LA CROSSE TECHNOLOGY WT-966B SETUP MANUAL Pdf Download
WT-966B WWVB—RADIO CONTROLLED WATCH
ABOUT WWVB (Radio Controlled Time)
The NIST (National Institute of Standards and Technology—Time and Frequency
Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the
exact time signal continuously at 60 kHz. The signal can be received up to 2,000
miles away through the internal antenna in the La Crosse Technology watch.
However, due to the nature of the Earth’s Ionosphere, reception is very limited during
daylight hours. The Watch will search for a signal every night when reception is best.
The WWVB radio station derives its signal from the NIST Atomic clock in Ft. Collins,
Colorado. A team of atomic physicists is continually measuring every second, of
every day, to an accuracy of ten billionths of a second per day. These physicists have
created an international standard, measuring a second as 9,192,631,770 vibrations of a
Cesium-133 atom in a vacuum. This watch is regulated by the WWVB transmitter.
For more information on WWVB and the NIST Atomic clock please visit their website
at http://www.boulder.nist.gov/timefreq/stations/wwvb.htm
SET-UP GUIDE, FEATURES, AND OPERATION
TIME LCD
SET-UP
Your new radio-controlled watch may arrive to you already set. The default (factory)
setting is Eastern Time zone, Daylight Saving Time On and 12-hour time format. You
can tell if your watch has received the WWVB signal by looking for a tower icon in
the upper right corner of the LCD display. If the tower icon is solid your watch has
received the signal and set the time and date. If you need to set your watch to any
other setting than the default or need to manually activate the WWVB search (only do
so if there is no tower icon in the upper right of the LCD) please follow the directions
that follow.
NOTES:
•
Do not press the TIME ZONE button while the watch is searching for the
WWVB signal, which normally takes 6-10 minutes.
•
If you are unable to receive the WWVB signal during the daytime please
manually activate the WWVB search (see section II).
•
The optimal time for WWVB reception is between midnight and 6:00 a.m.,
reception may not occur until this time period.
•
When the WWVB search is complete the time and date will automatically be
displayed in the LCD.
•
If the watch is not within range of WWVB signals for an extended period of time
it will still continue to operate as a accurate quartz controlled watch.
I.
TIME ZONE SELECTION
The default time zone is Eastern Time (EST, also GMT-5). There are 25 Time Zones
to choose from. The selection will cycle from GMT-5 (EST) to GMT-12, then
GMT+12 to GMT +1, then GMT, then GMT-1 to GMT –5 (EST).
1.
Hold down the TIME ZONE button for 2 seconds or until a time zone
abbreviation and “ZONE” flash in the LCD.
2.
Repeatedly press and release the TIME ZONE button until the
appropriate Time Zone is displayed.
3.
Wait 8 seconds for the automatic time-out to exit the time zone
selection mode.
“Hawaii Time displayed
(GMT-10)
Atlantic Time (ATL):
GMT-4
Eastern Time (EST):
GMT-5
Central Time (CST):
GMT-6
Mountain Time (MST): GMT-7
Pacific Time (PST):
GMT-8
TIME ZONE key
Alaska Time (ALA): GMT-9
Hawaii Time (HAW): GMT-10
Greenwich Mean Time (GMT): GMT
II.
DAYLIGHT SAVING TIME (DST) AND 12- 24-HOUR TIME MODE
Through the WWVB signals, the watch automatically adjusts for Daylight
Saving Time. The default (factory) setting is Daylight Saving Time On and
12-hour Time mode. To change this mode:
1.
Press and hold the TIME ZONE button for 4 seconds
2.
“DST ON” and “12h” will be displayed in the time LCD.
3.
Press and release the TIME ZONE button to select the desired mode.
4.
The four selections are:
DST On, 12-h
DST Off, 12-h
DST On, 24-h
DST Off, 24-h
5.
Wait 8 seconds for the automatic time-out to exit the DST On/Off,
12/24-hour time selection mode.
NOTE: At this point your watch will begin searching for the WWVB signal.
This will always occur after entering the DST On/Off, 12/24 time mode setting.
III.
