinch rods over traditional squares. Why are pinch sticks crucial for ensuring square assemblies in furniture making.

Table of Contents

What Are Pinch Sticks and Why Are They Important in Woodworking?

Pinch sticks, also known as pinch rods, are simple yet invaluable tools in the woodworker’s arsenal. These deceptively straightforward devices play a crucial role in ensuring accuracy and precision in furniture making and other woodworking projects. But what exactly are pinch sticks, and why have they become such an essential part of the craft?

At their core, pinch sticks are a pair of adjustable rods used to measure and compare diagonal distances within a frame or cabinet. By extending the rods to fit snugly between opposite corners of a structure, woodworkers can quickly determine if their assembly is square. This method of measurement is particularly effective for large structures where traditional squares may fall short.

Key Features of Pinch Sticks:

Adjustable length for various project sizes
Pointed or beveled ends for precise corner placement
Lightweight and easy to handle
Often made of wood to prevent marring finished surfaces

The importance of pinch sticks lies in their ability to provide quick, accurate measurements without the need for numerical calculations. This intuitive approach to squaring assemblies saves time and reduces the likelihood of errors, making them an indispensable tool for both novice and experienced woodworkers alike.

How Do Pinch Sticks Improve Accuracy in Woodworking Projects?

Accuracy is paramount in woodworking, and pinch sticks offer several advantages over traditional measuring tools when it comes to ensuring precise, square assemblies. But how exactly do these simple tools contribute to improved accuracy in woodworking projects?

Firstly, pinch sticks allow for direct comparison of diagonal measurements. By placing the sticks across opposite corners of a frame or cabinet, woodworkers can instantly see if the diagonals are equal, indicating a perfect square. This method eliminates the need for complex calculations and reduces the risk of measurement errors.

Secondly, pinch sticks provide a more intuitive sense of any discrepancies in squareness. Small variations in diagonal lengths become immediately apparent, allowing woodworkers to make fine adjustments on the spot. This real-time feedback is especially valuable during glue-ups when time is of the essence.

Benefits of Using Pinch Sticks for Accuracy:

Direct comparison of diagonals without numerical measurements
Instant visual feedback on squareness
Ability to detect and correct small discrepancies quickly
Reduced risk of cumulative errors in complex assemblies

By leveraging these benefits, woodworkers can achieve a higher level of precision in their projects, resulting in stronger, more visually appealing finished products.

What Are the Advantages of Using Pinch Rods Over Traditional Squares?

While traditional squares have long been a staple in woodworking, pinch rods offer several distinct advantages that make them preferable for certain tasks, particularly when working with larger assemblies. Understanding these advantages can help woodworkers choose the right tool for each job and improve their overall efficiency and accuracy.

One of the primary advantages of pinch rods is their ability to measure across larger distances. Unlike squares, which are limited by their fixed size, pinch rods can be adjusted to span the full diagonal of even sizeable frames or cabinets. This flexibility makes them invaluable for ensuring squareness in large-scale projects.

Another key advantage is the speed at which measurements can be taken and compared. With pinch rods, woodworkers can quickly check both diagonals of an assembly without the need to reposition or realign the tool multiple times. This efficiency is particularly beneficial during time-sensitive processes like glue-ups.

Comparative Advantages of Pinch Rods:

Adjustable length for measuring large assemblies
Quicker diagonal comparisons
More intuitive feedback on squareness
Less likely to mar finished surfaces (when made of wood)
Can be used to check internal dimensions accurately

While squares remain essential for checking individual components and smaller assemblies, pinch rods excel in providing a comprehensive assessment of overall squareness in larger structures. By incorporating both tools in their workflow, woodworkers can ensure precision at every stage of their projects.

How to Make Your Own Pinch Sticks: A Step-by-Step Guide

Creating your own set of pinch sticks is a rewarding project that can significantly enhance your woodworking capabilities. While commercial options are available, making your own allows for customization to suit your specific needs. Here’s a step-by-step guide to crafting your own pinch sticks:

Select straight-grained hardwood for the rods (e.g., maple or oak)
Cut two sticks to equal length, typically 18-24 inches
Shape one end of each stick to a 40Â° chisel-like point
Sand the sticks smooth to prevent splinters
Install adjustable collars (such as those from Veritas) on the rods
Fine-tune the sliding action of the collars
Apply a light finish to protect the wood

When constructing your pinch sticks, consider the range of measurements you’ll typically need. The shortest length a pair can measure is about 1 inch longer than an individual stick, while the maximum is approximately twice the stick length minus 3 inches. Keeping these dimensions in mind will help you create a versatile set of pinch sticks tailored to your projects.

Tips for Optimal Pinch Stick Design:

Orient bevels to face outward for measuring narrow rectangles
Use lightweight wood for easy handling
Consider making multiple sets for different size ranges
Create a storage rack to protect the pointed ends when not in use

By crafting your own pinch sticks, you not only gain a valuable tool but also deepen your understanding of its function and importance in woodworking.

Mastering the Use of Pinch Sticks in Furniture Assembly

Effectively using pinch sticks can significantly improve the quality and precision of your furniture assemblies. But how can woodworkers master this technique to achieve optimal results? The key lies in understanding the proper application and interpretation of measurements taken with pinch sticks.

To begin, always measure from the inside of the frame or carcass, as these are the surfaces that typically interact with other components of the assembly. Place the pointed ends of the pinch sticks into opposite corners, ensuring they’re snug but not forcing the frame out of shape. Then, without adjusting the sticks, move them to the opposite diagonal and compare the fit.

Steps for Using Pinch Sticks Effectively:

Set the sticks to the first diagonal, ensuring a snug fit
Transfer to the opposite diagonal without adjusting
Compare the fit – if identical, the assembly is square
If not square, identify which diagonal is longer
Make necessary adjustments to shorten the longer diagonal

Remember the golden rule when correcting for squareness: always work to shorten the longer diagonal. This might involve tweaking joint shoulders, adjusting clamp positions, or making minor cuts to components. During glue-ups, angle your clamps slightly along the longer diagonal to gently compress it.

With practice, you’ll develop an intuitive sense for interpreting pinch stick measurements and making precise adjustments. This skill will become invaluable in creating furniture that’s not only square but also structurally sound and visually appealing.

Advanced Techniques: Using Pinch Sticks for Complex Woodworking Projects

While pinch sticks are invaluable for basic squaring tasks, their utility extends far beyond simple frame assemblies. Advanced woodworkers can leverage these tools for a variety of complex projects and specialized measurements. By expanding your understanding of pinch stick applications, you can tackle more intricate woodworking challenges with confidence.

One advanced technique involves using pinch sticks to check for twist in large panels or tabletops. By measuring diagonals at different points along the surface, you can detect and correct subtle warping that might otherwise go unnoticed. This method is particularly useful when working with solid wood slabs or glued-up panels.

Advanced Applications of Pinch Sticks:

Checking parallelism in tapered legs
Verifying symmetry in curved components
Ensuring consistent reveals in complex casework
Measuring internal spaces for precise fitting of drawers or shelves

For very large assemblies where standard pinch sticks might fall short, consider using a tape measure with a special tip designed for diagonal measurements. Alternatively, you can create ad hoc pinch rods from longer materials for one-time use on oversized projects.

As you become more proficient with pinch sticks, you’ll discover creative ways to apply their principles to solve unique measurement challenges in your woodworking endeavors. This adaptability makes pinch sticks an enduring favorite among skilled craftspeople.

Maintaining and Caring for Your Pinch Sticks to Ensure Longevity

Proper maintenance of your pinch sticks is crucial for ensuring their accuracy and longevity. These precision tools, whether store-bought or handmade, require regular care to remain reliable over years of use. But what steps should woodworkers take to keep their pinch sticks in top condition?

First and foremost, protect the pointed ends of your pinch sticks when not in use. Many woodworkers create a simple storage rack or sleeve that shields these delicate tips from damage. Additionally, periodically check and tighten any hardware, such as adjustable collars, to maintain smooth operation.

Essential Pinch Stick Maintenance Tips:

Clean pinch sticks after use to remove dust and debris
Apply a light coat of wax or oil to wooden components to prevent moisture absorption
Store in a dry environment to prevent warping
Regularly inspect for signs of wear or damage
Recalibrate or replace if accuracy becomes compromised

For wooden pinch sticks, be mindful of environmental changes that could affect their dimensions. Extreme fluctuations in temperature or humidity can cause wood to expand or contract, potentially impacting accuracy. If possible, store your pinch sticks in a climate-controlled area.

By implementing these maintenance practices, you can ensure that your pinch sticks remain a reliable and precise measuring tool for years to come, contributing to the consistent quality of your woodworking projects.

Integrating Pinch Sticks into Your Woodworking Workflow for Optimal Efficiency

Incorporating pinch sticks into your regular woodworking routine can significantly enhance your efficiency and the overall quality of your work. But how can you seamlessly integrate these tools into your existing workflow? The key lies in understanding when and where pinch sticks offer the most benefit, and making them readily accessible throughout your projects.

Start by keeping your pinch sticks within easy reach at your workbench. Consider creating a dedicated space or holder that allows for quick access during critical assembly stages. This immediate availability encourages more frequent checks, leading to improved accuracy throughout the building process.

Strategies for Integrating Pinch Sticks:

Incorporate diagonal checks at key stages of assembly
Use pinch sticks to verify squareness before and after glue-ups
Leverage pinch sticks for final checks before applying finishes
Teach apprentices or assistants to use pinch sticks for consistent quality control
Document pinch stick measurements for complex or repeatable projects

Remember that pinch sticks complement rather than replace other measuring tools. Develop a habit of using them in conjunction with squares, tape measures, and other devices to achieve comprehensive accuracy in your work. By thoughtfully integrating pinch sticks into each phase of your woodworking process, you’ll find that your projects come together more smoothly and with greater precision.

