When it comes to rugged, durable coolers built for outdoor adventures, it’s hard to beat the legendary Yeti Tundra. And the Tundra 210 is one of Yeti’s most popular sizes – not too big, not too small, just right for most uses. Before you plunk down your hard-earned cash on this premium cooler, here are 15 must-know facts to consider.
Built Tough for the Outdoors
Unlike cheap plastic coolers that crack and fail after a few uses, the Tundra 210 is built rugged. Its rotomolded construction makes it virtually indestructible and able to handle being bounced around dirt roads or dragged over rocky terrain. This thing can take abuse that would destroy lesser coolers.
Holds Up to 210 Cans with 2:1 Ice-to-Contents Ratio
With an interior volume of 316 ounces or 9.8 gallons, the 210 can hold up to 210 cans with a recommended 2:1 ice-to-contents ratio. That’s plenty of space for food and beverages for several people for days of camping, fishing, hunting, or beach trips. The walls are thick, but the interior dimensions are still generous at 17.625″ long x 16.125″ wide x 15.375″ high.
Rotomolded Construction is Virtually Indestructible
Rotomolding creates seamless, one-piece construction by pouring polyethylene plastic into hollow molds and rotating them as the plastic hardens and conforms. The result is cooler walls so thick and tough that many owners claim they can stand on them without denting. Good luck trying to tear through or puncture these walls!
FatWall Design Provides Superior Insulation
In addition to toughness, the rotomolded walls give the Tundra 210 excellent ice retention. The FatWall design maximizes insulation while using less material than many other rotomolded coolers. The extra-thick plastic walls and lid effectively block outside heat from warming the contents.
InterLock Lid System Creates a Tight Seal
An excellent gasket and strong InterLock latch system allow the Tundra to achieve an airtight, waterproof seal when closed. The freezer-quality gasket prevents air exchange and moisture loss. Dual-stage compression on the self-stopping hinge and indestructible rubber latches keep the lid tightly clamped down.
T-Rex Lid Latches Are Easy to Open and Close Even with Gloves
The patented T-Rex lid latches on the 210 are oversized for easy opening and closing, even while wearing thick gloves. Just flip up the rubber tab to open and press down firmly to close securely. The latch keepers won’t snap off like cheap coolers either.
Non-Slip Feet Keep Cooler in Place
Some coolers slide around or tip over too easily, spilling their wet contents in your vehicle or boat. But the Tundra 210 has non-slip rubber feet that grip most surfaces and keep it planted where you put it. No more cooler creep and tip overs!
Vortex Drain System Empties Melted Ice Faster
A full-length drain with anti-clog vortex design makes it easy to empty melted ice water in seconds without tilting and wrestling with the heavy cooler. Just remove the leakproof plug and let the vortex do its thing. Draining regularly helps keep contents cold.
Dry Goods Basket Helps Organize Gear
The 210 comes with a handy dry goods separator basket to help organize and protect food, electronics, or other items you don’t want getting wet in the ice. No more soggy, wrinkled clothes or food packages!
AnchorPoint Tie-Down Slots for Securing on Boats or Trucks
Integrated AnchorPoint tie-down slots make it easy to secure the 210 in trucks, boats, ATVs, etc. using rope, bungee cords or straps. The slots are molded into the walls so there’s no risk of ripping out like inferior coolers.
BearProof when Locked with Separately Sold Locks
The Tundra 210 is certified BearResistant when used with separately sold Yeti custom locks installed on each corner. This gives peace of mind when camping or fishing in bear country and locking up food.
Hassle-Free 3 Year Warranty from Yeti
Yeti stands behind the Tundra 210 with a 3 year limited warranty covering defects in materials and workmanship. That shows the confidence they have in these coolers to perform for years even under heavy use and abuse.
Variety of Custom Color Options Available
If you don’t like the default white, the Tundra 210 is available in popular custom colors like tan, gray, desert tan, ice blue, seafoam and more. You can easily personalize it to suit your style or team colors.
Made in the USA – Built for the Wilderness
Yeti Tundra coolers are proudly designed, engineered and assembled in the USA, not outsourced and cheaply made overseas. The premium quality builds make them perfect for hunters, anglers, and outdoor enthusiasts who need a heavy-duty cooler.
Priced Under $350 Makes It Accessible for Most Budgets
Considering the Tundra 210’s impressive durability, insulation and features, its sub $350 price tag makes this premium cooler accessible for more buyers. It’s a hefty investment over cheap coolers, but one that pays off for years if not decades of service.
When selecting a cooler for your next adventure, capacity is king. You want to be able to fit all the beers, sodas, water bottles, sandwiches, snacks, and anything else you need to keep cool and dry. Here’s the scoop on what the Yeti Tundra 210 can hold.
Holds Up to 210 Cans with 2:1 Ice-to-Contents Ratio
This rugged cooler lives up to its name with a whopping 210-can capacity. That’s with following Yeti’s recommended 2:1 ice-to-contents ratio. Fill er’ up with 210 frosty beverages, and you’ll still have room for a healthy bed of ice above and below to keep things chilled for days.
We all know how frustrating it is to buy cheaper coolers labeled with unrealistic capacity claims. Claims made with no ice, or way less ice than needed. Those setups maybe fit the claimed cans, but everything ends up lukewarm in a matter of hours.
Not so with the Yeti. You can actually fit 210 cans with enough real, cube ice to deliver superior, long-lasting insulation. We’re talking ice lasting 5+ days if pre-chilled and kept closed in less extreme conditions.
To get the most days of ice retention, consider a 3:1 or even 4:1 ice-to-contents ratio. This leaves extra ice as a thermal mass buffer to absorb warming and melting. You may only fit 120-150 cans instead of 210, but your drinks and food stay colder longer.
Generous Interior Size Dimensions
The Tundra 210 has an impressive 9.8 gallon or 316 ounce internal volume. The dimensions are 17.625 inches long x 16.125 inches wide x 15.375 inches high.
That’s big enough to hold whole foods like watermelon, pineapple, cabbage, etc. vertically or stacks of sandwich ingredients. Unlike cheaper coolers where odd shapes and sizes are tough to fit.
The 210 provides ample room for all your beverages, sandwich fixings, proteins, fruits, veggies, dips, desserts and more for a full day or several days worth of camping meals and snacks.
With careful planning, you can even pack enough food in the 210 for 1-2 people for a quick weekend camping trip or picnic.
Dry Basket Organizes Non-Perishables
To keep frequently accessed, non-perishable items dry and organized, the Tundra 210 comes with Yeti’s trademark Dry Goods basket. This accessory sits atop the ice and payload to separately hold things like:
- Utensils
- Plates
- Cups
- Napkins
- Electronics
- Car keys
- Wallet
- Medications
- Tools
The basket has a handle for easy access and rubber feet to keep it in place. No more soggy, wrinkled clothes or electronics.
For optimal cooling efficiency, only open the cooler when necessary and don’t mix too many non-perishable items in with beverages and foods. But the dry goods basket offers quick access without letting all the cold air escape.
When every inch of space counts on a weekend trip or day outing, the Tundra 210’s capacity gives you flexibility. You can comfortably carry supplies for several people with strategic packing and the dry goods basket.
When you’re looking for a cooler that can endure years of outdoor adventures, durability is crucial. Cheap plastic coolers just can’t survive the rough-and-tumble lifestyle for long. Here’s why the roto-molded construction of the Yeti Tundra 210 makes it virtually indestructible.
Rotomolded Construction is Virtually Indestructible
Yeti specifically chose roto-molding to create the Tundra series because this manufacturing process results in seamless, ultra-durable plastic construction. It’s the same technique used to make tough kayak hulls and industrial watertight containers.
Rotomolding involves pouring hot, liquid polyethylene resin into a hollow mold. As the mold spins biaxially, the plastic coats every surface and solidifies into a uniform thickness.