MANUALLY ACTIVATING THE WWVB SEARCH
You can manually enter the WWVB signal search mode by pressing and
holding the TIME ZONE button for 4 seconds. This will bring up the DST
On/Off, 12/24-hour time mode selection. You now can either select the DST
On/Off, 12/24-hour time mode you wish to be in, or wait 8 seconds for the
automatic time-out to return to the time display and begin searching for the
signal.
IV.
LOW BATTERY INDICATOR
The watch is supplied with, and powered by a high quality 3V lithium battery
with a life expectancy of over 2 years. There is a low-battery indicator that
appears between the minutes and the date when the battery is low. The
battery should be replaced within 2 months of the appearance of the low-
battery indicator.
V.
MAINTENANCE AND CARE
Under normal conditions, the watch is shock resistant, however avoid
excessive “rough” treatment of the watch as this may cause serious damage.
Clean the watch with a soft dry cloth, or with one moistened with a mild soap
solution. Do not use any chemical cleaning solutions, these may cause
permanent damage to the watch’s surface. While the watch is water resistant
to 100 feet, do not submerge in water for extended periods of time.
VI.
ADJUSTING THE STRAP
The metal/plastic strap is adjustable to fit most all wrist sizes. You may either
take it to a local jeweler for adjustment, or perform the following steps. The
strap is adjusted by removing/adding equal number of links on either side of
the butterfly strap (or either side). The links are held in place by a small pin.
1.
Use a small tool (a paperclip also works) to press out the pin(s) in the
direction of the arrow on the link.
2.
Remove the pin on the other side of the link to remove the link.
3.
Press the pin back in place in the direction of the arrow.
4.
Repeat as necessary.
Lacrosse Watch Repair, Overhaul/Movement, Crystal & Battery Replacement Service
REQUEST FREE ESTIMATE! >>
Fast, FREE estimates
Expedient Service
Swiss-trained, in-house watchmakers.
Maintained stock of Brand name parts
Over 30 years experience in quality watch repair
Convenient door-to-door service
Movement services backed by our 1-year limited warranty
Total Watch Repair is the fastest, easiest, and most convenient way to repair your Brand watch. Our commitment to excellence has earned us a reputation as a leading Brand watch repair company. Our highly trained watchmakers with over 30 years experience have the technical expertise to advise and guide our customers about their watch repairs and services.
How it works
SEND IN YOUR WATCH
Send your watch for a free inspection
CHECK IN & DIAGNOSIS
Our watch experts diagnose issues and send you an estimate for free
APPROVAL & REPAIR
Once approved, expert watch technicians repair your watch
TESTING & QUALITY CONTROL
After quality testing, your watch is delivered to your door
- SEND IN YOUR WATCH
Send your watch for a free inspection
- CHECK IN & DIAGNOSIS
Our watch experts diagnose issues and send you an estimate for free
- APPROVAL & REPAIR
Once approved, expert watch technicians repair your watch
- TESTING & QUALITY CONTROL
After quality testing, your watch is delivered to your door
Popular Service
Overhaul
Disassembly, deep cleaning and lubrication of all internal components
Crystal Replacement / Repair
Replacement of cracked, scratched, or broken crystal, resealing included
Crown Replacement
Missing or broken crown and stem replacement resealing included
Pusher Installation
Installation of pusher buttons and testing of functions
Water Resistance Certification
Water pressure testing is performed on water resistant watches
Band Repair
Replace broken links, pins, or clasp. Customized bands are also available
Polishing and Precision Cleaning
Expert cleaning and polishing on stainless steel AND titanium watches
Hand Restoration and Replacement
Replace or restore broken, water damaged, loose, or missing hands
Battery Replacement
Professional, factory battery replacement
- Overhaul
Disassembly, deep cleaning and lubrication of all internal components
- Crystal Replacement / Repair
Replacement of cracked, scratched, or broken crystal, resealing included
- Crown Replacement
Missing or broken crown and stem replacement resealing included
- Pusher Installation
Installation of pusher buttons and testing of functions
- Water Resistance Certification
Water pressure testing is performed on water resistant watches
- Band Repair
Replace broken links, pins, or clasp. Customized bands are also available
- Polishing and Precision Cleaning
Expert cleaning and polishing on stainless steel AND titanium watches
- Hand Restoration and Replacement
Replace or restore broken, water damaged, loose, or missing hands
- Battery Replacement
Professional, factory battery replacement
La Crosse Loggers – Home
What are the requirements to use the Stretch Internet portal?