As you become more accustomed to using pinch sticks, you’ll likely discover new and innovative ways to apply them in your unique woodworking style. This adaptability makes pinch sticks not just a tool, but a valuable extension of your craftsmanship.

Heartwood » Blog Archive » Pinch rods

• Friday, December 21st, 2018

Accurate construction of most furniture assemblies – frames, carcasses, post-and-rail construction, and drawers – usually involves 90° angles. “Square” is a big part of woodworking. Parallelograms, we do not want.

Will a square do the job? Yes, for verifying individual parts, but for most assemblies, the tool to use is pinch rods. Here are the reasons:

They are more accurate.
You can work faster, and don’t need to remember numbers.
You will get a more intuitive sense of the magnitude and direction of the error.
Most important, you will see immediately how to correct it, especially during glue up.

The idea is simple. You are comparing the length of the diagonals across the frame. If they are equal, you have a rectangle; if not, you have something else, such as a parallelogram. (Yes, the diagonals would still be equal in a symmetrical trapezoid, but you will not make that if you start with the opposite sides of the frame being equal, unless of course you want it ever so slightly that way in making a carcase to hold drawers.)

I have been using this set of pinch rods for more than 20 years, which I made with collars manufactured by Veritas. I recommend these because they simplify construction, and the result is a lightweight, low profile tool that is quick and secure to clamp, and adjusts smoothly.

Veritas supplies basic construction instructions but here are a few tips. You’ll want to build a set of rods, so keep in mind that the shortest length a pair of rods can measure is at least 1″ longer than the individual stick length, while the longest measurement will be about twice the stick length minus 3″.

A 40° chisel-like business end works well, but contrary to Veritas’ instructions, I suggest orient the pair of sticks so the bevels face away from each other, toward the outside, as seen in the photo below. In use, the beveled side should always face the shorter side of the rectangular assembly. Thus, you will rotate the stick 180° along its length to measure the other diagonal. This allows the tool to manage even the narrowest rectangles.

The storage position is shown in the photo below. The non-working blunt end protects the sharp-beveled working end. I prefer to apply the gentle accuracy of these wooden rods instead of metal ones on cleaned up work.

Nearly always, you will be measuring from the inside of the frame or carcass because the other parts of the assembly will interact with the inside surfaces and angles, not the outsides.

For very large assemblies, a tape measure, perhaps with the special tip made by Veritas, or an ad hoc pair of rods, is more practical than having a giant special pair of rods.

To make a parallelogram into a rectangle, there is a simple rule to remember: shorten the long diagonal. For dry assembly, this may mean tweaking the joints, such as trimming tenon shoulders in a frame or post-and-rail construction, or simply adjusting the positions of the clamps. During the crunch time of glue up, remember: angle the clamps to be slightly more along the long diagonal, as if you are trying to scrunch it shorter. I am always amazed at how little clamp adjustment is necessary to square up the assembly, especially using heavy clamp pressure. Don’t overdo it.

Sure, you did a meticulous layout and cut great joints – dovetailed that drawer, mortise-and-tenoned that frame – but somehow when it all goes together the evil forces still manage to sneak in. Assess and correct it with pinch rods.

You might even want to make a nifty rack to store them.

Handsome & Co. | The Handsome & Co Educational Taster: Pinch Rods

The Handsome & Co Educational Taster: Pinch Rods

First term of 2017 and the Handsome and Co educational taster was for the students to make a pair of pinch sticks.

What are pinch sticks? Well, pinch sticks, also know as pinch rods are a very simple woodworking tool that allows for very accurate measurements of the squareness of cabinets as well as for checking other woodworking dimensions such as whether the distance between two legs of a table are the same at the bottom and at the top.

By sliding the two sticks apart, each pointed end is placed across diagonal corners of a cabinet and compared to the opposite corner. If they match you have a square carcass, if they don’t some correction of joinery or with clamps when gluing up is required.

One final benefit of the pinch sticks is that when a cabinet is clamped, often the sides can be distorted by the pressure of the clamps. Testing the internal walls or external sides with an ordinary set square or engineers square will give a false reading, as once the clamps are removed the sides will return to normal.

Like some of the previous educational tasters, this one was a mix of both metalworking, woodworking and a little spray finishing thrown in for good measure.

The taster also introduced many students to using a false bed on the thicknesser. Typically this is a piece of 18mm MDF which is used on the bed of the thicknesser to machine pieces that would be too thin to do normally. The students learnt how to adjust their measurements to take into consideration the thickness of their material as well as the thickness of the false bed.

While some students machined their wood for the project, others got stuck into cutting the steel tube which would be used to house the pinch sticks. Even though the steel tube had only 2mm walls, many students soon realised how much easier wood is to cut by hand compared to steel. We discussed the similarities between holding and using a hacksaw to accurately cut steel and using a tenon saw to accurately cut wood.

Once each student had cut two pieces of tube, we marked the centres and drilled a couple of holes. Students learnt that its much easier to start with smaller hole and progressively drill it out bigger than just drilling the final dimension. Two of the holes needed tapping for an M6 bolt. Some of the students had some experience with tapping wood from an earlier educational taster and were familiar with the process, although now on a smaller scale.

With all the holes drilled, tapped, de-burred and edges smoothed off it was time to spray them. Students learnt two simple lessons when it comes to spray finishing; maintaining a consistent, fixed distance from the piece being painted as well as a ‘less is more’ motto. It’s easier to build up thin coats to achieve a good result than try and do it all in one go.

Finally, it was time to chisel out the clamp pads. I think this was the most challenging aspect of the taster and forced many students to really focus on their work and, importantly, sharpen their chisels.

All up most students finished the sticks and now have a useful tool for future use as well as understanding a little more about how to correctly check for square.

Written by Liam Thomas – Tutor.

Website: We Eat The Sun

How to Cut a Watermelon

Not sure where to start with these red giants? We’re showing you our favorite ways to cut a watermelon – cubes, stars, sticks, and more!

This post contains referral links for products we love. Pinch of Yum earns a small commission on these links at no cost to you, and the links will always be marked with an asterisk. We ♡ honesty!

Okay, who among us hasn’t lugged one of these delicious juicy, red giants into our kitchens and then thought “Wow, where do I start?” It’s kinda nice to have a plan before you start wielding a knife around that rolly, wobbly, seriously-so-giant summer treat, you know? And there is so much possibility beyond your standard cube situation!

We’re not saying you have to, like, carve a shark into it or anything (although please trust us, SOMEONE HAS DONE THIS), but you could go for snack-sticks, fun shapes, or our favorite: turning that big ol’ melon into your own little juice keg to the absolute marvel of all your party guests. So scroll on, friends, for all things watermelon!

Prefer To Watch All The Ways Instead Of Read?

How To Cut a Watermelon Like a Pro

There are five main ways we love to cut a watermelon.

Cubes (your standard cubed situation – great for easy snacking, fruit bowls, smoothies, and salads)
Triangles (your cutie watermelon wedge – this one has a built-in rind handle for easy eating and has been voted “Most Likely to Be Spotted at a BBQ”)
Sticks (your grab-and-go melon friend – an unconventional method but, honestly, just a really fun way to eat watermelon)
Fancy (your extra-special fruit cut – just a quick way to make watermelon look like the superstar it truly is)
Party Trick (your melon-turned-drink-vessel – pop a spigot on the front and instant watermelon juice)

The Basic Cube Cut

Step 1: Cut the ends off of the watermelon to make flat sides. This will help keep things stable when cutting, so your watermelon doesn’t roll right off the counter.

Step 2: Follow the shape of the melon with your knife to cut off the outside rind, including the white inner layer.

Step 3: Make 1-inch slices vertically, then 1-inch slices horizontally to form watermelon cubes.

The Triangle Cut

Step 1: Cut ends off of the watermelon.

Step 2: Cut in half lengthwise, then cut each half lengthwise once more.

Step 3: Make cuts 1-inch apart to create watermelon wedges. Repeat with the other halves of the watermelon.

The Stick Cut

Step 1: Cut ends off of the watermelon, then cut watermelon in half.

Step 2: Put watermelon cut side down. Make cuts 1-2 inches wide.

Step 3: Rotate the watermelon and make another set of cuts to form sticks. Repeat with the other half of the watermelon.

Step 4: Pull watermelon sticks out and enjoy!

The Fancy Cut

Step 1: Cut watermelon in half.

Step 2: Continuing width-wise, make cuts 1-inch apart to create watermelon circles.

Step 3: Use a cookie cutter to cut out different shapes of melon. Stars are our favorite and just so fun!

The Party Trick

Step 1: Cut a tiny sliver off the end of the watermelon so it has a flat bottom to stand up straight.

Step 2: Cut the remainder of the watermelon 1/4 of the way from the top.

Step 3: Scoop out most of the melon from the inside and blitz everything up in a blender until it becomes like a melon puree. This will probably take a few rounds with all the melon scooped out. Put the fruit puree in the fridge for a bit to chill it.

Step 4: Using a knife, cut a little slit in the front where your spigot will go. Push the spigot into the melon and plop your melon in a bowl for stability and serving. Here’s the spigot we used*!

Step 5: Pour the fruit puree back into the whole watermelon and serve cold.

Is It Better To Cut a Watermelon Warm Or Cold?

It’s best to cut watermelon cold since it retains the juices are less likely to spill out from the fruit and it can hold its shape a bit better. Plus, it tastes a bit more refreshing when it’s cold, cold, cold!

How Long After You Buy a Watermelon Should You Cut It?

If you’re storing your watermelon on the counter at room temperature, we’d recommend cutting it up within a week or so. If you’re storing it in the fridge (whoa, this fruit baby takes up space), you have a bit more time and can cut it within 2-3 weeks.