The result is one solid, continuous piece of extra-thick plastic that provides unmatched strength. No weak seams, cracks or thin spots for failure points.
Withstands Punishment That Would Destroy Other Coolers
Thanks to this rugged construction, the Tundra 210 laughs off abuse most coolers can’t handle. Owners report standing and jumping on it with no dents. The thing can take a serious pummeling.
You can drop it off your truck or ATV into rocks and dirt without damage. Drag it over coarse sand and concrete without scratching or cracking. Knock it around on a rough boat ride without bashing in the walls.
While cheap coolers shatter and split open when dropped even once, the Yeti looks brand new after years of the roughest treatment imaginable.
Thick Plastic Won’t Puncture or Tear
Trying to stab or puncture the Tundra is futile. The walls are so thick that knives and sharp objects just glance right off. And the solid, molded construction means there’s no separating the layers or delaminating weaknesses.
Lesser coolers have razor-sharp edges that easily slice hands and limbs. But the Yeti’s smooth, rolled edges stay intact instead of snagging and tearing.
You don’t have to baby this cooler or fret over every nick and scratch chipping away its structural integrity. It holds up over the long haul.
Won’t Crack, Peel or Degrade
Repeated hot and cold cycles take a toll on cheap coolers as plastic expands and contracts. Small cracks develop into major ruptures once the elements seep in. Or the surface degrades under UV exposure.
But the Yeti’s polyethylene retains flexibility and impact resistance even in sub-freezing temperatures. And UV inhibitors prevent sun damage. No cracking, peeling, chipping or breakdown.
While most coolers become brittle, deformed hazards after a few years, the Tundra 210 stays intact season after season of harsh use and elemental exposure.
For a nearly bomb-proof cooler built to last decades, roto-molded polyethylene can’t be beat. The Yeti Tundra 210 proves it.
FatWall Design Provides Superior Insulation
The Yeti Tundra 210 cooler is one of the most popular high-end coolers on the market. With its rugged design and superior insulation, it’s built to keep ice frozen for days on end. But before you buy the 210 quart Yeti cooler, there are some key facts you’ll want to know.
First, let’s talk about the construction. The Tundra 210 features Yeti’s signature FatWall design – thick, pressure-injected walls filled with commercial grade polyurethane insulation. This offers incredible cold retention, keeping ice frozen for up to 10 days with proper pre-chilling. How does it work? The dense foam insulation traps cold air inside while blocking ambient heat on hot sunny days.
This high-end cooler also boasts a sturdy rotomolded construction. The exterior consists of a single sheet of polyethylene plastic folded around insulation, creating a virtually indestructible casing. It’s also UV-resistant and dry-ice compatible. The Tundra 210 can withstand the roughest conditions and adventures.
When it comes to features, this cooler has them in spades. The NeverFail hinge system is built for years of opening and closing, while the interlocking lid system forms a perfect seal to lock in cold. The T-Rex rubber latches are patented and specifically designed to stand up to hungry bears.
Looking inside, you’ll find the 210 has roughly 16 quarts more capacity than Yeti’s similar Tundra 200 model. It offers a 15-inch inside height and almost 16 inches of interior depth when fully loaded. The inside is seamless and molded, with no gaps for leakage or weak points.
As expected, this large cooler is seriously hefty when loaded up. Empty weight is about 29 pounds while loaded weight can exceed 60+ pounds. The Tundra 210 measures 30 1/4 inches long x 16 1/4 inches wide x 15 1/4 inches high.
When it comes to accessories, Yeti offers a wide range compatible with the 210 quart cooler. From tie-down kits to seat cushions, you can customize it for your needs. They also sell basket attachments like the SideKick Dry that latch onto the sides.
What about durability? Yeti is famous for over-engineering products to be virtually indestructible. The Tundra 210 is certified bear-resistant, made with heavy-duty components, and comes with a 5-year warranty. Owners praise its ruggedness after years of service.
Now let’s discuss price. The Tundra 210 costs $399.99 direct from Yeti. That’s certainly an investment, but fans say the superior cold retention and durability deliver great value over time. It’s built to last for many camping trips and outdoor parties.
When it comes to downsides, weight is the main complaint with the 210 size. Fully loaded, it’s bulky and hefty. You’ll need two people or a wheel kit to move it. Draining can also be tricky with deep inch-wide threads.
Yeti Tundra 210 owners praise the locking lid, thick insulation, and bear-proof design. It keeps ice longer than any other cooler they’ve owned. Fans say it’s worth the premium price for serious campers and outdoor enthusiasts.
So in summary, the Yeti Tundra 210 is packed with top-end features and will keep ice frozen for days. It offers incredible durability and performance. Just be prepared to handle the sizeable weight. But if you want one of the best coolers money can buy, it’s hard to top the rugged Tundra 210 quart from Yeti.
InterLock Lid System Creates a Tight Seal
The Yeti Tundra 210 is one of the hottest high-performance coolers around. With incredible ice retention and a durable design, this 210 quart Yeti has a lot going for it. But before you invest in this premium cooler, there are 15 need-to-know facts.
First up, let’s look at the construction. The Tundra 210 features Yeti’s patented FatWall design – extra thick walls filled with commercial grade insulation. This polyurethane foam is injected under pressure to create an exceptional barrier against heat flow. It gives the Tundra 210 the ability to keep ice frozen for 7-10 days!
This popular cooler also utilizes rotomolded construction. Made from a single sheet of polyethylene folded and molded around insulation, it’s virtually indestructible. It can handle rough treatment in harsh environments. The plastic exterior is UV-resistant as well.
When it comes to useful features, the Tundra 210 delivers. The patented InterLock Lid System clamps the lid down to form an airtight seal. This prevents precious cold air from escaping. The NeverFail hinges are super sturdy while the rubber T-Rex latches keep the lid secure from hungry bears.
Looking inside, the 210 quart capacity gives you ample space for food and drinks. With a 15 inch interior height when closed, you get almost 16 inches of usable depth when loaded to the max. The inside is seamless and molded for drainage and ice retention.
Given its substantial capacity, expect a loaded weight between 60-70 pounds. Empty weight starts around 29 lbs. The exterior dimensions are 30 1/4 by 16 1/4 by 15 1/4 inches making it a sizable cooler.
Yeti offers many accessories that are compatible with the Tundra 210 model. You can add tie-down kits, seat cushions, or wheeled attachments like the Sidekick dry box. Deck rails help secure the cooler in your vehicle.
This cooler is revered for its extreme durability. It’s certified bear-proof and made to handle years of rugged use. All components utilize over-engineered designs. Yeti stands behind it with a 5-year warranty.
Now let’s talk price. The Yeti Tundra 210 costs a hefty $399.99 direct from the manufacturer. It’s a premium investment, but fans insist the superior performance and longevity deliver great value in the long run.
In terms of downsides, the weight is the biggest complaint with the 210 size. You’ll need two strong people to move this beast when fully loaded. Draining can be slow due to the wide drain channel design.
Yeti Tundra 210 owners praise the InterLock Lid System, incredible insulation, and heavy-duty build. It keeps ice frozen longer than any other cooler. Durable enough for years of outdoor adventures. Fans say it’s worth the price.
In summary, the Yeti Tundra 210 offers exceptional ice retention thanks to its FatWall design and Rotomolded construction. The InterLock Lid System creates an airtight seal to lock in the cold. Just be prepared to handle the sizeable weight of this rugged cooler built for extremes.
Yeti Tundra 210 Cooler: The 15 Must-Know Facts Before Buying This Popular Cooler
Yeti coolers have become incredibly popular in recent years, and for good reason. These high-end roto-molded coolers are known for their durability, ice retention, and overall quality. One of Yeti’s most popular mid-sized models is the Yeti Tundra 210.
The Yeti Tundra 210 has a capacity of around 18 quarts, making it a great choice for camping, fishing, hunting, tailgating, and more. It’s big enough to hold food and drinks for a few people, but still small and portable enough for one person to carry.