If you’re on a desktop or laptop computer, we suggest using the latest
version of Chrome or Firefox. If you’re using
an alternate browser, please ensure you’re using the most updated
version of that browser. To access live
or on-demand video, you will need a download speed of at least 1.0 Mbps
(1,000 Kbps) for standard definition broadcasts and 3.0 Mbps (3,000
Kbps) for high definition broadcasts. You can measure your download
speed atwww.speedtest.net. Our broadcasts are also compatible on any
Apple mobile devices running iOS 7 or later and on Android devices
running OS 4.4.4 or later. If you’re wishing to view the broadcasts on
your TV, we suggest using AppleTV to wirelessly stream content from a
Mac or Apple mobile device – or connecting an HDMI cable from your
computer or device to your TV. While some Smart TVs can also be used to
access our streams, we cannot guarantee compatibility.
Are there multiple viewing options in the portal?
While viewing a broadcast on a tablet or computer, you will see either 2
or 3 icons at the right of the event description bar near the top of the
portal. The first icon provides a “full view” option with the video
presentation maximizing the portal. The second icon offers a split view
and is helpful if the client is utilizing any other features, such as
Twitter feeds or live stats updates. If you’re watching a live sporting
event and the client has live stats available, the third icon offers a
“stats heavy” window with rich statistical information and a minimized
video or audio player. Additionally, you can watch up to four events
simultaneously in the portal by clicking on any of the view icons at the
bottom of the video player, and selecting another available event.
Do I need to sign in or register to access an event?
If you’re attempting to watch a live or on-demand event that is free,
you generally will not be required to create an account or sign in. For
live events, simply click on the “Watch” or “Listen” icon and you’ll be
redirected immediately to the portal page for the event. If the portal
is set up on a pay-per-view or pay-per-listen basis, you will be
required to register or sign-in, and you’ll be guided through the steps
after clicking on the icon for any event.
Why am I experiencing low-quality audio or video?
If you’re experiencing video or audio playback that skips, freezes or
buffers, please ensure you have sufficient bandwidth and computer
resources available. Buffering can also occur if there are connection
issues on-site. If you’re not experiencing video or audio playback
issues, but encountering other issues, such as pixellated video or
distorted audio, there are very likely issues at the originating site.
We work proactively with our partners to address these issues and
are generally able to resolve them in a timely manner, but certain
conditions are outside our control. Please click the “Submit Support
Request” link inside the “Help” tab if you need assistance addressing
issues.
Are the live broadcasts available for archived viewing?
Archived broadcasts will be available in the “On Demand” tab of the
portal. Keep in mind that our staff manually edits and prepares the
archives for most audio-only events before they are posted to the
portal, so please allow up to 72 hours or more for those to become
available. Video archives are generally available almost immediately
following the event. Keep in mind that many clients choose not to
archive some or all of their events, or choose to password-protect
their archives. If you are asked for a password prompt, please contact
the client directly if you’re like to request access.
Who do I contact with a complaint about the broadcast production?
If you don’t have any issues with the audio or video playback, but have
a complaint about an element of the production, you can use the “Submit
Support Request” link inside the “Help” tab. While Stretch Internet does
NOT produce the broadcasts and makes no warranties about the content of
any broadcast, we can relay your comments or concerns to the school
producing the event. Examples of production-related complaints include
poor camera operation, mispronunciations, factual inaccuracies, etc.
Why are live stats not available for every game?
Our live stats modules utilize XML code generated by the software used
by the majority of colleges and universities. However, the only sports
that include live stats output are soccer, field hockey, volleyball,
basketball, ice hockey, baseball, softball and lacrosse. Additionally,
some schools choose not to utilize our live stats service, while others
only provide live stats for home games, and that can also be contingent
on the availability of a high-speed Internet connection.
Why are the live stats frozen or not synced up with the audio or video?