How Long Is Cut Watermelon Good For?

After watermelon is cut, store it in the fridge in a sealed container. It tastes the best if it’s eaten within 3-5 days.

How To Pick Out a Good, Juicy Watermelon

Find a hefty melon. It should feel heavy for its size. That’s a good indicator that it has a lot of water and you’ve found a juicy one.
Give it a lil’ thwap. It should sound hollow inside and you should hear a deep thunk.
Your watermelon shouldn’t be totally green. You’ll want one that has a yellow-ish spot on one side.

How Do I Know When a Watermelon Is Ripe?

The sound will be a good indicator. If it sounds hollow, that means it’s juicy and ready for eating. If it sounds dull after tapping it, it needs a bit more time to ripen.
That spot on the bottom of the watermelon can also be a good indicator. If the spot is white, give it a little bit more time before cutting it open and wait until you see the yellow spot.

Can You Eat Watermelon Seeds?

The seeds are totally fine to eat. If you prefer though, you can always buy a seedless watermelon.

Favorite Watermelon Recipes We Love

We need to know! Do you have a favorite cut? Maybe a way to chop up that big melon that we didn’t cover? Let’s hear it!

Did You Know These Stick Bug Facts?

Stick Bug Interesting Facts

What type of animal is a stick bug?

As the name implies, the Stick Bug is an insect that can camouflage itself according to the natural environment like leaf, bark, lichen, twigs, and moss. They are usually brown, but some may be green, black, or gray and change color.

What class of animal does a stick bug belong to?

The Stick insects belong to the class Insecta, family Phasmatidae and the Stick Bug order is Phasmatodea. Walking sticks belong to the same order as Leaf Stick insect species. The African Stick Bug is known as Bactrododema Hecticum.

How many stick bugs are there in the world?

There are 3,000 species of Stick insects or Walking sticks around the world. According to its habitat, each Stick insect species can camouflage and has different physiological characteristics.

Where does a stick bug live?

The Stick insects live in the tropical forest, jungles, and woodland. They are found worldwide in Africa, Asia, Europe, Central America, North America, South America, Eurasia, and Oceania. Around 300 Stick insect species are found to live on Borneo’s island.

What is a stick bug’s habitat?

The Stick Bug habitat comprises tropical forests and woodlands. It lives on the leaves of the trees. Often you will find them sitting on the top of the leaves or bark of trees or with mosses and lichens to blend well with the surrounding to protect themselves from being prey.

Most Stick insect species are found in South America, Southeast Asia, and Borneo island (with 300 Stick insect species). The Stick insects are nocturnal and usually come at night to find their prey. The whole day, the Stick insects lie motionless on a plant.

Who do stick bugs live with?

The Stick insects can live on their own or in groups. They are not social creatures to live alone and do not suffer from any loneliness.

How long does a stick bug live?

The Stick insects have an average lifespan of 12 months, but they might live longer if kept in captivity. The Sticks insects go through incomplete metamorphosis. The nymphs or the babies look like the miniature version of the adult Stick insects. In case they have wings, it appears only in the final stage of molting.

How do they reproduce?

The mating behavior of Phasmids is one of the most unique. The pairing takes place for extremely long hours. The pairing usually goes on for 79 days. In some other Phasmatodea species, the coupling posture can go on for one or two weeks and some for 136 hours.

The mating of the Stick insects is non-stop. During this non-stop coupling session of several days, the Stick insects stick to each other, not letting go of each other. The walking leaf insects do not have visual signals. They rely on the chemicals released in the air to attract their mates.

If the males are absent, the female Stick insects can reproduce without males’ presence. The females can reproduce their young ones from the unfertilized egg. This process is known as parthenogenesis, an asexual form of reproduction. The young ones look exactly like their mother. This parthenogenesis process is a very uncommon phenomenon, and scientists are still studying it.

A single female can lay up to hundred eggs. The Stick Bug eggs resemble seeds. As the eggs might be vulnerable to predators, the female Stick insects have various strategies to lay eggs in a safe place to protect them. The females drop each egg on the ground far from one another, or lay eggs in a hiding place or sometimes attach the eggs to the plants’ leaf.

The Stick insects rely on hemimetabolism (incomplete metamorphosis). The three stages of the Stick Bug life cycle are egg, nymph, and adult stage. Once the baby Stick insects emerge from the eggs, it is known as the nymph stage.

What is their conservation status?

The conservation status of the Stick insect is Near Threatened.

Stick Bug Fun Facts

What do stick bugs look like?

The Stick insect is a bug that looks like sticks. It is cylindrical, flattened, and leaf-like. It has a slender antenna and compound eyes, long and slender segmented legs, and short or reduced wings. The mouth part comprises the mandibles on both sides. The walking leaf has six legs. There are some species of Stick Bug with wings.

The brown Stick Bug or the wood stick bug body resembles a stick, branch, or twig. They look so much like twigs that you can’t recognize them until they walk away. It is a thin and slow-moving bug. A few species like the Carausius morosus change their pigments to blend with the surrounding environment. The Stick Bug camouflage gets rid of the predators.

The Stick insects are nocturnal, which means they have excellent vision. They usually go out at night to feed. The eyes comprise facets. As they grow, the number of facets in the eyes increases, and also the photoreceptor cells are improved. As they develop into adults, their retinal layer adapts to light changes. This retinal layer protects the eyes from radiation.

How cute are they?

The Stick insect does not look cute. Its appearance is like that of twigs or dried branches. It is one of the exotic pets you can get home.

How do they communicate?

The Stick insects are known to communicate through chemical communication. In this type of communication, the chemicals are released in the air, which their species detect. It is the only means of communication in most insect species.

How big is a stick bug?

The average length of a Stick insect is 0.6-25 in (1.5-63 cm) in length. The Giant Stick Bug is 21 in (53.3 cm) in length. The common Stick insect is two times smaller than the Giant Stick insect.

How fast can a stick bug move?

The Phasmids are slow-moving insects. They take only three steps at a time. They walk slower than the cockroaches.

How much does a stick bug weigh?

The weight of the Stick insect is 2.3 oz (65 g).

What are their male and female names of the species?

The male species is known as the male Stick insect, and the female species is known as the female Stick insect.

What would you call a baby stick bug?

Baby Stick insects are called nymphs.

What do they eat?

The Stick insects are herbivores. The walking stick bug diet mainly comprises plants and vegetation. The food that Phasmids eats includes leaves, vines, and berries. Since they are nocturnal, they feed at night. The young ones, i.e. the Nymphs, feed on plants, shrubs, and berries.

Are they dangerous?

No, the Stick insects are not dangerous to humans. They are stick-like herbivorous insects who love to hang around vegetation and feed when required. They usually laze around in the daytime and only at night go to find food.

Would they make a good pet?

Yes, the Stick insects are kept as pets. They would make a good pet as they are unique and easy to keep. But you should provide them with spaces with good ventilation and surfaces where they can climb around. As pets, they don’t require daily maintenance and can be left alone for days. You can get a stick bug pet through reptile supply vendors.

Did you know…

Have you seen a Stick Bug dancing? The Stick insects dance to lure away their predators.

The females are larger than the males.

The world’s longest insects are Phryganistria Chinensis which is 25.2 in (64 cm) in length.

Some Stick insects have a mutual relationship with the ants. The ants take the unhatched eggs to their nest, kept safe from predators. After the eggs are hatched, the young Stick insects leave the ants’ colony. However, many predators eat the eggs despite the protective measures taken.

Stick Bug vs. Praying Mantis: Like the Mantis, the Stick insect makes rhythmic and side-to-side movements. According to the host plant, the Stick insects will become a stick or leaf. It also can imitate the motion of the twig. It also avoids its predators by remaining motionless and pretending to be dead.

There are some Stick bugs with wings. They open their bright-colored wings during a free fall, and once it lands, it can camouflage with the ground. Sometimes they display their bright-colored colored wings for up to 20 minutes.

How do stick bugs protect themselves?

The Stick insects camouflage to look like sticks, so the predators cannot identify them. Other ways of protecting themselves from the predators include: changing their color, playing dead, releasing an odor into the air, and swiping with their legs. They can remain motionless for hours.

The Phasmida are known to fight back at a predator with their long legs. Its nocturnal feeding habits also help them to hide from predators. Many Stick insects also like to get rid of their predators by exposing their bright color, usually hidden, and making a loud sound.

What do stick bugs do with their skin after they molt?

Every time a Stick insect sheds its skin, it means it’s growing. Because of its stiff and rigid outer skin, it cannot grow between the cast-off skin. After it sheds off its skin, the Phasmids generally eat their leftover skin. For example, the Extatosoma tiaratum eats its skin after it molts.

Here at Kidadl, we have carefully created lots of interesting family-friendly animal facts for everyone to discover! Learn more about some other arthropods including leaf-footed bug, or western conifer seed bug.

You can even occupy yourself at home by drawing one on our Stick Bug coloring pages.

Control Methods: Thumbs vs. Pinch

The eternal debate goes on, as to whether it is better to exclusively use your thumbs to control the radio sticks, or to use both your thumbs and pointer fingers for control over your radio. There are pros and cons to both ways, and in this article, I will be presenting both sides of the argument so that you can make the best possible decision for yourself.

This article was submitted through the GetFPV Community Program by Lawrence Ro.

Disclaimer: This article was written solely by a member of the FPV Community. Views and advice in this article are that of the author and does not reflect the opinion or views of GetFPV.

Thumbs

The first way most people hold it is the good old-fashioned game controller way, known as “thumbing”. This is usually the way many toy quadcopter transmitters are meant to be held, as well as RC airplane transmitters. Most of the time, when people transition from the toy quad to an FPV rig, the familiar feel translates into “thumbing” for more advanced radio systems such as the Taranis or Spektrum. This is totally fine, as it is usually more intuitive holding the transmitter this way.

Using exclusively thumbs to control the aircraft can have some benefits. It is much easier to flick your auxiliary switches, and the radio may feel a bit more comfortable in your hands. It has the traditional Xbox/Gamecube controller feel that everyone loves, making it easy for people to feel at home while flying FPV.

However, there are some shortcomings regarding this method. The first shortcoming is that there is less control of the sticks. Your thumbs simply don’t have the same dexterity or flexibility as your other fingers. Also, depending on your transmitter, it may be difficult to reach the corners of the sticks, thus restricting the full movement of the aircraft due to lack of control.

Pinch

The other main way people hold their transmitters is via pinch. This is when the pointer finger and thumbs pinch the sides of the sticks, and the middle and ring fingers are used to activate the switches. Using this method, a higher degree of accuracy is added to your fingers, as there are now two fingers controlling the sticks, as opposed to one stubby thumb.

Pinching may not be the most intuitive way of controlling your quad, and it might not even be the most comfortable in the beginning. However, the added accuracy and precision given makes up for any deficiencies. I have heard that many heli pilots use the pinch grip because of its precision, which makes it possible for mind-bending maneuvers to be pulled off easier. Also, quite a few FPV pilots use the pinch grip for racing and precision acro.

Hybrid Pinch

Yes, there is one more way many pilots control their sticks. This is the hybrid pinch. It’s a combination of thumbing and pinching, which kind of brings the best of both worlds into play. You get the familiar comfort of thumbing, while having the added accuracy of a second finger.

This is achieved by placing your thumbs on the sticks, just like in the thumb grip, and then gently resting your pointer fingers on the top part of the sticks. Another variation of this includes placing the middle part of your pointer finger on the top of the sticks, thus covering the whole top part of the gimbals.

I personally use the hybrid pinch grip, because it is very comfortable and allows me to grip the transmitter very comfortably, while still being able to use my pointer finger for added precision.

Conclusion

Now, the final question: which grip should YOU use? Well, theoretically, the pinch grip is superior to the thumbing and hybrid pinching. However, everyone is different, and finding the right grip which works for YOU is the single most important thing here. Try out different configurations. Fly a few packs with each grip and see how it feels. You may surprise yourself with how easily one method may come to you.

Here’s a cool trick to try if you are still searching for the perfect grip. Hold one of your control sticks in a thumb grip. Then move one of the sticks one notch upward. Go back and forth, between the neutral notch and the first notch, going as fast and accurately as possible. Make a note on how it feels, and then do the same things using the pinch grip, and then with the hybrid pinch grip. Whichever one feels the most comfortable and accurate to you is the grip which you should use.

In conclusion, the answer to the debate regarding pinching vs thumbs is a debate without an answer. It really depends on the person, and which one is best for them, as there is solid justification for each side. Enjoy finding out which grip is the best for you and happy FPV!

Author: GetFPV

http://getfpv.com

The GetFPV Learn site is the ideal location to expand your knowledge of an FPV Racing Drone. Visit the GetFPV shop for a massive selection of the finest FPV Racing Drone products.

Baked Chicken Drumsticks (tender, juicy, easy!)

Baked chicken drumsticks (aka, baked chicken legs) are a simple and crazy delicious main dish that you will want to eat on repeat.

My family goes crazy for these baked chicken legs! Side note: What do you call them? Chicken legs? Or drumsticks??Forgive me if I use these interchangeably throughout this post! Because I call them both.?

They make the house smell amazing while they are cooking, and they are easy enough to make on a weeknight. Pair them with a couple simple sides, and you have dinner.

We are huge ButcherBox fans over here, and they offer up specials every now and then, and we purchased (for a one time fee) 3 pounds of chicken legs in every one of our monthly boxes. For. Life. ??? Such a great deal!

Try out ButcherBox now and get 2 pounds of ground beef for life if you purchase through this link. (??affiliate link, but I purchase my own box every month.)

So we end up eating these baked chicken drumsticks a couple times a month, and none of us are mad about it.?

How to prep and season chicken legs

First, make sure the drumsticks are fully thawed (if you keep meat in the freezer). Then, remove the drumsticks from the package, and blot them with paper towels. This will help the skin to crisp up when you cook them.

Next, transfer the drumsticks to a baking sheet, lined with parchment paper. Drizzle them with a little oil.

It doesn’t take much! Just a little dab will do ya. ?Then use your hand to rub it in and coat both sides.

Next, sprinkle the seasoning mix on both sides. I am using a mixture of salt, pepper, garlic, onion powder and paprika. Exact amounts are in the recipe card below.

How to bake chicken drumsticks

Now that you have the chicken legs all seasoned up, it’s time to bake them! Put them in an oven that has been preheated to 425 F degrees, and cook for twenty minutes.

Remove the baked chicken drumsticks, and using tongs, carefully flip each drumstick over. Return them to the oven to cook for another fifteen minutes. They come out looking like this.?

Let the baked chicken drumsticks rest for about 5 minutes before serving. We like ours with air fryer roasted potatoes and a side salad.

What to serve with baked chicken drumsticks

Here are some other side items (including recipe links!) that go great with baked chicken legs.

Baked chicken drumsticks recipe

Did you try my baked chicken drumsticks recipe? Give it a star rating. Pin it and share it if it looks good to you. And be sure and stay connected on social media!

Instagram | Pinterest | Facebook | YouTube | Twitter

Baked Chicken Drumsticks

Baked chicken drumsticks (baked chicken legs) are a simple and crazy delicious main dish that you will want to eat on repeat. Tender, juicy, easy!

Author Marjorie @APinchOfHealthy

Ingredients

6 chicken legs raw, with skin
2 teaspoons avocado oil
1 teaspoon salt (I used Himalayan pink salt)
1/4 teaspoon black pepper
1 teaspoon granulated garlic (or garlic powder)
1/4 teaspoon paprika
1/2 teaspoon onion powder

Instructions

Preheat oven to 425 F degrees
Mix the salt, pepper, granulated garlic, paprika and onion powder in a small dish, and set aside.
Blot the drumsticks with paper towels, and place on a baking sheet lined with parchment paper.
Drizzle the oil over the drumsticks, and massage to coat both sides.
Sprinkle the seasoning mixture on the chicken legs; flip them over and season the other side.
Bake in the preheated oven for 20 minutes, and remove the baking sheet to a heat safe surface.
Use tongs to carefully flip each drumstick over, and return to the oven for another 15 minutes.
Remove from the oven, and allow the chicken legs to rest for about 5 minutes before serving.

Recipe Notes

Nutritional information is approximate and was calculated using a recipe nutrition label generator.

Nutrition Facts

Baked Chicken Drumsticks

Amount Per Serving

Calories 292 Calories from Fat 198

% Daily Value*

Fat 22g34%

Saturated Fat 6g38%

Cholesterol 120mg40%

Sodium 496mg22%

Potassium 267mg8%

Carbohydrates 1g0%

Fiber 1g4%

Sugar 1g1%

Protein 21g42%

Vitamin A 160IU3%

Vitamin C 1mg1%

Calcium 12mg1%

Iron 1mg6%

* Percent Daily Values are based on a 2000 calorie diet.

(Visited 24,474 times, 3 visits today)

Epidurals (for Parents) – Nemours KidsHealth

What Are Epidurals?

Epidurals are a way to make labor and delivery less painful and more calm and controlled.

Epidurals are a form of regional anesthesia. They provide continuous pain relief to the entire body below the belly button (including the vaginal walls) during labor and delivery. With an epidural, a woman is comfortable and still fully awake.

An epidural (sometimes called an epidural block) is what most women think of when they consider pain medicine during labor.

How Are Epidurals Done?

An epidural involves medicine given by an

anesthesiologist. A thin, tube-like catheter is inserted through the lower back into the area just outside the membrane covering the spinal cord (called the epidural space). You’ll sit or lie on your side with your back rounded while the doctor inserts the epidural catheter.

It only takes a couple of minutes to insert an epidural. The skin is numbed first, so you’ll feel just a stick or pinch and some pressure. A needle is only used to thread the thin catheter into place. Then, it’s removed. You may be aware of the catheter in your back, but this isn’t painful or uncomfortable.

You should start to feel the effects of the medicine in 10–20 minutes. You may still feel the pressure of contractions, but you shouldn’t feel the pain. Being aware of your contractions will help once you start to push.

As the doctor adjusts the dosage, your legs may feel a little weak, warm, tingly, numb, or heavy. Unlike with some other labor and delivery medicines, you’ll be fully alert and aware of what’s going on.

The epidural catheter will stay in place throughout your labor and delivery.

p

What Are the Risks of Epidurals?

Epidurals do have some drawbacks. They might:

make it harder for a woman to push the baby out (the anesthesiologist can adjust the medicine if this happens)
make the mother’s blood pressure drop
cause a headache, itchiness, nausea, or vomiting
cause temporary difficulty with peeing, requiring a urinary catheter

Some studies suggest that epidurals may increase the chances of C-sections or vaginal deliveries that require forceps or vacuum extractions, but others show no connection.

Will an Epidural Affect My Baby?

Some epidural medicine does reach the baby. But it’s much less than what a baby would get if the mother had pain medicines through an IV or general anesthesia.

The risks of an epidural to the baby are minimal, but include possible distress. Usually, this means the mother’s lowered blood pressure causes a slower heartbeat in the baby.

How Will I Feel After Delivery?