If you’re considering this 210 quart Yeti cooler for your next adventure, here are 15 must-know facts to keep in mind:
1. Durable Construction
The Tundra 210 is made from heavy-duty roto-molded polyethylene plastic, which is extremely durable and impact-resistant. It can withstand being dropped without damage. The walls are up to 3 inches thick with PermaFrost insulation.
2. Bear-Resistant
This cooler is certified bear-resistant, meaning it passed testing against a full-scale bear attack. You don’t have to worry about bears accessing your food when camping in bear country.
3. Long Ice Retention
The Tundra 210 is engineered for long-lasting ice retention. With proper pre-cooling and loading, it can keep ice for 6+ days in hot weather. The thick walls and PermaFrost insulation trap cold air.
4. Fatigue-Resistant Hinges
The NeverFail hinges are made from heavy-duty molded polyethylene so the lid won’t fall off. They’re tested to open and close repeatedly without breaking.
5. Interlocking Lid System
The interlocking lid system forms an airtight, watertight seal all the way around. Combined with the rubber gasket, this prevents cold air loss and helps contents stay dry.
6. AnchorPoint Tie-Down Slots
Integrated AnchorPoint slots allow you to tie down the cooler during transport. This prevents sliding or damage in a truck bed or boat.
7. Molded-In Lock Ports
The Tundra 210 has molded-in padlock ports on the front corners. Use your own padlock for securely locking the cooler.
8. Heavy-Duty Rubber Feet
Non-slip rubber feet help keep the cooler in place on slick surfaces. They also elevate the base to minimize heat transfer from hot ground.
9. Molded-In Ruler
A molded ruler on the inside lid lets you quickly measure fish. It also doubles as a bottle opener for popping caps off drinks.
10. Vortex Drain System
The leak-resistant Vortex drain system uses a channeled design to quickly empty water from melted ice. No more tilting to try to drain it.
11. Dry Goods Basket
A dry goods basket fits inside the main compartment, providing extra organizational options. Use it for snacks, utensils, or personal items.
12. Color Options
The Tundra 210 comes in various colors including white, desert tan, ice blue, seafoam green, and more. Pick your favorite or choose based on your activity.
13. 5-Year Warranty
Yeti stands behind the Tundra 210 with a 5-year limited warranty against defects in materials or workmanship.
14. Made in the USA
Like all Yeti hard coolers, the Tundra 210 is proudly designed, engineered, and manufactured in the USA.
15. Popular Accessories
Customize your Tundra 210 with accessories like tie-down kits, seat cushions, wheel kits, and bear-resistant locks. You can really deck it out.
As you can see, the Yeti Tundra 210 has a lot going for it. The durable roto-molded construction, superior insulation, and handy features make it a top choice for a mid-sized cooler. If you want quality ice retention without going overboard on size, the 210 quart Tundra is an excellent option to consider.
Of course, it comes at a price – this is definitely a premium cooler investment. Make sure to shop around to find the best deal. But for serious adventurers and outdoor enthusiasts, the Yeti Tundra 210 is a cooler worth splurging on.
With these key facts in mind, you can decide if the Yeti Tundra 210 is the right cooler for your needs. For many campers, anglers, hunters, and weekend warriors, this rugged mid-sized workhorse is the perfect cooler and companion for all their adventures.
When it comes to keeping drinks and food cold for extended periods, Yeti coolers have become the gold standard. And one of their most popular models is the Tundra 210. With a massive 210-quart capacity, this rugged cooler can keep ice frozen for days. But before you purchase this behemoth, here are 15 key facts you need to know.
Non-Slip Feet Keep Cooler in Place
One of the most frustrating aspects of large coolers is when they slide around in your vehicle or boat. But the Tundra 210 has non-slip rubber feet that grip surfaces exceptionally well. Even during hard braking or sharp turns, this bad boy stays put.
The feet are made of durable rubber that can withstand years of use without wearing down. And they extend several inches to provide maximum traction on all types of surfaces.
So whether you’re tossing the Tundra 210 in the back of your pickup or strapping it down in your fishing boat, you can rest assured it will stay stationary throughout your journey.
Dual Locking Lid System Provides Superior Seal
To keep cold air trapped inside, a cooler needs an airtight seal. The Tundra 210 accomplishes this through its dual locking lid system. It utilizes a main gasket that runs the entire perimeter of the lid.
But it also has a secondary gasket on the hinge. This provides backup protection to prevent warm air from seeping in. Together, these robust gaskets form an impenetrable barrier that preserves ice for days on end.
The lid itself is also freezer-grade. Constructed from thick polyurethane, it’s virtually impenetrable to heat. And the latching system exerts significant downward force for maximum compression on the gaskets.
Even in scorching hot conditions, the Tundra 210’s innovative lid design maintains sub-freezing temperatures inside the cooler.
Durable Roto-Molded Construction
Yeti utilizes roto-molding to construct the Tundra 210’s body. This process involves spinning a mold as plastic resin is poured inside. The result is a continuous, seamless piece that is remarkably tough.
The exterior retains excellent impact resistance, preventing dents, cracks, and punctures. It also has great flexibility and won’t become brittle in cold temperatures.
Additionally, roto-molding allows for up to 3 inches of insulation in the walls. This superb insulation couples with the airtight lid to provide 5+ days of ice retention, even in hot conditions.
Simply put, the Tundra 210 achieves the ideal balance between sturdiness and insulation thanks to roto-molding.
Interlocking Lid Latches Provide Extra Security
To firmly press the lid against the body, the Tundra 210 utilizes industrial-strength rubber latches. Each corner of the lid has one, for a total of four.
These latches employ interlocking technology. Once closed, they cannot be opened unless you depress a button on their underside. This prevents accidental openings from people brushing against them.
The latches themselves are also oversized to exert maximum force. Rubber coatings ensure you can open them easily without injuring your hands.
With the interlocking lid latches compressed down tightly, the Tundra 210 ensures no cold air escapes and no hot air gets in.
BearProof Certification Provides Peace of Mind
Nothing can ruin an outdoor excursion quicker than having a hungry bear break into your cooler. But with its thickwalls and rugged build, the Tundra 210 is certified BearResistant by the Interagency Grizzly Bear Committee (IGBC).
To earn this certification, coolers undergo stringent testing against Grizzly Bears, which are considered the most destructive animals. The Tundra 210 withstood up to an hour of abuse before the bears gave up trying to claw and pry it open.
So whether you’re camping deep in bear country or simply want ultimate protection, the Tundra 210 fits the bill. You can rest easy knowing this cooler can thwart almost any animal attack.
Molded Tie-Down Points for Securing
With its tremendous capacity, the Tundra 210 weighs nearly 40 pounds when empty. You’ll definitely want to secure it during transport. For this purpose, the cooler features molded tie-down points on both sides.
Heavy-duty ropes or straps can be affixed to these points with carabiners or other hardware. The tie-down spots are reinforced to handle tremendous force without ripping out.
This allows you to snugly secure the Tundra 210 in pickup beds, boats, ATVs, trailers, and more. The tie-downs compress the lid for maximum insulation too.
So you get the dual benefit of keeping the cooler stationary and enhancing its ice retention capabilities.
Molded Handle for Easy Transport
Despite its mammoth capacity, the design of the Tundra 210 allows for reasonably easy transport. This is thanks to the built-in rope handle up top.
The rope handle is actually molded from the plastic resin during construction. This makes it incredibly tough and virtually unbreakable.
The handle makes it relatively easy for one person to carry the cooler short distances. For longer treks, you may want a second person or wheel the cooler using the molded side handles.
Either way, the Tundra 210 gives you serious hauling versatility not often found in massive coolers.
Dry Goods Rack Helps You Stay Organized
It’s easy for contents to get jumbled around inside a cooler, especially one as big as the Tundra 210. But the built-in dry goods rack helps you stay organized.
