Are you looking for top-quality axles for your high-performance vehicle. How can Insane Shafts improve your car’s performance. What makes Insane Shafts stand out in the automotive industry. Discover the benefits of race-proven axles for your car.
The Power of Insane Shafts: Revolutionizing Automotive Performance
Insane Shafts has established itself as a leader in the automotive industry, specializing in high-performance axles designed to withstand the rigors of intense racing and everyday driving. With a focus on quality, durability, and innovation, Insane Shafts offers a range of products that cater to the needs of automotive enthusiasts and professional racers alike.
Why Choose Insane Shafts?
- Race-proven technology
- Exceptional durability
- Enhanced performance
- Wide range of applications
- Expert engineering
Insane Shafts has built its reputation on delivering axles that can handle extreme conditions and high horsepower outputs. Their products are extensively tested on the racetrack, ensuring that they meet the demands of even the most powerful vehicles.
Discovering Insane Shafts: Where to Find and Purchase
For those interested in upgrading their vehicle with Insane Shafts products, the company offers a convenient dealer locator service. How can you find an Insane Shafts dealer near you? Simply visit their website and use the “Find A Insane Shafts Dealer Near You” feature. This tool allows customers to easily locate authorized dealers for product support and purchases.
Benefits of Purchasing Through Authorized Dealers
- Expert product knowledge
- Genuine parts guarantee
- Installation support
- Warranty coverage
- Access to latest product updates
By choosing an authorized dealer, customers can ensure they receive authentic Insane Shafts products and benefit from the expertise of trained professionals who can provide valuable advice and support.
Innovative Solutions: The K-Series Intermediate Shaft Bracket
One of Insane Shafts’ standout innovations addresses a common issue faced by K-series engine owners. What solution does Insane Shafts offer for K-series intermediate shaft bracket problems? The company has developed an ultimate solution for those experiencing breakages in their K-series intermediate shaft brackets.
This breakthrough technology demonstrates Insane Shafts’ commitment to solving real-world problems faced by automotive enthusiasts. By addressing this specific issue, they’ve created a product that enhances both reliability and performance for K-series engine owners.
Key Features of the K-Series Solution
- Increased durability
- Improved power transfer
- Reduced maintenance
- Compatibility with high-performance applications
- Easy installation
Pushing the Limits: 1000HP AWD Honda/Acura Rear Axles
For those seeking the ultimate in all-wheel-drive (AWD) performance, Insane Shafts offers a game-changing product. What makes their 1000HP AWD Honda/Acura rear axles stand out? These axles are designed to handle extreme power outputs, making them ideal for high-performance AWD setups in Honda and Acura vehicles.
The 1000HP rating demonstrates the exceptional strength and durability of these axles, catering to enthusiasts and racers who demand the best from their vehicles. This product line showcases Insane Shafts’ ability to engineer solutions for even the most demanding applications.
Advantages of Upgrading to 1000HP Rear Axles
- Increased power handling capacity
- Enhanced drivetrain stability
- Improved acceleration and traction
- Reduced risk of axle failure under high stress
- Potential for further performance modifications
Insane Shafts in Action: Sponsored Events and Racing
Insane Shafts actively supports and participates in various automotive events, further cementing its position in the racing community. How does Insane Shafts engage with its target audience through events? The company sponsors a range of exciting racing events, providing opportunities for enthusiasts to witness their products in action and connect with the brand.
These sponsored events serve multiple purposes, including product demonstrations, brand awareness, and community engagement. They offer a platform for Insane Shafts to showcase the real-world performance of their axles under intense racing conditions.
Types of Events Sponsored by Insane Shafts
- Drag racing competitions
- Time attack events
- Drifting championships
- Off-road races
- Car shows and exhibitions
Attendees of these events can often purchase tickets directly through the Insane Shafts website, making it convenient for fans to support both the brand and the racing community.
Adapting to Challenges: Insane Shafts’ Response to COVID-19
In light of the global COVID-19 pandemic, Insane Shafts has implemented measures to ensure the safety of its customers and employees while maintaining business operations. How has Insane Shafts adjusted its practices in response to the pandemic? The company has introduced an appointment-only system for will call and office visits, demonstrating their commitment to public health and safety.
This proactive approach allows Insane Shafts to continue serving its customers while minimizing the risk of virus transmission. It reflects the company’s adaptability and dedication to customer service, even in challenging times.
Safety Measures Implemented by Insane Shafts
- Appointment-only visits
- Enhanced cleaning and sanitization procedures
- Social distancing protocols
- Remote work options for employees where possible
- Increased focus on online customer support
The Technology Behind Insane Shafts: Engineering Excellence
At the core of Insane Shafts’ success is its commitment to engineering excellence. What sets Insane Shafts apart in terms of axle technology? The company employs advanced materials, innovative design techniques, and rigorous testing procedures to create axles that outperform traditional offerings.
Insane Shafts’ engineering team continuously pushes the boundaries of what’s possible in axle design, resulting in products that offer superior strength, reduced weight, and improved power transfer capabilities.
Key Technological Innovations
- Advanced alloy compositions
- Precision manufacturing processes
- Computer-aided design and simulation
- Stress-relieving heat treatments
- Proprietary surface hardening techniques
These technological advancements enable Insane Shafts to produce axles that can withstand the extreme forces encountered in high-performance and racing applications, while also providing reliability for daily-driven vehicles.
Customer Support and Product Warranty
Insane Shafts stands behind its products with comprehensive customer support and warranty coverage. How does Insane Shafts ensure customer satisfaction after purchase? The company offers expert technical support, detailed installation guides, and a robust warranty program to protect customers’ investments.
This commitment to after-sales service helps build trust with customers and reinforces Insane Shafts’ reputation for quality and reliability. Whether a customer needs assistance with product selection, installation advice, or warranty claims, the company’s support team is ready to help.
Elements of Insane Shafts’ Customer Support
- Technical hotline for product inquiries
- Comprehensive installation manuals
- Online troubleshooting resources
- Warranty claim processing
- Ongoing product support and updates
By providing extensive support options, Insane Shafts ensures that customers can maximize the performance and longevity of their axle upgrades, regardless of their technical expertise or experience level.
Future Developments: What’s Next for Insane Shafts?
As a forward-thinking company, Insane Shafts continually looks to the future of automotive technology. What innovations can we expect from Insane Shafts in the coming years? While specific details of future products are closely guarded, the company’s track record suggests a focus on expanding their product range to cover more vehicle applications and pushing the boundaries of axle performance even further.
Insane Shafts is likely to explore new materials, manufacturing techniques, and design concepts to create axles that can handle even greater power outputs and more extreme conditions. This ongoing innovation ensures that Insane Shafts will remain at the forefront of the high-performance axle market.
Potential Areas of Future Development
- Lightweight composite materials
- Integration with vehicle electronics and sensors
- Axles for electric and hybrid performance vehicles
- Advanced cooling and lubrication systems
- Customizable axle configurations for specific racing disciplines
As automotive technology evolves, Insane Shafts is well-positioned to adapt and innovate, ensuring that performance enthusiasts and racers will continue to have access to cutting-edge axle solutions for years to come.
Insane Shafts – Race Proven Axles
WordPress database error: [Table ‘b5763193209990.wp_wffsr3yk4q_cleantalk_sfw’ doesn’t exist]SELECT
network, mask, status, source
FROM wp_wffsr3yk4q_cleantalk_sfw
WHERE network IN (1409286144,1426063360,1434451968,1434976256,1435238400,1435239424,1435239680,1435239808,1435239872,1435239904,1435239920,1435239922)
AND network = 1435239922 & mask
AND 83832
ORDER BY status DESC
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/essential-grid/essential-grid.php on line 97
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/button/button.php on line 121
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_blog/carousel_blog.php on line 255
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_portfolio/carousel_portfolio.
php on line 155
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/divider/divider.php on line 68
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/featured/featured.php on line 203
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/gmaps/gmaps.php on line 133
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/heading/heading.php on line 251
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/icons_fontawesome/icons_fontawesome.php on line 230
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/item_portfolio/item_portfolio.
php on line 244
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/image/image.php on line 343
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/notification/notification.php on line 167
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/progress/progress.php on line 154
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/seperator/seperator.php on line 82
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/texteditor/texteditor.php on line 95
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/twitter/twitter.
php on line 66
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/video/video.php on line 161
Insane Shafts – Race Proven Axles
Find A Insane Shafts Dealer Near You
Contact your local dealer for product support or to order!