Streaming traffic uses a different protocol and transfer mechanism than
live stats, so it’s virtually impossible to guarantee a perfect sync
between the two. Also keep in mind that the stats might not be entered
immediately on site, which can result in delays in the live stats. If
the on-site stats computer is experiencing technical difficulties, the
live stats will not update. We contact our schools when the stats have
not been updated for 5 or more minutes, but you’re also welcome to
contact us using the support link if you think there might be an issue.
How do I purchase an passport to access an event?
You can follow these steps to purchase a passport:
1) On the portal landing page, click on the appropriate watch or listen
icon next to the broadcast you’re interested in
2) Select the passport you’d like to purchase and click “NEXT”
3) Login with your username and password or register a new account by
clicking “REGISTER”
4) Enter your personal and billing information (this information MUST
match exactly the info on record with your credit card issuing bank) and
click “NEXT”
5) Enter your credit card information and click “NEXT”
6) Review the details of your order and click “NEXT”
7) If your order is successful, you will receive a confirmation e-mail
and you can access your event with25 minutes of the scheduled start time
by clicking on the corresponding watch or listen icon and clicking the
“Sign In” link if you’re not already signed in.
What is your refund policy?
If you are a paying subscriber and are unsatisfied with the quality of the product
or services we provided, we will refund single-event passport fees for live or
on-demand audio or video subscriptions in full if, a) there are confirmed, authenticated
issues originating solely with the Stretch Internet services, including network downtime
and/or latency, or, b) the broadcasting partner experiences technical difficulties which
result in transmission quality deemed as low or unacceptable by the Stretch Internet support
staff, and/or c) the broadcast is canceled or postponed before the completion of the event.
If you have purchased a season or all-access pass that includes the event in question, a
pro-rated refund will be issued upon request. You should always ensure your systems are
compatible with the minimum requirements outlined in the Stretch Internet FAQ section on the
portal. If you experience difficulties during a live event, you should contact us immediately
so as to allow our support staff a chance to remedy any issues in a timely fashion.
What do I do if I’m still experiencing issues?
You can open a support ticket by clicking on the “Submit Support
Request” link inside of the “Help” tab. Please complete all of the form
fields and provide as much information as possible before submitting the
ticket. You can expect to promptly hear back from a member of our
support team.
NCAA Women’s Lacrosse Final: BC-Syracuse – Game Time, TV, Streaming
It’s the Sunday of Memorial Day weekend, and for the fourth time in five years, that means Boston College women’s lacrosse is appearing in the NCAA championship game. Once again they’ll be trying to break their duck and bring home the program’s first national title – and to do it they will have to overcome an in-conference powerhouse.
Boston College (17-3) vs. Syracuse (17-3): THE NCAA NATIONAL CHAMPIONSHIP GAME
- The Eagles and the Orange face off for the title today at 12 PM ET.
- The takes place at a sold-out Johnny Unitas Stadium on the campus of Towson University, in Towson, Maryland.
- You can watch the game live on ESPNU, or on the WatchESPN website/app – the direct link to the stream of the game is here. A cable or streaming service login with a package that gets the ESPN family of networks is required to view the stream; free trials of either FuboTV or Youtube TV are among your options if you need to sign up today.
- You can listen to the game broadcast for free online on Syracuse student radio, WJPZ; link here
- Syracuse has owned the all-time series against BC, leading 17-7, but the matchup has been much closer and more intense in recent years since BC emerged as a national powerhouse. BC and Syracuse played three times earlier this season, with Syracuse taking 2 games to 1 for BC.
Team Stats:
- Statistically, BC has a slight edge on offense, scoring 16.80 goals per game (5th in the nation) to 15.40 goals per game for the Orange (14th).
- Draw controls are also a potential advantage for BC – they win theirs at a 60. 5% clip, also 5th in the nation. Syracuse is 33rd in the country with a 54% win percentage on draw controls.
- Syracuse has the statistical edge defensively, with a 12th-ranked defense that has allowed 9.65 goals per game. BC is 40th nationally with an 11.40 goals against average, though they are coming off bottling up an outstanding UNC team.