This rack sits towards the top, right under the lid. It provides a stable shelf to store non-perishable snacks, utensils, or other gear.
The rack has a series of slots so melted ice can drain below without pooling. And because it sits high in the cooler, you can access the contents without disturbing everything else down below.
The dry goods rack is the ideal storage spot for items you’ll be using frequently, helping you avoid the nightmare of disheveled cooler contents.
Lip Grips Make Accessing Contents Easier
Considering its size, the Tundra 210 would be extremely difficult to open if the lid was flat. But luckily, it features specialized lip grips along the front and rear edges.
These lip grips jut out several inches, providing ample space inside to grip underneath. Even someone with small hands can easily grasp and lift open the heavy lid.
The lip grips also lock into the latches when closed. This prevents warping that could compromise the seal over time.
Thanks to the smartly designed lip grips, accessing the Tundra 210’s contents is a breeze.
Fish Ruler Helps You Track Catches
For avid anglers, the Tundra 210 includes a molded 17.5-inch fish ruler along the inside. This helps you quickly measure catches before tossing them into the cooler.
The ruler contains half-inch markings so you can get accurate lengths. No more guessing if that trout or bass is a keeper!
Having the built-in fish ruler right inside the lid makes measurements extremely convenient. You don’t have to fumble around for a separate ruler.
It’s an ingenious addition that makes the Tundra 210 ideal for serious fishing trips.
Cupholders Let You Quench Your Thirst
After reeling in a big catch, there’s nothing better than celebrating with a cold drink. The Tundra 210 has built-in cupholders to serve up refreshments anywhere.
The cupholders are molded into the thick lid to accept tall glasses, cans, bottles, or even a steaming hot coffee mug.
Because they’re deep and sturdy, they can handle bounces and swerves without tipping over. Anglers, tailgaters, and other outdoor enthusiasts will appreciate the convenience.
Thanks to the cupholders, the party keeps rolling wherever the Tundra 210 goes.
Non-Marking Feet Protect Surfaces
The tough rubber feet on the base do more than just grip surfaces. They also protect against scuffs, scratches, and UV damage.
Roto-molded coolers can occasionally cause “weathering” on deck surfaces from long-term contact. But the Tundra 210’s feet are non-marking to safeguard against this.
They provide a barrier between the cooler and the ground while isolating vibrations and impacts.
So you can rest the Tundra 210 anywhere without worrying about mars, markings, or other aesthetic damage. This keeps your boat deck, porch, tailgate and other areas looking pristine.
Made in USA for Superior Quality Control
Yeti maintains strict oversight on every product made in one of their US facilities. The Tundra 210 is no exception.
It undergoes rigorous testing during and after production to ensure proper insulation, sealing, hinge operation, latch engagement and other key factors.
Being manufactured domestically allows Yeti to enact the highest quality control standards. Minor defects and flaws are identified and fixed before shipment.
Additionally, the parts sourced from US vendors are built to last with strict specifications. The end result is a cooler of remarkable quality worthy of the Yeti badge.
5-Year Warranty Backed by Excellent Customer Service
Yeti stands behind the Tundra 210 with one of the best warranties in the industry. It remains in effect for 5 years after purchase.
This encompasses defects in materials and workmanship. Should any issues arise due to faults by Yeti, they’ll repair or replace the cooler free of charge.
Yeti’s US-based customer service team is also top-notch. They gladly handle warranty claims, returns, or any other questions so you avoid frustrating automated phone trees.
Between the long warranty and helpful service department, you can buy the Tundra 210 with confidence.
The Yeti Tundra series has become the cream of the crop when it comes to heavy-duty coolers. And one of their most sought-after models is the Tundra 210. With a massive 210-quart capacity, this bad boy can keep drinks icy cold for days on end. But before taking the plunge, here are 15 vital facts about the Tundra 210 you should know.
Vortex Drain System Empties Melted Ice Faster
A major gripe with large coolers is how long they take to drain. But the engineers at Yeti addressed this with the Tundra 210’s vortex drain system. It uses a large threaded plug that unscrews to open a 3-inch wide hole.
This allows melted ice to funnel out rapidly without having to tip the cooler sideways or upside down. The wide drain opening and steep interior slope combine to suck water out almost like a vortex.
Even after a multi-day camping trip or boating excursion, you can empty the Tundra 210 and get it prepped for the next journey in minutes.
Quad Rubber Corner Guards Absorb Impacts
Despite the Tundra 210’s rugged construction, Yeti still equipped it with additional protection. Thick rubber corner guards sit on the lower corners of the cooler.
These absorb impacts and bumps, preventing cracks or fractures in the body. They also provide traction on the corners to reduce sliding.
The rubber guards are removable should they become damaged. But their durable construction allows them to withstand years of hard use.
With the corner guards, you can haul the Tundra 210 anywhere without worrying about structural damage.
Industrial-Strength Hinges Won’t Fail
Opening and closing a cooler repeatedly places huge strain on the hinges. That’s why Yeti installs heavy-duty hinges on the Tundra 210.
They employ a single thick pin and arm on each side. The robust design prevents loosening or premature breakdowns.
The hinge material maintains flexibility even when frozen. And adjustable tension lets you increase resistance if desired.
You can open and shut the lid thousands of times without fail thanks to the indestructible hinges.
Non-Slip Lip Grips Stay Secure in Your Hands
Trying to lift a heavy, slippery cooler lid can quickly lead to accidents. But the Tundra 210 has special lip grips along the front and rear edges to prevent this.
These lip grips have a stubby, non-slip texture that provides extra grip. Even with wet or icy hands, you can easily grasp and open the lid.
The grips extend several inches, giving ample room for fingers to fit underneath. And their inward slope lets you lift upward comfortably.
The thoughtful design of the lip grips keeps hands safe and secure when accessing the Tundra’s contents.
AnchorPoint Tie-Downs Make Securing a Breeze
With a tare weight nearing 40 pounds, properly securing the Tundra 210 during transport is a must. For this purpose, it has molded AnchorPoint tie-downs on each side.
These allow easy attachment of ropes or straps to lock the cooler tightly in place. The tie-downs are reinforced to handle tremendous force as well.
Spending a few minutes to strap down the Tundra 210 well provides peace of mind that it won’t budge an inch during your travels.
The AnchorPoints also make securing the cooler lid extra simple for maximum ice retention.
ColdCell Insulation Retains Ice for Days
At the heart of the Tundra 210’s stellar performance is its ColdCell foam insulation. This proprietary closed-cell foam offers up to 3 inches of thickness in the walls.
The dense, injected foam minimizes air pockets. This results in excellent thermal conductivity to block heat transfer extremely well.
The extra-thick insulation allows ice to stay frozen for 5-6 days, even in hot conditions. Drinks and food remain chilled at safe temperatures too.
With ColdCell insulation, the Tundra 210 sets the bar for ice retention in spacious heavy-duty coolers.
YETI Vortex Drain Plug for Quick Water Removal
Nothing’s worse than having to tilt and wrestle with a heavy cooler to empty leftover melted ice. The Tundra 210 avoids this headache with its Vortex drain plug.
Just unscrew the large threaded plug, and water starts rapidly funneling out through the 3-inch opening. The steep interior slope speeds up draining as well.
In just a minute or two, all the remaining liquid will be emptied without ever having to lift or tip the cooler.
It’s a game-changing drain design that makes post-trip cleanup a total breeze.
T-Rex Lid Latches Clamp Down Like a Prehistoric Beast
Living up to its T-Rex moniker, the lid latches on the Tundra 210 bite down with incredible force. The rubber latches utilize thick pivoting arms and grabber hooks for tremendous strength.
They’re engineered to compress the lid against the large gasket tightly. Even in sweltering conditions, warm air cannot sneak in.
The latches lock until you depress a button on their underside for extra security. And adjustable tension lets you tweak clamping force.