Read More
Insane Shafts Axle Tech
Breaking your k-series intermediate shaft bracket? We have the ultimate solution for you!
Read More
1000HP AWD Honda/Acura Rear Axles
Upgrade your AWD setup with a set of our 1000HP rear axles!
Read More
INSANE SHAFTS SPONSORED EVENTS
Click on an event for more information or to purchase tickets.
Due to the COVID-19 situation, will call & office visits are BY APPOINTMENT ONLY.
Dismiss
Axles – Insane Shafts
WordPress database error: [Table ‘b5763193209990.wp_wffsr3yk4q_cleantalk_sfw’ doesn’t exist]SELECT
network, mask, status, source
FROM wp_wffsr3yk4q_cleantalk_sfw
WHERE network IN (3154116608,3158310912,3158441984,3158450176,3158450432,3158450560,3158450576,3158450580)
AND network = 3158450580 & mask
AND 61447
ORDER BY status DESC
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/essential-grid/essential-grid.php on line 97
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/button/button.php on line 121
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_blog/carousel_blog.php on line 255
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_portfolio/carousel_portfolio.
php on line 155
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/divider/divider.php on line 68
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/featured/featured.php on line 203
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/gmaps/gmaps.php on line 133
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/heading/heading.php on line 251
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/icons_fontawesome/icons_fontawesome.php on line 230
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/item_portfolio/item_portfolio.
php on line 244
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/image/image.php on line 343
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/notification/notification.php on line 167
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/progress/progress.php on line 154
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/seperator/seperator.php on line 82
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/texteditor/texteditor.php on line 95
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/twitter/twitter.
php on line 66
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/video/video.php on line 161
Axles – Insane Shafts
Due to the COVID-19 situation, will call & office visits are BY APPOINTMENT ONLY. Dismiss
500HP CIVIC/INTEGRA/INSIGHT/FIT K-SERIES – Insane Shafts
WordPress database error: [Table ‘b5763193209990.wp_wffsr3yk4q_cleantalk_sfw’ doesn’t exist]SELECT
network, mask, status, source
FROM wp_wffsr3yk4q_cleantalk_sfw
WHERE network IN (1409286144,1426063360,1434451968,1434976256,1435238400,1435238912,1435238976,1435238992,1435238994,1435238995)
AND network = 1435238995 & mask
AND 40958
ORDER BY status DESC
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/essential-grid/essential-grid.
php on line 97
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/button/button.php on line 121
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_blog/carousel_blog.php on line 255
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_portfolio/carousel_portfolio.php on line 155
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/divider/divider.php on line 68
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/featured/featured.php on line 203
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/gmaps/gmaps.
php on line 133
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/heading/heading.php on line 251
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/icons_fontawesome/icons_fontawesome.php on line 230
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/item_portfolio/item_portfolio.php on line 244
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/image/image.php on line 343
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/notification/notification.php on line 167
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/progress/progress.
php on line 154
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/seperator/seperator.php on line 82
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/texteditor/texteditor.php on line 95
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/twitter/twitter.php on line 66
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/video/video.php on line 161
500HP CIVIC/INTEGRA/INSIGHT/FIT K-SERIES – Insane Shafts
Home / Honda / Fit / 500HP CIVIC/INTEGRA/INSIGHT/FIT K-SERIES
$380.00
92-2001 K-SERIES EG,EK,DA,DC,INSIGHT, FIT
500HP LH & RH
Description
INSANE SHAFTS AXLES ARE FAR MORE SUPERIOR THAN YOUR TYPICAL SWAP AXLES.
MADE FROM CHROMOLY STEEL THAT IS PUT THROUGH OUR PROPRIETARY ANNEALING AND HEAT TREATMENT PROCESS, THESE AXLES ARE CAPABLE IN HANDLING POWER DEMANDS OF UP TO 500 WHEEL HORSEPOWER AND ARE THE PERFECT ADDITION TO YOUR HIGH PERFORMANCE VEHICLE NEEDS. ALL INSANE SHAFTS AXLES INCLUDE REMOVABLE ABS RINGS (IF APPLICABLE) AND NEW SPINDLE NUTS. PLEASE CONTACT US FOR CUSTOM APPLICATIONS.
APPLICATION: 90-2001 INTEGRA (DA, DC), 92-2000 CIVIC (EG, EK), 99-2006 INSIGHT, 09-2014 FIT WITH K-SERIES SWAP
ENGINE: K-SERIES
TRANSMISSION: K-SERIES
INTERMEDIATE SHAFT: K-SERIES
Click here to purchase this set of axles in 1000HP
To purchase these axles individually, follow these links: IS-017 / IS-018
Additional information
| Weight | 30 lbs |
|---|---|
| Dimensions | 28 × 10 × 6 in |
| Side | LH+RH |
| Horsepower | 500HP |
Related products
Due to the COVID-19 situation, will call & office visits are BY APPOINTMENT ONLY.
Dismiss
Products – Insane Shafts
WordPress database error: [Table ‘b5763193209990.wp_wffsr3yk4q_cleantalk_sfw’ doesn’t exist]SELECT
network, mask, status, source
FROM wp_wffsr3yk4q_cleantalk_sfw
WHERE network IN (1409286144,1426063360,1434451968,1438646272,1440743424,1441792000,1442316288,1442381824,1442385920,1442387968,1442388992,1442389504,1442389760,1442389792,1442389794,1442389795)
AND network = 1442389795 & mask
AND 24547
ORDER BY status DESC
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/essential-grid/essential-grid.php on line 97
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/button/button.php on line 121
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_blog/carousel_blog.
php on line 255
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/carousel_portfolio/carousel_portfolio.php on line 155
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/divider/divider.php on line 68
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/featured/featured.php on line 203
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/gmaps/gmaps.php on line 133
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/heading/heading.php on line 251
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/icons_fontawesome/icons_fontawesome.
php on line 230
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/item_portfolio/item_portfolio.php on line 244
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/image/image.php on line 343
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/notification/notification.php on line 167
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/progress/progress.php on line 154
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/seperator/seperator.php on line 82
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/texteditor/texteditor.
php on line 95
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/twitter/twitter.php on line 66
Deprecated: Function create_function() is deprecated in /var/www/wp-content/plugins/thinkup-panels/widgets-builder/video/video.php on line 161
Products – Insane Shafts
Home / Shop
Showing 1–16 of 543 results
1988-2001 CIVIC/INTEGRA B-SERIES CABLE
$380.00 – $840.00
Select options
1988-2001 CIVIC/INTEGRA B-SERIES HYDRO
$380.00 – $840.00
Select options
500HP 09-2014 ACURA TSX, 09-2012 HONDA ACCORD 2.4L 4 CYLINDER
$480.00
Add to cart
1988-2001 CIVIC/INTEGRA B-SERIES HYDRO, 36MM LUG CONVERSION
$410.00 – $900.00
Select options
1988-2001 CIVIC/INTEGRA B-SERIES HYDRO SHOW AXLES
$475.
00Add to cart
1000HP CIVIC/CRX/DELSOL/INTEGRA J-SERIES SWAP, 27T INTERMEDIATE SHAFT (03-07 ACCORD V6)
$900.00
Add to cart
500HP CIVIC/CRX/DELSOL/INTEGRA J-SERIES SWAP, 27T INTERMEDIATE SHAFT (03-07 ACCORD V6)
$410.00
Add to cart
500HP CIVIC/CRX/DELSOL/INTEGRA J-SERIES SWAP, 27T INTERMEDIATE SHAFT (03-07 ACCORD V6), 36MM LUG CONVERSION
$410.00
Add to cart
1000HP 00-06 INSIGHT W/ K-SERIES, 09-14 FIT (GEN 2) W/ K24
$870.00
Add to cart
1000HP 02-07 SUBARU WRX WITH 04+ STI (180) DIFF
$1,060.00
Add to cart
1000HP 03-05 DODGE NEON SRT-4
$940.00
Add to cart
1000HP 04 SUBARU WRX STI (5X100 W/ FM), 99-04 OUTBACK, 02-04 IMPREZA 2.5 TS, 99-01 IMPREZA 2.5 RS
$1,060.00
Add to cart
1000HP 08-15 MITSUBISHI LANCER EVOLUTION 10 M.