You may shiver a little after your baby is born (which is common with or without an epidural). Your legs might be numb and tingly as the medicine wears off, which may take a little while. So you might not be able to walk around for at least a few hours after the birth. Even after that, ask someone to help you until your legs feel back to normal. If you had a C-section, the doctor may continue the epidural for a while after the delivery to control any pain.

Your back might be sore for a few days where the epidural was inserted. Very rarely, women who get epidurals may have very bad headaches after the birth.

How to hold Chinese sticks correctly

For the first time, my husband and I went to an oriental restaurant and there they served these very Chinese sticks with salads. In films, they are very cleverly wielded by Americans, Asians and other people, but in practice … We asked, as expected, the waitress … the girl is helpful … but she doesn’t know how to deal with these chopsticks … they began to look for help from the visitors … Two were sitting at the next table women and deftly wielded these beasts (chopsticks … Chinese …).To our question how to handle them, was given the first way how to hold Chinese sticks : “Put one stick on your middle finger and hold it with your thumb, and put the second stick like a pen when you write – and you will succeed!”.

We tried it – it worked out for me, it didn’t suit my husband very well. As it turned out, the movable stick is too mobile and more often does not fall on the stationary stick than it does.
We went online and found the second animated way to hold Chinese sticks : hold the first stick between the little finger and ring fingers, holding it with your thumb, and place the second on the middle and index fingers.

After all the torment with these chopsticks, on the next trip we rushed to try a Japanese sushi dish and directed our feet straight to a Japanese restaurant in the capital. And only there they finally explained to us the secret of of the correct holding of Chinese sticks .

Place one stick on your ring finger and reinforce it with your thumb – this part of the structure will be practically motionless.

Hold the second stick with your middle, forefinger and thumb, but not in the same way as you hold the fountain pen – this part will be mobile.

Now try to click them – this will reveal the optimal position of the sticks in your hand.

Now you can take sushi or rice with them (and now we only eat noodles and spaghetti at home with chopsticks – it’s very convenient!).

These are just the methods that have been encountered in practice, I wonder how the sticks are actually held in China and Japan?

VN: F [1.9.22_1171]

Rating: 4.4 / 5 (276 votes cast)

VN: F [1.9.22_1171]

Rating: +59 (from 85 votes)

How to hold Chinese sticks correctly, 4.4 out of 5 based on 276 ratings

The entry has been posted
Thursday, December 28th, 2006 at 00:53 Filed under Chinese Cuisine, Culinary Stories, Culinary Tips, Culinary Tricks, National Cuisine, Japanese Cuisine.
You can follow the development of the topic via RSS 2.0.

Commenting and pingbacks are prohibited.

90,000 Sandra Bullock put everything on the line – Newspaper Kommersant № 68 (3152) dated 04.16.2005

premiere cinema

Educational comedy Miss Congeniality 2: Armed and Fabulous continues a five-year-old story about a special agent who was thrown into the world of glamor by the FBI. The heroine of Sandra Bullock continues to get rid of antisocial and repulsive habits, and the apotheosis of her moral transformation is her friendship with her own black bodyguard.LYDIA MASLOVA found it inappropriate to laugh in this situation.

“Miss Congeniality-2” is a spectacle that is not needed by anyone except the producer in the person of Sandra Bullock herself, and unsatisfactory even as an idiotic tickler, designed to cause a homeric, albeit dull laugh. Perhaps the fact is that this film, too feminine, is devoid of masculine cynicism and rudeness, but is filled with sublime considerations about whether it is worth caring first of all about oneself or about others too. Effective comedy usually requires offending, pricking, pinching, and Miss Congeniality II is too kind and peaceful for that.

In the first film, one could still feel the excitement with which the authors portrayed the heroine as a creepy, sloven and unfeminine bully, in order to shock her with a wonderful, albeit painful, transformation into a beauty queen. In the first film, Michael Caine’s character transformed the uncouth FBI pig into a glamorous chick, and a lot was kept in their interaction with Sandra Bullock. In “Miss Congeniality-2”, instead of Kane, an unoriginal gay stylist was invented with two assistants who, according to the plot, have nothing to do.After being advised to buy more expensive glasses, Agent Gracie Hart turns into a “bitch with a purse” instantly, like Cinderella with a wave of a magic wand, and every plot twist meets the dazzling radiance of an impeccable make-up and perfect styling of the streaked mane.

All America knows the heroine as the face of the FBI, on the street they poke a finger at her and ask for autographs, but there was no happiness either: the microwave does not close well, and the boyfriend who started up in the first episode resigns the heroine, without even appearing in the frame , by phone.We have to fill the spiritual void with a strong female friendship, starting with seemingly irreconcilable racial and psychological friction between Gracie and her manly black colleague, assigned to her by a guard. As mutual antipathy transforms into its opposite without any explanation, the girls save the heroine’s kidnapped girlfriend, the current queen of American beauty in a diamond kokoshnik.

The crime story sucked out of the thumb is, of course, just an excuse for Gracie Hart to show her empathy and other commendable qualities, which, coupled with long legs, earned her the title of “Miss Congeniality”.However, in five years everyone has already forgotten what kind of congeniality was meant, and now the authors of the picture put into this word about the same meaning as Ostap Bender, who said to Vorobyaninov: “Congenial, Kisa!” Now this exclamation can be picked up by the many fans of Sandra Bullock, who sympathize with her, no matter how hopeless the film industry she gets into. It is not difficult to understand them: her grimaces and grimaces really win over and awaken sympathy, but she jumps, runs, kicks and kicks, she is still very fervent and in her forties.

In order not to jump like that until fifty and move a little away from the role of funny girls, the eternal miss was going to star in the tough boxing film “Million Dollar Baby” for a long time, until every now and then the postponed project sailed away to another director and another actress. And Sandra Bullock, instead of an adult tragic story, had to get into comic lurex and pink feathers again to teach teenage girls how important it is to be yourself. But our girls don’t have to be fired on a fake: they have before their eyes the unthinkable fate of policeman Oksana Fedorova, who literally threw her Miss Universe crown in the face of the organizers of the competition.

Evgeny Mironov: ‘Pinch me!’ | Press

For several years, the troupe of the Moscow Theater of Nations, headed by Yevgeny Mironov, wandered around other people’s venues, while reconstruction was underway in their native walls. And finally, the renovation is complete! The long-awaited holiday began with the visit of Prime Minister Vladimir Putin, who was entrusted with driving an old silver coin into the new stage – according to omens, this should bring the theater a good box office. And in the evening Mironov met his friends – actors and directors, with whom he started on other venues.

“Come on in, please do not hesitate. Look around, look, appreciate … – the hospitable artistic director was beaming with happiness and personally guided tours of the building, still smelling of paint. – Go up to the second floor in the foyer, look into the wardrobe, do not pass the buffet. I want you to see everything we have done. It’s hard to believe that you will no longer have to beg the artistic directors of other theaters to rent premises for rehearsals and performances. We now have our own home again, so modern and beautiful.Everything that is happening now is a magical dream. Pinch me! ” – Mironov smiled.

Those who helped during the reconstruction – some morally, some financially – came to congratulate Yevgeny Vitalievich on the opening of the Theater of Nations. Leonid Parfenov was accompanied by his daughter Masha: “I am terribly happy for Zhenya! He kept repeating that he would not live to see the completion of the renovation. When he first entered this building, there was a feeling that a bomb had fallen here. But all the difficulties are over. ” All the guests tried to personally congratulate Yevgeny Mironov, someone talked to him for a long time, like People’s Artist Alexander Kalyagin, and someone just ran up, smacked on the cheek and hurried to further inspect the theater, like Fyodor Bondarchuk and Vladimir Mashkov.Marina Golub had to stand in a whole line to have a heart-to-heart talk with Mironov: “Of course, you can’t get close to Zhenya. For me personally, today is a triple holiday. Firstly, I am very happy for Zhenya, he is an amazing person and a unique actor. Secondly, my daughter Nastya works as a producer at the Theater of Nations, and she organized tonight. And thirdly, they restored the stage on which I, while still a student, performed, because earlier this building was a branch of the Moscow Art Theater. That is, I also had an evening of pleasant memories of my youth ”.“Yes, this is where I took my first steps, while I was a student,” Igor Vernik said to his fiancee. “If you are invited to play at the Theater of Nations, it’s an honor. ”

The whole evening Yevgeny Mironov did not even sit down. Moreover, many have noticed that he walks with a limp, leaning on a cane. This year, the actor seriously injured his leg and underwent surgery in Munich. “Not everyone knows about the injury yet and they wonder why I walk around with a cane. Some people think that it was for the sake of solidity that I started the wand, after all, I am an artistic director, it seems to me that it should be, – laughs Mironov.- No, the cane will not last long, and the leg will heal soon. This is not the main thing! Our theater was reconstructed – and we returned home. I’m happy!”

Rechargeable sprayer WORKHORSE LG 05 SS

Rechargeable sprayer WORKHORSE LG 05 SS.

GALLON SPOT SPRAYER

5 Gallon Polyethylene Tank
Pump intake 1.0 gpm
Pistol with lever
Rechargeable battery 12 V
AC charger with integrated storage compartment
Telescopic handle
Large 8 ” Wheels

MOUNTING

REAR COMPARTMENT ASSY

Parts List
ITEM	Quantity	ROOM	DESCRIPTION
1	1	610000	5 gallon tank
2	1	610001	5 Gallon Reservoir Cap
3	1	610002	Rear Panel
4	1	610003	Charger panel door
5	2	610005	φ3 / 8 ″ axle mounting bracket
6	2	610004	Wheel
7	1	610013	φ3 / 8 ″ x 14 7/8 ″ Axel
8	2	610019	φ3 / 8 cap nut black
9	6	610017	Screw 1 / 4-20 x 1/2 “cylindrical head
10	2	600151	Clamp for stick
11	2	600152	Stick clamp screw

PUMP, HOSE AND BATTERY ASSY.