With the T-Rex lid latches doing their job, the airtight seal on the Tundra 210 is virtually unbreakable.
Heavy-Duty Rope Handles Make Carrying Manageable
Thanks to integrated rope handles, transporting the empty Tundra 210 is reasonably doable for one person. Molded recesses allow the rope handles to sit nearly flush with the lid perimeter when not in use.
The rope handles utilize high-strength climbing rope wrapped in textured TPU for comfort and grip. Large knots on the underside prevent any slippage.
For moving the Tundra 210 longer distances, you may want two people or a wheel kit. But the rope handles are great for quick short-range transport.
FatWall Design Maximizes Ice Retention
With its roto-molded construction, the Tundra 210 features up to 3 inches of plastic thickness in the walls and lid. This FatWall design is integral for long-lasting insulation.
The added wall thickness allows more room for dense foam insulation. It also provides exceptional rigidity and impact resistance.
Together with the freezer-grade gasket, the FatWalls create an impenetrable barrier that locks in sub-freezing air.
The extra-thick walls are the key to the Tundra 210’s multi-day ice retention capabilities in harsh conditions.
Non-Slip Feet Grip Surfaces Tight
Few things are more annoying than a heavy cooler sliding around uncontrollably in your vehicle or boat. Luckily the Tundra 210 combats this with rubber non-slip feet.
They keep the cooler anchored tightly to the ground, preventing shifts during hard braking or swerves. The high-traction feet conform to uneven surfaces as well.
Despite miles of travel over rough terrain, you can expect the Tundra 210 to stay firmly planted wherever you put it.
InterLock Lid System Creates Impenetrable Seal
Maintaining sub-freezing temperatures demands an airtight lid seal. For this, Yeti equipped the Tundra 210 with its patented InterLock Lid System.
It uses a full-length freezer-grade gasket to seal the perimeter. But it also employs a smaller gasket on the hinge side for extra protection.
The dual-gasket design eliminates any gaps or weak points for air intrusion. It creates an impenetrable barrier locking in the cold.
Even when opened frequently, the InterLock system prevents the interior temperature from creeping up.
Dry Goods Rack Keeps Items Organized
The cavernous interior of the Tundra 210 demands some way to keep items organized. For that purpose, a dry goods rack sits toward the top under the lid.
This rack has a series of molded slots that serve as shelves to store non-perishables and other supplies off the floor.
You can quickly grab frequently used items from the rack without having to dig around inside. And the elevated design allows water drainage underneath.
The rack brings welcome organization to maximize the Tundra 210’s massive storage potential.
Made in USA for Stringent Quality Control
Yeti maintains tight oversight on manufacturing done at its facilities in the USA. This allows rigorous defect inspection for all products like the Tundra 210.
Each cooler undergoes function and durability testing during and after production. This ensures optimal sealing, gasket adhesion, hinge operation, and more.
By adhering to strict quality control, Yeti delivers exceptional craftsmanship and reliability with the Tundra 210.
5-Year Warranty Protection Provides Peace of Mind
Yeti stands firmly behind the Tundra 210 with one of the cooler industry’s best warranties at 5 years.
This covers any defects in materials or workmanship. If a problem arises due to an error on Yeti’s part, they will repair or replace your Tundra 210 free of charge.
Combine the great warranty with Yeti’s renowned customer service, and you can purchase the Tundra 210 worry-free.
When you need tons of portable refrigeration, the Yeti Tundra 210 is a top choice. With a whopping 210-quart capacity, this rugged cooler can handle any adventure. But before you make the investment, check out these 15 essential facts about the Tundra 210.
Dry Goods Basket Helps Organize Gear
It’s easy for items to become disorganized inside a massive 210-quart cooler. But Yeti equipped the Tundra 210 with a dry goods basket to prevent jumbled messes.
This molded plastic basket sits toward the top, right under the lid. It provides organized storage for non-perishable items you’ll need to access frequently.
The basket features slatted cutouts so water can drain below after ice melts. And it has an integrated handle for easy transport.
With the dry goods basket, you’ll never have to dig haphazardly through the Tundra 210 again trying to find a snack or utensil.
Rotomolded Construction Is Virtually Indestructible
To build the Tundra 210, Yeti employs advanced rotomolding technology. This involves pouring plastic resin into a spinning mold to coat the interior.
The result is a seamless, continuous piece that has incredible impact toughness and flexibility. It can withstand dings, cracks, and punctures that would ruin lesser coolers.
Rotomolding also allows up to 3 inches of insulation thickness in the walls. This gives the Tundra 210 superior ice retention.
With its durable build and ample insulation, the rotomolded Tundra 210 is a true workhorse for the toughest conditions.
NeverWet Coating Sheds Water With Ease
Even the most durable coolers can eventually show staining and weathering from long-term water exposure. But the Tundra 210 combats this with a NeverWet coating.
NeverWet repels water incredibly well, causing it to bead and roll right off the exterior. This prevents pooling and moisture buildup that leads to mold or discoloration.
The advanced hydrophobic coating also resists mud, snow, and even blood. You can hose the Tundra 210 clean easily.
Thanks to NeverWet, the Tundra 210 will maintain its pristine visual appeal year after year.
Molded Z-Haul Handles Make Transport a Breeze
Moving a hulking 210-quart cooler is no easy task. But the Tundra 210’s molded handles allow two people to transport it reasonably well.
Horizontally-oriented Z-Haul handles sit recessed into the front and rear walls. They provide great grip and support from multiple angles.
The handles are molded directly into the plastic for incredible toughness. And their wide design avoids pinched fingers.
With a friend’s help, the Z-Haul handles let you comfortably haul the loaded Tundra 210 for short distances.
Non-Slip Lid Latches Keep Cooler Securely Closed
To generate max force for an airtight seal, the Tundra 210 uses rubberized latch handles with textured grips. This allows you to clamp the lid down tightly without slippage.
The latch handles employ a mechanism that stops them from opening unless you press a button first. So they won’t pop open accidentally from bumps or brushes.
Adjustable tension on the latches also lets you customize the compression force on the gasketed lid.
The secure latch system guarantees no cold air escapes and no hot air sneaks into the Tundra’s mammoth chamber.
Dual-Sided Threaded Drain Plug for Fast Water Removal
Draining leftover water from a 210-quart cooler can be tedious and messy. But the Tundra 210 simplifies it with a dual-sided drain plug.
Just unscrew the large threaded plug from either the front or back. This opens up a 3-inch diameter hole for water to rapidly evacuate through.
There’s no need to ever tilt or maneuver the heavy cooler. The wide drain and sloped floor whisk water out in mere minutes.
Post-adventure cleanup is quick and painless thanks to this innovative drain design.
ColdLock Gasket Forms an Impermeable Barrier
Creating an airtight seal is imperative for maximum ice retention. For this, the Tundra 210 employs Yeti’s proprietary ColdLock gasket in the lid.
The flexible gasket extends the entire perimeter, seamlessly conforming to the body upon closing. The ColdLock material resists cracking in freezing temps.
Under pressure from the latches, the gasket presses tightly against the cooler body. This eliminates gaps where air could seep through.
The ColdLock gasket is vital for maintaining ice for 5+ days, even in scorching conditions.
BearFoot Non-Marking Feet Protect Surfaces
The Tundra 210’s sizable rubber feet serve a dual purpose. They keep the cooler anchored in place while also preventing surface scuffs and marks.
The feet lift the cooler off the ground slightly to isolate it from shocks and vibrations during transport. This also allows water drainage underneath.
The high-traction material won’t stain or scratch deck surfaces like some coolers are prone to doing over time.
You can rest assured placing the Tundra 210 anywhere without damage thanks to the BearFoot feet.
Heavy-Duty Molded Tie-Down Points for Security
With a 210-quart capacity, you’ll definitely want to secure the Tundra during transport. For that purpose, it features molded tie-down points on the rear and sides.