Watch Repair La Crosse Technology
Masters of the “Sentinel Ambulance” are real professionals.
We specialize in the repair of most watch brands including Swiss ones.
We carry out a wide range of work on the repair and maintenance of watches – from elementary replacement of batteries to restoration of the most complex watch mechanisms.
Our craftsmen are highly qualified and have many years of experience working with watches from prestigious brands, which guarantees excellent results even in difficult situations.
Expensive watches are a prestigious accessory that confirms the image of a successful person. They emphasize status and taste.
Maintenance of expensive watches requires special qualifications, attention, experience and skill from the master.
Trust our craftsmen and after repair the watch will regain the same accuracy!
Our masters do an excellent job of repairing watches “La Crosse Technology”
We will make and install watch glasses. We will diagnose your watch free of charge and advise you.
We will professionally replace batteries in La Crosse Technology watches
We use only Swiss batteries from Renata. With a guarantee of 18 months.
Watch repair cost
La Crosse Technology
Attention
This price list is for informational purposes only and under no circumstances is a public offer.
For certain types of work not provided for in the price list, the price is negotiated individually, at the time of acceptance or after diagnostics.
Prices for services are subject to change by the administration without prior notice.
The exact cost of services can be found in the Hourly Ambulance Workshop.
Warranty:
Service and repair of La Crosse Technology watches.
Installation of standard watch glasses, as well as production and installation of glasses (including complex shapes) for your watches on order.
Redecorating La Crosse Technology – polishing the case and bracelet, rhodium plating, chrome plating, gilding, electroplating.
Watch cleaning. Battery replacement (we only use Swiss Renata batteries).
Behind all this – welcome to our workshop. In addition, you can buy a strap or bracelet for La Crosse Technology watches from us, adjust and install it if necessary.
We check the accuracy of the movement free of charge, test the watch for leaks, install the straps purchased from us and simply advise on questions of interest.
Category stamps: No. 1:
Elite
Elle
Elysee
Essence
Laros
Lorus philip laurence
Pulsar
Q&Q
Romanson
Skagen
Sungliht
Swatch and Typical
Projection Watch La Crosse WT517-Black
Specifications WT517-Black
Hours:
- The clock is automatically radio controlled by a signal from Frankfurt (DCF-77). The signal is based on an atomic clock and is administered by the Federal Institute of Physics and Technology in Braunschweig, Germany. The error is less than one second in one million years. The exact time transmitted by the DCF77 transmitter is official in Germany. The transmitter is located in the Meinflingen area – 30 km from Frankfurt am Main and with its radius (about 2000 km) covers almost all of Europe and Ukraine.
- Ability to disable radio monitoring and select manual setting
- Time Zone (time corrected)
- Time display format: 12 or 24 hour
- Function “Dual Time” – setting the time for a different time zone.Possibility of simultaneous display of the main and second time on the clock display.
- Calendar: Displays the current date and day of the week. The ability to select one of five languages (English, French, German, Spanish, Italian) to display the day of the week.
- Two independent alarms with a short sleep function (sounds every 4 minutes).
- Electro-luminescent backlight
Time projection
- Possibility of permanent (from the power supply) and short-term projection of time onto a wall, ceiling or any other surface using a powerful economical and durable LED
- Projection color: red.
- Projection size: large, depends on the distance to the surface, the optimal projection distance is 1.7-2 meters; brightness: high (depends on the illumination; perfectly visible in the twilight and darkness).
- Projection option selection: Temperature / alarm / second time (dual time) – Current time – Calendar and day of the week
Indoor temperature:
- Measurement unit: ° C / ° F
- Measurement range: from 0 ° C to + 49.9 ° C ..
- Accuracy: 0.1 ° C.
- Updating information every 10 seconds.
Dimensions:
- Watch: 192x12x103 mm.
