Garrett AT Max Review: Benefits & Limitations
Disclosure: This post contains affiliate links and I may earn a small commission if you purchase through these links.
The Garrett AT Max is the most advanced model within the All-Terrain series.
It’s fully waterproof, built to hit the toughest grounds, and it has maxed-out features that professional hunters will make a beeline for.
While beginners may find this instrument intimidating to use, serious coin, relic, and jewelry hunters will already have the skills and knowledge to use this metal detector to the max.
For the price and technology, this is premium VLF circuitry at its best.
At a Glance…
✔️ Best Feature: Maximum Depth Detection
❌ Worst Feature: Requires Learning Process
👌 Ideal For: All Terrains, Water, Submersion, Gold, Coins, Relics, Jewelry, Competitions, Experts
- Maximum depth detection
- Waterproof & submersible
- Wireless Technology
- Multiple Detection Modes
- Back-lit Display
Our Verdict: The AT Max allows you to go a little deeper, fine-tune your settings, and home in your advanced hunting skills. Its many high-tech features and submersible, waterproof design puts it at the top as an excellent metal detector for serial hunters.
Who is the Garrett AT Max Best Suited to?
The AT Max metal detector is a high-tech
tool that many will find difficult to set up.
If you own or have had experience with using the AT Pro, you may be at
an advantage in learning how to maximize the AT Max. The pushbutton controls are essentially the
same, but the advanced features will require a little more hands-on work to
customize settings and interpret signal data.
The multiple detection and
discrimination modes will be used best in the hands of experienced metal
detection users as this model forgoes Standard mode that many beginners find
easier to learn with.
How Does the Garrett AT Max Perform?
As a single-frequency VLF operating at 13.6 kHz, it has both benefits and disadvantages. The lower frequency has longer wavelengths that penetrates deeper ground easily and is excellent for finding high conductivity objects.
While it’s not a specific gold digger detector, it is sensitive enough to pick up gold nuggets, and with use of all its featured modes, you can adjust settings to detect those low conductivity objects like iron. This model has four minor frequency adjustments that you can make to minimize electrical interference and somewhat improve your detection success at further depth.
Features & Benefits
Maximum Depth Detection
The AT Max has the lowest kHz frequency
of the AT series operating at 13.6 kHz with four adjustable settings. This allows you to penetrate deeper into the
ground to seek out high conductivity targets to approximately 12-18”.
Of course, there are multiple factors to
consider such as the terrain, size and chemical properties of the target, and
what modes and settings you’re currently using.
The true All Metal Mode is the detection mode you want to use to
increase detection and sensitivity.
There are no discrimination thresholds in this mode, so all metals will
Waterproof & Submersible
This is a staple feature of the AT (All-Terrain) series. They’re designed to be the ultimate tool that gets you hunting in every type of terrain regardless of weather conditions. If you want to find sunken treasure at surface exploration, the AT Max can be submerged underwater to a maximum depth of 10 feet.
The control box is also waterproof and submersible but the included MS-3 Z-Lynk headphones are not. If the control box is to be submerged underwater, you must switch out to waterproof headphones that are sold separately.
The AT Max has Garrett’s built-in Z-Lynk wireless system that allows you to pair any type of wireless headphones to the metal detector. The included MS-3 headphones are provided to get you hunting right away. But, is it any better than Bluetooth? It’s six times faster than Bluetooth and up to 4x faster than competing wireless systems.
It has almost instant response due to its near zero delay, so you’ll be able to detect and pinpoint faster than ever with the advantages of using headphones.
Multiple Detection Modes
There are four Detection modes that includes All Metal, Custom, Coins, and Zero modes. It lacks a binary system that provides Standard mode. Discrimination modes include Custom, Coins, and Zero to reduce the targeting of trash items.
The discrimination modes allow you to make use of the Tone ID feature that provides more data about a metal target via tone pitch. However, it reduces sensitivity to small and deep targets that the All Metal mode would be able to detect. You also have Iron Discrimination and Iron Audio features.
Unlike the AT Pro, this model has a
backlight. Its benefits are obvious from
hunting in the dark and improving visibility during low-light and bright
conditions. However, the LCD screen
backlight is not adjustable. It’s an
on/off function with the press of a button.
Requires Learning Process
With its fancy detection and discrimination modes, auto and manual ground balancing feature, and sensitivity and frequency settings, it can be overwhelming to learn how to set it up and become accustomed to its operation.
If you’re new to the AT series, you may end up fiddling around with the control box longer than you can get out there to use it. You must read the manuals, check out online videos and tutorials to make the most of the learning process and to maximize your success rate.
Not Specifically Designed for Saltwater Use
Single frequency metal detectors struggle with saltwater conditions, and so it can be misleading to say you can use this at the beach without disclosing the disadvantages. While VLF detectors are not made for saltwater, the AT Max can be properly ground balanced in saltwater somewhere between the 0-20 range.
Whatever setting you’re currently on, you’ll have to manually reduce ground balance to negatively bias by several points. Don’t go too negative and allow somewhat of an acceptable amount of noise as it should still be adequate to positively hear a signal on a desired metal object. To further reduce noise signals, especially in black sand beaches, you will have to reduce sensitivity.
What Coils are Available for the AT Max?
The searchcoil included with the AT Max
is an 8.5” x 11” DD PROformance submersible coil. It’s a great size for all-round hunters
searching for multiple types of objects.
However, it’s compatible with all available AT searchcoils that includes
a 4. 5” Super Sniper coil, a 6.5” x 9” concentric coil, and even a large 9” x
12” concentric coil.
Is there a Volume Control on the Garrett Metal Detector?
The volume is adjustable on the control
box and on the headphones. Volume
adjustments only affect the loudness of target sounds but not the sensitivity
of the target signal. You can adjust the
volume on the control box for use without headphones. However, you may disturb others around you
when hunting in a public location. Use
the headphones and turn it up to max setting and then readjust the volume
settings on the control box to acquire a better comfort level.
When was the Garrett AT Max Released?
The AT Max is the newest addition to the
AT series and was released to the market in late 2017. Many potential buyers wonder if they’re
purchasing the most updated version of the model, and you can usually check with
the seller if they carry current year productions.
How to Reduce Noise & Chatter on the AT Max?
If there are complaints about the AT Max, it’s likely due to noise and erratic behavior. There are few things you can try from ensuring the connection to the control box is tight, the searchcoil is correctly installed, and the coil wire around the shaft is adequately tight and not loose. You can also replace the searchcoil with a new one, replace the batteries, and hit the factory reset button.
As far as settings on the detector go, ensure Iron Audio is off, change frequency, ground balance, and discrimination settings. You may even have to go as far as reducing sensitivity if erratic behavior is caused by excessive metallic trash, nearby metal detectors, electrical interference, and highly mineralized soils.
The AT Max comes with a 2-year warranty,
so be diligent in registering your detector with the brand for warranty claims
or replacements. There are also many
advanced tip videos online specifically for the AT Max.
If you’re willing to put the effort into
learning how the Garrett AT Max performs at its best, you’ll have great success
with it. Many buyers often say once
they’ve purchased it, they go over their old hunting grounds, and lo and
behold, they have new discoveries they missed that the Garret detector picked
up with ease.
However, if you want max submersion, you must buy waterproof headphones separately and you’ll have to be diligent in tweaking the settings to find small gold nuggets or maximizing its use for beach hunting. As is, the Garrett AT Max is worth it.
Garrett AT Max Metal Detector Review (2021)
The AT MAX is the latest detector in Garrett’s popular “All-Terrain” series. How does it perform in the field? And is it really an upgrade to the excellent AT Pro? Read our AT MAX review to find out.
The AT MAX is Garrett’s follow-up to the AT Pro. It’s not designed to replace the Pro, but adds several new features for detectorists who want more from their machine – and don’t mind spending extra.
Features of the AT MAX include Z-lynk wireless audio, a true all-metal mode, improved electronics for greater depth, Iron Audio, Digital Target ID and both automatic and manual ground balance. It’s also designed to be simple to use, without limiting people who want more control over its performance.
Garrett claims these features make the MAX their “most versatile and advanced all-terrain VLF metal detector.” How does the AT MAX compare with other detectors in its price bracket though? And is it really an upgrade to the AT Pro? Keep reading out review to find out.
Design, Appearance and Ease of Use
The AT MAX has a similar design to the AT Pro. It’s a VLF detector that’s waterproof (more on that in a moment), weighs just 3.03lbs, is powered by four AA batteries and has a built-in pinpointing mode.
As the “All-Terrain” name suggests, the MAX is a versatile metal detector that’s designed for serious hunting. It’s suitable for almost any environment and offers great depth for both land and shallow-water detecting.
It’s also a hardy machine. Metal detectors can take a beating during transit and hunting on rough terrain, but the MAX can withstand almost everything you can throw at it.
What can you hunt with the AT Max though?
Pretty much everything, including relics, jewelry and coins.
Like the AT Pro, the MAX comes with Garrett’s 8.5″x11″ PROformance DD searchcoil. It’s a solid coil that provides great depth and target separation – especially for a stock coil. There’s also the option of buying more specialised coils, including a 9″x12″ or a sniper coil.
It’s worth pointing out that this is not a gold detector though. While Garrett might claim you can hunt for gold with it, the 13.6kHz frequency means it’s never going to be a good option for real gold prospecting.
Waterproof to 10 Feet
The AT MAX is fully submersible down to 10 feet (~3 metres). This makes it a great option for hunting in streams, shorelines and anywhere else with shallow water – although you’ll need to buy separate wired headphones for underwater hunting.
It’s also weatherproof and suitable for hunting in dusty, dry environments.
Tip: For hunting deeper than 10 feet, check out my page on the best underwater detectors.
Features and Settings
13.6kHz Operating Frequency
The Garrett AT Max has a 13.6kHz operating frequency. This, combined with the high-quality components and circuitry, makes it brilliant for detecting a wide range of targets, including brass relics, coins and jewellery.
Frequency is an area that the AT MAX differs from the Pro. The Pro’s 15kHz operating frequency is slightly higher than the MAX, which (in theory) means that the MAX should have deeper penetration, but marginally less target separation.
The 13.6kHz frequency is still higher than the average VLF detector though. This means the MAX is great at both detecting and separating small targets.
For maximum sensitivity and depth, there’s a true all-metal mode. This is a near-essential feature for serious detecting that’s not included with the AT Pro, so is one of the main advantages of the MAX. Garrett also claims the MAX’s internal electronics have been enhanced to increase depth penetration.
It’s worth noting that the MAX is not a multi-frequency metal detector. The frequency can be subtly adjusted to remove interference from other detectors and power lines, but can’t be significantly changed.
This is normal for a VLF detector – but I wanted to clear up any confusion about the frequency being “adjustable.”
In terms of performance, the AT MAX really does provide excellent depth. If you’re upgrading, it’s worth re-hunting previous locations to see what your old detector might have missed.
Digital Target ID
The LCD panel shows a large numerical target ID. Like many Garrett detectors, this ranges from 0-99 to provide a visual representation of the target’s composition.
This is a standard feature on most mid-range detectors. The AT MAX is quick to show a target ID though and is highly accurate – as long as it has the correct ground balance for the environment.
