Lacrosse Goal Safety Tips
Setting up a Wolf Athletics lacrosse goal in your backyard is an exciting way to practice lacrosse skills at home. However, proper safety precautions should be taken to prevent injuries while using your lacrosse goal post. