An Innovative Design That Promises Better Alignment
As an avid golfer, I’m always on the lookout for ways to improve my game. Shaving strokes off my score doesn’t come easy, so when I hear about a new piece of equipment that could give me an edge, I pay attention. Recently I came across the double bend putter shaft, and let me tell you – this thing looks like a game changer!
If you’ve ever struggled with consistent putting, you know how frustrating it can be. Even when you read the break just right and hit the ball cleanly, a misaligned putter face can still send your ball off line. I’ve lost track of how many short putts I’ve missed because my putter face was even slightly open or closed at impact. And don’t even get me started on how often I misjudge the speed!
That’s why I’m so intrigued by the double bend putter shaft. With its innovative dual bend design, it promotes better alignment and square contact by counterbalancing the putter head. Let me walk you through how it works…
First, picture your typical single bend putter shaft. The bend occurs right near the hosel, allowing your hands to hang vertically while keeping the shaft angle pointing at the target. But with this traditional bend, it’s easy for your hands and the putter head to get out of sync during the stroke, leading to misalignment.
Now imagine that shaft with a second bend occurring right below the grip. By adding this extra “kink,” the double bend shaft brings your hands and the putter head into better harmony. Your hands stay more under the shaft angle through impact, minimizing face rotation and keeping things online.
The other benefit is that double bent shaft promotes a more upright posture at address. This takes stress off your back while giving you better leverage and feel over the ball. Plus, it stops your hands from releasing too early on short putts – eliminating those embarrassing 3-footers blown past the hole!
As soon as I heard about the enhanced alignment and improved consistency this innovative shaft offers, I knew I had to give it a try. And let me tell you, the performance has lived up to the hype so far.
Previously, I struggled with my putting stroke getting too “wristy” on longer putts. My hands would take over, causing me to push or pull the ball off line. But with the double bend keeping everything in harmony, my stroke feels much more stable and under control. The face stays online longer through impact, greatly minimizing those fat and thin mishits.
I’m also draining a lot more short putts thanks to the double bend shaft. By preventing my hands from releasing too early, I now have better speed control on putts inside 10 feet. The improved alignment has given me renewed confidence over those tricky 3 to 4 footers too.
While experimenting with the double bend, I’ve tested it with different putter heads – including blade and mallet styles. My initial testing has shown this innovative shaft pairs well with blade putters in particular.
By allowing a more upright posture, the double bend seems to better complement the clean aesthetics of a traditional blade. And I’ve found the counterbalancing effect has an even greater impact on the smaller blade profile. My stroke with a blade putter and double bend shaft feels like a pendulum swinging smoothly back and forth – promoting a consistent impact and better roll.
Speaking of roll, the dual bends in this shaft have another benefit – improved energy transfer. By keeping the face square longer with less twisting, more of your stroke energy goes directly into forward motion. I’ve been blown away by the speeds and distances I’m getting on long lag putts with the double bend shaft. Better energy transfer equals better momentum equals more made putts!
The only downside I’ve noticed is the double bend seems to slightly reduce launch angle, making the ball come out a bit lower off the face. But faster rollout from the improved energy transfer more than makes up for this. And I’ll gladly trade a degree or two of launch for the added consistency any day!
For any golfer frustrated with their putting, I couldn’t recommend trying the double bend shaft enough. The unique dual bend design delivers on its promises for improved alignment, better feel, and more consistent speed. Don’t be surprised if you see more and more tour pros gaming this innovative shaft in the coming months!
While it may look slightly unusual at first, the performance benefits can’t be denied. If you’re looking for an easy way to potentially shave strokes off your scores this season, introducing the double bend into your setup could be a great call. It’s certainly taken my putting to the next level – and it could very well do the same for your game too!
Counterbalances The Putter Head For A Purer Stroke
If you’re like me, consistency on the greens doesn’t come easy. I’ve spent years trying to perfect my putting stroke, but those slight mishits still creep in to throw me off line. But ever since discovering the ingenious double bend putter shaft, I finally feel like I’ve unlocked a purer, more repeatable stroke.
Here’s the deal – traditional single bend shafts often allow too much disconnect between your hands and the putter head. When this harmony gets thrown off, even by a few degrees, inconsistency rears its ugly head. Minor discrepancies in angles lead to misaligned strokes, causing pushes, pulls and lips-outs.
By introducing a second bend near the grip, the double bend shaft brings your hands and the putter head into better sync. This counterbalancing effect keeps the face square to your swing path for longer, promoting purer impacts and minimizing twisting.
I first noticed the impact (no pun intended) this had on my long-range putting. Before, my hands tended to take over on lag putts, getting too wristy and manipulating the face open or closed. But with the double bend’s counterbalancing, my stroke feels much more like a pendulum – smoothly swinging back and forth without unnecessary angles.
This has led to much more precise speed control from distance. I’m able to repeat a smooth tempo without any extra flick or deceleration. And the centeredness from that second bend keeps my long putts online, eliminating those embarrassing pushes and pulls.
But where I’ve seen the biggest improvement is on short putts. We’ve all been victimized by the dreaded “push-yip” from 3 feet – and I was as chronic as they come. By preventing too much hand action, the double bend has given me newfound touch on shorties.
That smooth pendulum stroke imparts the perfect pace, and the enhanced alignment breeds confidence. I’m no longer worried about my hands manipulating the face and sending the ball off line. With the counterbalanced setup, my 3 footers now feel automatic.
In testing, I’ve found blade-style putters amplify these purity benefits even more. The smaller profile highlights any synchronicity issues between your hands and the face. But the counterbalancing effect of the double bend puts everything in harmony. My hands stay right with the blade through impact – eliminating any disconnect that could open or close the face.
And don’t even get me started on the improved roll I’m seeing from this centeredness. With no twisting or torqueing, the putter face seamlessly works in sync with the arc of your swing. The result is a piercing trajectory and smooth end-over-end roll that seems to zip forward after impact.
If you really want to take your stroke to the next level, diago the double bend a try. The counterbalanced shaft brings your hands and the head into harmony, promoting a silky smooth pendulum motion. Say goodbye to pushes, pulls and misalignment issues, and get ready to drain those 3 footers with confidence.
Consistency on the greens doesn’t come easy. But by keeping your stroke free of any disconnects or manipulations, the double bend shaft allows pureness and precision to shine through. Your buddies will think you’ve been putting for years like a tour pro once they see those dead-center rolls!
The Double Bend Promotes A Square Face At Impact
Golfers, get ready to revolutionize your putting game this season with an exciting new technology – the double bend putter shaft. This innovative shaft design gently promotes a square clubface at impact, helping you drain more putts and lower your scores.
If you’ve struggled with inconsistent putting, the double bend could be the missing link to gaining confidence on the greens. By improving face control, this clever shaft enhances accuracy and feel.
Curious what all the hype is about? Here are 15 compelling reasons to give the double bend a try:
1. Promotes a Square Impact
The double bend shape naturally encourages the face to be square to your target line at impact. This corrects face rotation issues that lead to missing putts right or left of the hole.
2. Softens Wrist Action
The double bend allows your wrists to flex at address, reducing tension that leads to erratic putting strokes. Think silky smooth instead of rigid and jerky.
3. Improves Pace Control
With improved face control comes enhanced pace judgement. You’ll leave fewer putts short or ram them 10 feet by. Dialing in distance gets much easier.
4. Minimizes Face Manipulation
Twisting or rotating the face during your stroke won’t be necessary with the double bend. It sets the face naturally square, allowing a pendulum-like motion.
5. Quiets Hands
Letting the shaft do the alignment work means less hand action is required. With hands quieted, a supple, freewheeling stroke can emerge.
6. Boosts Consistency
All these benefits lead to one thing: consistency. The double bend delivers results putt after putt, round after round, eliminating second-guessing.
7. Fits Multiple Strokes
From straight-back-straight-through to arcing styles, the double bend works for different strokes. Find your natural path and tempo.
8. Enhances Alignment
With the face inherently square, all that’s left is aligning your body properly. The double bend makes alignment errors less likely.
9. Forgiving on Mis-hits
Miss-hit putts still have a decent chance of starting on line with the double bend. You’ll drain putts struck slightly off-center.
10. Easy to Use
Complicated means distracting. The double bend simply gives a soft reminder during your stroke, with no conscious manipulation needed.
11. Fits Multiple Lengths
Made to fit putters from 32 to 48 inches, the double bend allows matching length to your build and preference.
12. Works for All Handicaps
Duffers will appreciate the alignment aid, while better putters gain superior feel. It can elevate any golfer’s game.
13. Game-Improvement Design
The double bend is a game-improvement putter shaft, engineered to help amateurs drain more putts. Expect instant results.
14. Popular on Pro Tours
Already gaining popularity with top tour pros, the double bend is making waves in competitive golf. Let the pros inspire your own game.
15. Custom Fitting Available
Looking to maximize performance? Get personally fit for length, lie angle, loft, and grip style by a professional club-fitter.
This season, give your putting an upgrade with the revolutionary double bend shaft. Engineered for better alignment, feel, and consistency, it just may be the secret weapon that drops your scores. Why gamble with iffy putting when the technology exists to dramatically improve this critical part of golf?
Visit a quality golf retailer and give the double bend a test roll – you just may become a convert. And soon those slippery 3-footers will feel more like gimmes as you march towards all-time low scores. Let the double bend unleash your potential on the greens!
Ideal For Players Struggling With Face Rotation
If your putts constantly miss right or left of your target line, the revolutionary double bend putter shaft could be the answer you’ve been looking for. Engineered to gently promote a square clubface at impact, this clever design is ideal for players struggling with face rotation issues.
Face rotation plagues countless amateur golfers. Even a few degrees of twisting or manipulation during the stroke can send putts off line. Yet many golfers unconsciously rotate or twist the face, negating their aim and leading to missed putts and frustration.
By improving face control throughout the stroke, the double bend limits twisting and rotation. So if you feel like you’re constantly fighting your putter face, keep reading to learn why this new shaft technology could be a total game-changer.
What Causes Face Rotation?
Several swing flaws and technical mistakes typically cause face rotation during the putting stroke:
- Tight wrists and hands
- Flicking or twisting clubhead through impact
- Lack of pendulum motion
- Manipulating the face to “help” the ball start on line
- Overactive hands due to tension or anxiety
Often these issues are subconscious reactions when trying to make a putt. But any manipulation or rotation leads to inconsistency, even if the face only moves a few degrees off square.
How the Double Bend Fixes Face Rotation
With its unique dual bend design, this shaft gently encourages the face to remain square throughout the stroke in several key ways:
- Allows soft hands and wrists to eliminate tension
- Discourages flick or twist release through impact
- Sets face square naturally at address
- Maintains face angle without manipulation
- Forgiving on off-center hits to keep ball online
This makes a free-flowing, pendulum-like motion much easier to achieve. With face rotation minimized, aligning your body is all that’s needed to start the ball on your intended line.
Double Bend Benefits
Here are 5 compelling benefits the double bend provides for players fighting face rotation:
- Consistency – By removing face manipulation, your results will be far more consistent
- Pace Control – With solid contact, you’ll dial in distance control much better
- Confidence – When you can trust your putter face, fear melts away
- Touch – Blending correct face angle with smooth tempo develops a soft touch
- Alignment – With face fixed, aligning your body becomes foolproof
Rather than battling a misaligned clubface, you can finally let your natural stroke emerge. Expect rapid improvement in both feel and results.
Maximizing Performance
To maximize the effectiveness of your new double bend putter, keep these tips in mind:
- Develop a free-swinging, pendulum stroke
- Maintain tempo with a smooth acceleration
- Focus on aligning your eyes, shoulders and feet
- Let the shaft do the face rotation work for you
- Relax your hands, arms and shoulders
- Practice lag putting to increase feel
With a few adjustments to your setup, stroke fundamentals and practice habits, you’ll quickly shed bad face rotation tendencies. Let the double bend’s specialized design do what it does best – keep your putter face square when you can’t.
If you’ve been plagued by face angle issues, try this exciting new shaft technology for yourself. With a few rolls on the practice green, you’ll immediately feel and see the difference. Expect transformed feel, touch and consistency in short order. Isn’t it time you finally putted to your potential?
Creates Less Wrist Action For Improved Consistency
Golfers are always looking for ways to improve their putting and gain an edge on the greens. That eternal quest for lower scores has led to constant putter innovations over the years – from belly putters to extra-long putters to creative grip styles. The latest development ready to shake up the putting scene is an innovative new putter shaft called the Double Bend from Taylormade.
This unique shaft boasts a distinctive dual-curve shape designed to promote a more compact, repeatable putting stroke with less wrist action. By limiting extraneous motion, the Double Bend enhances consistency on the greens. This season, you may want to upgrade your flatstick with the new Double Bend putter shaft to see if it can shave those extra strokes off your scorecard.
Promotes Better Alignment and Fewer Mishits
The dual bends in the unique Double Bend shaft serve multiple purposes. First, they improve alignment by giving golfers an easy visual guide to help square the face at address. The bends create clear sightlines to enhance your ability to line up putts precisely every time. Squaring up misaligned putts is one of the biggest causes of misses on the green.
In addition, the double curve shaft significantly reduces unwanted face rotation during the stroke. Face rotation leads to mishits and inconsistent distance control. The straightened motion enforced by the Double Bend minimizes face angle change to hit more putts on line with better speed.
Lessens Hand Action for Smother Roll
Excessive hand and wrist action during the putting stroke can impart unwanted sidespin and negatively influence launch angle. This leads to more putts skidding off line. The bent geometry of the Double Bend reduces hand action to create purer roll end over end off the face.
The smoother motion also increases solid contact for better distance control. Putts hit with the Double Bend tend to start and hold the intended line instead of veering off course. Dialing in reliable speed is easier when your hands and wrists stay quiet during the stroke.
Fosters a More Natural Arc
Standard straight putter shafts force some golfers to manipulate the stroke into an unnatural shape to keep the face square to the target line. This manipulation can lead to inconsistency and mental distraction.
The dual-bend Double Bend allows your hands to swing back and through on your ideal arc without having to intentionally rotate or manipulate the face. It sets the face at the proper angle without any special effort. The free-flowing stroke enabled by the Double Bend feels more natural to many golfers.
Promotes Better Rhythm and Tempo
Achieving the optimal pace for smooth distance control can prove challenging on the greens. Rushing the stroke throws off your rhythm and causes inconsistent pace. The bent configuration of the Double Bend shaft helps control tempo and promotes smooth acceleration through the ball.
The dual arcs assist your backswing and follow through at just the right cadence for ideal rhythm. Without having to strain or consciously control the clubhead, maintaining a steady tempo becomes much simpler with the Double Bend.
Requires Less Mental Focus
Putter design features requiring excess mental focus and attention can be counterproductive for feel players who excel when their mind quiets over the ball. The corrective shape of the Double Bend reduces the need to consciously guide the face and motion, freeing your brain to see the line and feel the pace.
With less deliberate wrist manipulation required, you can shift focus to speed and reading the green rather than mentally guiding the putter face. Confident stroke makers should benefit from taking conscious control out of the equation.
Boosts Consistency on Off-Center Hits
Even tour pros with world-class putting skill mis-hit putts slightly off-center at times. The Double Bend provides a bigger sweet spot than standard shafts to maintain speed and line when you don’t catch the ball perfectly out of the middle.
The extra forgiveness from the expanded sweet spot minimizes speed loss on off-center contact to avoid leaving putts woefully short. Perfection is impossible on the greens, so taking advantage of extra forgiveness can save strokes.
Works with Virtually Any Putter Head
The beauty of the Double Bend as an aftermarket upgrade is its near universal compatibility. You can install these innovative shafts on blade-style putters, mid-mallets, high MOI mallets, counterbalanced putters, and a wide variety of other head shapes.
TaylorMade offers Double Bend models made specifically to fit popular current putters like the Spider and TP line along with classics like the Ghost Spider. Upgrading your existing wand is a breeze by ordering a Double Bend replacement shaft in the appropriate length and lie angle.
Provides Counterbalancing Options
For golfers seeking maximum stroke control, Taylormade offers Double Bend shafts in counterbalanced configurations. Adding weight to the grip end balances out a heavier head to relieve tension in the hands and wrists during the stroke.
This further reduces unwanted stroke manipulation to maximize consistency. Counterbalanced Double Bend models allow fine-tuning balance and feel while retaining the key benefits of the curved shaft technology.
One Length Fits All Sizes
Conventional putter shafts come in an array of lengths to accommodate different player heights. Taylormade keeps things simple by offering the Double Bend in just one 35″ length suitable for virtually any golfer. There are 17 lie angle options to dial in proper fit.
One length simplifies fitting and allows all golfers to take advantage of the Double Bend’s stroke improvements. Smaller golfers also gain stability from the longer shaft. Slight choking down adapts the fit for bigger golfers.
Looks Great Behind the Ball
A clean, confidence-inspiring look at address is an underrated putter feature. Some golfers simply feel better when they love the aesthetics of their putter. The Double Bend’s gracefully curved dual arcs create visual appeal behind the ball.
The high-tech futuristic shapes look fast and suggest better performance. Whether you choose classic plumbing neck blades or modern mallets, the fluid lines blend beautifully with putter designs.
Installs in Minutes
Swapping out your stock putter shaft for an aftermarket Double Bend upgrade takes only minutes. Simply unscrew the existing shaft, align the Double Bend, and tighten in place. Loft and lie adjustments are equally fast with the proper tools.
You can switch shafts in the parking lot before a round if desired. Custom fitting allows dialing in the optimal specs. But you can play right away while fine tuning the details later.
This season, look to gain an edge on the greens with the revolutionary Taylormade Double Bend putter shaft. The dual bending promotes better alignment, stroke control, rhythm, and consistency for lower scores. With models fitting most putters, the Double Bend provides an easy upgrade offering performance benefits for golfers at all skill levels.
Lowers Hands Throughout The Stroke For Better Feel
As golfers, we’re always searching for that magic bullet to transform our putting and take our scores to the next level. The latest innovation promising to be a potential game-changer on the greens is the Taylormade Double Bend putter shaft. This uniquely curved shaft could revolutionize your putting stroke if you upgrade your flatstick this season.
With its distinctive dual-arc shape, the Double Bend allows your hands to swing lower and through impact for a smoother, pendulum-like stroke. Lowering the hands reduces wrist action for superior feel and touch. Here’s a closer look at 15 reasons why this new putter shaft technology may be the missing link to consistently draining more putts.
Promotes a Wrist-Free Stroke
Excessive wrist action during the putting stroke can lead to inconsistency in pace and directional control. The dual bends in the Double Bend shaft eliminate the need to flip or manipulate the wrists, promoting a smoother swinging motion.
With your hands and wrists staying quiet, a truer pendulum stroke is achievable. This enhances rhythm while taking unwanted wrist action out of the equation.
Lessens Grip Pressure for a Softer Feel
Overgripping the putter is a common mistake amateurs make, causing tension that hurts feel and touch. The Double Bend allows your hands to swing freely under the shaft, reducing the need to tightly grip the club.
Lighter grip pressure leads to a softer, more fluid feel through impact. Your enhanced touch lets you better read greens and control distance more sensitively.
Lowers Hands for Ideal Impact Conditions
Having the hands too high or low at impact can negatively influence launch angle, ball speed, and directional consistency. The ideal hand height is just below the equator of the ball.
The dual-bend Double Bend encourages this optimal hand placement for efficient energy transfer into the ball at impact. Consistently ideal impact dynamics boosts rolling consistency.
Promotes an Arc Path
Many players struggle with a straight back-and-through stroke pattern that can impart unwanted sidespin. The dual arcs of the Double Bend make it easier to swing the putter head back and through on an arc path.
Arcing the stroke produces smooth, straight roll without sidespin. The bent shape of the shaft assists your hands in naturally swinging on an ideal arc.
Minimizes Hand and Wrist Torque
Off-center ball striking can twist the hands and wrists, closing or opening the face at impact. This imparts sidespin and hurts directional control.
The corrective shape of the Double Bend eliminates twisting forces, keeping the face square even on mis-hits. Eliminating torque tightens dispersion and gets putts rolling on your intended starting line.
Lessens Tension in Hands and Forearms
Hinging your wrists while maintaining a steady grip requires muscular tension that can hinder fluid stroke motion. The Double Bend alleviates this tension by encouraging hands-free motion.
Relaxed hands and arms allow unimpeded acceleration through impact. Tension-free motion creates smoother pace without herky-jerky acceleration.
Quiets Overactive Hands
Some players have a tendency to use too much hand action while putting as they try to guide and steer the stroke. This excessive hand activity disrupts a smooth pendulum motion.
By keeping hands passive under the Double Bend shaft, overactive hands get quieted down. Eliminating extra movement creates a calmer, more flowing stroke.
Encourages Better Ball Contact
Ideal impact involves striking the ball just before reaching the low point of your arc. This compresses the ball cleanly into the turf.
With the Double Bend lowering your hands, you more naturally brush the ball at the optimal descending point in your stroke. Sweeping through the ball cleanly enhances speed consistency.
Helps Sync the Stroke Path and Face
Lining up the face angle and stroke path is essential for starting putts on your intended line. Misalignment between path and face produces missed putts.
The Double Bend keeps the face square to your swing path for better direction. With stroke path and clubface synchronized, off-line misses become less frequent.
Sets Wrists at Ideal Angle
Proper wrist hinge creates an efficient putting stroke. Too much or too little hinge increases inconsistency. The bent shape of the Double Bend naturally sets your wrists at the optimal angle.
With wrist hinge dialed in, you don’t have to consciously focus on hand or wrist positions. One less swing thought clarifies your mind.
Promotes an Inside-Out Stroke
An inside-to-out stroke pattern ensures solid impact for straight roll. It also enhances directional control and distance judgment.
The curved shaft of the Double Bend facilitates moving the clubhead inside the target line on the backswing and outside on the follow-through for ideal inside-out ball-striking.
Improves Pendulum Motion
A pure pendulum putting stroke where the clubhead swings freely on an arc is every golfer’s goal. This allows seamless acceleration through impact.
The Double Bend’s dual curves make it easier to swing the clubhead unimpeded along your ideal arc. Unrestricted motion breeds consistency.
Fits a Wide Variety of Putter Designs
You don’t need a new putter to benefit from the Double Bend’s enhancements. It fits as a replacement shaft on many classic and modern blade and mallet putters.
TaylorMade offers custom Double Bend shafts to seamlessly match popular putter models. Upgrading is as easy as ordering the correct length and lie angle.
This season, treat yourself to the specialized Double Bend putter shaft as the final piece to solving your putting woes. With enhanced rhythm, smoother roll, and better distance control, lowering your hands with the Double Bend may be just what you need to take your scoring to new lows.
Minimizes Fat And Thin Shots By Keeping The Face Online Longer
As avid golfers, we’re constantly experimenting with new equipment innovations promising to improve our scores. One of the latest breakthrough products with the potential to revolutionize your putting is the Taylormade Double Bend putter shaft.
This uniquely bent shaft utilizes dual curves to promote an arcing stroke that maintains face alignment longer through impact. Minimizing face rotation reduces fat and thin mis-hits for improved distance control. If you want to hole more putts, upgrading to the Double Bend may be a game-changer.
Stabilizes Face Angle at Impact
A common flaw in putting strokes is the face rotating open or closed through impact, causing misdirection and poor contact. The dual arcs of the Double Bend minimize face rotation to keep the face aligned longer.
Reducing face angle change at impact significantly tightens dispersion and improves solid center strikes. The face stays online longer for pure roll.
Lessens Twisting Forces
Off-center hits can twist the shaft and cause the face to open or close, leading to fat and thin shots. The corrective bending of the Double Bend neutralizes these twisting forces.
With less shaft torque, the face stays square to the target line even when you mis-hit shots slightly towards the toe or heel. Keeping the face aimed properly improves contact across the face.
Promotes an Arc-Based Swing
Arcing the putter head along a pendulum path keeps the face aligned to your swing direction. A straight back-and-through stroke can lead to face rotation.
The dual bend geometry encourages your ideal arc motion to enhance face control through impact. Arcing naturally squares the face for longer without manipulation.
Synchronizes Face Angle and Swing Path
Inconsistency often stems from a mismatch between your swing path and where your face is aimed. The Double Bend keeps the face aligned to your arcing path.
With face angle and swing direction synchronized, putts start and roll out on your intended line. Preventing an open or closed face at impact improves accuracy.
Limits Wrist Action
Excessive wrist hinging and flipping during the stroke is a common fault that influences face angle and imparts sidespin.
The Double Bend minimizes wrist action, keeping hands and forearms quiet to isolate face rotation. Eliminating extra wrist motion keeps the face aimed properly at impact.
Creates a More Repeatable Setup
Inconsistent setup alignment causes many putting woes. From stroke to stroke, your eyes may not perfectly align the face to your target line.
The Double Bend makes it easier to replicate the exact same starting position using its dual alignment aids. Consistent setups lead to consistent stroke paths and impact alignments.
Promotes Continuous Acceleration
Inconsistent pace stems from decelerating into impact, usually caused by face rotation or toe-heel mis-hits. The Double Bend minimizes deceleration.
With the face staying online longer through impact, your stroke freely accelerates without disruption. Smooth, continuous acceleration creates reliable touch and feel.
Reduces Numbing Vibration
Fat and thin mis-hits send unpleasant vibrations into your hands, disrupting feel and pace judgment on subsequent putts.
By improving solid impact across the face, the Double Bend decreases negative vibration and feedback. Your enhanced feel and touch give better green reading abilities.
Lessens Grip Pressure
Overgripping often leads to tension and wrist manipulation that causes face angle problems at impact. The Double Bend promotes light grip pressure.
Relaxed hands swing freely under the shaft to eliminate extraneous movements that influence face angle. Light grip pressure enhances fluid stroke motion.
Forgives Off-Center Strikes
Even great putters mis-hit an occasional shot. The Double Bend provides extra stability and forgiveness on toe and heel contacts.
The dual curves keep the face aimed properly even on slightly off-center hits. Excellent directional stability gets putts rolling the intended line when you fail to strike it perfectly.
Promotes Smooth Roll Without Skidding
Face rotation at impact imparts backspin that causes putts to skid and hop. Keeping the face aligned longer eliminates skidding.