T. FRONT AYC$940.00
Add to cart
1000HP 08-15 MITSUBISHI LANCER EVOLUTION 10 M.T. REAR AYC
$940.00
Add to cart
1000HP 87-95 TOYOTA LEVIN GTZ, COROLLA GTS FRONT
$1,350.00
Add to cart
1000HP 90-94 MITSUBISHI ECLIPSE M.T. AWD WITH TURBO FRONT
$940.00
Add to cart
00
T. FRONT AYC
Due to the COVID-19 situation, will call & office visits are BY APPOINTMENT ONLY. Dismiss
Insane Shafts axles MAZDA – MiataRoadster
Fitments
| MAZDA | |||||||||
| More Information | Year | Model | SubModel | Cylinders | Liter | Aspiration | Eng Desg. | Fuel | Notes |
|
Click For More Info | 1994 – 2005 | MIATA | 10TH ANNIVERSARY BASE LS M EDITION SE SHINSEN STO | ALL | ALL | N | ALL | ALL | EXCEPT MSM – RATED FOR 1000 RWHP |
|
Click For More Info | 2004 – 2005 | MIATA | MAZDASPEED | ALL | ALL | T | ALL | ALL | ONLY MSM – RATED FOR 1000 RWHP |
Product Description
Insane Shafts axles are available at two power levels, 500 and 1000 RWHP.
Includes ABS rings.
Price is per pair.
Car & Truck Transmission & Drivetrain Parts H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K Car & Truck Transmission CV & Parts
Car & Truck Transmission & Drivetrain Parts H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K Car & Truck Transmission CV & Parts
- Home
- Auto Parts and Vehicles
- Auto Parts & Accessories
- Car & Truck Parts
- Car & Truck Transmission & Drivetrain Parts
- H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K
org/Breadcrumb”>Car & Truck Transmission CV & PartsINSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K H J SERIES AXLES, (1) INSANE SHAFTS LOGO STICKER, CAN ALSO BE USED TO RETROFIT O,E,M, AXLES USING THESE UPGRADED CV BOOTS AND HIGH TEMPERATURE SYNTHETIC CV GREASE, (1) INNER CV BOOT,discount activity,Make Sure You Already Have it,Affordable and Shipped fast right to your door! SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K H J, H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K.
1, Drive Type: : FWD: Fitment Type: : Direct Replacement. AXLES USING THESE UPGRADED CV BOOTS AND HIGH TEMPERATURE SYNTHETIC CV GREASE, UPC: : Does not apply, 1, CAN ALSO BE USED TO RETROFIT O, INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B / H / K / J SERIES AXLES, Condition:: New: Brand: : Insane Shafts, INNER CV BOOT, INSANE SHAFTS LOGO STICKER, M, Placement on Vehicle: : LH + RH: Warranty: : No Warranty, E, Mounting Hardware Included: : No: Manufacturer Part Number: : IS-CV-BOOT-KIT-1.
Skip to content
H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K
H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K
Scientific and reasonable compartments has plenty of organized storage. Shaft measures approximately 16″ from arch, Lead Free Status / RoHS Status: Lead free / RoHS Compliant. Our designs are professionally printed with state-of-the-art equipment guaranteed to last for years. ② RC Drone Flash Light: Convenient for drones to fly at night, Lightweight & cozy for the coolest look. Not suitable for wearing: exercise. Bishilin Silver Plated Cubic Zirconia Halo Womens Wedding Band Infinity Set Of 2 Size 10: Bishilin: Clothing, No harm for body, Please pay attention to the size when purchasing, Including: A OW hoodie sweatshirt, or grandchild you can be sure to put a smile on their face, H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K, Fit is easy with standard sizing and classic style, 2018 New & Classic Movies & TV Shows – Movie characters we all love, CARE INSTRUCTIONS: Machine washable.
Roy Rose Jewelry Shey Couture Collection Sterling Silver with 14K Yellow Gold Antiqued Lemon Quartz Necklace 18” Length: Clothing. Sealing occurs when an O-Ring is trapped in the groove by a smooth flat flange that is clamped against the face with a nut or nut and sleeve, ** Treated against UV and water to last for years, Orders are shipped through Indian Registered post. Every month I give away $30 as customer appreciation to a, You will get a preview of all custom apparel before printing to get final approval, Light Blue Velvet Stretch Headwrap Special Occasion Headband. Find or Buy Designer Handmade Jewelry offers extensive line of quality jewelry at best competitive prices for PANDORA, H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K, theyre a lovely weight & less likely to dent or deform like hollow ones. ~ This necklace looks great by itself or add your own pendant, Circuit Board Cufflinks & Tuxedo Studs Circuit Board Jewelry, Older Teen or Adult Uni-Sex Poncho.
•The strap is adjustable so it can, Baseball Sandal – Women’s Whiet Baseball Sandal only $24. > Model in photo is wearing 18” length, Style: Thick but light dainty Belcher Rollo chain soldered links. So if you are wanting a more snug fit. Made from a worn pair Of my Girlfriend’s jeans pants. To change the metal to a solid gold (white/rose) or platinum is also available, H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K, Pink And Gold 100 Percent Pure Silk Dupioni Grommet Lined Curtain Decor and Housewares Window Treatment Drapes Panels Home Decor ______________________________________________________________ This curtain is made in a 100 Percent Pure Silk Dupioni. A receipt from the Smile Train (Just Giving) will be included in the package. Midress Fashion Retro Womens Ankle Booties Tassel Low-heele Lace-Up Non-Slip Shoes Short Boots Low Stacked Heel Round Toe Comfy Boots: Toys & Games. Improves muscle tone of the upper inner and outer thighs. Local Pickup: Local pick-up can be arranged.
Package Included: 1 x bra top + 1 x chiffon skirt + 1 x belt with silver coins + 1 x neck chain + 1 x arm chain, : Intrepid International Engraved Fillis Stirrups Irons. Please note: This is an Brand replacement part. Feature: -fold Smooth Telescopic Slide, WOODBRIDGE 37′ x22 Vanity Mount Rectangle Bowl. Recommended for removal of surface contaminants and smoothing of mild weld seams, H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K, Contains 2 bars each of 15 colors: white, Stormguard Ruined Tallsworth Hold: Toys & Games, EASY 4 STRING CONSTRUCTION – Young Toddlers Practice Tone. If you are not completely satisfied with our planter. 1000V Insulated: Tools & Home Improvement. * Very durable and no shrinking, Networking Interface:Serial RS-232, Ideal for drilling decorative holes used in fine woodworking and especially well-suited for severe angles and overlapping holes, 30 DAYS Money-back satisfaction guarantee. Go Time Gear Life Tent Emergency Survival Shelter – 2 Person Emergency Tent – Use As Survival Tent.
Also These Goes Great Underneath School Clothes on Those Freezing Cold Days. H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K, which aids in working afghan and Tunisian stitches, Great as wedding and party favors; give them as bridesmaids’ gifts and use them as alternative goodie bags for baby showers and especially halloween party favor bags, is an important strengthening tool to be used by adults and children.
Emirates Family Medicine Society
The Emirates Family Medicine Society is a non-profit medical society established in 2003 under the umbrella of Emirates Medical Association. They are representing a cross section of Family Doctors and General Practitioners who are actively involved in the management of primary health care.
Acknowledged as the leading provider of meetings planning solutions, marketing and management expertise, we are primarily dedicated to staging medical, scientific and professional business events.
We enjoy a long-standing reputation as the PCO of choice for many national, regional and world associations, institutional bodies, government and corporate organisations.
H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K
Front Side Marker Light Assembly LH LF Driver Side for Mazda B2300 B4000 B2500. 2 pcs Front Hood Gas Lift Supports Struts Shocks For 02-07 Jeep Liberty. 6mm Red Motorcycle Street Racing Road Anodized CNC Swingarm Slider Spools Stand, STATOR & GASKET Fits YAMAHA BIG BEAR 400 YFM400 YFM-400 2WD 2000-2004. Kuryakyn Rear Premium Mini Floor Boards Yamaha Road Star 99-14 except warrior, Performance Ignition Coil to fit Lexmoto Venom SK125, 1988 Ford Ranger Bronco II Shop Service Repair Manual CD Engine Drivetrain OEM. NEW FOR 3 ROW 52MM Nissan Skyline R32 GTS GTR Aluminum Radiator. Cole Hersee 30409-30 Type 1 Circuit Breaker 30 Amp. For Mitsubishi Outlander 2013-2015 2PCS ABS Chrome Front Fog Lamp Frame Replace.