Iron Discrimination and Notch Discrimination
With 44 iron discrimination segments, the AT MAX has a slightly higher resolution than the AT PRO (which has 40 segments). In practice, this doesn’t make a huge difference, but is a nice bonus.
In case you’ve never used iron discrimination before, adjusting this setting allows you to change which types of ferrous targets are ignored depending on what you’re hoping to find.
As an example, a higher iron discrimination settings means you’ll dig fewer junk targets such as nails. Higher values may cause you to miss real targets though, such as certain relics. Junk with higher conductivity, such as pull tabs or foil, may also slip through.
To help with this, the AT MAX includes notch discrimination. Above the IRON region, there are a number of notches that can either be knocked out or selected.
Aside from the CUSTOM mode, which is allows you to set your own search pattern, there’s also a COIN mode. This is effectively a pre-notched setting that removes iron, foil and pull-tabs, making it an easy choice for beginners.
Another useful feature is the “ELIMINATION” button. Hold it down when hovering over an item you think is trash to remove it from the search pattern.
Pulse Width Modulation Audio and Iron Audio
Detecting using audio is often quicker than digital target IDs. The MAX includes Garrett’s proportional pulse width modulation audio, that provides more target information for you to use when deciding whether to dig.
There’s also the option of switching on Iron Audio to distinguish between a true target and flat iron object.
The MAX filters iron targets by default, so you don’t hear them when the discrimination is turned up. This is usually a good thing – especially if there’s a lot of trash around.
When you switch on Iron Audio, however, iron targets trigger a distinct tone. The additional grunting noise helps distinguish whether an item is an interesting target, or whether it’s a tricky iron target that only appears to be something worth digging.
It’s also great that Garrett has built Iron Audio into the All-Metal mode too. This allows you to identify discriminated iron objects even when hunting in All-Metal.
Z-Lynk Wireless Technology
A new feature is the option to use Z-Lynk integrated wireless technology with wireless headphones. This suffers from less interference and faster data transfer than Bluetooth, so you get the benefits of cordless audio without the downsides.
I’m a big fan of Z-Lynk. There really is almost no delay in audio output, so you hear the signal when the coil is directly over the target. This hasn’t always been the case with wireless metal detectors.
It’s also great to get rid of audio cords. Being chained to the detector is a common annoyance when detecting – especially when digging plugs – that can now be a thing of the past.
To complement this feature, Garrett has included their wireless MS-3 headphones with the MAX.
Manual and Automatic Ground Balance
One of the advantages of a professional-standard detector, like the AT MAX, is that you get both manual and automatic ground balance.
Adjusting ground balance is essential when hunting areas of high mineralization, soil conductivity or saltwater. By “balancing” to remove these interfering factors, you can maximise depth and cut down on chatter.
Keep in mind that while the MAX can hunt saltwater locations, all VLF detectors struggle in these conditions, so your depth will be limited.
Automatically ground balancing the MAX is easy. You just need to hold the “SHIFT” button to get the machine to automatically balance depending on the current environment.
For more difficult hunting environments, the manual ground balance option is useful. The automatic function usually does a great job though.
Additionally, the MAX has 175 ground balance resolution points. This allows for fine tuning depending on soil conductivity and mineralisation.
- PRO Mode Audio available on all four search modes.
- Eight sensitivity levels.
- Adjustable length (43″ – 56″).
- Electronic pinpointing mode.
- Threshold adjustment.
Tip: Want to learn more about the best metal detectors on the market? Take a look at my list here.
Control Panel and Display
Garrett control panels tend to stick to a similar design. After all, if it works, why change it?
The result is that the AT MAX feels instantly comfortable to anyone who’s hunted with a Garrett metal detector in the past.
Most importantly, everything on the AT MAX is clear and easy to view. The target ID numbers are large, while the coin-depth and discrimination settings are always visible. All the buttons are also relatively large and clearly labelled – even when most of them have multiple functions.
The LCD screen also has a backlight. This is an essential feature in low-light conditions – but is not included with the AT Pro.
Price and Where to Find it For Sale
Considering the wide range of features included with the Garrett AT MAX, it’s priced at the higher end of the VLF market. It’s clearly aimed at serious metal detectorists who want more from their machine.
With that said, it still provides excellent value for money. It’s only a bit more expensive than the AT Pro, yet comes with several extra features. So, if you want a high-quality detector that’s suitable for almost any environment, the Garrett AT MAX is a great choice.
As it’s sold by Garrett, one of the most popular metal detector manufacturers in the world, you can find it at most major retailers. These include Walmart and Amazon. If you’re buying second hand on eBay or Craigslist, make sure you check the condition and authenticity before you buy.
Performance in the Field (Including Depth)
Stats and features are great, but in-field performance is what really matters.
Fortunately, the Garrett AT MAX is a brilliant detector. It’s fun to use, intuitive and provides excellent performance in a range of environments.
What makes it so effective though?
The wide range of discrimination options, including Iron Audio, notch discrimination, iron discrimination and a true all-metal model, makes it adept at filtering bad targets. Like all Garrett machines, it’s also simple to use – despite the many settings and options.
It also has a fast response speed. This is essential for separating multiple targets, and is one of the biggest differences between a premium VLF detector and a budget option.
Like the AT PRO, the MAX provides outstanding detection stability. You can run it on surprisingly high sensitivities in many environments, and it retains decent depth even when you need to dial it back. It’s also almost always accurate when it comes to target composition.
I want to re-iterate that this isn’t a gold detector though. Sure, you might find the occasional gold necklace (if you’re lucky). But for small nuggets, the MAX’s frequency simply isn’t high enough.
This isn’t a criticism though. For jewellery, garlics and coins, it’s amongst the best metal detectors available.
Comparisons with Other Detectors
Garrett AT Max vs AT Gold
As the name suggests, the AT Gold is designed for hunting gold. For this reason, it has a higher 18kHz frequency and a smaller stock search coil.
In other ways, the two detectors have similar features. Both have 44 iron discrimination segments, a true all-metal mode, Pro Audio and eight sensitivity modes. They also both have Iron Audio and digital target ID.
Importantly, the AT Gold doesn’t have adjustable notch discrimination. It only allows you to choose from preset options. The Gold also doesn’t include Z-Lynk wireless audio, a backlight or volume adjustment.
So, if you want to hunt gold, the AT Gold is the better choice. The MAX is the superior detector in almost every other way though.
Garrett AT Max vs AT Pro
As the AT MAX is the most expensive model in the AT range, you would expect it to include some extra features. It has more iron discrimination segments, wireless audio and a true all-metal mode. It can also search to greater depth and has a threshold adjustment option.
There are a few advantages to the AT Pro though. Aside from the cheaper price, it has the option of using a “Standard” audio mode which is simpler for beginners. In contrast, the AT MAX only has the “PRO” audio mode. The AT Pro also has a slightly higher operating frequency, so it may be better for finding small targets (although the MAX does a great job too).
Ultimately, the Garrett AT MAX is the better machine, but the Pro is still an excellent option. Whether the MAX is worth the extra money depends on how much you need the added features, but you won’t be disappointed with either.
Garrett AT Max vs Minelab Equinox 800
One of the AT MAX’s closest competitors is the Minelab Equinox 800. It has similar features, including wireless headphones, submersible design and a fast recovery, but there are a few important differences.
The biggest is that the Equinox 800 is a true multi-frequency detector. You can choose between 5kHz, 10kHz, 15kHz, 20kHz and 40kHz operating frequencies – and there’s also a gold detecting mode.
This makes the Equinox 800 a highly versatile detector and probably the better option if you can afford it. It’s more expensive than the AT MAX though.
Frequently Asked Questions
Is the AT MAX Suitable for Beginners?
Some people recommend that beginners start with a cheaper machine and upgrade when they are ready. There are some advantages to this – cheaper metal detectors often have fewer features and are easier to learn. You also waste less money if you don’t enjoy the hobby.
With that said, there’s also merits to buying a more expensive machine like the AT MAX. The MAX can be used in almost any environment, can hunt to greater depths, and you don’t need to worry about upgrading. Yes, it takes more time to learn how to use, but it also provides better results.
Can I Hunt for Gold Nuggets?
The AT MAX can certainly pick-up larger gold nuggets. The problem is that gold prospecting usually involves finding tiny nuggets, and for this you’ll need a higher frequency detector.
Summary and Final Rating
If you want a high-end VLF detector for all-terrain hunting, the Garrett AT MAX is an excellent choice. It’s tough, durable and designed for serious detectorists, so it comes with a host of useful features not found on cheaper models.
Key features include the new wireless audio system, 44-segment iron discrimination, notch discrimination, auto and manual ground balance and a submersible design. I also love the iron audio feature and true all-metal mode.
It’s also great how Garrett has focused on improving some of the most common complaints about the AT Pro. The AT MAX comes with a built-in volume control, LCD backlight and threshold setting – all of which are missing from the Pro. It can also hunt at greater depths.
Are there any drawbacks or problems though?
Not many – although the single-frequency MAX can’t match the new multi-frequency Minelab Equinox 800 when it comes to target versatility. The Garrett AT MAX is also a relatively expensive VLF metal detector.
Even so, the AT MAX is an excellent detector that packs plenty of features into a relatively affordable price. If you want an all-terrain upgrade from a beginner detector, it’s a great option.
Garrett AT Max Review (Sept 2021) Is It Worth The Money?
Garrett AT MAX Metal Detector Review
The Garrett AT Max is Garrett’s all-purpose top-of-the-range machine.
Released in 2021 it’s the newest boy on the block and offers deeper detection than the Gold and the Pro.
My experience with detectors has found that Garrett always hit the mark, and review after online review includes photogrpahs of finds located with an AT Max on previously detected ground.
Now, I’m a fan of the Garrett AT Pro, but I admit the Max looked exciting. I wasn’t willing to part with my cash until I’d had a go with one but, lucky for me, someone else bought it and let me test out this expensive machine.
Overall, I found that the Max is excellent and it does detect deeper than the Pro due to its upgraded electronics and transmission power.
The price tag means this machine is aimed at serious detectorists intent on uncovering coins, jewelry, and relics at greater depth.
If you’re starting out, I wouldn’t recommend this machine as its features are high end and complicated for newbies.
And speaking of features – let’s take a look and see if the Garrett AT Max suits you.
Features and Benefits of the AT Max
The AT Max hums away on 13.6 kHz which is middle of the road and slightly lower than the Pro. It’s suited to all metals although coins, relics, and jewelry are the most likely targets.
This machine will pick up gold in the right conditions, but if you’re a gold hunter I’d recommend Garrett’s AT Gold which operates on a higher frequency and deals with the terrain free-range gold is usually found in.
The Max has adjustable frequency which you’d expect on a high-end machine. Adjustable frequency enables you to cut out interference and tune it to suit the targets you’re aiming for.
The all-important search modes can make a big difference to your hunting.
The Max offers four pro audio modes. You have a true all-metal mode for depth and sensitivity, one for coins, one for zero discrimination, and a custom mode.
You’d expect a custom mode on a machine of this price so I’m pleased to see it there.
If you’re a newbie the lack of pre-set modes can be daunting, again this is a machine for the experienced detectorist, it would be disheartening for anyone starting out.
For best metal detectors for beginners see here.
The target separation mode is excellent. It’s capable of picking up a piece of jewelry that’s sat right next to a coke can.
When you’re searching on ground that has a lot of targets, such as the bleachers and playgrounds, target separation can make the difference between a great find and few cents.
Good iron discrimination is another high end essential, and it’s on the AT Max in spades.
Choose up to 44 iron points to skip out on nails and Pepsi tabs without missing any potential relics. Pop on the target depth indicator to see how far you need to dig down.
All the AT Max bodywork is waterproof up to 10 feet.
I always say waterproofing is absolutely essential. Too many times I’ve seen a detectorist place their machine down into the wet grass, or get caught in a rain shower, and that’s their machine dead.
Some detectors have waterproof coils, which is a step better, but a waterproof control box is the best option. Accidents happen, if you slip in a creek then you’re up it without a paddle.
All the Garrett AT machines are waterproof to 10 feet – but don’t submerge the headphones, they are NOT waterproof!
Although Garrett says the AT Max can be used in saltwater, I wouldn’t recommend it.
It’ll do the machine no harm, but you’ll get lots of chatter and squealing which can ruin your day out. If you’re into saltwater hunting choose a machine suited to beach conditions such as the Tesoro sand shark.
The AT Max uses wireless technology and the machine is sold with Garrett MS-3 Z-Lynk wireless headphones. Unless you want an audience, headphones are important.
These wireless headphones are good. There’s barely any delay, it’s way faster than Bluetooth and the best bit?
Wires are tedious, always in the way and when you kneel to dig you’ve got to take the headphones off. I’ve stuck with them in the past because wires give good reliable signals, but the AT Max’s wireless capabilities are second to none. I’m a fan.
The AT Max also has iron audio. All metal iron audio is a thing of beauty. Search for all metals, but distinguish what is iron with a simple tone. Choose to ignore it if you want, it probably going to be a nail or bottle cap, but you never know.
All metal iron audio gives you the choice. Dig or not to dig.
The AT range has automatic and manual ground balancing. Its handy to have both as you can make the most of your time.
On changeable ground, popping it into automatic gives you the chance to roam around without too much fussing. Highly mineralized ground is conquered with auto ground balancing.
Still, if you like to do it your way the manual ground balancing can be adjusted in quarter points.
The Max also has a ground balance window which is one up on the Pro.
Where Is Best To Use The Garrett AT MAX
AT stands for All Terrain which gives you a good idea about its capabilities.
The AT Max will effectively search in all soils, sands, freshwater, and trashy areas, but it won’t perform well in salt water or on wet sand – no single frequency machine does.
If you’re covering the same ground, the Max is going to get deeper than the Pro or Gold, and it’s most sensitive.
What Will The Garrett AT Max Find?
It’ll find all types of metal at greater depth than most others in the Garrett range.
With its iron audio capabilities, I’d say this is a must-have for relic hunters, but the Max also uncovers jewelry, coins, and trash.
It will pick up gold but in typical gold area conditions it won’t perform as well as the AT Gold which has a higher frequency.
How The Garrett AT Max Compares to Other Garrett Detectors
The Garrett AT Max has all the features of the Pro with more.
The extras it has are a true all metal mode, iron audio in all metal mode, volume adjustment, threshold adjustment, a ground balancing window, wireless headphones and it’s backlit.
I have a real love of backlit displays and my Pro doesn’t have one. It’s a little touch that makes all the difference to a detectorist.
The Max is not a specific gold hunting machine, although it will pick up gold. Garrett makes the AT Gold for the reasons I’ve mentioned above.
To find gold in natural conditions, nuggets rather than jewelry, you need a higher frequency and mega iron audios.
The Max comes as standard with 8.5 x 11-inch DD PROformance coil (PROformance is a Garrett name trademark) which is what the Pro is equipped with.
It’s a good starting point, but you can purchase a range of coils for specific areas.
- 4-inch DD that helps you get into small spaces
- 5×8 inch DD for small spaces but with more target separation
- 5x 9 inch concentric for relatively trash free areas
- 9×12 inch concentric to cover more open ground in a shorter space of time
If you already have some of these AT Garrett coils, you’ll be pleased to hear they’re compatible with the AT Max.
Other Important Bits
It’s easy to get bogged down in specifics of coils and iron discrimination if you’re looking for the best metal detectors, but don’t forget these basic bits of information.
The AT Max is adjustable from 43 to 56 inches and it weighs a tiny 3. 03lbs which is the same as the Pro.
It takes 4 AA batteries which should cover you for 24 hours. Although I think the backlighting tends to drain the batteries a touch faster. There’s an indicator to say when you’re low on power.
All Garrett machines are backed with a two-year warranty. It’s a sign of great build and reliability.
What Are The Cons of Garrett AT Max?
I’m going to struggle here because the Max has outdone itself.
I always complained about the Pro’s lack of backlight, but’s that’s fixed so we’re just into its typical single frequency performance in saltwater.
Garrett says the Max can be used on the beach and in saltwater, which it can, but the performance won’t be great. You’ll have too much chatter and a headache at home time.
Newcomers to the AT range will struggle to learn the controls in one sitting, which could be off-putting, but if you already have the AT Pro or Gold you should pick it up quickly. The display is larger and brighter but the buttons do the same job.
Overall, the Garrett AT Max is a top-of-the-range buy for experienced detectorists looking to upgrade and get deeper.
It’s a new kid on the block, but the credentials are solid and it’ll last years with basic care.
The AT Max is an investment piece for sure, but worth it if you truly love metal detecting.
Is AT Max Metal Detector The Best Choice?
Garrett AT Max Features
Garrett AT Max was created in good traditions of the Garrett brand in general and AT lineage in particular. This metal detector is all-purpose and quite versatile, and all its tech specs, functions, and features are combined in a way that provides the user with all the necessary tools for the majority of situations\locations\targets. And yet, the variability of the functions makes the metal detector flexible enough to allow the user to grow and develop their skills, using this machine for years. If you look at all the tech specs of Garrett AT Max, you will see the following outstanding features:
- elliptic DD search coil – the very size, shape, and configuration of the default search coil that comes with Garrett AT Max arms the user with the most universal tool for metal detecting on any locations, including narrow places and riverbeds
- backlit LCD display – having the display backlit means that the user can treasure hunt in the dusk, or under the poor visibility conditions
- frequency shift enabled – frequency shift is an important feature to avoid electromagnetic interference from any other possible sources of electromagnetic fields around, and this feature is especially important for detectors with only one operating frequency
- VDI Target ID – visual numbers assigned to different metal targets make it easier for the user to interpret the signal and decide whether the target can be worth digging
- waterproof up to 10 feet – the metal detector is fully isolated from water and can operate underwater coping with the pressure on the depth of up to 10 feet, which is enough for the majority of average underwater search routines
- Ground Balance (Auto\Manual) – having Automatic Ground Balance is handy and quite efficient, because the user does not need to retune the Ground Balance all the time. On the other hand, having Manual Ground Balance enables the user to adjust the machine for unusual conditions
- adjustable Threshold – the user can manually tune the audio threshold to hear the target signals better against this constant humm. For some types of soils, this is a crucial feature
- high Recovery Speed – Recovery speed defines how many good targets the user will miss out because they will be masked by trashy or ferrous targets. The higher the Recovery Speed, the clearer signal the metal detector will give for every separate target, even if the items are located close to each other
- Pinpoint Mode – having a Pinpoint mode included helps the user to locate targets more accurately before starting to dig
- Z-Lynk technology for wireless headphones – Z-Lynk is six times faster than Bluetooth for wireless headsets
- Iron Audio – Iron Audio gives signals to normally silenced ferrous targets, in case you are not sure about the target.
VDI Target ID
VDI is Visual Discrimination Indicator. The feature stands for assigning digits to the segments of Discrimination, therefore giving numbers to different types of targets, based on the signals, while the signals are based on suggested\expected chemical composition. While there is always Audio ID included, some users find it complicated to interpret audio signals only. In this case, VDI Target ID is extremely handy, and serves as a source of additional data for better analysis.
In the majority of cases, ferrous and trashy targets are cancelled with the help of Discrimination feature. Discrimination silences trashy or non-valuable targets based on the electromagnetic response, and the user does not waste their time digging these targets.
However, the problem is that in some cases, ferrous and trashy items mask other, potentially valuable targets, by their electromagnetic response. If the items are located close to each other underground, if the ferrous item is more shallow, if the valuable target is smaller or located at an unusual angle, the ferrous item easily masks the response of the valuable target, and even high Recovery Speed may fail. Some ferrous items even cause ghost signals and create an impression that there is a valuable item down there.
Additional Iron Audio feature allows the user to hear the signal for iron targets, which are normally silenced, and evaluate the situation from a more informed position. Ferrous objects, whether they mask other items or pretend to be valuable, will give low-tone signals, and the user will never mistake it for a signal from a proper target.
Garrett AT Max Search Coils
What size coil comes with Garrett AT Max? The search coil which is included into the Garrett AT Max kit by default is the 8.5×11 inches Submersible DD PROformance™ elliptic coil. Its moderate size makes it handy for different locations, while its shape makes the coil easy to manipulate. DD configuration shows itself efficient for various targets, and provides steady performance on soils with different levels of mineralization. Moreover, this best coil for Garrett AT Max is water-resistant, enabling the treasure hunter to search on wet sand and dirt, in shallow water, and even on the depth of up to 10 feet.
One of the best news about Garrett AT Max is that there are several more compatible Garrett AT Max coils (by Garrett alone, while there are other smaller companies that also make compatible search coils). The search coils you can add to make the machine even more versatile include tiny 4.5 inches Super Sniper Searchcoil for narrow places and extremely trashy locations; medium 5×8 inches PROformance™ DD Submersible Searchcoil; 6.5×9 inches PROformance™ concentric Searchcoil; new 6×11 inches DD Viper Searchcoil; and big 9×12 inches PROformance™ Concentric Searchcoil.
Since Garrett AT Max is fit for most terrains, and works well with most types of targets, adding one or more of these coils to your equipment will only enhance and upgrade the metal detector, giving you more powerful performance wherever you search.
Garrett AT Max Settings
Garrett AT Max settings may seem a bit complicated, especially for beginner detectorists, but this machine was not actually created for complete newbies, so the learning curve is a bit more steep. Please make sure you check out all the controls and settings in the manual before you even purchase the metal detector. Below are a few short recommendations about the best settings for Garrett AT Max.
When you switch the device on, choose the Search mode before you tune everything else. The default mode which is activated automatically after switching the detector on is Coins. After you choose the Search mode which will define most of your settings automatically, you can adjust some of them for enhanced efficiency, for example, Sensitivity level, Threshold, Discrimination segments, or Volume.
If you face noise and electromagnetic interference, your metal detector probably reacts to the high-voltage transmission lines nearby, other metal detecting devices, or other potential sources of electromagnetic field. To avoid the interference, switch on the Frequency shift. Press the Freq button to check out frequency options, and choose from F1 to F4 shift channels.
To tune the level of Sensitivity, you can opt for one of the eight levels. If you expect small or very deep targets, you may want higher sensitivity. If you treasure hunt on trashy locations, highly mineralized soils, or there are other metal detectorists around you on the same location, you may want to decrease the sensitivity level to avoid noise. Decreasing the sensitivity level should be used only if Frequency shift, Discrimination, and Ground Balance do not help to solve the problem.