These allow easy attachment of straps or ropes to lock the Tundra 210 tightly in place. The tie-down points have thick reinforcement walls as well.
Taking a few minutes to strap down the cooler provides serious peace of mind that it won’t shift during your travels.
LipGrip Handles Allow Easy Opening
Accessing the Tundra 210’s cavernous interior would be nearly impossible if the lid sat flush with the rim. But LipGrip handles along the front and rear edges solve that.
The LipGrip handles stick out several inches, providing ample space to slide fingers underneath and lift up. Their grippy texture prevents slipping.
These smartly designed handles take the struggle and frustration out of opening a hulking 210-quart cooler lid.
Fish Ruler Under Lid Tracks Catches
Serious anglers will appreciate the molded 17.5-inch fish ruler on the underside of the lid. This provides quick and easy measurements of your catches.
The ruler has half-inch markings so you can immediately tell if that lunker is a keeper. No more fumbling for a separate measuring device.
The built-in fish ruler helps you quickly tag your catches before tossing them in the cooler to stay fresh.
Yeti 5-Year Warranty for Peace of Mind
Yeti offers outstanding protection on all its coolers with a 5-year limited warranty. That coverage includes the Tundra 210 as well.
If any component fails prematurely due to a defect, Yeti will repair or replace your cooler free of charge. Their customer service team makes submitting claims hassle-free too.
With one of the best warranties in the cooler industry, you can buy the Tundra 210 with confidence.
Dry Goods Rack for Organized Storage
The cavernous interior of a 210-quart cooler can quickly become messy without organization. For that purpose, the Tundra 210 includes a dry goods rack under the lid.
This rack provides a stable platform perfect for storing food, drinks, utensils and other non-perishable items you’ll need access to.
The elevated design allows you to grab items quickly without rummaging through the ice below. Drainage slots prevent pooling too.
The handy dry goods rack brings order to mammoth coolers like the Tundra 210.
Rotomolded Construction for Superior Toughness
To construct the Tundra 210’s rugged exterior shell, Yeti employs an advanced rotomolding fabrication process.
This involves pouring liquid plastic resin into a spinning hollow mold. As the mold turns, the plastic spreads and coats the entire interior.
The result is a continuous, one-piece shell that has incredible impact durability and flex strength. It also allows for thicker insulation walls.
With rotomolding, the Tundra 210 achieves the ideal balance of toughness and top-notch insulation.
Recessed Corner Mounts for Rod Holsters
The Tundra 210 caters to serious anglers with molded recesses in the rear corners for vertical rod holsters.
Popular accessories like the YakAttack VisiCarbon Pro slide right into these recessed pockets. This provides protected storage for up to 4 fishing rods.
The rod holders keep your rigs organized and secured vertically along the backside while freeing up interior capacity.
It’s a clever addition that makes the Tundra 210 one of the best coolers for avid fishermen and women.
With a massive 210-quart capacity, the Yeti Tundra 210 is built for hauling tons of drinks and food on any adventure. But before you make this hefty investment, check out these 15 key facts about the Tundra 210.
AnchorPoint Tie-Down Slots for Securing on Boats or Trucks
Due to its tremendous size and weight, properly securing the Tundra 210 during transport is crucial. For that purpose, it features AnchorPoint tie-down slots on the rear corners.
These molded slots allow easy attachment of ropes or straps to lock the Tundra 210 tightly in place. The AnchorPoints are reinforced to handle extreme force as well.
Taking a few minutes to strap this beast down provides serious peace of mind that it won’t budge while hauling on boats, trucks, trailers and more.
Rotomolded Construction for Superior Durability
Yeti uses an advanced rotomolding process to fabricate the Tundra 210’s rugged exterior shell. This involves pouring liquid plastic into a constantly rotating hollow mold.
As the mold turns, the plastic spreads and coats the entire interior surface. The end product is a seamless, continuous piece with excellent impact strength.
Rotomolding also allows up to 3 inches of plastic thickness for enhanced insulation. The Tundra 210 is built to handle years of hard use.
InterLock Lid System Prevents Air Leaks
To retain ice for days on end, an airtight seal is mandatory. The Tundra 210 achieves this with Yeti’s patented InterLock Lid System.
It employs a full-length freezer-quality gasket to seal the perimeter. But it also uses a smaller gasket on the hinge side for extra protection.
Together, these gaskets eliminate any gaps or weak points where air could sneak in. The InterLock system locks in the cold superbly.
ColdCell Insulation Blends Airflow Disruption and Thickness
At the core of the Tundra 210’s exceptional ice retention is two inches of ColdCell foam insulation. This proprietary closed-cell foam provides top-notch thermal conductivity.
The dense structure minimizes air pockets while the expanded thickness allows for maximum cold air entrapment. ColdCell insulation really brings the chill.
It outperforms standard cooler insulation, allowing 5+ days of ice retention – even in blistering hot weather.
Dual Molded-In Haul Handles For Heavy Lifting
Moving a 210-quart juggernaut around requires some big help. For that purpose, the Tundra 210 features molded-in handles on the sides.
Positioned horizontally, these handles allow two people to carry the loaded cooler reasonably well for short distances.
The handles sit recessed when not in use, but provide great grip and support from multiple angles when transporting this beast.
With the help of a friend and the molded haul handles, you can move the Tundra 210 wherever your epic adventures lead.
LipGrips Give You Leverage to Open The Hefty Lid
Trying to open a bulky 210-quart cooler lid that sits flush with the body would be nearly impossible. But the Tundra 210 wisely employs LipGrips for this task.
The LipGrips along the front and rear edges stick out several inches. This provides ample space to slide fingers underneath and lift up using leverage.
The textured material enables a secure, no-slip grip, even when wet. The LipGrips make accessing the mammoth storage chamber a breeze.
NeverWet Coating Sheds Water For a Like-New Look
Yeti coats the exterior of the Tundra 210 with a NeverWet hydrophobic treatment. This prevents water staining and buildup that can lead to mold and discoloration.
NeverWet makes water bead up and roll right off the surface. This keeps the Tundra 210 looking pristine year after year even with heavy use.
The coating also resists mud, snow and grime, allowing easy cleanup. You’ll think it just came out of the box.
ThickWall Design Adds Insulation and Rigidity
With its roto-molded construction, the Tundra 210 boasts up to 3 inches of plastic thickness in the walls and lid. This ThickWall design provides two major benefits.
Firstly, it allows more insulation material to be injected for improved cold retention. Secondly, it makes the cooler incredibly rigid and impact-resistant.
The ThickWalls create an ideal balance – exceptional insulation paired with extreme toughness.
Vortex Drain System Whisks Away Excess Water
Dealing with draining a 210-quart cooler after a multi-day trip can be tedious. But the Tundra 210’s vortex drain system speeds up the task tremendously.
Just unscrew the large threaded drain plug, and water starts rapidly evacuating through the massive 3-inch opening.
The sloped floor accelerates drainage as well. In just minutes, you can empty out all the excess liquid with zero flipping, tilting or mess.
YETI 5-Year Warranty for Peace of Mind
Yeti stands firmly behind the Tundra 210 and all its coolers with a thorough 5-year limited warranty.
This covers any premature defects or issues due to faulty manufacturing. If something goes awry, Yeti will repair or replace your Tundra 210 free of charge.
With one of the best warranties in the industry, you can purchase the Tundra 210 knowing you’re covered.
T-Rex Lid Latches Clamp Down Like a Prehistoric Beast
Living up to their T-Rex name, the rubber latches on the Tundra 210 bite down with tremendous force to achieve an airtight seal.
The latches utilize thick industrial-grade rubber and oversized pivot arms to maximize compression on the lid and its gaskets.
Once closed, the latches interlock for added security. Adjustable tension also lets you tweak the clamping force as needed.
Thanks to the T-Rex lid latches, the Tundra 210 keeps cold air securely inside for days on end.