Putts struck with a Double Bend shaft stay true to the target line without deviation. The ball smoothly rolls end-over-end like a perfect rifle shot.
Provides Tactile Feedback for Better Distance Control
The sweet-spot feel of flushed shots gives clues about impact quality and stroke efficiency. Solid Double Bend strikes give great tactile feedback for judging distances.
With no vibration from off-center hits, your stroke feels smooth and effortless. You can accurately gauge appropriate speed from this enhanced feel and touch.
Easy Length and Lie Adjustments
Getting properly fit for length, lie angle, and offset ensures maximizing the Double Bend’s benefits. Changing these specs takes only minutes.
A few turns of a wrench lets you fine-tune setup, swing motion, and impact dynamics until you find your personal sweet spot. Dialed-in custom fitting amplifies performance.
This season, be sure to consider the Taylormade Double Bend as a secret weapon to transforming your putting. With superior face control through impact, the Double Bend minimizes mis-hits for more consistent touch, pace, and direction. Make more putts and go low with better roll from this revolutionary curved shaft.
Allows For A More Upright Posture At Address
As passionate golfers, we’re always on the lookout for innovative new equipment that can give us an edge. One of the most exciting new products promising to take your putting to the next level is the Taylormade Double Bend putter shaft.
This uniquely bent shaft allows you to stand taller at address for better alignment and posture. The curved shape improves spine angle for a stroke that feels more upright and rotary. Read on for 15 reasons why the Double Bend could revolutionize your putting this season.
Promotes Ideal Posture
Poor spinal tilt and slouched posture lead to misalignment and tension in the stroke. The Double Bend allows standing taller to activate core muscles for ideal posture.
With your weight balanced and spine straight, your shoulders and chest align perpendicular to the target line. This consistent posture enhances setup precision.
Improves Shoulder Alignment
Hunching over the ball can open or close your shoulder line, influencing face angle and swing path. The upright stance enabled by the Double Bend keeps shoulders square.
With your shoulders properly aligned parallel left of the target, the stroke stays on plane. This promotes starting the ball on line and holing more putts.
Activates Leg Muscles
Good posture engages your legs to provide a solid foundation. Slouching disengages the lower body, making it hard to balance during the stroke.
The Double Bend let’s you stand taller to activate leg drive. With your legs engaged, your stroke gains stability and fluidity.
Reduces Tension in the Arms
Bending over too much can cause tension in your arms that influences feel and rhythm. The upright posture encouraged by the Double Bend reduces arm tension.
Relaxed arms swing freer for better pace control and smoother acceleration through impact. Tension-free motion enhances your touch.
Aligns Your Eyes Directly Over the Ball
Looking down steeply at the ball makes it hard to align the face and read greens accurately. The Double Bend brings your eyes directly over the ball.
This ideal vantage point provides a clear view of your alignment and the ball’s rollout line. Your improved visual perspective leads to better aim.
Keeps the Triangle Intact
Proper geometry requires keeping the triangle between your shoulders, arms, and hands intact during the stroke. Slouching collapses this triangle.
The Double Bend maintains ideal geometry so your triangle retains its shape. This connected motion improves efficiency for consistent pace and direction.
Allows Your Arms to Hang Naturally
Hunching over forces your arms out away from your body unnaturally. This throws off swing mechanics. The Double Bend lets your arms hang straight.
With arms dangling naturally beneath your shoulders, the stroke stays compact and connected. Your natural arm structure guides efficient motion.
Engages Your Core Muscles
Activating your core stabilizes your upper body during the swing. Bending forward excessively makes it tough to engage torso muscles.
Standing upright engages obliques and abdominals to steady your upper body. Core strength improves repeatability swing to swing.
Makes it Easier to Shift Your Weight
Ideal putting involves transitioning your weight smoothly from your back foot at address to your front foot during the stroke. This adds power.
Upright posture enabled by the Double Bend provides the balance and activation to perform an efficient weight shift. Enhanced rhythm breeds consistency.
Minimizes Movement Away From The Ball
Excessive spinal tilt can cause straightening up during the backstroke, moving your head away from the ball. This disrupts the motion’s geometry.
The Double Bend keeps your upper body stable to minimize any rearward drift on the backswing. Your head stays steady over the ball.
Improves Weight Distribution
Good balance stems from even weight on both feet at address. Bending forward shifts weight toward your toes. The Double Bend centers weight evenly.
With weight split 50-50 over both feet, balance improves. This centered posture prevents swaying and sliding during the stroke.
Provides Consistent Ball Positioning
Ball position influences solid impact and directional consistency. The ideal spot is just forward of center. Bending too far forward repositions the ball.
The upright stance enabled by the Double Bend naturally positions the ball in the optimal hitting zone. This facilitates solid ball-first contact.
Feels More Rotational and Circular
Hunched posture makes the stroke feel choppy and compact. Upright posture promotes a wider rotational arc.
Standing taller activates your core to power a wider circular swing. The extended arc creates smooth acceleration through the ball.
This season, upgrade your putter with the revolutionary Taylormade Double Bend shaft. The ability to stand taller promotes ideal posture and alignment for enhanced rhythm, accuracy, and touch on the greens. Take your putting to new heights with a more upright and rotary stroke.
Prevents The Common Issue Of Pushing Or Pulling Putts
As dedicated golfers, we’re always keeping an eye out for cutting-edge equipment innovations that can elevate our game. One of the most exciting new products with potential to transform your putting is the Taylormade Double Bend putter shaft.
This uniquely bent shaft straightens out your stroke to prevent pushed and pulled putts. The dual curves promote an in-to-square-to-in swing path for enhanced directional accuracy. Read on for 15 compelling reasons to upgrade your flatstick with the revolutionary Double Bend.
Promotes an In-to-Square-to-In Swing
The ideal putting stroke travels straight back and straight through your target line. Deviations cause pushed or pulled shots. The Double Bend facilitates this tight in-to-square-to-in path.
The dual arcs make it easier to trace a straight line back and through impact, preventing the face from opening or closing. Your putts launch directly at your aim point.
Restricts Face Rotation
Pushed and pulled putts often result from the face rotating open or closed relative to your swing path. The Double Bend limits this rotation.
By keeping the face square to your back-and-through stroke line, shots launch straight on your intended starting line without curving off-target.
Lessens Wrist Action
Excessive wrist hinge and flip during the stroke can steer putts off-line. The Double Bend quiets wrist action.
With passive hands and arms, manipulation of the clubface is minimized for straight, true roll. Your strokes draw a straighter bead to the hole.
Improves Aim and Alignment
Inconsistent alignment causes many pushed and pulled shots. The dual arcs of the Double Bend assist precise setup alignment.
By giving you clear sightlines parallel and perpendicular to the target line, each stroke begins perfectly aligned for straight roll end-over-end.
Synchronizes Path and Face Angle
Misalignment between your path and face angle produces curved misses instead of straight rollout. The Double Bend syncs path and face.
With your swing direction and clubface precisely matched, putts launch directly on line without initial curvature. Improved direction breeds confidence.
Minimizes Arc Shape Inconsistencies
Varying arc shapes swing to swing make it tough to trace a straight line through impact. The Double Bend stabilizes your arc.
The dual bend geometry promotes repeating the same rounded arc each time. This repetitive shape ensures swinging straight back and through.
Reduces Off-Center Mishits
Toe and heel mis-hits often cause the face to open or close, pulling or pushing the ball offline. The Double Bend improves centeredness.
With enhanced accuracy across the face, fewer mishits drag putts off-line. Your miss dispersion tightens around the target.
Lessens Grip Pressure
An overly tight grip restricts free release through impact, influencing face angle and direction. The Double Bend promotes soft grip pressure.
Light, relaxed hands allow the face to square up freely with no tension or restriction. Ideal release improves directional consistency.
Allows Your Eyes to Track Straight
Looking outside or inside the target line during the stroke can steer putts off path. The Double Bend keeps your eyes tracking straight.
With your eyes, shoulders, and torso aimed down the target line, your visual perspective traces a straight path to guide the clubface squarely.
Promotes Calm, Quiet Hands
Overactive hands disrupt a smooth pendulum stroke, causing deviations and face manipulation. The Double Bend quiets hand action.
With passive hands and arms swinging the putterhead freely, the stroke flows effortlessly down the target line without veering off path.
Improves Distance Control
Pushed and pulled strokes often come up short or long, making pace hard to calibrate. Straight strokes enhance distance judgment.
With putts rolling out on your intended line, you can accurately gauge speed and touch. Making more putts breeds confidence in your distance control.
Provides Consistent Ball Positioning
Ball position affects face angle and direction at impact. Incorrect positioning can lead to pushed or pulled shots. The Double Bend positions the ball optimally.
With the ball always in the ideal hitting zone, your strokes stay online. Consistency in setup leads to consistency in putting results.
This season, upgrade your flatstick with the revolutionary Taylormade Double Bend shaft. Its curved shape straightens out your stroke to prevent pushed and pulled misses while inspiring confidence. Eliminate those pesky off-line putts with enhanced directional accuracy.
Gives You More Confidence Over Short Putts
As dedicated golfers, we’re always searching for innovative equipment to improve our scores. One exciting new product with potential to boost your confidence on the greens is the Taylormade Double Bend putter shaft.
This uniquely bent shaft promotes better rhythm, touch, and accuracy to take the fear out of short putts. Read on for 15 compelling reasons why this revolutionary technology could transform your performance on tricky short knocks.
Enhances Distance Control
Reliable pace judgment inspires confidence on short putts. The smooth, pendulum motion of the Double Bend improves control over distance.
With consistent acceleration through impact and enhanced feel, you gain assurance in calibrating touch and speed for short holes.
Lessens Jabbing Motion
Aggressive jabbing at short putts is a common flaw causing inconsistency. The fluid motion encouraged by the Double Bend eliminates jabbing.
The smooth, arcing stroke prevents deceleration. Your smooth tempo enhances the touch required on delicate short putts.
Minimizes Wrist Breakdown
Flipping or manipulating the wrists disrupts feel and pace, especially from short range. The Double Bend reduces wrist action.
With quiet hands and forearms, your stroke stays free of extraneous movements. Consistent wrist conditions breed confidence.
Promotes Better Alignment
Precise aim is critical on short putts. The Double Bend’s alignment aids help set the face perfectly square.
With your eyes, shoulders, and clubface aligned parallel and perpendicular to the target line, strokes launch directly at the cup.
Improves Feel Off The Face
The feel and responsiveness of solid contact provides clues on distance and touch. The Double Bend enhances feel to gauge pace.
With no vibration from off-center hits, your sense of touch gives great speed feedback. Improved feel breeds confidence.
Lessens Grip Tension
Over-gripping restricts a free release and disrupts touch. The Double Bend promotes ideal light grip pressure.
Relaxed hands allow the face to square up freely through impact for responsiveness and rebound off the green. Ideal grip pressure improves feel.
Minimizes Deceleration
Slowing down approaching impact hurts feel and consistency on delicate putts. The Double Bend maintains acceleration.
With no disruption or manipulation during the stroke, tempo stays smooth and continuous. This fluid motion enhances touch.
Quiets Overactive Hands
Letting your hands get too active hurts finesse. The Double Bend eliminates excess hand action.
With your hands passive under the shaft, short strokes feel calm and controlled. Silencing overactive hands inspires confidence.
Promotes Consistent Ball Positioning
Varying ball position hurts consistency on short putts. The Double Bend positions the ball optimally every time.
With every setup replicating the ideal forward position, consistency improves. Repetition in setup leads to repetition in results.
Provides Greater Focus
Excessive technical thoughts disrupt focus over short putts. The Double Bend minimizes conscious adjustments.
With less need to actively guide the face and motion, your mind zeros in on speed. Singular focus boosts confidence.
Lessens Anxiety
Fear of short misses can create tension that leads to miscues. The Double Bend’s stability soothes anxiety.
Knowing each subtle stroke will start and roll true takes pressure off. Relief from anxiety lets your skills shine through.
This season, attack short putts with renewed assurance by upgrading to the innovative Taylormade Double Bend shaft. With Tour-quality feel and touch, the Double Bend takes the yips and doubt out of your short game.
Works Well With Blade-Style Putter Heads
As dedicated golfers, we’re always keeping an eye out for innovative new equipment that can elevate our game. One exciting product making waves right now is the Taylormade Double Bend putter shaft.
This uniquely bent shaft pairs perfectly with classic blade-style putters to promote better feel and control. Read on for 15 reasons why combining the Double Bend with your favorite blade could take your putting to the next level.
Enhances Precision of Blade Putters
Blade putter heads provide great responsiveness for discerning feel players. The Double Bend further improves alignment precision.
By adding enhanced alignment aids, the already sharp aim of blades gets even tighter. The combination yields pinpoint accuracy.
Maintains Classic Appearance
Many golfers prefer the clean, timeless lines of blade putters. The sleek Double Bend retains this aesthetic beautifully.
The smooth dual bends integrate seamlessly with plumbing neck blades for a refined, traditional profile from every angle.
Transfers Feel Instantly
Blade construction puts solid contact feel directly into your hands thanks to the unsupported face. The Double Bend magnifies this sensation.
With no vibration or torque, the enhanced feel of center strikes resonates through the steel shaft into your grip. Ideal for responsive blades.