1968 69 70 71 72 SKYLARK GS TRANS SHIFTER CABLE BRACKET Th500 NEW, Kawasaki 2006-17 Ninja ZX14 ZX14R ZX-14 DMP Integrated LED Tail Light Smoke. HIFLO OIL FILTER FITS HONDA TRX400 FA FOURTRAX RANCHER AT 2004-2007, Fits 1987-1993 NISSAN PATHFINDER DASH COVER MAT DASHBOARD PAD TAUPE, Carbon Fiber Tape-on Side Mirror Covers for 06-12 Range Rover LR2 LR3 LR4 Sports.
Mail us
[contact-form-7 id=”4152″ title=”Contact form 1″]
Go to Top
H J SERIES AXLES INSANE SHAFTS REPLACEMENT CV BOOT KIT FOR HONDA/ACURA B K
wonca2021.com (1) INSANE SHAFTS LOGO STICKER, CAN ALSO BE USED TO RETROFIT O,E,M, AXLES USING THESE UPGRADED CV BOOTS AND HIGH TEMPERATURE SYNTHETIC CV GREASE, (1) INNER CV BOOT,discount activity,Make Sure You Already Have it,Affordable and Shipped fast right to your door!
Explore 30 Interesting Facts about the Ancient Egyptian Pyramids
The site of the most well-known Egyptian pyramids, known as the Giza Pyramid Complex, has been the subject of continuous investigation for more than a century.
The area is home to the Great Pyramid of Giza, the Pyramid of Khafre, the Pyramid of Menkaure, and the Great Sphinx of Giza. Over time, and through archeological research, the pyramids have divulged secrets once only known to their architects.
And these are just a handful of the pyramids in Egypt.
From hidden shafts to sapphire-toothed saws, these are the most fascinating facts about these engineering marvels.
1. The pyramids were once the tallest human-built structures
Source: Jorge Láscar/Flickr
The Great Pyramid of Giza, also known as the Pyramid of Khufu, was built, according to most estimates, between about 2,550 to 2,490 B.C. The structure was truly colossal and remained the tallest human-built structure for many centuries until the construction of the Lincoln Cathedral (with its original spire) in 1311 AD.
This is an incredible achievement, especially given the ancient Egyptian’s relatively rudimentary knowledge of construction and engineering.
Even today, building such a structure would be a massive engineering task.
2. There are actually more than 100 pyramids in Egypt
Source: Tim Kelley/Flickr
When you think about the pyramids of Egypt, how many come to mind? 5? 10? In fact, there are, by some estimates, more than 130, give or take.
Not only that, but many experts believe more will be found in the coming years. The reason why so many were constructed is hotly debated, but it is clear they had a very important role to play in Ancient Egyptian culture.
3. Pyramid stones weighed more than an elephant
Source: HoremWeb/Wikimedia Commons
Would you believe us if we told that you that some of the stone blocks used to build the pyramids weigh in excess of 70 tons? The average weight of each of the 2.3 million stone blocks in the Great Pyramid is around 2.5 tons. However, many weigh as much, if not more, than your average elephant.
We may never really know all of the details of how these rocks were moved, but some ancient Egyptian documents and wall paintings do offer clues.
For example, stones appear to have been maneuvered on sleds – likely over wetted sand. But, there is much more to learn, and this continues to be a highly interesting area of experimental archaeology.
4. The pyramids are not completely solid
Source: Jorge Láscar/Flickr
Another fascinating fact about the pyramids is that there exists an intricate web of passages, shafts, and chambers within, and underneath, the pyramids at Giza. The purpose of these structures is not fully understood, but many theories exist.
5. The pyramids were not built by slaves
Source: WELS MLP/Flickr
Contrary to popular belief, the builders of the pyramids were not slaves, either Israelite or other. Current research, especially the discovery of records from the time, indicate workers were well paid and well-fed. It also seems likely that the workforce, as well as food and other essentials, came from all across Egypt.
Not only that, but the work was considered highly prestigious, with many workers given the honour of being buried in tombs near the sacred pyramids.
6. The Great Pyramid was very well constructed
Source: zolakoma/Flickr
While the Ancient Egyptians built many pyramids, not all have survived intact to the current day. However, examples like the Great Pyramid and the other pyramids at Giza have. Why?
One reason is that the Egyptians got better at building pyramids over time. Some researchers think that the Egyptians hadn’t been able to cut the stones accurately enough to make the joints of earlier pyramids really tight. Over time, moisture got into the joints, and this expanded and contracted as the weather changed – pushing the stones apart, ultimately leading to erosion over time.
The Great Pyramid was also built using granite, which tends not to soak up water. Craftsman also learned how to make tight joints in the casing covering the pyramid, meaning the pyramid could shed water instead of absorbing it, ultimately preserving it.
7. The pyramids appear to be aligned with the stars
Source: sciencefreak/Pixabay
The Ancient Egyptians appear to have used two constellations to align their pyramids in a north-south direction – the Big Dipper and the Little Dipper.
This alignment is so precise that their north-south positions are within an accuracy of up to 0.05 degrees. However, it is important to note that the alignment of stars is constantly changing, albeit at a very slow rate.
8. Special mortar helped the pyramids survive
Source: Shawn Clover/Flickr
There is an old Arab proverb that translates, roughly, to “Man fears time, time fears the pyramids”.
Part of the reason for the pyramid’s survival appears to be their builder’s choice of mortar. Analysis has shown that a super-strong mortar may have been used to fix the stones in place. What’s more, a lot of it was used. According to some estimates, around 500,000 tons of mortar were used in the construction of the Great Pyramid alone.
9. There are secret doors inside the pyramids
Source: Fred Hsu/Wikimedia Commons
The Great Pyramid contains three main rooms: the Queen’s Chamber, the Grand Gallery and the King’s Chamber.
Egyptologists have recently discovered two tunnels, about 20 cm wide, that extend from the north and south walls of the Queen’s Chamber and stop dead at stone doors with copper handles. The doors were discovered recently using a robot. Some believe that they could lead to a secret chamber.
10. The pyramids used to shine like diamonds
Source: David Stanley/Flickr
What did the Great Pyramid look like originally? Pretty impressive, if some historians are to be believed.
At the time of its construction, the Great Pyramid at Giza was covered with a well-polished casing of limestone blocks. Some have suggested that when the sun struck the casing, it would have shone like diamonds and been visible from many miles away. Over the millennia, most of the blocks were pried off and used on other building projects.
11. Not all pyramids were pointed
Source: Rüdiger Stehn/Flickr
While the pyramids at Giza tend to get all the attention, there are many other, equally interesting, pyramids in Egypt, including the “stepped pyramids”.
In fact, one of the first pyramids constructed by the Egyptians can be found at Saqqara, and appears to have been constructed around 4,700 years ago. Built as the tomb of the Egyptian king Djoser, it has stepped sides and a flat top.
Before this, tombs were constructed as mastabas — lower, flat-roofed structures with sloping sides. In fact, Djoser’s pyramid is believed to have started off as a mastaba, and for unknown reasons underwent a series of expansions, to create the 197-foot-high (60 meters) step pyramid we see today.
12. The Giza Complex wasn’t just for tombs to the Pharaohs
Source: Oesermaatra0069/Wikimedia Commons
The funerary complex around the Great Pyramid at Giza includes two mortuary temples connected by a causeway, tombs for Khufu’s immediate family and members of his court, and three smaller pyramids for Khufu’s wives.
13. The Sphinx may have once been colorful
Source: Cyndy Sims Parr/Flickr
The huge statue of the Sphinx was built near the great pyramid, by some estimates, 4,500 years ago.
It famously has the body of a lion and the head of a human.
Its current likeness is believed to be that of Pharaoh Khafra, but this may not have always the case. According to some researchers, the Sphinx may have undergone quite a few facelifts throughout its lifetime. Residues of red pigments on the face of the Sphinx suggest the statue may have been painted.