Garrett AT Max VDI Chart
VDI Target ID visually supports the audio signals given by the metal detector for different types of targets. By looking at the Target ID Legend, the user can analyze the signals better, and decide whether the item is worth digging. To give a more comprehensive picture of how the VDI works, we provide the following Garrett AT Max VDI chart (for coins).
- Jefferson Nickel – 51-53 Mid Tone
- Shield Nickel – 52 Mid Tone
- V Nickel – 52 Mid Tone
- Buffalo Nickel – 53-58 Mid Tone
- SIlver War Nickel – 53-60 Mid Tone
- Zinc Penny – 69-75 Split Mid Tone
- Wheat Penny – 75-76 Mid Tone
- Indian Head Penny – 75-78 Split Mid Tone High Tone
- Copper Penny – 82 High Tone
- Half Dime – 76 High Tone
- Silver Dime – 80-84 High Tone
- Clad Dime – 80-81 High Tone
- Silver Quarter – 86-90 High Tone
- Clad Quarter – 85-87 High Tone
- Silver Half Dollar – 90-91 High Tone
- Silver Peace Dollar – 96 High Tone
- Large Brass Token – 80 High Tone
Garrett AT Max Problems
One of the things we know about Garrett AT Max for ure is that the manufacturer does not issue online updates for the software. It means that all outdated codes and bugs, if any, cannot be fixed by simply connecting the metal detector to the PC, downloading and installing a newer version of the software, and upgrading the metal detector without leaving your home. Well, okay, what’s the deal, some detectorists say, there are still many metal detectors on the market that do not have this updatable software feature.
What we are mostly not told is that Garrett AT Max lineage shows a very unpleasant systematic breakage. If you check out the popular metal detecting forums, you will find out that sometimes, AT Max machines start giving crazy sounds and noise as soon as they are switched on, without the user even doing anything, and without any sources of electromagnetic field around.
For some users, this happens after months and months of using the metal detector on a regular basis, other buyers are unlucky enough to face this issue after one or two months. The typical feature is that troubleshooting recommendations do not work, checking the wires and stuff does not work, and even changing the search coil does not work. Users have to send the metal detector back and wait for a new one, if their machines are still eligible for the warranty replacement. Updatable software could have solved this issue, but we are unlikely to see any fixes for this.
And eventually, according to feedback from some Amazon buyers, AT Max burns through the batteries really fast, obviously because it only has four of them. So, get yourself some spare batteries when you are to go out in the field.
Tips & Tricks for Garrett AT Max Users
Considering the abundance of functions, features, and settings available with Garrett AT Max, some users may benefit from specific recommendations and tips on tuning the metal detector. While true mastery comes with time and effort, and even for full theoretical knowledge, the owner of Garrett AT Max should read the full manual more than once, we still recommend you to pay attention to the following tricks.
To use Iron Audio effectively, switch it off in highly littered locations or locations with high concentration of iron, either in the form of natural deposits (mineralization) or in the firm of items. Iron Audio will give too much noise in such places; better switch it on only to double-check specific targets and patches of land.
Garrett AT Max is not specifically created for saltwater usage, but it can be used in highly mineralized waters to search on riverbeds or seabeds, so you are not limited to wet dirt or sand. However, as any Very Low Frequency Continuous Wave metal detector, AT Max will encounter certain complications in such an environment.
The most important setting to pay attention to when searching in saltwater is Ground Balance. For saltwater beaches, normal indications come between zero and 22. If the signal bounces, you can try reducing the Sensitivity until you get a stable signal. Also, please keep in mind that in shallow waters or along the water edge, when the search coil is in and out of the water, the signal will be rather unstable regardless of your settings.
Garrett AT Max Accessories
In addition to the search coils discussed above, there are a bunch of other accessories available for Garrett AT Max. With these accessories, this versatile machine can become even more flexible and powerful.
Firstly, you can check out some search coil covers to protect your coils from accidental damage. There are open and closed covers.
Secondly, the basic kit actually includes the Garrett MS3 Z-Lynk wireless headphones, but you can check out additional transmitters and cases and stuff for the headphones. Or, you may want to get wired headphones for land use.
And eventually, if you have plans for underwater detecting that includes some diving, you will definitely need a submersible headset by Garrett. There is one Garrett submersible headset compatible with most underwater metal detectors by this manufacturer, but you can also research for compatible headphones by other companies.
Garrett AT Max Kit
The default package for Garrett AT Max metal detectors includes:
- metal detector
- search coil
- wireless headphones Garrett MS3 Z-Lynk
- user’s manual
- warranty card
If this list does not look that impressive, please keep in mind that most retailers and websites offer their own kits and bundles with additional accessories free of charge or with discounts. So, if you want more than this list, just double-check what accessories can be included into your kit.
Garrett AT Max Manual
We strongly recommend reading the metal detector manuals for each machine you consider buying, before actually buying. Even experienced treasure hunters may experience issues with some settings if they lack theoretical knowledge. If you ask yourself how to set up a Garrett AT Max metal detector, or how to change battery on AT Max Garrett, you can find detailed manuals here to make a fully informed choice about buying or not buying the metal detector.
Download Garrett AT Max User’s Manual
Garrett AT Max Review (Aug. 2021)
Are you looking for the best tool to detect metals, jewelry, rings, coins, or relics in any environment?
Your best bet is the Garrett AT MAX.
Here’s why: the acronym AT means All-Terrain performance, signifying its adaptability to any ground model, including water. Hence, it is waterproof; however, only up to 10 feet (3 Metres).
The Garrett AT MAX is the newest model of the Garrett AT metal detector series (others including the AT PRO and AT GOLD). The AT MAX’s predecessors are in themselves qualitative equipment, the improvements/updates in AT MAX makes it even better, as you will find in this review.
As you read on, you will find information covering the AT MAX’s unique features and its benefits to your treasure hunting, including added features that made AT MAX an updated metal detector in the AT series.
If you are looking for the most advanced and versatile VLF metal detector that works in all-terrain, a befitting, trustworthy device you can find on the market today is the Garrett AT MAX. Its advanced technology with increased detection depth and the ever-so-praised built-in Z-Lynk Wireless Technology (which I will discuss later in this review) makes it superior to many other metal detectors out there.
The detection time of the Garrett AT MAX is praiseworthy. There’s almost a zero delay from the detector to your headphones. This detector’s wireless technology is four times faster than other wireless headphones you can find and a whopping six times faster than the speed of Bluetooth. (Note that most of the metal detectors you’ll find on the market with a wireless detecting option use Bluetooth technology).
The Garrett AT MAX is lightweight, length-adjustable equipment that provides the most excellent possible detection depth and sensitivity. It has an LCD screen where you can monitor the workings of your detector and with which you can adjust its settings. The LCD screen has a backlight that illuminates the screen for better visibility in low light conditions. All the screen controls are on a large display, allowing easy access with a single finger.
The equipment also features an automatic, high-resolution ground balance. You can even tweak the settings with a manually adjustable option for improved performance, making the AT MAX appropriate in handling all types of terrain, including conductive soils and mineralized grounds. Skillful adjustment of these ground settings (such as the subtle ground response and the ground balance smooth detector audio) allows you to hear the fainest of targets.
Garrett AT Max Specification
Below are the essential facts (discussed in this review) you should know about this metal detector:
- Auto/Manual Ground Balance: High Resolution (175 pts)
- Z-Lynk™ Wireless
- Frequency: 13.6 kHz (adjustable)
- Sensitivity/Depth Adjustment: 8
- Audio Tone ID Level: 3
- Threshold Adjustment: Yes
- Iron Discrimination Segments: 44
- Waterproof: Yes (up to 10 feet/3 m)
- Batteries: 4 AA
- Warranty: 2 Years
The Garrett AT MAX comes in a kit that includes the following accessories:
- 8.5×11″ PROformance DD Search Coil
- 8.5×11″ Coil Cover
- 4 AA Batteries
- New AT MAX Baseball Cap
- Support Cuff with Strap
- New Garrett MS-3™ Z-Lynk Wireless Headphones
- User’s Manual
All-Metal mode is such that it does not discriminate between metals, so you are likely to detect every kind of metal, including undesirable types, like clips or bottle caps. The advantage, however, is it provides the most incredible sensitivity and detection depth. So, when you hunt with the mode, you won’t miss even the most subtle signals transmitted from the faintest buried target.
Custom mode is where you can save your preferred discrimination pattern. That is, if you’re hunting for anything other than coins, for instance, you can set up your detector with this pattern, and it would remember the setting, saving you the time of having to input the setting again in the future.
The Coins mode is self-explanatory. This mode detects all coins. With this, you’re more likely to miss trash or unwanted items, like foil or pull tabs, which I believe is an advantage. However, you’re likely to miss tiny jewelry in this mode.
The Zero mode is preferred when you don’t have specifics in what you are hunting for; perhaps you’re open to finding anything buried, this is the right option. At this point, you’re probably confused and cannot discern the difference between this mode and the All-Metal mode. With zero mode, the detector provides different ID tones for different metals; this way, you’re more likely to determine what is most likely buried under the soil.
3. Audio Tones
Let’s discuss the different tones you should expect to hear for different targets when using the AT MAX. When hunting with any of the discrimination modes (Coins, Custom, or Zero), the AT MAX has three tones that distinguish targets based on their conductivity.
For any item with a digital target ID rating of 0 to 34, the tone you’ll hear in your headphones would be low; an iron nail is an example in this category. The next high-pitched tone is only slightly louder for an item with a digital target ID rating of 35 to 75, like a gold ring. The loudest high-pitch tone you hear in your headphones signifies an item with a digital target ID rating higher than 75, for instance, a US quarter.
However, when you’re hunting with the All Metal mode, you will hear the middle tone no matter what is buried under the ground. Still, a more precised differentiation can be heard when you use the All Metal Iron Audio feature alongside.
4. Operating Frequency
Amongst the Garrett AT metal detector series, the AT MAX has the least operating frequency of 13.6 kHz. Even though this lower operating frequency means the AT MAX should have deeper penetration, the other ATs are better with target separation. Nevertheless, the 13.6 kHz operating frequency of the AT MAX is quite higher than the average metal detector in the market. Therefore, one could imply that the Garrett AT MAX is optimum for both detecting (at increased depth) and separating targets.
However, it is noteworthy that the AT MAX is not a multi-frequency metal detector. Although you can slightly adjust the frequency to quell interference from other detectors, you cannot change it on a significant scale.
5. Manual and Automatic Ground Balance
One of the features a professional –standard detector boasts of is the availability of both manual and automatic ground balance. This feature becomes vital when you hunt areas with different soil conductivity or mineralization or even saltwater. By adjusting this balance, you cut down on interference and chatter while maximizing depth.
While you may not be skilled in determining a particular ground’s balance, there is an automatic ground balancing feature that the AT MAX provides. You only need to hold the SHIFT button for the machine to detect and “balance” per the current environment. However, the device is yet limited, especially on rugged terrains; hence, the presence of the manual setting option.
Now, in saltwater terrains, the AT MAX does better than other metal detectors, but you may have to compromise with depth.