Fish Ruler Under Lid Lets You Quickly Measure Catches
For avid anglers, the Tundra 210 comes with a molded 17.5-inch fish ruler right inside the underside of the lid.
This allows quick and easy measurement of fish before adding them to the cooler. No need to fumble around for a separate measuring tool!
The integrated ruler can help you quickly determine whether that trophy trout or bass is a legal keeper.
It’s a thoughtful addition that makes the Tundra 210 one of the best coolers for serious fishing expeditions.
Heavy-Duty Rubber Latches Keep The Lid Securely Sealed
To ensure the gasket forms an impermeable barrier, the Tundra 210 employs heavy-duty rubber latches on each corner.
The latches utilize textured, non-slip surfaces for easy opening and closing. But their thick rubber construction exerts major downward force.
Adjustable tension settings let you customize the compression levels as well. The secure latches guarantee zero cold air escapes.
When it comes to keeping food and drinks cold, few coolers have the reputation and popularity of the Yeti Tundra. This rugged and durable cooler is beloved by outdoor enthusiasts for its ability to keep contents icy cold for days on end. But with several sizes to choose from, it can be tough to know which Tundra is right for you. If you need a cooler that can hold enough beers, water bottles and snacks for a weekend camping trip or day out on the boat, the Yeti Tundra 210 is likely your best bet.
Here are 15 key facts to know about the Yeti Tundra 210 cooler before you buy:
BearProof when Locked with Separately Sold Locks
1. Holds up to 210 cans with a 2:1 ice-to-content ratio – With an interior volume of over 16 gallons, the Tundra 210 has ample room for food and drinks for a weekend adventure. Yeti says it can hold up to 210 cans with a recommended 2:1 ice-to-content ratio.
2. Dimensions are 33.5 x 18.5 x 18.25 inches – At nearly three feet long and a foot and a half wide, the 210 has a large footprint that may be too big for some uses. Make sure you have enough space in your vehicle or boat before purchasing.
3. Weighs 32 lbs empty – This is not a lightweight cooler, even when empty. Lifting and carrying the 210 when fully loaded will take some muscle.
4. Rotomolded construction is virtually indestructible – Like all Yeti hard coolers, the Tundra 210 is made from heavy-duty polyethylene plastic via a rotomolding process. This makes it extremely tough and impact-resistant.
5. BearProof when used with separately sold locks – The Tundra 210 is certified BearResistant when used with Yeti’s BearProof Locks. These beefy locks attach to the stainless steel pin hinges to keep bears and other critters out of your food.
6. Keeps ice up to 10 days – With max ice retention of 10 days, you can load the 210 up on Friday and still have ice come Monday with the right conditions.
7. Has stainless steel hardware for durability – Exposed hardware like hinges and latches are often failure points on lesser coolers. Yeti uses marine-grade stainless steel to ensure it lasts for years.
8. Dry goods basket keeps items off wet ice – A removable plastic dry goods basket helps you keep food organized and prevents sogginess.
9. Features rubber latches that won’t break – Durable rubber T-Rex latches are nearly indestructible and hold the lid tightly sealed.
10. Non-slip rubber feet keep cooler in place – To prevent sliding around in the bed of your truck, the 210 has non-marking rubber feet.
11. Comes in white or tan – The Tundra 210 is available in Yeti’s classic white color or an earthy tan more suited for hunting use.
12. Five-year warranty protects against defects – Yeti offers a generous five-year warranty against manufacturing defects, so you can buy with confidence.
13. Made in the USA – From materials sourced globally, Yeti designs, engineers, and manufactures the Tundra coolers in the United States.
14. Costs around $350 – With its premium construction and materials, expect to pay a premium price of around $350 for the Yeti Tundra 210 cooler.
15. Ideal for weekend camping trips and boat outings – With its large capacity and long ice retention, the 210 is perfect for keeping food and drinks cold and refreshing for 2-4 people on weekend adventures.
When you need a cooler that can handle the abuse of the outdoors while keeping a weekend’s worth of contents cold, the Yeti Tundra 210 is a top choice. Its robust rotomolded construction and long insulation performance make it worth the investment for avid adventurers and outdoor enthusiasts.
For outdoor enthusiasts who need serious cooling power for their weekend adventures, few can match the reputation and performance of the Yeti Tundra coolers. The medium-sized Yeti Tundra 210 is a rugged and versatile choice for camping trips, boating days, and tailgates where you need to keep food and drinks icy cold. Before you purchase this popular cooler, read on to learn the key facts you need to know.
Hassle-Free 3 Year Warranty from Yeti
First up, let’s look at why the Tundra 210 is built to last. This cooler features rotomolded construction, which is a fancy way to say it’s made from heavy-duty polyethylene plastic formed in a spinning mold. This gives it nearly indestructible toughness and impact resistance. You can load the 210 with ice and provisions, strap it in the bed of your truck, and hit the bumpiest backroads without worrying about damage. The Tundra 210 is even certified BearProof when you use Yeti’s separately sold lock attachments designed for these burly coolers.
In addition to tough materials, the 210 won’t let you down thanks to features like a freezer-quality gasket, rugged rubber latches, and stainless steel hardware. The Tundra 210 comes with Yeti’s hassle-free 3 year warranty, so you can confidently buy one knowing defects in materials or workmanship are covered.
Okay, so we know this cooler is built Ford-tough. But what kind of performance can you expect? Well, Yeti claims you can load the 210 up with ice and it will keep contents chilled for up to 10 straight days, even in hot conditions. That’s pretty incredible given the size and affordable price. A removable dry goods basket helps you keep items organized and prevents sogginess.
When it comes to capacity, Yeti says the 210 can hold around 20 bags of ice and 210 cans with a recommended 2:1 ice-to-content ratio. That means you can pack enough cold drinks and snacks for 4 people on a long weekend camping trip or days out fishing on the boat. And unlike cheap disposable coolers, the 210 has the insulation performance for repeated multi-day use trip after trip.
Now let’s talk dimensions. The Tundra 210 measures 33.5 inches long by 18.5 inches wide by 18.25 inches high. With a dry weight of 32 lbs, it’s certainly not lightweight or compact. Make sure you have adequate space in your vehicle or boat before purchasing. The 210 comes with non-slip rubber feet that help keep it stable in the back of trucks. It’s also available in classic white or an earthy desert tan color.
As you’d expect with a premium cooler made in America, the Yeti Tundra 210 costs a pretty penny at around $350. That’s a serious investment, but worth it for avid adventurers who want cooling performance they can count on. Lesser coolers may save you money up front, but won’t deliver anywhere close to 10 days of ice retention.
The Tundra 210 strikes a nice balance between packability and holding ample food/drinks for a medium-sized group. It’s not as massive as the mammoth Tundra 350, but offers way more capacity than the versatile but compact Roadie series. Overall, it’s an ideal size for most weekenders and outdoor enthusiasts.
In summary, here are 15 key facts on the Yeti Tundra 210 cooler:
1. Rotomolded construction is virtually indestructible
2. Holds up to 210 cans with 2:1 ice ratio
3. Dimensions of 33.5 x 18.5 x 18.25 inches
4. Weighs 32 pounds empty
5. Keeps ice up to 10 days
6. Has stainless steel hardware
7. Includes dry goods basket
8. Durable rubber T-Rex latches
9. Non-slip rubber feet
10. Available in white or tan
11. Comes with 3 year warranty
12. Made in America
13. Costs around $350
14. Great for weekends away
15. Certified BearProof when locked
If you need a cooler that can handle serious outdoor use while keeping a sizable quantity of food and drinks cold for days on end, the Yeti Tundra 210 is a stellar choice. It may cost you a bit more up front, but the unmatched insulation performance and bombproof design make it worth the money for avid adventurers.
When you need a rugged, high-performance cooler for weekend adventures, few match the reputation of Yeti. The medium-sized Yeti Tundra 210 cooler is a popular choice among outdoor lovers for its superior ice retention and nearly indestructible build.
Before you invest in the Tundra 210, read this guide to learn 15 must-know facts about one of the best coolers money can buy.
Variety of Custom Color Options Available
Unlike cheap disposable coolers, the Yeti Tundra 210 is built for years of outdoor use thanks to robust rotomolded construction. This patented process uses polyethylene plastic molded in a spinning chamber to create a cooler body of exceptional thickness and durability.
The Tundra 210 is even certified BearResistant when used with Yeti’s heavy-duty lock attachments. Bears won’t be stealing your food, even if they manage to steal the whole cooler! Of course, the 210 is also perfect for keeping drinks icy cold at the big game, camping trip or day out fishing with your buddies.
In addition to tough build materials, the 210 won’t disappoint thanks to commercial-grade insulation, a freezer-quality gasket, sturdy rubber latches and stainless steel hardware. It’s backed by Yeti’s 3 year hassle-free warranty in case you get a lemon.
Many cheap coolers may keep ice 1-2 days at best. But the Tundra 210 is built to retain ice for 5-10 days, even in hot conditions. It comes with a basket to organize and prevent soggy food.
You can customize your Tundra 210 with a variety of color options. It comes standard in classic white or desert tan, but you can also pay extra to accessorize it with custom colors from Yeti’s Color Solution lineup. Everything from pastel teal to blaze orange is available.
At 33.5″ long x 18.5″ wide x 18.25″ high, the 210 is sizable but not gigantic. Yeti says it holds an impressive 210 cans with a 2:1 ice-to-content ratio. That’s ample space for a 4 person weekend trip.
Even empty, the 210 is not lightweight at 32 lbs. Make sure your vehicle has room to transport it. The non-slip rubber feet help keep it stable once loaded.
As expected, this premium cooler comes at a premium price of around $350. Yes, you can find cheaper coolers but they won’t offer anywhere close to the same insulation performance and bulletproof exterior.
Compared to the massive Tundra 350, the 210 strikes a nice balance of packable size while still offering serious capacity. It’s too large for true portability, but ideal for campouts, boating and hunting trips, tailgates and more.
To quickly recap, here are 15 vital facts on the Yeti Tundra 210 cooler:
1. Virtually indestructible rotomolded build
2. Holds 210 cans with 2:1 ice ratio
3. Dimensions of 33.5 x 18.5 x 18.25 inches
4. 32 pound empty weight
5. Keeps ice 5-10+ days
6. Stainless steel hardware
7. Removable dry goods basket
8. Heavy duty rubber latches
9. Non-slip rubber feet
10. Custom color options available
11. 3 year warranty
12. Made in America
13. Around $350 price tag
14. Ideal capacity for weekends away
15. Certified BearProof
If you need exceptional ice retention and ruggedness for your next off-grid adventure, the Yeti Tundra 210 will deliver. It’s worth the premium price for serious outdoor enthusiasts who expect the best.
When you need serious cooling capability for camping, boating, hunting and other outdoor fun, Yeti is the premium brand outdoor enthusiasts turn to. The rugged Yeti Tundra cooler series sets the standard for ice retention, and the mid-sized 210 quart is perfect for weekend trips.
Read on below for 15 must-know facts about the wildly popular Yeti Tundra 210 before you buy.
Made in the USA – Built for the Wilderness
Yeti’s coolers are not cheap – but you certainly get what you pay for. The Tundra 210 is roto-molded, meaning it’s constructed from a durable polyethylene plastic formed in a spinning mold. This makes an exceptionally thick and impact-resistant exterior.
The Tundra 210 can withstand bumpy dirt roads, being strapped to truck beds, and even an encounter with a grizzly bear. When used with Yeti’s heavy-duty lock add-ons, it’s certified BearProof to protect your food on adventures.
In addition to tough materials, the 210 delivers top notch insulation thanks to up to 3 inches of pressure-injected commercial grade polyurethane foam. A freezer-style gasket seals the cold. It’s built to retain ice 5-10+ days, allowing you to load up on Friday and still have icy cold drinks come Monday.
The 210 quart capacity equates to around 18-20 bags of ice with a recommended 2:1 ice-to-contents ratio. That leaves ample room for food, drinks and bait for 4 people. A dry goods basket keeps items dry.
With dimensions of 33.5” long x 18.5” wide x 18.25” high, the 210 has a large footprint. At 32 pounds empty, it’s no featherweight either. Make sure your vehicle has space before purchasing.
As you’d expect for a premium product, the Tundra 210 comes at a premium price of around $350. More affordable coolers exist, but none match Yeti’s bombproof build and insulation.
The 210 hits a nice sweet spot between the mammoth Tundra 350 and smaller Roadie models. It excels for weekends away while still fitting in most trucks, boats and SUVs.
Here is a condensed list of 15 vital facts on the Yeti Tundra 210:
1. Virtually indestructible roto-molded build
2. Holds 210 cans with 2:1 ice ratio
3. 33.5” long x 18.5” wide x 18.25” high
4. 32 pound empty weight
5. Keeps ice 5-10+ days
6. Stainless steel hardware
7. Removable dry goods basket
8. Durable rubber latches
9. Non-slip rubber feet
10. Custom color options available
11. 3 year hassle-free warranty
12. Made in America
13. Around $350 price tag
14. Great for weekends away
15. Certified BearProof
If you need a cooler tough enough for the rigors of the great outdoors while keeping contents ice-cold for days, the Yeti Tundra 210 is for you. It demands a premium price, but delivers premium performance to match.
When you need a cooler that can keep ice frozen and drinks frosty for days on end, Yeti is the top choice amongst outdoor enthusiasts. The rugged Yeti Tundra series sets the bar for ice retention, and the 210 quart size is ideal for camping, fishing, and weekend trips.
Before you invest in a Tundra 210, read this guide to 15 vital facts you should know about this beloved cooler.
Priced Under $350 Makes It Accessible for Most Budgets
Unlike flimsy discount cooler brands, the Yeti Tundra 210 is built for years of outdoor abuse. It features roto-molded construction from durable polyethylene plastic molded in a spinning chamber under pressure. This makes an exceptionally tough exterior.
The Tundra 210 is certified BearResistant by the Interagency Grizzly Bear Committee when used with Yeti’s lock accessories. You don’t have to worry about a bear breaking in and stealing your food.
But it’s not just rugged – the 210 is also a cooling beast thanks to commercial grade insulation and a freezer-style gasket. It can retain ice for 5-10+ days, keeping contents icy even on extended trips off the grid.
The 210 quart capacity provides ample space for 18-20 bags of ice with a 2:1 ice-to-content ratio recommended. That leaves room for food, drinks, bait and more for 4 people for several days away.
At 33.5 inches long by 18.5 inches wide by 18.25 inches high, the 210 has a large footprint. It also weighs a substantial 32 pounds when empty. Make sure you have room for it before buying.
For a premium cooler hand-built in America, the Yeti Tundra 210 is priced very competitively at around $350. Lesser coolers may cost less but won’t match its insulation and indestructible exterior.
Compared to smaller Roadies or the massive Tundra 350, the 210 hits a nice balance for most weekend adventure needs for 4 or less people.
Here are 15 key need-to-know facts on the Tundra 210:
1. Virtually indestructible rotomolded build
2. 210 cans capacity with 2:1 ice ratio
3. 33.5” long x 18.5” wide x 18.25” high
4. Weighs 32 pounds empty
5. Ice retention 5-10+ days
6. Stainless steel hardware
7. Removable dry goods basket
8. Durable rubber latches
9. Non-slip rubber feet
10. Custom color options
11. 3 year hassle-free warranty
12. Made in America
13. Priced under $350
14. Great for weekend trips
15. Certified BearProof
If you want a rugged cooler built for the rigors of the great outdoors with insulation to match, the Yeti Tundra 210 deserves your consideration. It commands a premium price but delivers premium performance.