Minimizes Unwanted Twist
Blades have very little rotational resistance, causing twisting on mis-hits. The Double Bend stabilizes twist.
The bent shaft straightens out your stroke to minimize torque-induced rotation. Your blade’s face stays square longer for solid roll.
Improves Consistency on Off-Center Hits
Blades offer minimal forgiveness on mishits. The Double Bend expands the effective hitting area.
Heel and toe mis-hits maintain velocity better thanks to bend-enhanced MOI. Your blade putter behaves more like a mallet.
Encourages an Arc Path
Blades work best when swung on an arcing path rather than straight back and through. The Double Bend promotes this ideal arc.
The curved shape makes it easier to trace a smooth arc. Your blade swings true on its engineered path for better results.
Enhances Setup Alignment
Precise alignment is challenging with blades’ minimal sightlines. The Double Bend facilitates flawless setups.
Clear parallel and perpendicular lines make squaring the face to your target line easy. Improved alignment consistency pays dividends.
Provides Counterbalance Options
Some players prefer counterbalanced blade putters for enhanced rhythm. The Double Bend accommodates adjustable weighting.
Customizable mass balancing fine-tunes feel and tempo while retaining the Double Bend’s key performance benefits.
Maintains Classic Shape Visually
Blades look best to many golfers’ eyes. The sleek Double Bend preserves this elegant visual design.
Low bending maintains a slim, compact profile that keeps blades looking clean rather than bulky or busy.
Promotes Better Pace Control
Blades demand finesse and touch for distance control. The Double Bend enhances subtle feel.
Smooth acceleration with no deceleration improves responsiveness. Dialing in speed is easier with this heightened touch.
Provides Toe Hang Options
Moderate toe hang promotes an arc stroke path. Double Bend models accommodate different hang angles.
Optimize toe hang to sync the blade’s release with your ideal swing arc. Customizable hang pairs perfectly with your motion.
Dampens Vibration
Blade construction often sends distracting vibrations into the hands. The Double Bend tames unpleasant feedback.
With no torque or twist, off-center hits transmit less shock or vibration. Hands stay calm and sensation-free.
This season, consider combining the revolutionary Taylormade Double Bend shaft with your trusted blade putter. The pairing could take your accuracy, touch, and consistency to new heights on the greens.
The Two Bends Improve Energy Transfer For Better Roll
As avid golfers, we’re always seeking out new equipment innovations that can elevate our game. One exciting new putting product generating buzz right now is the Taylormade Double Bend putter shaft.
This uniquely bent shaft utilizes dual curves to optimize energy transfer through the ball for superior roll. Read on for 15 reasons why the Double Bend could take your putting performance to the next level this season.
Promotes Solid Impact Across The Face
Inconsistent strikes sap energy transfer, reducing topspin and launch angle. The Double Bend improves impact consistency.
With enhanced MOI and reduced twisting forces, shots land solidly across a larger part of the face for efficient energy transfer.
Maximizes Ball Compression
Insufficient compression limits energy imparted to the ball, hurting velocity and roll quality. The Double Bend enhances compression.
The downward blow’s precision optimizes ball compression against the green. This squeezes maximum power into putts off the face.
Improves Launch Conditions
Launch angle and ball speed affect rollout consistency. The Double Bend optimizes launch metrics.
Precise impact alignment and reduced face rotation produce ideal launch qualities for smooth end-over-end roll.
Lessens Grip Pressure
Tight gripping restricts clubhead release, slowing pace. The Double Bend promotes light grip pressure.
Relaxed hands allow freer release for maximum energy transfer. Smooth acceleration sends putts rolling hotter and truer.
Enhances Rhythm and Tempo
Herky-jerky strokes sap power and roll quality. The Double Bend promotes smooth tempo.
Unimpeded pendulum motion generates effortless acceleration through impact. Consistent tempo improves energy delivery.
Minimizes Twist On Off-Center Hits
Twisting forces dissipate energy on mis-hits. The Double Bend lessens torque.
Off-center heel and toe strikes lose less velocity thanks to reduced twisting. Consistent ball speed enhances great roll.
Stabilizes Clubface
A closing or opening clubface at impact robs power. The Double Bend keeps the face square longer.
Maintaining loft and face angle through impact optimizes ball launching for ideal energy transmission.
Promotes Pure Roll Without Skidding
Excessive backspin from face rotation reduces forward momentum, causing skidding. The Double Bend prevents skidding.
With no face manipulation, putts take off rolling pure end-over-end. This effortless motion maintains velocity and line.
Lowers Drag For Smooth Acceleration
Drag during the stroke hampers clubhead speed. The Double Bend’s aerodynamic shape reduces drag.
Unimpeded by air resistance, the clubhead accelerates faster through impact for enhanced energy into the ball.
Lessens Deceleration Approaching Impact
Slowing down into the ball bleeds power. The Double Bend maintains acceleration.
Smooth tempo without hesitation provides continuous speed buildup into contact. Your strokes stay charged with power.
Enhances Forward Press Feel
Some players employ forward press for improved rhythm. The Double Bend magnifies this feel.
Naturally setting the hands ahead at address makes the forward press motion feel more seamless. Enhanced timing boosts power.
This season, treat your putting to the revolutionary Double Bend shaft for more explosive roll and truer line. Optimized energy transfer gets putts rolling hotter and straighter toward the cup.
Lowers Your Launch Angle For Increased Speeds
As passionate golfers, we’re always searching for innovative new equipment that can elevate our game. One exciting product generating buzz right now is the Taylormade Double Bend putter shaft.
This uniquely bent shaft lowers your launch angle to increase rollout speeds and consistency. Read on for 15 compelling reasons to upgrade your flatstick with the Double Bend this season.
Positions Hands Below Equator at Impact
Ideal launch conditions come from impact just below the ball’s equator. The Double Bend encourages this optimal hand height.
Lowered hands brush the ball cleanly at the bottom of the arc for efficient compression and launch.
Promotes Downward Strike
A downward blow with forward shaft lean boosts launch efficiency. The Double Bend’s geometry creates forward lean.
Your enhanced angle of attack compresses the ball into the green for better energy transfer and velocity.
Prevents Scooping
Scooped shots with higher launch angles lose speed quickly. The Double Bend eliminates scooping.
The lowered clubhead bottoms out beyond the ball, ensuring crisp downward contact for ideal launch.
Maximizes Ball Compression
Greater ball compression off the face produces faster rollout. The Double Bend improves compression.
Steep angle of attack squeezes the ball against the green for maximum energy transfer into the roll.
Enhances Speed Control
Lower launch angles extend forward roll, letting you dial in pace better. The Double Bend helps control speed.
With shots running out farther, judging distances becomes easier. Consistent rollout improves touch.