Power:
- 2 x “AAA” batteries, IEC LR03 1.5 V (included)
- AC adapter 230V (included)
Manufacturer: La Crosse (France)
Warranty: 1 year
Projection clock La Crosse WT552-Black
Features La Crosse WT552-Black
- Color LCD 75x65mm
- Size of digits on the display: time – 29mm, date – 8mm, internal temperature – 15mm, external temperature – 27mm
- Internal and external temperature measurement
- Temperature display in ° C or ° F
- Display of the trend of the internal and external temperature
- Projection time and external temperature
- Clock with radio time control
- 12 or 24 hour time format
- Alarm clock with snooze function
- Calendar: month / day / date
- Ability to turn on the constant display backlight and time projection when the clock is running from the power supply
- Ability to charge mobile devices from the USB port when operating from a power supply
- Low battery indicator
Specifications La Crosse WT552-Black
Hours:
- Clock automatically radio-controlled by a signal from Frankfurt (DCF-77). The signal is based on an atomic clock powered by the atom Cesium 133 and is administered by the Federal Physico-Technical Office in Braunschweig, Germany. The error is less than one second in one million years. The exact time transmitted by the DCF77 transmitter is official in Germany. The transmitter is located in the area of Mainflingen – 30 km from Frankfurt am Main and with its radius (about 2000 km) covers almost all of Europe and partly Ukraine. Please note that signal reception is unstable in the eastern regions of Ukraine.
- Ability to disable radio monitoring and select manual setting
- Time Zone (time corrected)
- Time display format: 12 or 24 hour
- Calendar: Displays the current date and day of the week. Ability to select one of seven languages (English, German, French, Italian, Spanish, Dutch, Danish) for displaying the day of the week.
- Alarm clock with snooze function
- Electro-luminescent backlight
Time and outside temperature projection
- Possibility of permanent (from the power supply) and short-term projection of time and external temperature onto a wall, ceiling or any other surface using a powerful economical and durable LED
- Possibility to select one of three projection modes: alternating (about 5 seconds) display of time and external temperature – display of time – display of external temperature
- Projection color: red.
- Projection size: large, depends on the distance to the surface, the optimal projection distance is 1.7-2 meters; brightness: high (depends on the illumination; perfectly visible in the twilight and darkness).
Indoor temperature:
- Units: ºC or ºF
- Measuring range: 0 ° C to + 50 ° C (32 ° F to 122 ° F)
- Measurement resolution: 0.1 ° C or 0.2 ° F
- Measuring accuracy: +/- 1 ° C (+/- 2 ° F)
- Updating readings every 30 sec
- Temperature trend display
Outside temperature:
- Units: ºC or ºF
- Measuring range: -40 ° C to + 60 ° C (-40 ° F to 140 ° F)
- Measurement resolution: 0.1 ° C or 0.2 ° F
- Measuring accuracy: +/- 1 ° C (+/- 2 ° F)
- Updating readings every 30 sec
- Temperature trend display
USB port for charging mobile devices:
- Charging mobile devices when the clock is running from the power supply
- Maximum permissible load current 0. 5A
Backlight:
- LED backlight.
- Possibility of switching on the permanent backlight of the display when operating from the power supply.
- Selects the brightness level of the backlight when operating from the power supply: high brightness – minimum brightness – turn off the backlight.
Data transfer from external sensor:
- Transmission frequency: 433 MHz
- Sensor: TX141-BV2
- Data transmission range: up to 90m line of sight
Dimensions:
- Projection clock: 133 x 50 x 110 mm.
- Thermal sensor: 40 x 20 x 130 mm.
Weight:
- Projection clock: 194g (without batteries).
- Thermal sensor: 44g (without batteries).
Power:
- Projection clock: AC / DC 5V 600mA adapter (included), 2 AAA LR3 1. 5 V batteries (sold separately)
- Thermal sensor: 2 x AA LR6 1.5 V batteries (sold separately.
- We recommend using alkaline (alkaline) batteries (Duracell, Energizer, etc.)
Operational features | Continuous projection (adapter included), Tilting projector, Outdoor temperature display, Indoor temperature display |
Dial type | Digital (electronic) |
24h | |
Manufacturer | La Crosse |
Warranty | 12 months |
Country of origin | France 9033 9000 |
Additional functions | Clock, One alarm clock, Calendar |
Display | Colored LED |
Display backlight | Constant, temporary |
From batteries | |
Body material | Plastic |
Available payment methods:
1.