Today, most Egyptologists hold the view that the Great Sphinx was built in approximately 2,500 BC for the pharaoh Khafre, the builder of the Second Pyramid at Giza. While its purpose is not fully understood, some theories suggest that it was meant to guard the pyramid.
14. The step pyramid architect was later worshipped as a God
Source: Paula Veiga/Flickr
Imhotep was one of the earliest master architects known in history. But he appears to have been talented in a number of areas. His skills supposedly stretched from medicine to astronomy and the mystical.
He was a minister of Djoser and the probable architect of Djoser’s step pyramid.
He was later worshipped as a God of Medicine.
15. The Great Pyramid of Giza is heavy, very heavy
Source: Karen/Flickr
The Great Pyramid of Khufu weighs, according to some estimates, a whopping 5,750,000 tons. To put that staggering number into perspective the Burj Khalifa weighs a paltry 500,000 tons.
The weight of The Great Pyramid is based on it being built using an estimated 2.3 million blocks of stone, each weighing, on average, 2.5 tons (2,268kgs) apiece.
16. Centering in on the Great Pyramid of Giza
Source: NASA’s Marshall Space Flight Center/Flickr
In 1877, Dr. Joseph Seiss thought he had found an interesting discovery. He “showed” that the Great Pyramid of Giza is located exactly at the intersection of the longest line of longitude and longest line of latitude.
But, of course, this is not true. The longest line of latitude is the equator, and all lines of longitude are, by definition, of equal length.
In fact, the pyramid lies at 30 degrees north and 31 degrees east.
17. The pyramids have survived attempted demolition
Source: zolakoma/Flickr
In the 12th century, Sultan Al-Aziz Uthman, son of Saladin and ruler of Egypt, planned to destroy the pyramids at Giza, starting with the pyramid of Menkaure. After eight months, and great expense, his workers had made very little progress and he was forced to give up.
However, this attempt at grand-vandalism did leave a huge gash on one side of Menkaure’s pyramid.
18. A pyramid took about two decades to build
Source: Umberto De Peppo Cocco/Flickr
Building a pyramid on the scale of the Great Pyramid of Giza is no small undertaking (understatement of the year). But how long did they take to build? 100 years? 500?
In fact, according to some estimates, it took just 23 years to build the Great Pyramid of Giza. To put that into perspective, Notre Dame took nearly 200 years to complete.
19. Pyramids are mostly devoid of hieroglyphics
Source: LBM0/Flickr
Whenever people think about ancient Egypt, hieroglyphics are one of the things that are assumed to be present in, or inside, the pyramids. However, this is not the case – at least not for a long time.
Most of the internal areas accessible to the general public of the pyramids are completely devoid of them. However, this all changed in 2011, when researchers finally found some in a secret chamber, thanks to a little help from a robot.
20. An estimated 10,000 – 50,000 people build the structures
Source: Tyler/Flickr
To build a structure as large as the Great Pyramid of Giza in as short as a few decades must have taken a lot of labor. While estimates vary, most modern Egyptologists believe the work was done by a core group of no more than 10,000 to 20,000 experienced workers and support staff. Though this may have expanded to as many as 50,000 for some projects and periods.
That is still a lot. Especially considering that the population of ancient Egypt was probably not much more than 1.5 million.
21. The dead were buried with riches
Jewellery of Amanishakheto from her pyramid at Meroe. Source: Einsamer Schütze/Wikimedia Commons
For the ancient Egyptians, the afterlife was a paradise where one could “live” forever – as long as you go there, of course. For this reason, they believed that the dead would need some of their most prized possessions on the other side.
They buried the dead with more than just the bare essentials needed in the afterlife, like food and drink. If they were wealthy enough, jewelry and other valuables were also included – just in case.
22. We once thought the pyramids had more than four sides
Source: NASA’s Marshall Space Flight Center/Flickr
In the 1940s, a pilot named P. Groves claimed that the Great Pyramid actually has eight, not four sides.
He noticed indentations on each side that are very subtle from the ground and only become readily visible from the air. In 1880, Egyptologist Flinders Petrie had also noted that the sides of the pyramid, are “very distinctly hollowed” and that “each side has a sort of groove especially down the middle of the face”.
In fact, a laser scanning survey in 2005 confirmed the existence of the grooves, but they have been attributed to damaged and removed stones. Under certain lighting conditions, the faces can in fact appear to be split. This has led to speculation that the pyramid was intentionally built with eight sides, but there is no evidence for this.
23. One airshaft may have functioned as a “starshaft”
Source: NASA/HST/Wikimedia Commons
In the Great Pyramid of Giza, a shaft exists that a few have argued is aligned to the former polar star “Alpha Draconis” (aka Thuban). That shaft was presumably a design feature of the pyramid during its construction, and its purpose is hotly debated.
The shafts likely wouldn’t have been useful for actually observing the stars, though. This is because they were only roughly oriented, and large stones blocked the shaft’s exit. However, the mystery of the shaft’s true purpose remains.
24. Construction tools may have included sapphire-toothed saws
Source: future15pic/Flickr
Pharoah Khafre’s sarcophagus is a very impressive piece of craftsmanship. Made from black granite, carving, and shaping must have required great skill and some very special tools. Some have speculated that the ancient Egyptians used saws with cutting points made from jewels such as beryl, topaz, chrysoberyl, corundum, or sapphire. However, most of the tools used were probably made of bronze.
25. The pyramids might have been aligned using gnomons
Source: future15pic/Flickr
The Great Pyramid of Giza is aligned along with the cardinal points – north, south, east, and west (although it is slightly misaligned counterclockwise).
Experts have struggled to explain how this was achieved, as the Egyptians did not have access to a compass.
It has been suggested that the Egyptians used the autumnal equinox – when the Sun is directly above Earth’s equator and daylight hours equal those of night – to achieve this. This may have been done using a tool known as a gnomon.
Similar to a sundial, the process involves placing a vertical rod in the ground to project a shadow and, by tracing out its path, an observer can use a piece of string to draw a line from east to west. The result is very close to the alignment of the pyramid.
26. The Great Pyramid of Giza’s design might be based on Pi
Source: Internet Archive Book Images/Flickr
Some researchers have proposed that the concept of Pi may have played a role in the design of the Great Pyramid of Khufu at Giza. First proposed by one John Taylor, he noted that if one divides the perimeter of the Pyramid by its height, the resultant value is equal to 2Pi.
However, this is thought by most to just be a complete coincidence.
27. We still don’t really know how they were built
Source: Lynne Hand/Flickr
Despite being the subject of innumerable studies for centuries, we are still not entirely sure how these amazing structures were actually built. While many claims are made of some “breakthrough” discovery about the process, ultimately these are all just theories.
This is especially the case given the immense size of the blocks that make up the pyramids. We still do not know exactly how they were shaped, moved, and lifted into place. Obviously, it was possible, but exactly how did they do it?
We may never really know.
28. Napolean Boneparte once claimed you could build a wall around France from the pyramids
Source: European Space Agency/Flickr
Believe it or not, but when Napoleon Boneparte visited the pyramids in the early-19th century, he calculated that they contained enough building material to construct a 1-foot (0.
3m) wide, 10-foot (3m) tall wall around the entire perimeter of France.
Quite how he came to this conclusion is anyone’s guess, but apparently, it was “confirmed” by one of his staff.
29. Each pyramid would cost around $1B to build today
Source: Sam valadi/Flickr
The number of workers needed aside, the cost of building materials, equipment, etc to make the Great Pyramid of Giza would cost a fair bit today. According to some estimates, it would likely cost a bit over $1B to build similar structures today. This is actually not bad, considering the Burj Khalifa, the world’s tallest building, was completed in 2009 at a cost of $1.5 billion.
According to estimates, the cost of the limestone needed for the construction of the Great Pyramid would likely have cost $776 million, wages, travel time, plant hire, etc costing an estimated $102 million on top of that.
30. The pyramids still hold secrets
Source: ScanPyramids
While we have learned a lot about these mysterious ancient buildings, they have not given up all their secrets just yet.
Employing the latest in modern science, researchers have recently discovered a large, as yet unexplored, chamber inside the Great Pyramid of Giza.
By utilizing particle physics, the chamber was shown to be around 100 feet (30 meters) and appears to have not been ravaged by tomb raiders. Just what lies in wait for archaeologists inside it is anyone’s guess.