Thus highlighted are the additional features that are unique to the AT MAX in the Garrett AT metal detector series:
6. Iron Audio
To avoid the stress of digging and eventually digging up undesired flat iron items, the AT MAX features a discriminated iron sound (although the setting comes silenced in new equipment). In addition to this is the all-metal iron audio that causes shifts in small frequencies to quell interference.
7. Digital Target ID
Of course, the digital target ID is a standard feature on the average detector; so, what makes this unique in the AT MAX? Although, like other Garrett detectors, the digital Target ID is placed on a 0 to 99 scale, the AT MAX shows a target ID quicker and more accurately than others. However, note that this feature works better with the correct ground balance for the particular environment.
8. Adjustable Audio Threshold
Some treasures only emit faintly and can be easily missed. The user can use this feature to manually adjust the audio threshold (I’m referring to the hum you continuously hear in the background) so that you can hear faint targets.
9. Fast Speed
The new built-in Z-Lynk™ Wireless Technology is an integrated circuitry that transmits audio to wireless headphones, pairs automatically, and prevents interference from other wireless devices. Unique feature? This technology is six times faster than the speed of Bluetooth. So, you’re less likely to have moved over your target before hearing it; it’s an almost zero lag technology.
10. Pulse Width Modulation Audio
You get more detailed target information, and target signals are sharper and more responsive with the proportional Pulse Width Modulation audio response. It is often quicker to detect targets using audio than digital target IDs. With this feature, you get enough target information (audio-wise) to decide if digging is worth your time.
Garrett AT Max Pros and Cons
- Z-Lynk™ Wireless Technology
- Backlight for improved visibility
- Adjustable frequency
- All-terrain performance
- Adjustable length
- Electronic pinpointing
- Fast recovery speed
- Adjustable threshold
- All-Metal Iron Audio
- Larger display, including the digital target ID
- Free search coil
- 10 feet/3 m deep functionality
- 2 years warranty
- Only supports wired headphones underwater
- A bit expensive
- Not relatively light, as there are more lightweight designs available
- Not multi-frequency
Garrett AT Max FAQs
1. Is the Garrett AT MAX waterproof?
Yes, the Garrett AT MAX is fully waterproof. It is fully submersible and would function adequately underwater. With the Garrett AT MAX, you can tread where other treasure hunters fear to tread.
However, the wireless headphones are not waterproof.
2. Is the Garrett AT MAX good for saltwater?
The Garrett AT MAX is an all-terrain VLF metal detector. If so, specifically with water terrain, either freshwater or saltwater, you can trust the Garrett AT MAX to do an optimum job.
3. Can the Garrett AT MAX detect gold?
The Garrett AT series of metal detectors is suitable for different treasures, although each is more suited for some metals than the other. Nevertheless, the Garrett AT series, including the Garrett AT MAX, is an excellent detector for gold. Still, the Garrett AT GOLD is the best for gold detection due to its 18 kHz operating frequency. But if you are a mere hobbyist, the AT MAX is fair.
4. How deep can the Garrett AT MAX detect?
The Garrett AT MAX is fully submersible up to 10 feet (3 meters) deep.
If you are going to make the best use of your Garrett AT MAX, a learning process may be required. However, this shouldn’t be a hassle as the user’s guide, online videos, and tutorials can help out here, and if you put in the effort, you won’t regret making this choice of a fine piece of metal detector. You could go back to old hunting sites, and I could promise you that you’ll pick up new treasures.
More so, the metal detector is relatively cheap and won’t necessarily break your bank.
Garrett AT MAX. How to sell emptiness at a high price
A hundred years ago, a newspaper published an announcement: an exhibition of donkeys would be held at the square, everyone could come and see… When people came to the square, it turned out to be empty, and an emcee cried out loud, “Donkeys, welcome! We are starting our show!” It’s much the same situation in the metal detecting world. Garrett has revealed a new product 2017 – the Garrett AT MAX metal detector. And it’s better you should not say that it’s not the novelty you have been anticipating for over 7 years…
2002 Manufacturer X: We have finally made a revolutionary metal detector for you!
2003 Manufacturer X: Finally, new technology is expanding your horizons!
2004 Manufacturer X: Best engineers spent 3 sleepless nights and have finally created a small miracle!
2005 Manufacturer X: The detector can finally achieve even more depth!
2006 Manufacturer X: Now a new coil is finally capable of performing magic!
2007 Manufacturer X: Your wishes have finally reached us, and we have made this machine!
2008 Manufacturer X: It’s about time to surprise our competitor and deprive him of his sleep!
2009 Manufacturer X: God has finally sent revelation to our engineers, and we behold the light!
2010 Manufacturer X: Now you can simply add depth to your detector!
2011 Manufacturer X: Now you’ll be able to re-check the previously dug holes!
2012 Manufacturer X: The revolution in metal detecting world has finally arrived!
2013 Manufacturer X: This coil has finally appeared!
2014 Manufacturer X: Finally, we’ll provide you with depth that will enable you to drill through the ground!
2015 Manufacturer X: New technology has finally become available!
2016 Manufacturer X: 100,500 metal detectors are finally in one unit!
2017 Manufacturer X: The future has finally arrived!
Do new metal detectors yield more finds than old ones? Yes, indeed. You need only to be able to tell about it reaching out to hobby enthusiasts – and they will be waiting in line to get a newly made machine. And the fact that the latter repeats their old devices’ features in a rather awkward manner doesn’t matter at all.
Metal detector manufacturers have one problem: they can’t enchain treasure hunters to get them locked into their ecosystem, in order to constantly pump out money. A metal detector itself has the consumables missing that would make the user go back to the manufacturer at least once a month. But marketing does not stand still – surely they will come up with something…
A few years ago, I was impressed by the price of the Minelab GPX 5000, when it was being sold for $7,000. The detector costing seven thousand dollars! But now the Minelab GPX 5000 is priced at as little as $3,000. What has become of $4,000? Maybe the technology has changed over the past few years, and the GPX 5000 has become out of date? What needs to be done to regain the previous higher pricing level? Right, it’s necessary to release a new metal detector.
In 2010, the world saw the Garrett AT PRO costing $850. Now it’s 2017, and the Garrett AT PRO is priced at $500. At the same time the Garrett AT MAX has come into sight, and again, it costs $850. And for anyone who doubts that it’s a new machine, here’s a list of improvements:
Built-in Z-Lynk™ Wireless Technology • Cut the cord! Integrated circuitry transmits audio to your wireless headphones. Six times faster than Bluetooth speed! Auto pairing. No cables, and no interference from other wireless devices.
New Garrett MS-3™ Z-Lynk Wireless Headphones included • The speed of Z-Lynk Wireless Technology, and high-fidelity audio . . . with no cords attached!
Maximum Detection Depth • Increased transmit power and enhanced electronics provides AT Max with significant depth increase.
True All Metal Mode • Detects all types of metal and provides the greatest possible detection depth and sensitivity.
Backlight • Illuminates LCD screen for improved visibility in low-light situations.
Optimized Frequency • The AT Max’s 13.6 kHz operating frequency provides excellent detection on a wide range of targets—including silver coins, gold jewelry, and brass relics.
High Resolution Ground Balance • Automatic and manually adjustable for improved performance. Includes 175 points of Ground Balance resolution, allowing the AT Max to handle both conductive soils (such as saltwater beaches) and highly mineralized ground.
Automatic Ground Balance Window™ • Garrett Exclusive feature will simultaneously ground balance to a range of values to help overcome localized ground variations. By reducing subtle ground responses, the Automatic Ground Balance Window smooths detector audio and allows the user to hear faint targets.
Larger Display Numbers • Digital Target ID number, Iron Discrim number, etc.
More Controls • All easily accessible with a single finger as you search.
Adjustable Threshold • User can manually adjust the audio threshold (the constant background sound or “hum”) to better hear faint targets.
The Garrett AT MAX doesn’t have an STD mode, so nobody will be able to call it an updated version of the Garrett ACE (as often used to happen to the Garrett AT PRO).
With the frequency getting higher, any metal detector faces the challenge with the detection depth – it becomes shallower. This pattern also works in an inverted way. An old Garrett AT PRO operates at a 15kHz frequency, the new Garrett AT MAX has a lower one – 13.6 kHz. Both detectors come with identical coils, although the manufacturer has promised greater detection depth. You think it’s just a coincidence? By the way, the Garrett AT MAX shares coil compatibility with the Garrett AT PRO.
Here are the specs and features of the new Garrett AT MAX:
- Z-Lynk™ Wireless (integrated) – yes
- MS-3 Wireless Headphones – Included
- Enhanced Detection Depth – yes
- True All-Metal Mode – yes
- Backlight – yes
- Frequency – 13.6 kHz, adjustable
- Ground Balance, Auto/Manual – High Resolution, 175 pts
- Auto Ground Balance Window™ – yes
- Iron Audio™ (Disc. Modes) – yes
- All Metal Iron Audio™ – yes
- Iron Discrimination Segments – 44
- Threshold Adjustment – yes
- Electronic Pinpointing – yes
- Waterproof to 10 feet (3m) – yes
- Freshwater use – yes
- Saltwater use – yes
- Search Modes – 4 (all Pro Audio)
- Digital Target ID, larger size – yes
- Audio Tone ID Levels – 3
- Notch Discrimination – Adjustable
- Sensitivity/ Depth Adjustments – 8
- Fast Recovery Speed – yes
- Target Depth Indicator – yes
- Standard Searchcoil – 8.5” x 11” DD PROformance™
- Length (Adjustable) – 43″ to 56″ (1.09m – 1.4m)
- Total Weight – 3.03 lbs (1.4 kgs)
- Batteries – 4 AA
- Battery Condition Indicator – yes
- Warranty – 2 Year, Limited Parts/Labor
The difference between the Garrett AT MAX and Garrett AT MAX International versions is in the Middle Tone. The International version has a rather small mid-tone range, and it’s impossible to change the Middle Tone point.
Don’t you feel very frustrated by the fact that the new detector doesn’t have volume control, do you? Maybe the unit will include this feature some day, but then it will be quite another Garrett machine.
All info on the new Garrett AT MAX will be collected here. And believe me, people will buy this detector – as everyone likes to stay in-step with the times and to feel the whole power of modern technology after 15 minutes of searching. And then, once again, “Ladies and gentlemen, you are invited to come to the square to see the cleverest donkeys”…
Garrett AT Max Metal Detector Review & Performance for 2018
Garrett AT MAX Metal Detector Review
An honest and comprehensive Garrett AT Max Review.
Garrett is one of, if not the biggest metal detector brand available on the market. So does the Garrett AT Max live up to their reputation? Let’s see.
With the huge success of the AT Pro and the AT Gold (all-terrain pro and all-terrain gold) and the ever-advancing technology, it was time to release their next model. The Garrett AT Max Metal Detector (all-terrain max) to keep up to date with the new tech.
Taking all the best features from previous models and combining them into one serious powerful metal detector.
The Garrett AT Max even looks the business!?Built to last and finished with a nice sleek look.
AT Max Unboxing and Contents
Upon unboxing the AT Max you will see the Garrett Z link MS3 wireless headphones, a 8.5″ x 11″ DD Search coil, battery, the lower shaft, the upper shaft with the control box, the manual, hardware, warranty card and the search coil cover. Oh, and did I mention a funky hat and a collectable gold Garrett coin.
Garrett AT Max Assembly
Assembly is very simple. Place the coil cover onto the DD search coil to keep it well protected from scratches and damage. Attach the lower and upper shaft (with the control box) together, these will clip securely together with a pin lock. Next, at the bottom of the lower shaft we will connect using the wingnut and washer to the coil. Tighten. Then you will wind the coil lead around the shaft keeping as tight as possible without straining the leads and place the connector once at the top into the underneath of the control box.
Garrett AT Max Buttons and Control Box
There are 11 buttons on the Garrett AT Max control box as you can see in the picture.
Some of these options will require you to press the shift button first to enter the secondary menu of the respective button.
- Iron Disc/Notch Disc – Change the iron and notch discrimination settings.
- Frequency Adjust/Sensitivity – Change the frequency, adjust the sensitivity.
- Manual Ground Balance/Threshold – Increase or decrease the threshold or change the ground balance settings.
- Power/Mode – Turn on the AT Max or select the preferred detecting mode.
- Iron Audio – Switch on or off the Iron Audio mode.
- Pinpoint – Pinpoint the specific location of a target in the ground.
- Elim/Light – Eliminate certain ID patterns and switch on the backlight.
- Shift – to be used in conjunction with the above buttons to select the secondary option in orange.
The LCD screen displays the following – A coin depth indicator allowing you to see approximately how deep the AT Max thinks the target is in the ground. Battery Level. Target ID numbers. The mode you currently have selected. The wireless headphones active icon. The Iron discrimination level. The sensitivity. The notch discrimination and the type of metal indicator.
Garrett AT Max Features
Z-lynk Wireless technology
The Z-lynk wireless technology built into the AT Max has practically no delay in response time. Allowing the Garrett MS3 headphones to communicate flawlessly with the detector.
Cables of normal wired headphones have always been a problem for me their always in the way so this eliminates the issue.
In the past wireless headphones have had a little delay sometimes causing you to miss a signal or struggle to locate the target, these headphones have no delay so when you are above the target you will hear it instantly. In fact, its near-zero delay 17 milliseconds to reach from your detector to your headphones. Four times faster than other wireless headphones.
They are ultra clear allowing you to hear the difference in the discrimination tones. For me, these wireless headphones are a Godsend.
No more taking your headphones on and off, no annoying anyone with the loud tones, no more missing signals and a fantastic way of hearing more detailed tone information about the target.
Comfy to wear with the sponge ear padding, charged via USB, volume control and high fidelity audio.
Auto & Manual Ground balance
The AT Max includes both auto and manual ground balance. The auto ground balance will adjust itself as you swing away optimising the detector for the ground condition while the manual will allow the user to fine tune to your ground or water conditions.
Optimised frequency & adjustment
The Garrett detector operates at a base frequency of 13.6khz which is a good mid-range frequency both for low and high conductivity metals, however, the metal detector also will allow you to make slight frequency adjustments which will allow for the reduction in interference.
What this feature does is allow you to metal detect in all metal mode and hear the discriminated iron targets at the same time. The iron audio is very clear.
A Back-light on the LCD screen for those that like to hunt early in the mornings before dawn or late into the winter afternoons. I personally wouldn’t ever stop detecting if I had the choice!
Notch discrimination allowing you to fine-tune your hunt even further getting rid of them pesky pull tabs.
Digital target ID numbers on a very large and clear LCD screen. These give you a good idea of if it’s a good target or bad target. Once you get use to this feature it’s pretty hard to live without.
Garrett AT Max Modes
The custom mode of the Garrett AT Max allows the operator to fine-tune the detector and store these settings as a custom mode. The metal detector will remember these settings even when switched off so you can go back to them at any time.
True All Metal
This mode will detect all different metals both ferrous and non-ferrous. Whilst also giving maximum depth capabilities and maximum sensitivity.
This setting is very similar to all metal mode, however, will give the detectorist a much more detailed informative response on the target using the iron audio.
The coins mode has been pre-setup by Garrett and optimised for coin shooting. Discrimination has already been set so you can use this mode if you’re in a hurry and you want to eliminate all ferrous metals.
Garrett AT Max Best Settings
These settings are in my own opinion and highly depend on the ground you are detecting on. If you have any advice on the best settings for the Garrett AT Max then please feel free to leave a comment below.
I would recommend putting the AT Max into Pro Zero mode, a discrimination setting of 30 and setting the sensitivity to two notches from maximum.
Garrett AT Max Owners Manual
You can download the Garrett AT Max owners manual in?PDF format here.
Garrett AT Pro Vs Garrett AT Max
Many people are asking if there is much difference between the two all-terrain metal detectors.
In my opinion, I would say the biggest noticeable difference is the audio. The AT Max adapts the audio from the AT gold. So if you are used to the AT Pro sounds this could be quite a shock as they are totally different. If you’re already an AT Gold owner then you will be used to the change.
Where to buy Garrett AT Max?
The best places to buy the Garrett AT Max I’ve found so far are eBay and Amazon. Your purchase is secure and guaranteed this way. They are also very competitive in prices.
There are other places like Joan Allen or Detecnicks to these are high street stores where you will find metal detectors and accessories.
[su_button url=”https://www.amazon.co.uk/Garrett-AT-Max-Metal-Detector/dp/B0764H9QQL/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=drtvs-21&linkId=a2fbd2438093447f032f8249b07340da&language=en_GB” target=”blank” style=”flat” background=”#27ae60″ size=”5″ center=”yes” icon=”icon: shopping-cart”]Check Amazon[/su_button]
All around this is a fantastic all terrain metal detector by Garrett. Garrett, as mentioned earlier, are the worlds leading metal detector manufacturer so you can be sure they know what people want. They’ve produced some truly amazing machines setting the standards for the competition. They have not let us down with the Garrett AT max!
For a? seasoned detectorist, the Garrett AT Max will prove a very productive and reliable piece of kit. It does not miss targets and it goes?a little deeper in comparison to its predecessors.
It’s designed for all different conditions so whether you’re in highly mineralised soil or in?the sea the detector will not fail you. It will still find and perform.
The build quality is fantastic, it’s not going to break. It’s sturdy but lightweight allowing you to be out all day long and not fatigue.
I would highly recommend this machine. I’ve had a couple of days using one and when I can afford it I will have this in my arsenal.
Garrett also claims to have improved the performance when handling salt water in comparison to the AT Pro & Gold. Which will be welcomed for beach detecting.
How does it fair with the Minelab Equinox 800? Well, that’s something we will soon find out upon release. They are set to compete well I believe.
[su_button url=”https://www.amazon.co.uk/Garrett-AT-Max-Metal-Detector/dp/B0764H9QQL/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=drtvs-21&linkId=a2fbd2438093447f032f8249b07340da&language=en_GB” target=”blank” style=”flat” background=”#27ae60″ size=”5″ center=”yes” icon=”icon: shopping-cart”]Buy Garrett AT Max Here[/su_button]
Garrett AT Max Pro?s & Con?s.
|Fully submersible and waterproof||wireless headphones not waterproof|
|Fantastic Wireless tech||A little pricey|
|Very powerful in regards to depth capabilities|
|Heavy duty but lightweight|
Garrett AT Max Technical specifications.
|True All Metal Mode||Yes|
|Control Box Backlight||Yes|
|Ground Balance||Auto & Manual|
|Waterproof||up to 10 feet (3m) fresh and salt water|
|Digital Target ID||Yes|
|Length||43″ to 56″|
|Batteries||4 x AA|
|Battery level indication||Yes|
|Warranty||2 Years, Limited parts & Labor|
Garrett AT Max Video’s.
Reviews of the insurance company “MAKS”, opinions of users and clients of the insurance company
I will say everything in short, since I think that a detailed review will not fit here. Insured in this company under OSAGO, number *** from 07.12.20 to 06.12.21. Insurance case number ****.
01/19/21 an accident occurred as a result of which I was the victim. 01/21/21 I arrived at the insurance and got into a queue of 20 people. In an hour, I will move exactly one person forward, went to find out about an alternative method of filing documents.It turned out that you can …
I will say everything in short, since I think that a detailed review will not fit here. Insured in this company under OSAGO, number *** from 07.12.20 to 06.12.21. Insurance case number ****.
01/19/21 an accident occurred as a result of which I was the victim. 01/21/21 I arrived at the insurance and got into a queue of 20 people. In an hour, I will move exactly one person forward, went to find out about an alternative method of filing documents. It turned out that you can sign up for a specific day and a specific time.The closest free date was 02/10/21 at 9:30.
Came on the appointed day and the appointed time, and they told me that I was already the second at 9:30 and if it happened for some reason, then wait for an unknown amount of time, although they themselves made out the person who still came at 9:00. In general, I was there for about two hours. The examination was scheduled in a service unknown to me, on the other side of the city, on a certain day and time, with no alternative. I have been working for days and asked to wait so that I can see if I can on this day at all or not.To which he received the answer “either so or not, you have no options.”
In general, he showed the car, received a payment of 75000r., Although he wanted to have it repaired by the dealer, since the car was a month at the time of the accident, but they said only in money, since there is no contract. Came to the dealer, put it in for repair. They removed the bumper and voila, there is hidden damage. At a minimum, the headlight needs to be replaced, a new headlight costs ~ 75000r. It is not clear what prevented the strazovaya from conducting a normal inspection, no one interfered with them.He started calling the insurance company, and they shrug their shoulders like fig knows how to be. I went to write an official statement.
As a result, an additional inspection was carried out with grief in half, while no acts were drawn up on the spot, the manager took a picture and just left. After they called and reported that they counted an additional payment of 90,000, when they arrived it turned out to be 83,000. Absolutely any communication with employees was accompanied by their boorish behavior, an eternal raising of the voice, and so on. They had not even heard of the norms introduced in connection with the covid, they had never seen an employee wearing a mask… I also forgot to tell you something: at the first paperwork, I gave the manager a document from the traffic police about the accident. To which, to put it mildly, they “ran over” for the fact that the handwriting in this document is illegible and she does not understand what is written here. In her opinion, I should have made the traffic police inspector write more accurately. And they began to demand from me a photocopy of the documents of the perpetrator of the accident, why should the traffic police give me the personal data of another person?
02/18/21 I registered an appeal to the MAKS company through their official website about which I received a confirmation to my e-mail with e-mail.mail [email protected] Request number *** and ***. On the same day I received the answer “the answer to your question: thanks for contacting me! The information was passed on to the company’s management. An administrative investigation will be carried out on this fact ”.
After that, no more replies from the company came to me. Although in an amicable way they should have answered normally. For most of the episodes described above, I have video and photo evidence, which show both employees without a mask and conversations, etc.By the way, in the appeal to the Moscow office with a complaint, I also indicated about the masks and attached a photo, but at the moment nothing has changed. Employees still do not comply with the norms prescribed by the decree of the governor of the Samara region dated December 16, 2020 number 365. When I last came and I was actually informed about the payment of 83 thousand instead of 90, I asked to call the management, but the management was not there.
Reviews and thanks for the work of MAX Clean Room
CJSC “Corporation OLIFEN” expresses its gratitude to the employees of the group of companies “Max Klin Room” for the fruitful and successful cooperation.
We appreciate you for providing high quality services for the supply and installation of equipment for clean rooms in our company, for your creative professional approach, constant readiness and efficiency in solving various problems.
We express our confidence in the preservation and strengthening of the established business relations and look forward to long-term cooperation.
OLIFEN Corporation CJSC
The construction work carried out by MAX Clean Room to create a complex of clean rooms of 200 m2 for the production of surgical suture material of OOO Footberg corresponds to the architectural and construction project developed by RUE MedBioPharmProject.
A good level and proper quality of construction work is conducive to further cooperation with MAX Clean Room.
With this letter, we would like to express our gratitude to MAX Clean Room for the implementation of a project to create a complex of clean rooms for mixing and pouring chemical reagents in order to obtain a reagent for IVD diagnostics.
The validation tests carried out confirmed the compliance of the cleanliness classes of the created complex of clean rooms with GMP standards.
MAX Clean Room is distinguished by high professionalism and efficient organization of work. Our company was satisfied with the cooperation with the company and looks forward to further long-term contacts.
EDS LAB LLC
By this letter we would like to thank the MAX Clean Room group of companies for cooperation with our company and work on the creation of clean rooms for the laboratory for the selection of seeds of the new Botanical Garden under construction in the city of Nursultan.In a short time, MAX Clean Room has manufactured, delivered and installed the clean rooms on site in accordance with our cleanliness requirements.
We would like to express our gratitude to the design and installation department of MAX Clean Room for the successful implementation of our project. We will be glad to contact MAX Clean Room again.
Aversgroup KZ LLP
GAUZ “OIMTs” expresses its gratitude to the employees of the group of companies “Max Klin Room” for their professionalism in work and efficiency in the execution of ordered work on the supply of transfer windows.Competence of specialists, quick solution of issues arising in the course of work, responsibility and adherence to delivery times made cooperation with the Max Klin Room group of companies pleasant, fruitful and effective.
SmolenskTeploKor LLC expresses its sincere gratitude to RBI ENGINEERING LLC for high-quality production and timely delivery of materials, as well as for the assistance provided in the organizational issues that have arisen.
We sincerely wish you and your company prosperity and success, health, happiness and prosperity to all employees of your team.
We look forward to further cooperation.
Bul Production RUS LLC expresses its gratitude for the fast and high-quality execution of our non-standard order. I would like to note that your company is one of the few who completed the project as quickly as possible, while providing a full turnkey service.From the first contact you feel that you are working with a team of professionals!
LLC “Bul Production RUS”
Joint-stock company “TRONIK” (JSC “TRONIK”) expresses gratitude to the employees of the group of companies “MaxKlinrum” and LLC “RBI Engineering” for high-quality production and timely delivery of equipment.
Competence of specialists, quick solution of issues arising in the course of work, responsibility and adherence to delivery times made cooperation with the MaxKlinrum group of companies pleasant, fruitful and effective.
TRONIK JSC was satisfied with the cooperation with the company and looks forward to further long-term contacts.
FSUE SPC “Pharmzashchita” FMBA of Russia expresses its gratitude to the employees of the group of companies “Max Klin Room” for the fruitful and successful cooperation.
We appreciate you for providing high quality services for the supply and installation of equipment for clean rooms at our Enterprise, for your professional approach and efficiency.
We express our confidence in the preservation and strengthening of the established business relations and do not look forward to long-term cooperation.
FSUE SPC “Pharmzashita”
StellaStroy LLC expresses its gratitude to the employees of the Max Klin Room group of companies for the fruitful and successful cooperation.
We appreciate you for the performance of services for the supply of envelope structures for clean rooms at our construction sites, for your professional approach and efficiency.
We express our confidence in the preservation and strengthening of the established business relations and look forward to long-term cooperation.
Reviews of the Russian receiver S-Max Geo
First impressions of users of the Russian receiver S-Max Geo
What kind of GNSS equipment do cadastral engineers need?
Evgeny Lisyonkin, cadastral engineer (Novosibirsk)
“My main work profile is stakeout, clarification of boundaries and division of land plots.Measurements with a satellite receiver are carried out mainly in RTK mode from a network of permanent GNSS base stations of the Novosibirsk region (PDBSNSO).
I have been cooperating with the InterGeo company (Novosibirsk), which is engaged in the sale of equipment and metrological checks, for several years already. When the question arose about purchasing a new GNSS receiver, I turned to the company’s specialists.
As a cadastral engineer, the value for money of the device is important to me. Based on this principle, I was offered the SMax GEO GNSS receiver, having carried out its demonstration and testing.The satellite receiver attracted my attention, first of all, for its functionality, at a low cost in comparison with other models.
GNSS receiver SMax GEO reliably operates in modes – statics, kinematics, RTK, stably maintains communication with the network of PDBS NSO. Receives a large number of satellite signals and quickly obtains a fixed solution even in places where signal reception is difficult. I really liked that, unlike other geodetic satellite receivers with which I had to deal with, SMax GEO confidently works in areas covered with forests, as well as near buildings.In case of loss of a fixed solution, he quickly restores it, saving time and hassle.
A smartphone with Survey Mobile software is provided as a controller. Its easy-to-understand menu provides portability and ease of use for field measurements. It is also pleasant to note the reliable and powerful Bluetooth connection between the controller and the receiver, even at a distance of 20–30 m between them. Among the negative points is the small capacity
battery and the presence of the Android operating system (OS) on the smartphone when used to iOS.I would also like to add an electronic level.
I can recommend this satellite receiver to cadastral engineers, builders, general surveyors as a modern, inexpensive and high-quality device. ”
What functions of GNSS equipment are most in demand when working on linear objects?
Dmitry Pavlov, Executive Director, Norpa LLC (St. Petersburg)
“The main activity of our company is geodetic work to support the construction of linear objects: taking out the project in nature, control of road construction and trenching, executive survey of completed construction sites.To carry out these works, we purchased a set of two SMax GEO GNSS receivers with built-in VHF modems from Imperikom CJSC (St. Petersburg), paying particular attention to their range. With the help of this receiver in RTK mode, individual points, axes of roads and trenches are set out, sections for warehouses, etc. The main communication channel when working in RTK mode is a VHF modem with a power of 2 W, which allows you to measure the coordinates of points at distances of up to 5 km from the base receiver.In some cases, to increase the stability of the signal, an external antenna was connected to the VHF modem, raising it on the pole. Another communication channel in RTK mode was also used – built-in Bluetooth (extended range).
As indicated by the manufacturer, it should work at a distance of up to 800 m. The Bluetooth connection was stable, the work was carried out within 100-200 m in an area with easy terrain. This mode consumes less battery capacity (than a VHF modem), which is important for this type of receiver.When using a VHF modem to transmit data from a base station, the battery capacity is only
for 3 hours. One drawback should be noted – you can change the battery only by turning off the receiver. The fact that SMax GEO has the ability to receive RTX corrections from a satellite (paid subscription) allows you to work without a base station. According to the declared technical characteristics when using this mode during the first initialization within 30 minutes, the coordinates are determined with an accuracy of 5-10 cm. In fact,
after about 10 minutes, a horizontal accuracy of less than 10 cm is achieved.The receiver comes with Spectra Precision (Division
) Android Survey Mobile field software.
Trimble). The software solution is well thought out and easy to use. The main functions are present: staking, shooting, calculations, calibration, work with coordinate systems, as well as cartographic substrates, in
including in DXF format. The software allows you to perform measurements using the VRS technology (the principle of a virtual base station), although this method is not yet very common in Russia.GNSS receiver SMax GEO can work in the field and with other programs – Survey Pro and SurvCE / SurvPC. The advantages of this device include: low weight, good equipment in the supplied configuration, workmanship, ease of use (the UKVantenna is hidden in the milestone), the minimum of necessary settings, the availability of software for a smartphone with Android OS. Cons: one battery in each receiver (two included), there is no built-in GSM modem. Summing up our little experience, we note the following: we definitely recommend the SMax GEO GNSS receiver for geodetic work when ensuring the construction of extended linear objects, since the advantages outweigh the disadvantages.In order to extend the operating time of the receiver in the cold season, it is worth purchasing several spare batteries for standard Trimble equipment (satellite receivers of the Rx series, Dini digital level), which does not require large expenses. ”
The SMax GEO GNSS receiver is the choice for start-up companies or for those who are already firmly “on their feet” and have more than a dozen devices?
Ilnur Gainutdinov, surveyor, Engineering company “Dejavu” (Kazan)
“Our company has been successfully operating in the construction services market since 2002.During this time, considerable experience has been accumulated in the use of GNSS receivers of various brands. This year in the company “GeoMetService”
(Kazan) purchased a set of two SMax GEO GNSS receivers. I would like to share my first impressions of working with him. Of the positive aspects, it should be highlighted:
– a good package, including everything you need to carry out measurements, namely, a lightweight carbon pole for mounting the receiver and a durable case;
Is an excellent smartphone field software for surveying and controlling the receiver, which is easier and more intuitive than SurvCE software offered by most manufacturers.
An important factor in choosing SMax GEO was the financial issue. In my opinion, there is currently no better offer on the market in terms of price / quality ratio.
I would also like to draw your attention to several design flaws:
– no “hot” battery replacement;
– lack of a built-in GSM modem and the ability to work via a “voice” channel;
– the lack of a device for attaching the smartphone to the pole.
It is a little embarrassing that a competent user manual for working with the program for Android OS has not been prepared, although it is quite understandable for most users.
If we talk about the measurement process using the GNSS receiver SMax GEO, it should be noted good reception of the satellite signal, minimum initialization time, high reliability of the solution, long time of holding fixed solutions after the loss of corrections (satellites), stable operation in difficult conditions (dense urban development, partially closed sky) “.
Yuri Pervukhin, Director, OOO EXPRESSSTROY T (Tula)
“Our company is engaged in the construction of communication lines, and we did not need high accuracy of geodetic measurements before. As a rule, we did without the help of surveyors, but there were cases,
when it was necessary to accurately determine the area of work in order not to get into someone else’s territory, or not to damage the existing cable communication lines, water pipes and other objects hidden underground.There were no surveyors on the staff of the company; they had to hire outside specialists with their own equipment to perform surveying work. In most cases, the measurement volumes were small and that was fine with us. But as the volume of work increased, it became clear that the company needed to purchase its own GNSS receiver.
I started exploring different options and contacted Precision Positioning Systems (PPS), which specializes in the sale of Trimble surveying equipment.They explained that for
of our work, the best option in terms of price-quality ratio will be the SMax GEO GNSS receiver. The undoubted advantage was that the receiver did not have to buy a controller and accessories, so
how the included Android smartphone is used as a controller. After consulting with a familiar surveyor, I decided to purchase this device.
Since I had not previously worked with geodetic equipment, STP employees conducted an introductory briefing.Everything turned out to be simple and intuitive, the Survey Mobile software interface on the
on the smartphone the Xiaomi controller did not raise any questions for me. For a month of operation, the device showed itself very well: it accurately determined the coordinates and perfectly maintained communication with the base station.
I cannot compare SMax GEO with other devices, but, despite this, I confidently recommend it to cadastral engineers and fellow builders as an inexpensive and multifunctional geodetic satellite receiver ”.