Lessens Air Time And Hop
Higher launch angles make putts airborne longer, reducing motion. The Double Bend minimizes air time.
Putts quickly transition from launch onto the green, increasing time actually rolling. This extends forward momentum.
Improves Accuracy
Lower launch reduces variability in ball flight, tightening dispersion. The Double Bend boosts accuracy.
With precise impact and minimal air time, putts stay true to your intended line without off-line deviation.
Promotes Effective Skid-To-Roll Transition
Clean impact and reduced loft lessen skidding for smooth transition to rolling. The Double Bend optimizes transition.
Putts immediately begin rolling end-over-end to maintain velocity. No skidding means truer, faster rollout.
Maximizes Forward Roll Distance
Lower launch extends forward motion, enabling putts to finish near the hole. The Double Bend maximizes roll.
With shots staying grounded longer, you gain improved control approaching the cup. Putts finish right next to the pin.
Reduces Negative Launch Effects
Excessive loft exacerbates off-center hit launch problems. The Double Bend lessens these effects.
Even slight mis-hits maintain ideal launch qualities thanks to minimized loft. Consistency improves across the face.
Enhances Responsiveness
Lower launch provides instant feedback on strike quality. The Double Bend improves feel.
You gain an intuitive sense of impact crispness from enhanced touch and responsiveness off the face.
This season, upgrade your flatstick with the revolutionary Double Bend shaft to gain confidence in your putting speed control. Lowered launch angles get putts rolling farther and faster.
Easy To Switch From Your Existing Single Bend Shaft
As dedicated golfers, we’re constantly evaluating new equipment innovations that can take our game to the next level. One exciting new product generating lots of buzz is the Taylormade Double Bend putter shaft.
This revolutionary dual-curve shaft offers an easy upgrade from traditional single bend models. Read on for 15 compelling reasons to make the switch to the Double Bend this season.
Works With Your Existing Putter Head
The beauty of the Double Bend is you likely won’t need a new putter. It fits as a replacement shaft on many popular putter heads.
Order the Double Bend in the appropriate length and lie angle to seamlessly match your current putter model.
Quick & Easy Installation
Switching shafts takes only minutes thanks to the Double Bend’s universal construction. Simply unscrew and align.
A few twists of a wrench lets you swap shafts in the parking lot before a round if desired.
Dialed-In Custom Fitting
Fine tune the Double Bend’s length, lie, and offset to fit your specs and stroke perfectly through custom fitting.
Optimized just for you, the Double Bend syncing to your game takes performance to new heights.
Enhanced Alignment
The Double Bend’s dual alignment aids provide a big improvement over single bend putters limited sightlines.
Extra parallel and perpendicular lines ensure perfect alignment every setup for enhanced accuracy.
Better Distance Control
Smoother, more rhythmic motion contributed by the Double Bend gives superior touch and pace control versus single bends.
Dialing in distances becomes much easier with the enhanced tempo and feel.
More Consistency
Single bend putter shafts can twist on off-center hits, causing variance in results. The Double Bend minimizes twist.
Greatly improved directional consistency tightens shot dispersion for more holes made.
Proper Ball Positioning
The Double Bend consistently positions the ball in the ideal impact location through proper bend geometry.
Correct ball position leads to solid center contact for optimal launching on every stroke.
Purer Roll
Single bend designs are prone to face rotation, hurting roll quality. The Double Bend promotes smooth roll.
With no manipulation through impact, putts immediately begin rolling purely end-over-end.
Enhanced MOI
Off-center hits lose energy with single bends. The Double Bend provides more perimeter weighting for improved MOI.
Expanded sweet spot maintains ball speed and reduces twisting on mishits.
Ideal Launch Conditions
Varying face angles and sole contact from single bend shaft twisting lead to inconsistent launch. The Double Bend optimizes launch.
Precise impact alignment shot to shot produces ideal launch metrics for superior rolling.
Easier to Square Face
Single bends require manipulating the face square at impact. The Double Bend sets the face angle automatically.
Eliminating the need to actively rotate the face simplifies producing solid center strikes.
This season, upgrade your putting performance by switching to the revolutionary Taylormade Double Bend shaft. All the benefits of alignment, consistency, feel and forgiveness make it a valuable replacement for your single bend model.
Could Take Your Putting To The Next Level This Season
As passionate golfers, we’re always on the lookout for innovative new equipment that can give us an edge on the greens. One exciting product generating lots of buzz right now is the Taylormade Double Bend putter shaft.
This revolutionary dual-curve shaft provides a host of performance benefits that could take your putting to new heights this season. Read on for 15 compelling reasons why the Double Bend may be the key to transforming your scores.
Enhances Alignment and Accuracy
Clear parallel and perpendicular sightlines on the Double Bend make alignment more precise. Squaring the face becomes easier and more repeatable.
Precise aim leads to enhanced directional accuracy. Your improved starting line helps you hole more putts.
Lessens Face Rotation
A big source of inconsistency is the face twisting open or closed at impact. The Double Bend virtually eliminates face rotation.
With the face staying square to your intended line longer, putts launch and roll out truer to boost made putts.
Prevents Pushing and Pulling
Putts that veer off-line right or left can be extremely frustrating. The Double Bend straightens out your stroke to prevent pushed and pulled shots.
Your swing path stays on-line to send putts rolling end-over-end directly at your target without curvature.
Improves Pace Control
Inconsistent speed leads to lagged and blown putts. The Double Bend enhances your distance control and feel.
Thanks to superior rhythm and reduced deceleration, you gain confidence in calibrating touch and speed.
Quiets Wrist Action
Excess wrist hinging and manipulation is a common fault hurting consistency. The Double Bend minimizes wrist motion.
With your hands and arms staying quiet, a smooth pendulum motion creates improved direction and distance control.
Dials In Ball Positioning
Inconsistent ball placement leads to erratic contact and quality. The Double Bend positions the ball perfectly every setup.
Ideal forward ball position facilitates consistently crisp contact to enhance performance and feel.
Provides Enhanced Alignment Versus Blades
It can be tricky aligning blades accurately at address. The Double Bend makes setup easy.
Highly precise aim combines beautifully with blade feel for phenomenal improvement on the greens.
Lessens Anxiety
Doubts about direction and speed breed tension on the greens. The Double Bend delivers confidence.
By inspiring faith in your starting line and touch, anxiety and fear get replaced with trust in your stroke.
Eliminates Numbing Vibration
Off-center hits can send unpleasant vibrations into your hands, disrupting feel. The Double Bend dampens vibration.
With no torque or twisting, you experience pure, uninterrupted feel to read greens better.
This season, be sure to check out the Taylormade Double Bend putter shaft. With enhanced alignment, accuracy, and touch, it could be the breakthrough product that unlocks your putting potential and takes scores lower.