And that “Egyptomaniacs” is your lot for today.
The pyramids of Giza truly deserve their honorific title as one of the ancient wonders of the world.
90,000 why the modernized special machine “Val” is unique – RT in Russian
The scouts of the Trans-Baikal Territory received a batch of modernized special machine guns ASM “Val”, according to the website of the Ministry of Defense of the Russian Federation. The weapon differs from other samples by the ability to conduct silent firing at a distance of up to 400 m. At the same time, the improved version has a new shape of the receiver and a store made of transparent plastic, which allows the fighter to track the exact number of cartridges.
According to experts, “Val” is an effective means of engaging the enemy during operations where the maximum secrecy of actions is required from the military.
The servicemen of the Trans-Baikal Territory received a batch of modernized special machine guns ASM “Val” of 9 mm caliber. This was reported by the press service of the Eastern Military District (VVO).
“The development of modern automatic weapons is carried out by scouts and servicemen of special forces in the course of training in tactical and fire training, as well as in the framework of regular practical training on anti-terrorist security,” the website of the Ministry of Defense of the Russian Federation says.
As specified in the military department, the ASM “Val” is designed for silent firing at an aiming range of up to 400 m. which allows the soldier to track the exact amount of ammunition.
Also on the topic
“One of the best in the world”: what makes the modernized pistol of the Russian special forces “Grach” unique
The commandos of the Eastern Military District received a batch of modernized Yarygin (PYa) “Grach” semi-automatic pistols.
About it…
Thanks to the modernization, it was possible to increase the capacity of the Val horn from 20 to 30 cartridges, improve ergonomics, and some indicators of service and operational characteristics.
“It is also worth noting the convenience of using the new machine gun when bipods and unified Picatinny rails appear for attaching various devices that increase shooting capabilities”, – is specified in the materials of the BBO.
Serial production of the modernized Val assault rifle began in 2019 at the Tula Arms Plant (TOZ).As the head of the rifle-test complex of the enterprise, Alexander Moiseenko, reported in an interview with TASS, the improved modification of this weapon has a twice as long barrel resource.
The Val was modernized by employees of TsNIITOCHMASH (Podolsk) in the 2010s with the direct participation of the creator of the basic version of the machine – domestic designer Pyotr Serdyukov.
According to TsNIITOCHMASH specialists, the appearance of an improved version of the “Val” allowed for many years to provide effective weapons to the special forces of the power departments of Russia.
Original design
“Val” was created on the basis of the VSS “Vintorez” sniper rifle, which was adopted by the special forces of the USSR Armed Forces, the KGB and units of the Interior Ministry troops. Both samples are unified in units and assemblies and visually differ in the shape of the butt and the length of the store.
The rifle was put into service in 1987, the machine gun in 1989. Initially, it was supplied to special units of the KGB, but later it was added to the arsenal of other power structures of the country.In the 1990s, on the basis of the “Val”, a 9-mm small-sized machine gun SR-3 “Whirlwind” was developed.
- Vintorez sniper rifle (above) and Val submachine gun in basic versions
- © JSC “TSNIITOCHMASH”
The main advantages of the brainchild of TsNIITOCHMASH are high range and the ability to hit manpower in the most modern personal protective equipment.
In particular, Val’s bullets can penetrate anti-fragmentation vests, 5 mm thick steel sheet, some types of military equipment and brick shelters.
The assault rifle is designed for firing several types of ammunition. The most powerful are the SP-6 special cartridge with an armor-piercing bullet and the SP-5 sniper cartridge. They pierce 3rd class body armor and lightly armored vehicles.
Val’s arsenal also includes a 7N12 cartridge with an armor-piercing bullet and a 7N9 cartridge with a sniper bullet of increased penetration.The initial flight speed of all ammunition does not exceed 295 m / s.
Also on the topic
“Breakthrough for the army”: how the equipment “Ratnik” strengthened the Russian Armed Forces
The Rostec corporation said that over the past eight years, almost 300 thousand sets have been delivered to the Russian Armed Forces …
As reported on the TOZ website, the original design of the barrel of this machine allows you to achieve “high parameters for accuracy and accuracy of fire”, and the subsonic speed of the bullet ensures silent defeat.
The Vala muffler can be used for the entire service life of the weapon. It simultaneously serves as a flame arrester, which allows the owner of the machine to remain disguised in the theater of operations (theater of operations).
“Val” is a light and compact weapon. The mass of the assault rifle with a magazine without cartridges and sights is 2.5 kg, the length with unfolded stock is 878 mm, with folded stock – 615 mm.
With the “Shaft” it is convenient to navigate through various types of terrain and in confined spaces.Despite the powerful cartridges included in the ammunition of this weapon, the soldier does not feel a strong recoil when firing, and the sound of a shot resembles a click.
From open information it follows that “Val” is in service with the intelligence units of the Russian army, the Russian Airborne Forces, special forces of the Russian Guard, the Ministry of Internal Affairs and the FSB.
- Russian scout with a Val submachine gun equipped with a sighting system
- © Ministry of Defense of the Russian Federation
As noted by the military, the use of “Val” along with “Vintorez” and other types of silent weapons allows you to covertly operate behind enemy lines, provide maximum concealment and not “interfere with voice communications in a confined space battle.
“
“Val” can be used for actions against illegal armed formations (IAF), sabotage groups, during operations in mountainous and wooded areas and in urban conditions. The use of an assault rifle increases the combat capabilities of reconnaissance units, according to the RF Ministry of Defense.
“Means of conducting a fleeting battle”
Experts interviewed by RT stated that the Val family of assault rifles has established itself as a reliable and effective means of destruction.This weapon received high marks from both the military personnel of the army units and the special forces of the law enforcement agencies.
“Val” showed itself well in special units, including the FSB and many other structures. It allows for silent shooting, for example, when conducting reconnaissance. Taking into account the range of 400 m, it is used not as a sniper rifle, but as a means of conducting a fleeting battle, which sometimes has a forced character, “Alexander Butyrin, a columnist for the Fire Frontier magazine, said in a conversation with RT.
Also on the topic
“Breakthrough for the army”: how the equipment “Ratnik” strengthened the Russian Armed Forces
The Rostec corporation said that over the past eight years, almost 300 thousand sets have been delivered to the Russian Armed Forces …
According to the expert, the supply of a modernized version of the “Val” will increase the capabilities of army intelligence officers and special forces of the power departments of the Russian Federation.In particular, the use of a transparent store should facilitate the conduct of hostilities.
“A soldier in the heat of battle does not always understand how many cartridges he has in his store, whether it is running out or not. Previously, this feature was a tracer (glowing) cartridge. Now, with the advent of the transparent element of the store, there is no need to count the ammunition, ”added Butyrin.
The editor-in-chief of the magazine Arsenal Otechestvo Viktor Murakhovsky adheres to a similar view of the advantages of the modernized “Val”.In an interview with RT, the expert explained that a transparent store allows a soldier to “free memory” from counting ammunition and more accurately control their consumption.
“Val” became widely known back in Soviet times thanks to its silent shooting, which is very important when a reconnaissance officer is behind enemy lines. Naturally, the time has come to modify the machine a little. Most likely, the modernization of the “Val” took place in accordance with the experience gained during its combat use by Russian military personnel, “Murakhovsky emphasized.
Automatic special silent automatic AS “VAL” AS VAL UP
Review of the AS VAL airsoft machine from LCT.
Hello everyone!
First, I would like to clarify the reason for choosing this drive. I got my first drive 5 years ago, it was an AKM in a tree from CYMA.
Then airsoft was not as relevant in our region as the last two years. Maybe that’s why he lasted all this time in good condition, albeit with a slight modification. But there was a need not just to shoot, but to shoot far and accurately, and as a result – to hit the target.Tuning… Having carefully weighed everything, I decided that tuning AKM from CYMA is, to put it mildly, expensive and not entirely reliable in the end. Therefore, there was a need for a really high-quality drive with a strong and reliable base. At the beginning, the choice fell on the AS VAL series, and then on the LCT. Of course, the decision was not easy, it cost many hours on forums on the Internet and on YouTube channels. But my friends, it was worth it;]
So, let’s begin.
Our handsome man came here in such a box, fortunately it was not damaged during transportation.