PARTS LIST
I TEM	Quantity	PART #	DESCRIPTION
1	1	600139	V 3400 P
2	4	600149	Pinch Clamp
3	4	600199	Screw TEK # 8 × 3/4
4	1	610002	Rear Panel
5	1	610006	Pull-out handle, assy.
6	1	610011	Suction hose 1/4 inch
7	1	610012	Assembling an economical stick
8	1	610023	W 406
9	2	610024	EL14QD
10	1	610026	C 1400 CP
11	1	610033	Assembly of a set of wires
12	1	610039	Lithium battery
13	1	610040	Adapter for foam battery
14	1	640454	Pump QA 1. 0 gpm
15	1	610041	Li-ion battery

GENERAL

The purpose of this manual is to assist you in the assembly, operation and maintenance of your sprayer. Please read it carefully as it contains information that will help you achieve years of reliable, trouble-free operation.

BATTERY CHARGING

It is recommended to charge the battery for 8-10 hours before use or if the battery has been stored unused for 6 months or more.Once fully charged, you can spray 40 gallons of fluid or 8 tanks in a row.

To charge the battery …

Connect the charger to a 110 volt AC outlet.
Insert the plug on the opposite end of the charger into the charging socket located on the back of the sprayer.
When charging is complete, reverse the above steps.

WARNING: Never leave the charger connected to the battery for more than 20 hours, as this can damage the battery.

RUNNING

This sprayer can be pulled or pushed by hand.
Pour the solution into a container and stir. Liquid chemicals can be mixed by spraying a gun into the tank.
Turn switch to ON and spray by pressing trigger on gun. The device is equipped with a pump on request, which will only operate when the pistol grip is pressed.

Precautions for use

Do not operate the pump in an explosive atmosphere.
Spark from motor brushes, switch, or excessive heat from a malfunctioning motor can cause an explosion.
Do not pump gasoline or other flammable liquids.
Do not assume compatibility with liquids. If the fluid is incorrectly matched to the pump elastomers, leakage may occur.

AFTER SPRAY

After use, fill spray bottle halfway with water. Turn on the sprayer and allow clean water to flow through the plumbing system and out through the spray tube. Fill the reservoir to about half full with plain water and use a chemical neutralizer such as Nutra-Sol® or similar and repeat the cleaning instructions. Flush entire sprayer with neutralizing agent. Follow the chemical manufacturer’s instructions for disposal of all rinse or rinse water.

WINTER STORAGE

Drain all water and chemicals from sprayer, paying particular attention to pump and valves. These items are especially susceptible to chemical and frost damage.Before storage, the sprayer must be prepared for winter by passing a solution of RV antifreeze through the entire plumbing system. Proper care and maintenance will extend the life of your sprayer.

WARNING: This Product may expose you to chemicals, including lead, which is known to the State of California to cause cancer. www.P65Warnings.ca.gov

TROUBLESHOOTING

The pump is not working:

Check the fuse next to the power switch.In case of explosion or damage, replace with a new 5 Amp fuse.
Make sure the battery is fully charged.
Make sure the on / off switch is in the on position.
Make sure there is no debris on the strainer at the bottom of the tank.
Make sure there are NO kinks in the inlet / outlet hose.

WARRANTY / PARTS / SERVICE

Workhorse products are warranted for a period of one year from date of purchase to be free from defects in workmanship or workmanship for personal use or homeowner use with proof of purchase.Workhorse products have a 90-day warranty for commercial users. Any unauthorized modification of a Workhorse sprayer will void the warranty.

Your authorized dealer is the best source for parts and services. To get fast and efficient service, always remember to provide the following information:

Correct part description and part number.
Model number of your sprayer.

Part descriptions and part numbers can be found in the Illustrated Parts section of this manual.

If you need parts or repairs, please contact your distributor / dealer first. For warranty work, always bring your original sales receipt or other proof of purchase date to your distributor / dealer.

Important Return Safety Instructions:

When returning your pump for warranty or repair, you should always do the following:

Wash off chemical residues from the device.
Tag block with type of sprayed chemicals.
Include a complete description of the problem in operation, such as how the device was used, the symptoms of the problem, etc.

Since the installation may contain residues of toxic chemicals, these steps are necessary to protect all people handling return shipments and to help pinpoint the cause of failure.

Documents / Resources

Case

Related Guides / Resources

90,000 Intimate curiosities, or fetishists also like to eat

History 1
The order came from one of the permanent high-ranking Ukrainian “rulers”.It was necessary to cajole specific tastes and even surprise the delegation from Japan. By 20:00 pm, the sauna was heated, and my mother was finishing putting all kinds of sushi on me. The nipples were covered with funny shaped saucers and each of my nipples was the center and crown in the ocean of Japanese sauces.

The guests have arrived. Quickly walked through all the meet and greet ceremonies. The parents wished a pleasant meal and left. The Japanese delegation immediately sat down to eat a variety of dishes from me, washing it down generously with Ukrainian vodka.Sometimes some of them allowed them to pinch my nipple with sticks. When the main refectory session was over, they sent me to the shower to quickly rinse off the remnants of food. Then I returned to the table in the same position, just spread my legs and folded them into something reminiscent of the lotus position. The second part of the ordered fun began.

Someone went to the sauna, and the most playful armed with chopsticks began to study me between my legs. They pinched my clitoris, parted the outer and inner lips, gently penetrated with sticks into me, trying not to harm.Then the ass was also studied. Here we stayed a little longer on intercourse with chopsticks. Then they began to pour vodka on me and lick it off me. Then they smeared the wasabi’s nipples and clitoris and licked me. It was unpleasant and burned a little. They sent me to the shower again. The fetishists went to steam, and two wrestlers came from the steam room. Silently they took me to the rest room. They laid me on my stomach on the bed. One pillow lay under my chest, a roller under my thighs. Grease poured onto the ass. The one behind, roughly smeared it and entered without ceremony, so that the ate had time to relax and breathe at least a little.Invocatively open from pain and sharply filling the intestines of the penis, the mouth immediately occupied the second Japanese genital organ. I didn’t resist. I relaxed as much as possible. I gave myself as much as possible. Made it as pliable as possible. They felt and began to fuck as everyone likes better. The rear one came in and out with a sweeping pace, each time leaving only the head in my ass. Sometimes he took it out completely and with a light “chpok” sharply drove back. The front man, holding me with his hands behind the back of the head and under the chin, fucked my mouth with his penis so that the head rubbed against my sky every time and gently entered my throat.It caused slight gagging and tickled, but it seems I got a master, because I could not vomit, not laugh.

After ten minutes of such intercourse, my ass was filled with warmth, my stomach ached and I twitching convulsively on two penises, with great pleasure finished anally, briefly catching the subspace. Such a state, everything around is blurry, warm, comfortable, pleasant, lie down in bliss and fly away. Some drugs are said to have this effect.

I was pulled out of the subverse abruptly and suddenly.A rear jerk took me off the front one, turned me over onto my back, threw my legs onto his shoulders, and again plunged into my ass, throbbing after orgasm. Immediately received a light slap of the penis on the forehead, then on the cheeks. The trunk floated over the eyes, then the shriveled scrotum and the shriveled ring of the Japanese anus appeared. Sitting down over my face, he invitingly spread his legs even more, giving me perhaps not to strain by raising my head. I have nothing against anilingus, but when a body that is not too washed is allowed to be licked, it is certainly annoying.But there is nothing to do. I was glad that there was no human waste, but only the natural smells of an unwashed body and sweat. Licked hard. Legs and ass flew even higher. The penis in the ass accelerated and the hot stream of semen began to fill me from the inside. A little later, the wrinkled skin of the Japanese ass over my tongue throbbed, the skin tightened, the scrotum shrank even more, spasms went down my thighs and drops splashed on my stomach. They put me back on the bed. The front one got off and went into the shower. The back one, being already relaxed, still remained in me.I reached out, tucked my hands behind my head and stared at him. And he squeezed as much urine as possible into my pelvis, still holding the withering himself inside me. After some time, he left the hospitality of my malleable popencia and took me on his shoulder, stuffed my ass with his finger and took a shower. It was funny to ride on a man’s shoulder with his butt plugged in with a finger.

The whole company was gathered in the shower. One Japanese man lay down on the shower floor. I was squatted over him and ordered to push. Sperm began to leave my intestines, and the Japanese from below tried not to miss a drop, catching everything with his mouth.At that time, my slender body and face were poured over with odorous male urine by several penises. Golden rain. Not the most pleasant thing. That was the end of it. I was sent to the shower for the last time. Then everyone took a steam bath together. In practice, the guys turned out to be quite interesting interlocutors. Not everyone knew English, but still we managed to have an interesting conversation. Then I was presented with an Afigen real kimono, in which I was immediately dressed. Comfortable clothes.

Morning. I woke up in my room.Under a kimono blanket. My sister sits in a chair with my laptop. Mom asked me to watch what I wake up after yesterday. We went downstairs. Mom makes coffee, dad smokes a cigar with the one that took me in the ass yesterday. My sister and I were all greeted. She sat down in her favorite chair. Instead of the usual cup of coffee, I got a glass of milk. Why would I have cold milk in the morning? And why in a glass? Nearby, a sister giggled and grimaced, happy smiling Japanese faces appeared around. Sniffed. Oh god, a full glass of cool semen from the fridge.Mom just nodded imperceptibly. I drank it in one gulp. Still, it’s no stranger to swallowing semen. It’s good that I love her and do a blowjob.
– Campai !!! – Satisfied Japanese faces continued their morning discussion of all sorts of important things at breakfast.