Source: GeoProfi magazine No. 4 2017
Work at MAKS Insurance Company
Positive aspects of the employer
Good day! I previously worked at CJSC “MAKS” and not so long ago I quit: I got a job in another Company, for a higher position and a higher salary. When I got a new job, I read reviews about my Company and, for the sake of interest, I decided to read about the one in which I worked at that time, i.e. about MAX and to be honest, I was very surprised.Well, the fact that there are few good ones is clear, when everything is good, there seems to be no point in writing, and the negative comes only from offended people.
I will also write my opinion: I was lucky – the team was very good in my department. In fairness, it is worth saying that this is not the case in all departments, there were also unpleasant personalities: but that is, the women’s team. I came right after the institute to a simple specialist (leader), six months later I was promoted to a chief specialist. The salaries, unfortunately, are really below the market, so when I was offered the same position in another company, but with a lot of income, I agreed.But I can’t say anything bad about MAKS as an employer, I had an adequate boss, close to the metro, there were no delays, no vacation problems and b / l (who wrote that they were fired there for b / l – frank lies .. although if you take the fifth b / l for the year and post photos from the Maldives on Instagram – I admit))), the dining room is cheap, which is also very important, no need to fool around where to eat in the center of the capital so as not to go broke. What concerns the salary 60% to 40% – everyone paid me! To my colleagues too! But I know those to whom fines were applied (not all 40% were cut, but a small part), for example, if you are often more than 10 minutes late for work (for 7 delays by 15-20 minutes per month, my friend was not fined, but asked to write an explanatory note, another one, also for systematic delays, was punished by three thousand, it’s lucky, but it’s easier for me not to be late), they are fined for not going to work without a good reason, sellers who have not sold anything… I have not heard more cases! Everybody gets everything. By the way, not in all positions of the salary. below the market, but there are, however, many of them. But I got invaluable experience in a large company, for a lot of money they didn’t hurry to call me to others right after university, but then they took me and I didn’t regret anything, I liked my work. Therefore, to put it mildly, I was surprised how much negativity people write … whoever is ready to work will do it, and whoever is not will be forever unhappy that he was not provided with a servant with a fan near his personal throne at his workplace…
90,000 Ford S-MAX Owner Reviews
4.2 (reviews: 25) *
Use the Year of Manufacture Filter to select a sample of Ford S-MAX reviews for a specific year.
By and large a great car! Gorgeous rulitsya, luxurious comfort, for travel you could not imagine better! Around the city of a 2 liter gasoline engine for …
Large reliable family car. If you do not take into account the executive limousines – absolutely the most spacious cabin of all cars.Huge trunk. Three identical seats in the second row, individually adjustable. Common and affordable consumables and spare parts (everything from Mondeo). Lightweight stability and handling. Gasoline consumption: 10 liters in the city and 8, 5 on the highway. 6
Economical, reliable, spacious. Adjusting the seat allows you to comfortably sit behind the wheel for both a not tall driver and under two meters in height. Huge …
Traveled 16,000 km, a two-liter diesel engine (143 hp) pulls great both on the bottom and above.It picks up perfectly, especially during sharp maneuvering, associated with changing lanes from …
5 Ford S-MAX is a wonderful car. Of the advantages, it can be noted a moderate consumption of gasoline 10-11 / 100, and this is with a fairly active driving. The dynamics are excellent. As for sound insulation, it is 5-ku. The seats inside are like on a bus, the seats are comfortable (especially the side supports). The interior will give odds even to many new cars. Service, spare parts are inexpensive and work too.Also, in the pros, you can write down the absence of a timing belt (there is a CHAIN), but its service life is at least 300 thousand km (this is according to the passport), so problems with replacing the timing belt can be discarded immediately (and, accordingly, costs). In general, the car is super! 6 Ford S-MAX is a great car, spacious. Easy handling, a woman can ride freely. Spacious trunk. Not expensive maintenance, oil change with filters – in the region of 6 thousand. Advantages of the car: Economical, consumption of 6 liters per 100 km of diesel. I did not observe any cons.Ford S-MAX is worth taking.
By position I am an administrator, but in reality I am a cross between a supply manager, a driver and a chief over couriers. The minivan itself belongs to the general, but it seems to be used for the needs of the company. Periodically …
Hello. To begin with, I will explain why this particular model, I had to choose from: Galaxy (I simply did not find a suitable configuration), Zafira (I can’t digest Opel organically), Fiat Alhambra …
Hello buyers of my new car! I would be glad if my review helps It’s up to you whether you need an S-Max or not.Context. Ford S-Max 2011 / Titanium / Diesel 2, 0 bought new in July 2011 …
As a post I am an administrator, but in reality – a cross between a manager, a driver and a chief over couriers. The minivan itself belongs to the general, but it seems to be used for the needs of the company. Periodically …
I have owned this masterpiece since February 2008. Fell in love at first sight back in 2006, when I saw it for the first time in the salon. The car is operated most of the year beyond the Arctic Circle. Necessary…
S-max ran 52000 km in 1.5 years. Took the maximum configuration in February 2009. with discounts like last year. Recently got into an accident through no fault of my own. “Racer” 24 years old …
Hello everyone! I would like to share my impressions of the S-MAX 2.0 Trend. Now the mileage is 35 thousand km. Pros. Nice, solid appearance. Large spacious interior, freely on the first, on …
Traveled 16,000 km, a two-liter diesel engine (143 hp) pulls excellently both at the bottom and above.It picks up perfectly, especially during sharp maneuvering associated with a change of lane from …
Ford S-MAX, Titanium grade, engine type: 2.0 Duratorq TDCi 16V. I drove 2000 km – I can draw at least some conclusions. Handling, speed gain, comfort – beyond praise. …
* Average rating based on 25 reviews of Ford S-MAX owners posted on the site.
What you need to know about the iPhone 13 and iPhone 13 Pro. First reviews
iPhone 13 shipments haven’t started yet, where did the users come from? Some of the simple estimates were provided by Apple to try and appreciate.For a while, but “for so”. And yesterday they were allowed to share their impressions, accumulated over a whole week with the iPhone 13, and you will not believe – they have the most positive impressions. Are they lying? I do not think. In just a couple of days, their lies would have been exposed. There is no point in lying – they will no longer be believed, and next year no one will let them try the next iPhone. What do they write about “the most boring iPhone generation ever”?
Sales of the iPhone 13 have not yet begun, but there are already reviews of the first users about the new product.
Each of the four iPhone 13 models has drawbacks.They all charge more slowly than Android smartphones. All iPhone 13 models are heavier than similar models iPhone 12. iPhone 13 mini is 6 grams heavier, iPhone 13 by 10, iPhone 13 Pro by 14 and iPhone 13 Pro Max by 12. The extra weight is felt, but people quickly get used to it and stop noticing it. And the body has grown fatter. By a quarter of a millimeter, from 7.4 mm to 7.65. But the battery charge has increased, as well as the battery life. iPhone 13 Pro Max weighs 240 grams.
Spent a day with the iPhone 13 Pro and here's what I think of it
He’s the heaviest flagship smartphone this year.Another downside to the iPhone 13 is its bad reputation. Someone tried very hard to be considered pale copies of the iPhone 12. Those who were given the opportunity to “play” with new products that are preparing for release, greeted them cool. The packaging surprised me. The extra weight was an unpleasant surprise. And, with the exception of the new coloring, at first glance, the iPhone 13 looks no different from the iPhone 12. But in the very first minutes of acquaintance with the pale copies, everything changed.
Why iPhone 13 mini is better than 12 mini
iPhone 13 mini is the best compact smartphone on the market
I like small smartphones.It all depends on what the smartphone is used for. For so many people, the form factor of the iPhone 12 mini, iPhone 13 mini, and even the second generation iPhone SE is nearly perfect. Rumors about the death of small smartphones are somewhat exaggerated. iPhone 13 mini is the most powerful smallest smartphone in the world and in history. This advantage in real life does not manifest itself in any way. Almost nothing, in rare situations.
iPhone 13 review: photo quality, display, differences from iPhone 12 and others
It is expensive for those who consider a smartphone to be a communication device.Although now in its version for 69,990 ₽ not 64 GB, but 128 GB. A bright screen, an extra hour and a half of battery life (and with a typical for small smartphones way of using the battery charge for an unprecedentedly long time). Great cameras, just like the normal-sized iPhone 13. The iPhone 13 mini didn’t disappoint, but it didn’t captivate testers either. It was given to the wrong people to try.
Differences between iPhone 13 and iPhone 12
iPhone 13 turned out to be better than iPhone 12 in almost all respects
Bright screen that is pleasant to use even in sunny weather. The smartphone is no worse than the iPhone 12, but it is cheaper. In its variant for 79,990 rubles, not 64 GB, but 128 GB. The variant with the maximum storage capacity, in the iPhone 13 it is 512 GB, costs 109,990 rubles. The battery charge lasts for an extra 2.5 hours of video viewing. With very heavy use, the difference is almost imperceptible.
Which is better to buy: iPhone 13 or iPhone 13 Pro
The power of the central and neural processors is higher than before – but you can only notice this on rare occasions – a colleague tried this iPhone during the day and talked about it.There were casualties among those who tried the “pale copy” during the week. This model is contagious. Several testers came to the conclusion that they would not survive parting with the iPhone – and ordered it. One of them, knowing full well that buying a new iPhone every year is bad form, and contrary to the spirit of modernity – but his iPhone 13 with 256 GB of flash memory will become the third iPhone in the last three years. Before that there were iPhone 11 and iPhone 12.
iPhone 13 Pro or iPhone 13 Pro Max
tasks), a camera system of three sensors.I will not retell the specification of this iPhone. Bright screen, increased power that is almost not felt, pleasant heaviness in the hand (when you get used to it). As in the case of its classic counterpart, skepticism about the new product disappeared as soon as you start using it. In reviews, it is called the best iPhone Pro, some clarify that there is an even better iPhone 13 Pro – larger in size. Emotions? In fact, if a smartphone evokes strong positive emotions, this is half of its success. After returning the iPhone 13 Pro to Apple, some of the testers immediately ordered the same one.
How much faster the iPhone 13 Pro is than the iPhone 12 Pro
In my opinion, the iPhone 13 Pro Max is too big and heavy. But it’s hard to break away from him. A year ago, I used the iPhone 12 Pro Max for a couple of weeks. Then he got rid of bad habits. It tightens up. iPhone 13 Pro Max is the next best iPhone of the year, and rightfully so. Better not even try. A faster charging monster would not hurt, though. For him, this is not a whim, but a necessity. But, apparently, this would have to sacrifice something even more important, engineering is not accidentally called the art of compromise.
Galamart – there are never too many purchases
Choose the method of receiving your order so that we can offer you the most current assortment.
Attention! Not all items may be available for collection at the selected address.
Attention! Not all items may be available for collection at the selected address.
When choosing a delivery, you can order goods that are available in the nearest store from where the delivery is carried out.
When choosing self-pickup, you can order goods that are available in the selected self-pickup store.
To order items that are not available for the selected pickup address, change the shipping address or pickup store.
Enter your shipping address to continue shopping
Deliver to this address
Select a pickup store to continue shopping