Opening, we see something like the following …
The kit included:
— The drive itself
— Mehan for 50 balls
— Instruction
Let me remind you that this is the “UP” version and in the instructions you can see the stuffing of the gear of this drive, with a brief description of each detail.
Well, that’s all with a complete set.
I advise you to take care of the battery and charging in advance for future buyers, since they will not be here.
Okay, back to the drive itself. Taking it in hand, the first sensation is a monolith! I remember when I first took the AKM from CYMA in my hands, the stock and a little forend immediately dangled noticeably. But here … To say well – to say nothing. Strong, massive, no backlash (except for the forend, but more on that later), nothing twitches, does not dangle. The fuse and the fire translator go tight, which is also pleasing.It lies very comfortably in the hands and is very pleasant to the touch. Plastic forend and pistol grip, the rest is steel, everything is magnetised, except for a few parts. In a word, it certainly doesn’t look like a toy. But this is only the first sensation.
Now the second and everything in order.
Folding stock.
Everything is great.
In the folded and unfolded position, it does not dangle. No complaints.
Move on.
Pistol grip.
Here I had to figure it out. The fact is that there is a small gap between the steel case and the plastic handle, which we do not need at all. It can be clearly seen in the next photo.
At the same time, the handle itself is firmly held and absolutely does not play. A little later, after working a little with the bolt under the grip and understanding the situation, I managed to move it closer to the body and eliminate this problem.
But, as it turned out, trouble does not come alone;] Now the gap has appeared in another place.
But this is all solvable.
Now let’s move on to the fuse and fire switch.
Well, I must admit that after operating the AK, it was a little unusual for me to see the fuse and fire switch not in one part, but in two different ones. It seemed to me a very interesting solution, because each function is used in a different way.
Some more often, some less often, and there is no point in pulling the fuse if you need to switch from automatic to single fire.But this is my personal opinion. In addition, apparently, this is done in the image and likeness of the present, and on it it is exactly like that. I repeat, it was done efficiently. Everything suits me here.
Receiver and bolt.
The receiver cover wobbles a little. I fixed this by knocking down the front groove that it fits into. It can be accessed after removing the plastic forend.
As for the shutter curtain, it follows its trajectory quite well, opening up the hop-up control for us.
It should be noted right away that in this position it will be extremely problematic to get to it, so it is better to remove the receiver cover and calmly adjust it as you like.
It will be easier to do this this way.
And it’s even easier this way.
The hop-up camera is made of plastic.
The store will climb tight and absolutely no backlash, which, of course, pleases.
Move on.Forend.
A subtle backlash is felt here, but only with some effort. At the same time, no gaps and no joints are noticeable. The photo below shows the button, which will be discussed a little later.
Let’s continue. Sighting bar.
Does not dangle, stands upright and performs its function well. But with it, as with the front sight, it will be necessary to work already at the stage of zeroing in the weapon.
The front sight quietly spins with fingers without a musket.Here it would need to be treated a little with a sealant.
And so, the muffler.
Weighty. It seems to be responsible for most of the weight of the entire drive :). And to remove it, this is where you need the same button from the bottom near the forearm.
Holding it with your finger, turn the muffler clockwise 90 degrees to this position.
And then, just pull it forward.
It shrinks tightly, so you need to be careful in the last stage so as not to pull out the wiring with these bolts.
There is enough space for both 7.4 and 11.1 volt petal-type batteries.
To remove the forend, you also need to hold down the button and pull it off. Under it we find the same groove in which the receiver cover rests. If it has an incomprehensible backlash – try to work here.
This concludes my cursory inspection. And I move on to another interesting stage – shooting.
Here the drive is also very pleased with me, showing good performance.To be honest, I shot a very solid pile of sheets before I could adjust the sights for myself.
This is what the final shot from 10 steps showed.
And with 15 steps.
Shooting was made with 28 balls with 11.1v battery.
In conclusion, let’s summarize. Yes, small shoals have been noticed, but they are all quickly and easily removed.
On the whole, the drive left only positive emotions. And thanks to the good stuffing of the weight, I think you can safely put 150 springs without losing reliability.
Thank you for watching and your time, I hope the information was useful.
I would like to express separate words of gratitude to the Airsoft-rus store, thank you guys for the excellent quality of service and customer care. Continue in the same spirit!
09 January 2016
AS Val – production at the Tula Arms Plant
The 9-mm special assault rifle AC (index 6P30) is an automatic weapon, the operation of which is based on the use of the energy of powder gases discharged from the barrel bore into the gas chamber, while the barrel bore is locked by turning the bolt around the longitudinal axis by 6 lugs.
The AS assault rifle is designed for a special 9-mm cartridge (SP6). It conducts silent and flameless firing at a range of up to 400 m. The assault rifle is designed to defeat enemy manpower, including those protected by anti-fragmentation vests, as well as unarmored technical means.
The design features of the AC machine include:
original design of the barrel, allowing to achieve high parameters in terms of accuracy and accuracy of fire;
subsonic bullet speed (the possibility of silent firing) and its high destructive effect;
a muffler, which is an integral part of the machine, the design of the muffler allows it to be used throughout the entire service life of the machine without replacement;
folding metal stock and quick-detachable muffler allow to reduce the dimensions when carrying;
seats for the installation of optical and night sights are provided;
the presence of fuses guarantees safe handling of the machine.
The main type of shooting from a machine gun is automatic shooting. The cartridges are fed from a detachable sector two-row magazine with a staggered arrangement of cartridges.
Stores are interchangeable.
Types of cartridges used for shooting from the AC machine:
SP6 – 9-mm cartridge with an armor-piercing bullet.
SP5 – 9 mm sniper cartridge;
7N12 – 9×39-mm cartridge with an armor-piercing bullet
7N9 – 9×39-mm cartridge with a sniper bullet of increased penetration
| Properties | Characteristics of plain bearings igus® | Characteristics of rolling bearings | Technical data of plain bearings igus® | Technical data of the following industries : | |
|---|---|---|---|---|---|
| Accuracy | + | +++ | 0.02 – 0.15 mm | 0.001 – 0.01 mm | Machinery, CNC machining, electronics manufacturing |
| Completely grease free | +++ | + | Medicine, packaging, food, cleanrooms, consumer goods | ||
| Maintenance free | +++ | + | For various industries and | ||
| Weight advantage | +++ | + | Aluminum approx. 2.7 g / cm³ Polymer approx. 1.5 g / cm³ | Steel approx. 7.8 g / cm³ | Processing, automation , laboratory, rest time |
| High dynamic sensitivity at low loads | +++ | + | Packaging, processing, automation | ||
| High dynamic sensitivity at high loads | + | + ++ | Packaging, processing, automation | ||
| Change in stroke length | +++ | ++ | Technology of photography and filming, textiles | ||
| Friction coefficient | + | +++ | 0.15 – 0.3 µ | 0.001 – 0.05 µ | Manual setting, rotation |
| Sensitivity to pollution | +++ | + | Equipment for packaging, processing of stone, textiles, paper, painting equipment | ||
| Noise suppression | +++ | ++ | 45 dB | 60 dB | Medicine, laboratory, furniture |
| Cost benefits | +++ | ++ | For various industries | ||
| Corrosion protection | ++ | + | Filling systems, chemicals, food | ||
| Magnetic phenomena | + | +++ | Plastic, aluminum | Steel | Medicine, testing equipment |
| Resistance to aggressive environments | +++ | + | 1. 4751 + iglidur® X | 1.4112 | Medicine, food, electroplating, filling systems |
| Module compatibility | +++ | + | Guide rail design, assembly line automation | ||
| +++ | ++ | Photo and film technology, inspection, medicine, 3D printer | |||
| Suitability for short stroke | +++ | + | Textile, processing | ||
| Just fill with cables and replace | +++ | + | Guide fence design, assembly line automation | ||
| Stability | + | + | Machinery, machining using CNC machine tool manufacturing, electronics manufacturing | ||
| Longitudinal travel more than 10 m | ++ | + | Camera, material handling, logistics | ||
| Heat resistance | +++ | + | to +250 ° C | Chemicals | |
| Smooth running | + | +++ | Manual setting | ||
| Maximum acceleration² | +++ | 50 m / s² | 15 m / s² | Automation, processing | |
| Maximum speed² | +++ | + | 30 m / s | 5 – 10 m / s | Automation, processing |
Spetsnaz received the Tula silent “Val” and “Vintorez”
04 November 2019 13:05
0
Specialists are united: this highly accurate modernized weapon has no analogues in the world.
The legendary VSS Vintorez rifle was put into service back in 1987 together with the SP-5 sniper and SP-6 assault / armor-piercing subsonic cartridges. A little later, the AS Val submachine gun was adopted, which was 70% unified with the VSS. When performing the tasks for which they were designed, VSS and AU performed well, but shortcomings were also identified. In addition, as time went on, new requirements were imposed on weapons. Therefore, the Versiya news agency reports, the designers have developed new versions of this weapon, which received the designations VSSM Vintorez and ASM Val.
First of all, the resource of the weapon was significantly increased: the barrel became twice as tenacious. The guaranteed resource is now about 10 thousand shots, which is very good for special weapons. Vintorez received a new buttstock with adjustable cheek and butt pad. Both options are equipped with reinforced receiver covers.
New optical day and night sights have been developed for “Val” and “Vintorez”.
VSSM is now equipped with a magazine for 20 rounds instead of 10, and AFM – for 30 rounds instead of 20.
Since 2014, the Tula Arms Plant began to prepare for the production of ASM and VSSM. During the Army-2019 forum, TOZ representatives announced the start of serial production. It is planned to produce 1.5-2 thousand units every year. Weapons began to enter the special forces of the Ministry of Defense and the Ministry of Internal Affairs.
With their subsonic and low-ricochet cartridges “Val” and “Vintorez” are intended for combat and sniper shooting up to 400 m in urban conditions, for organizing ambushes in thickets, for secret penetration and other special operations that do not require long-range shooting, because the working range of these weapons does not exceed 250 m.The Val does not replace the Kalashnikov assault rifle, and the Vintorez does not replace the SVD / SVU.
Tell everyone about it!
Automatic special silent AC “Val” (Russia)
Special silent assault rifle AS “Val”, stock extended
Special silent assault rifle AS “Val”, stock folded
Special silent automatic machine AS “Val”, incomplete disassembly
Author with AS “Val” at the firing line
youtube.com/embed/kLnRgvr_ZJU” frameborder=”0″ allowfullscreen=”allowfullscreen”/>
Caliber : 9 × 39 mm (SP-5, SP-6)
Length : 875/615 mm (stock extended / folded)
Barrel length : 200 mm (without silencer)
Sighting range : 400 m
Weight : 2.5 kg without magazine
Magazine capacity : 10 or 20 rounds
The Special Automatic Machine (AS) “Val” was created at the Central Research Institute of Precision Engineering (TSNIITOCHMASH) under the leadership of P.Serdyukov in the second half of the 1980s, and was intended to arm various special-purpose units of the Ministry of Defense and the Ministry of Internal Affairs of the USSR. The assault rifle was created on the basis of the VSS Vintorez special 9mm sniper rifle as part of a single 9mm silent special-purpose weapon system. The AU entered service with the Armed Forces and the Ministry of Internal Affairs of the USSR at the end of the 1980s, together with a specially developed 9mm SP-6 subsonic cartridge with an armor-piercing bullet, and is still used in the Armed Forces and structures of the Ministry of Internal Affairs and the FSB of Russia along with the VSS.
The machine gun allows effective fire at a distance of up to 400 meters at the enemy in modern personal protective equipment (body armor, helmets), with a low level of unmasking factors (sound and flame of a shot). Such characteristics were achieved by using both specially designed 9mm cartridges with a heavy subsonic bullet and a shot silencer integrated into the design of the weapon. Thanks to these solutions, the sound pressure level of a shot from the speaker is about 130 dB, at the sound level of a small-bore rifle shot.The armor-piercing bullet of the SP-6 cartridge allows you to hit targets protected by class 3 protection equipment in accordance with GOST at ranges up to 300-400 meters. It is also possible to use SP-5 sniper cartridges created for the VSS rifle, but they provide less armor-piercing.
The AU assault rifles are in many ways a unique weapon, since in other countries most of the “silent” systems are created by more or less deep modernization of existing models of army weapons, rather than being developed from scratch.
In combination with the SP-6 armor-piercing cartridges, the Val submachine guns provide high firepower and combat effectiveness against opponents in modern personal protective equipment, with a low level of basic unmasking features.
The AS Val submachine guns, as well as the VSS Vintorez sniper rifles, are mass-produced in Tula, at the Tula Arms Factory.
A special automatic machine is built on the basis of gas-operated automation with a long working stroke of the gas piston. The gas piston is located above the barrel and is rigidly connected to the bolt carrier. The piston is hollow inside, and a return spring enters it with its front end. The barrel is locked by a rotary bolt, which has 6 lugs, for the cutouts in the receiver.The receiver is milled from steel, which provides greater rigidity compared to a stamped box.
The firing mechanism is a striker, its mainspring is located below the return spring behind the bolt. The safety lever is made like a Kalashnikov assault rifle and, in the on position, closes the groove for the weapon loading handle.
A separate translator of fire modes is located inside the trigger guard, behind the trigger, and provides fire modes with single shots and bursts.
The short barrel of the AC has in its front part (after the gas outlet) a number of groups of holes made along the bottom of the grooves and designed to divert part of the powder gases from the barrel to the rear expansion chamber of the integral muffler. The muffler is two-chamber, in the front chamber there are steel separators crushing and slowing down the flow of powder gases leaving the barrel. The silencer can be easily separated from the weapon and disassembled for cleaning, but firing from a weapon with the silencer removed is not allowed.
Regular magazines have a capacity of 20 rounds and are made of black plastic; it is also allowed to use 10-charge magazines from the BCC rifle.
Sights include a front sight and a sector sight, marked from 25 to 420 meters, mounted on the muffler casing. In addition, on the left side of the receiver there is a bar for attaching brackets for optical or night sights.
The pistol grip and forend of the assault rifle are plastic, the stock is made of steel tubes, folding to the side.
90,000 Central Military District of Russia: silent Val submachine guns entered service with scouts
In service with intelligence / Photo: img-fotki.yandex.ru
Silent Val submachine guns entered service with the intelligence units of the Central Military District (CVO) stationed in Siberia, the district press service reported on Thursday.
“The machine uses 9-mm sniper cartridges SP-5 and SP-6, capable of penetrating 3rd class body armor and lightly armored vehicles”
“The intelligence units of the Central Military District (CVD) stationed in Siberia have received 9-mm silent special assault rifles (BAS) Val,” the statement says.
The assault rifle uses SP-5 and SP-6 9mm sniper cartridges, capable of penetrating Class 3 body armor and lightly armored vehicles. The magazine capacity is 20 rounds, weight – 2.5 kilograms.
In addition, the assault rifle is equipped with a sighting device that allows you to change the range to the target by 400 meters and a bar for mounting day and night optical sights, RIA Novosti reported.
Technical Information
Special assault rifle “Val” The assault rifle is designed for silent and flameless shooting.The work of automation is based on the use of the energy of powder gases. The assault rifle is designed to destroy manpower protected by anti-fragmentation body armor, as well as unarmored technical equipment.
Design features:
- The original barrel design allows achieving high parameters in terms of accuracy and accuracy of fire
- at a subsonic speed of a bullet, its high lethality is ensured
- automatic and single-shot capability
- Folding metal buttstock and quick release silencer allow for reduced carrying dimensions
- Seats are provided for installing optical and night sights
- The presence of fuses guarantees safe handling of the machine
The advantage of the machine is its equipping with a detachable two-row sector magazine with a staggered arrangement of cartridges, interchangeable with the VSS, SR-3 product magazines.
Type of cartridges used for shooting: SP5 or 7N9 – 9mm sniper cartridge; SP6 or 7N12 – 9-mm cartridge with an armor-piercing bullet.
Special machine “Val” / Photo: tulatoz.ru
Performance indicators
| Caliber, mm | 9 |
| Initial bullet velocity, m / s | to 295 |
| Magazine capacity, pcs.cartridges | 20 |
| Sighting range, m: | |
| with open and telescopic sights | to 400 |
| with night sight | to 300 |
| Assault rifle length, mm: | |
| with folded stock | 878 |
| with extended stock | 615 |
| Weight with magazine without cartridges and sights, kg 1041 |
MOSCOW, WEAPONS OF RUSSIA, Stanislav Zakryan
www.