She went into the shower. Cum and espresso churned in my stomach. Sister came in inaudibly. She lathered a washcloth and began to gently massage my shoulders. It’s good when there are loved ones …

History 2

I can’t say anything about this person.I only know that he is some kind of important diplomatic person from the Russian Federation. A person who worked in high diplomatic posts back in the USSR and he was very important, held in high esteem, etc.

Vika and I were just in the process of home fitness. Mom, in a commanding tone that did not tolerate discussion, sent me to the shower. It was required to wash and clean out in all places as abundantly as possible. While they were preparing, the dear guest had already arrived in the company of our patron and one more official who is permanently in power, now the 4th president.Mom came to the shower for us. Without unnecessary decorations and ceremonies, she took us naked into the hall, where dad had already given expensive drinks to no less dear guests. The men immediately appreciated the sight of two naked, freshly washed girls with exclamations, compliments, anticipating claps. Vikusya, as always, fluttered on her knees to the protector, while I was seated in the arms of the main character.

Since I entered the family business, I have ceased to be particularly surprised at all kinds of fetishists and perverts, but this person was still able to surprise.Moreover, I still do not understand how to perceive this for myself. His desire was that Vika and I would serve that evening as cocktail coasters.

Heaps of pillows were laid on the floor next to the sofa. Vika and I lay on our necks, head down and resting our backs on the sofa, and feet up. The vaginas and anuses were lubricated and some kind of plastic wide test tubes were inserted there for analysis. Mom then filled them with alcohol. I left ice, bottles and snacks and my parents left, and we were left standing almost on our heads, legs apart, with plastic cups in our pisses and priests, and men sometimes taking out these “wine glasses” from us, drinking, discussing various matters, and returning “Wine glasses” in place.It is a little unpleasant when a rather thick, about 5-6 cm in diameter, “wine glass” is casually returned back. On the other hand, you relax when they pull it out. Vika was the first to whine that her neck was numb and dim in her eyes. We were immediately turned upside down, laid on pillows and put our feet on us. 15 minutes rest for recovery and upside down again. After a fair amount of drunk, a highly respected diplomat, with the help of his dad, trudged off on wadded feet to the guest room to sleep. The more “experienced” general carried the weeping (she knows how to pity) Vika to her bedroom to continue the banquet tête-à-tête.I was freed from the “wine glasses” and sent with the “usual politician” to swim in the pool. End.

History 3

Have you ever seen a suitcase full of money? Whoever saw it knows how fascinating it is, even if they explain the conditions under which this very suitcase can be obtained.

This person came with one of our regular pet clients. The request was strange, inadequate, impressive, appetizing and suspicious at the same time. The visitor brought with him two huge Alaskan malamutes.I saw malamutes, but these were just like forest spirits in the embodiment of giant wolves. The man provided all the required certificates that the dogs are healthy. And he offered his conditions, which were as follows. If the four of us can eat more than he alone, then the suitcase with an appetizing amount migrates to us without any actions of an intimate nature. If he eats more, then his dogs will cover one of us as much as they can manage, and then he will estimate how much money will fall into our pocket. I don’t think it’s worth writing that with all our efforts, this man turned out to be just a bottomless bag and ate as if from hungry lands.As well as the fact that I am the most experienced in the zoo for the role of working out our loss.

Both clients spent the night with us. Some who had a very gluttonous half of the night were tormented by the toilet, and in the morning they looked very unattractive. By the evening, however, he reached a condition with the help of a sauna, a swimming pool and a walk in the fresh air. But I started to worry a little. A special condition was that his dogs in the intervals between fucking me, would be supported by raw meat. Our regular zoo confessed to me that the meat is flavored with hormones to make dogs just monsters in sex.

In the evening in the common room, in front of everyone present, I got up with cancer and the little dogs sniffing at me a little and freeing their tips from the fur bags began to tear me up in turn. They tore whoever went where. They pounded hard, skillfully, skillfully, enjoying the process. In the intervals, while I was trying not to crawl off the couch, convulsively holding onto the straps, pouring dog sperm from the holes and being half-prostrated from pain, orgasms and semi-fainting, the dogs lay and ate their meat.And then they again fought me, who had come to my senses a little. At some point, I just turned off and turned on only when there was a pause or another dog’s dick burst somewhere between my legs. The last thing I remember is how my mother held me under the shoulders in her lap, the dog’s face on her shoulder and my mother’s whisper “be patient, little one, it won’t be long.”

I woke up a day later in the hospital. Something was dripping through the drip. The whole body was kind of dumb. Between the legs, everything was wrapped in some kind of solid cotton ball.We got all the money. I left for two weeks, then I worked with a psychologist for another two months. After that, at the family council, in the presence of the main and secondary patronizing persons, the system of our work, permissiveness, our purchases and, in general, the system of liberties was completely revised. Because of these revisions, we have lost about 15% of the clientele, however, we have secured ourselves from such situations.

Author: mashka_sagarda

Zenit – “Loko”: the temperature of the struggle shows 40 … – Sports

“Hold me, straw, hold me!” – The recognized diva, as they joked among the people, of the “Pugacheva era” during the reign of Leonid Ilyich, once performed a pleadingly piercing performance…

Yes, literally for this saving tournament blade of grass seized in the last 19th round before the winter holidays, St. Petersburg “Zenith”. The Russian championship that began so much for its health that almost everyone began to give gold medals to the ex-champion in advance, the club from the banks of the Neva, contrary to its name, suddenly left the victorious orbit …

Interspersed with two defeats in a row a whole autumn bouquet of draws (seven lose-lose matches), Zenit after the 18th round lost the lead in the table to Lokomotiv.The “armored train” from Cherkizov, which gained a stunning speed, under the iron leadership of the first-class Belarusian “machinist” Leonid Stanislavovich Kuchuk, before the last vacation run, overtook the residents of St.

That is why last Friday evening in the stands of “Petrovsky” at only + 1 ° C Celsius, mixed with snowfall, a very impressive cheerleader audience gathered for a working day – 16 775 people.

On the one hand, people said goodbye to football until the March calendars.Who has forgotten the school history of the ancient world, I remind you: this is the name of the first day of the month among the ancient Romans. From this Latin word we got “calendar”.

On the other hand, the fans of “Zenith” hoped for a finally victorious outcome of the fight for their favorites. The Ural players who came to “Petrovsky” in the first round in Yekaterinburg lost in a bitter struggle – 1: 2. Looking ahead, I will say that at the end of the match the same numbers were on the scoreboard this time too.

By no means the most impressive game of the hosts, the guests opposed the struggle on every meter of the field, not at all shy in front of one of the leaders.On the Hulk’s goal (12th minute), after the intermission, the Urals scored a return goal (Spartak Gogniev, 55th) as a result of the designated penalty kick against Zenit (Spartak Gogniev, 55th) – 1: 1. Before the St. Petersburg team loomed the unhappy prospect of a fifth draw and at least another continuation of a losing streak, if not for the Belgian duo in the hosts. On the 75th minute, Axel Witsel hung the ball into the Urals penalty area, which, without greed, let Alexander Kerzhakov go further right on the leg of Nicholas Lomberts. The defender kicks off the guests’ goalkeeper Alexei Solosin with a blow from the summer.Zenit wins – 2: 1.

By this day, the draw for the 2014 World Cup was expected to take place in faraway Brazil in a day. Later it became known that we are, among other rivals, in the same group with the Belgian national team. Thus, a number of the St. Petersburg players of the Russian team will have Axel and Nicholas as rivals. As the saying goes, “their own among strangers”, which experts already consider to be the favorites of the group.

In light of the upcoming Brazilian duel between Russia and Belgium, the opinions of Axel Witsel, expressed by the midfielder in an interview with the Rossiyskaya Gazeta correspondent in St. Petersburg, are interesting.First we talked about “Zenith”, about its current not very successful game.

“We started the championship very well. But now we have slowed down. It’s hard to explain all this: the team works a lot,” Axel replies.

The Belgian also does not believe that the departure of Igor Denisov has an impact.

In Russia, the midfielder, it turns out, quickly adapted to the local weather: “In Belgium, there is also winter … sometimes it reaches -15 °. And yet in Russia it is colder and more windy.”

Having played football since the age of nine, Axel was immediately confident that he would grow into a leading player, including the national team.Since the conversation was going on before the Brazilian draw, then when asked if he would like to play against his colleagues in the St. Petersburg team, Witsel replied: “It’s a good option. It would be cool to meet with the guys from Zenit. You now have a great coach, Capello, and the national team came out in the qualifying group from the first place “.

Now, perhaps, the wish of Axel Witsel and Nicholas Lomberts will come true. In any case, according to Roman Shirokov, the Belgian midfielder told him that he would not spare us…

At the same time, Lomberts, who is five years older than his compatriot, cautiously remarked: “Yes, our team is strong, but Russia should not be underestimated either.”

Let’s leave the upcoming Brazilian battles. As they say in Russia, it is still necessary to live to this day. Better back to the weekdays of the last tour.

It opened on Friday evening in the capital of the Kuban, where CSKA arrived to the local “Krasnodar”. The army men who close the quartet of leaders scored 34 points by this day, while the hosts’ points baggage (30) gave them the right to hold on to the sixth position.So even if Krasnodar succeeded, he would not have succeeded in displacing Muscovites from fourth place.

But the southerners managed to win against CSKA, albeit in a difficult struggle. Whatever one may say, the absence of their shock “magic wand” – the Ivorian striker Seydou Dumbia – affected the army. Alan Dzagoev, who finally recovered in the 38th minute, replaced Keisuke Honda, after a long pause in the game, he could not help his native club.

The only goal in the 63rd minute was scored by a 190-centimeter Polish midfielder – hero Artur Jendzhejczyk – 1: 0.

The army team spent the entire end of the match in an incredible siege of the southerners’ gates. Of the 14 shots in the hosts’ frame, seven hit the target (while Krasnodar had six). But, alas, it was not CSKA day …

On Saturday, Cherkizovo hosted a match that can be considered central in the round: Lokomotiv played host to the most stubborn and stubborn, like a hedgehog, club of our Premier League – Kazan Rubin. In the first round in the capital of Tatarstan, the coaching duel of two thoughtful and strong-willed mentors Kurban Berdyev and Leonid Kuchuk ended with the success of the Belarusian specialist.

But it was not only and not so much about revenge. In case of victory at home, “Loko” overtook “Zenith” and left for the winter holidays as the sole leader. In addition, Muscovites would become, albeit unofficial, “winter champions”. A circumstance that would give them a psychological advantage in the further struggle for the medal podium of the Russian Championship.

But the stubborn uncompromising duel “Loko” – “Ruby” ended in a goalless draw. Let in the course of the reportage there was an impression that the Muscovites were closer to victory.But the citizens of Kazan were also brave. Relying on visual perception is not always correct. As they say, the game is forgotten, but the final score remains: here it is, on the scoreboard – 0: 0.

“Loko”, gaining 40 points, is compared in terms of points with “Zenith”, inferior to him only in a personal meeting in the first round. And this is a huge, albeit intermediate, success. Since 2006, the red-greens have not been in the top three, four times out of six ranked seventh and below.

All successes became possible only after Leonid Stanislavovich Kuchuk took the helm.And I believe that he is not dissembling when he says: “I am worried about the team’s play, not the first place. If there is a game, there will be first place.”

Loko President Olga Yuryevna Smorodskaya was once asked by journalists about the term of the head coach’s contract. “Railway Lady” calmly replied: “This is confidential information, but considering the results of the first round, I can say that Leonid Kuchuk will work with Lokomotiv as much as he wants.”

Bravo, Leonid Stanislavovich!

The match of missed scoring chances, and therefore winning opportunities, should be called the meeting in Rostov, where the Donchaks hosted Spartak.The home team’s advantage over the red-and-white ones was sometimes so overwhelming that I wanted to pinch myself: “Is it really Spartak?”

It ended, however, according to the old football belief: “If you do not score, they score for you!” In the 87th minute, the forward from Ghana Majid Waris breaks through the guard of the Don gate and the Croatian national team Stipe Pletikos – 1: 0.

“Spartak” is gaining 39 points and is still breathing in the back of the head and “Zenith” and “Loko”.

But the army team rolls back to fifth place.The quartet of leaders is closed by “Dynamo” / 35 points /, which beat Perm “Amkar” on Sunday at “Arena-Khimki” – 2: 0 (Kevin Kuranyi, 56th and 76th minutes, from the penalty spot).

The rest of the matches ended like this: Volga – Wings of the Soviets – 1: 2, Anzhi – Kuban – 0: 0, Terek – Tom – 2: 0.

Tournament table

Place I B N P Balls Points

1. Zenit 19 12 4 3 40:20 40

2. Lokomotiv 19 12 4 3 37:16 40

3.Spartak 19 12 3 4 37:20 39

4. Dynamo 19 10 5 4 32:21 35

5.CSKA 19 10 4 5 24:19 34

6. Krasnodar 19 10 3 6 30:24 33

7. “Amkar” 19 8 6 5 22:20 30

8. Rostov 19 6 6 7 23:24 24

9. “Kuban” 19 6 6 7 25:26 24

10. Krylia Sovetov 19 5 9 5 20:23 24

11. “Rubin” 19 5 9 5 21:14 24

12. Volga 19 5 3 11 17:37 18

13.”Tom” 19 4 3 12 13:28 15

14. “Terek” 19 2 7 10 13:23 13

15. “Ural” 19 2 6 11 16:37 12

16. Anji 19 0 7 12 12:30 8

Scorers:

Yura Movsisyan (“Spartak”) – 12 (2 from the penalty spot)

Artem Dzyuba (“Rostov”) – 12 (3)

Danny (Zenit) – 10

Dame N’Doye (Lokomotiv) – 10

Hulk (“Zenith”) – 9

Seydou Doumbia (CSKA) – 9 (2)

Spartak Gogniev (Ural) – 8 (1)

Georgi Peev (“Amkar”) – 8 (6)

Ibrahima Balde (“Kuban”) – 7

Wanderson (Krasnodar) – 7

Andrey Voronin (Dynamo) – 7 (3)

In the 20th round there are:

March 8: Dynamo – CSKA, Terek – Spartak, Zenit – Tom, Lokomotiv – Wings of the Soviets, Rostov – Kuban, Anzhi – Rubin, Amkar – Volga, Krasnodar – Ural.

And more. About the so-called 12th player, that is, about the fan. Real connoisseurs of a leather ball meet less and less on our football arenas.

Instead of support, helping to win, giving the players strength, the stands, stuffed with near-sports punks, exude rewind swearing, reducing matters to brawls, and even massacres.

Soon, according to the Russian Ministry of Internal Affairs, this whole orgy will come to an end. A draft of the relevant instruction has been prepared by law enforcement agencies.

Those who riot in the stands today will be blacklisted by the police and will not be allowed into the stadiums.

Compilation of a single list of hooligans – “disenfranchised” – is entrusted to the main department for ensuring the protection of public order of the Ministry of Internal Affairs of Russia.

The police forwards this information to the Ministry of Sports, which is in charge of ticket sales.

In addition to fines, an administrative ban is introduced on attending sports events from six months to three years.

Leave a Reply Cancel reply

Cool lax sticks. Mastering Chopsticks: Your Guide to Proper Technique and Japanese Rice Varieties

Cool lax sticks. Mastering Chopsticks and Japanese Rice: A Comprehensive Guide

Cool lax sticks. Top 8 Crab Stick Brands: Quality, Taste, and Nutrition Compared

Harrow lax sticks. Harrow: An Ancient Agricultural Tool with Deep Cultural Significance

Cool lax sticks. Top 8 Crab Stick Brands: Quality, Taste, and Nutrition Compared

Lax stick rack. Lacrosse Stick Storage Solutions: Innovative 3D Printed Designs and Wall Mounts

You may have missed

Nike 2.0 shirt. Nike Dri-FIT: The Ultimate Performance Gear for College Sports Enthusiasts

Anthony o shea. Anthony O’Shea: From Charlestown Bank Robber to Prison Reformer – A Tale of Regret and Redemption

Diabetes camp rochester ny. Camp Aspire: Empowering Youth with Diabetes in Rochester, NY

Brine lacrosse helmet size chart. Ultimate Guide to Lacrosse Equipment: Sizing, Safety, and Selection Tips

What Are Pinch Sticks and Why Are They Important in Woodworking?

Key Features of Pinch Sticks:

How Do Pinch Sticks Improve Accuracy in Woodworking Projects?

Benefits of Using Pinch Sticks for Accuracy:

What Are the Advantages of Using Pinch Rods Over Traditional Squares?

Comparative Advantages of Pinch Rods:

How to Make Your Own Pinch Sticks: A Step-by-Step Guide

Tips for Optimal Pinch Stick Design:

Mastering the Use of Pinch Sticks in Furniture Assembly

Steps for Using Pinch Sticks Effectively:

Advanced Techniques: Using Pinch Sticks for Complex Woodworking Projects

Advanced Applications of Pinch Sticks:

Maintaining and Caring for Your Pinch Sticks to Ensure Longevity

Essential Pinch Stick Maintenance Tips:

Integrating Pinch Sticks into Your Woodworking Workflow for Optimal Efficiency

Strategies for Integrating Pinch Sticks:

Heartwood » Blog Archive » Pinch rods

Handsome & Co. | The Handsome & Co Educational Taster: Pinch Rods

The Handsome & Co Educational Taster: Pinch Rods

How to Cut a Watermelon

Prefer To Watch All The Ways Instead Of Read?

How To Cut a Watermelon Like a Pro

The Basic Cube Cut

The Triangle Cut

The Stick Cut

The Fancy Cut

The Party Trick

Is It Better To Cut a Watermelon Warm Or Cold?

How Long After You Buy a Watermelon Should You Cut It?

How Long Is Cut Watermelon Good For?

How To Pick Out a Good, Juicy Watermelon

How Do I Know When a Watermelon Is Ripe?

Can You Eat Watermelon Seeds?

Favorite Watermelon Recipes We Love

Did You Know These Stick Bug Facts?

Control Methods: Thumbs vs. Pinch

Thumbs

Pinch

Hybrid Pinch

Conclusion

Author: GetFPV

Post navigation

Baked Chicken Drumsticks (tender, juicy, easy!)

How to prep and season chicken legs

How to bake chicken drumsticks

What to serve with baked chicken drumsticks

Baked chicken drumsticks recipe

Baked Chicken Drumsticks

Ingredients

Instructions

Recipe Notes

Epidurals (for Parents) – Nemours KidsHealth

What Are Epidurals?

How Are Epidurals Done?

p

What Are the Risks of Epidurals?

Will an Epidural Affect My Baby?

How Will I Feel After Delivery?

How to hold Chinese sticks correctly

Evgeny Mironov: ‘Pinch me!’ | Press

Rechargeable sprayer WORKHORSE LG 05 SS

MOUNTING

REAR COMPARTMENT ASSY

PUMP, HOSE AND BATTERY ASSY.

GENERAL

BATTERY CHARGING

RUNNING

AFTER SPRAY

WINTER STORAGE

TROUBLESHOOTING

WARRANTY / PARTS / SERVICE

Documents / Resources

Case

Related Guides / Resources

Related Porn Stories

Zenit – “Loko”: the temperature of the struggle shows 40 … – Sports

Leave a Reply Cancel reply

Related Stories

You may have missed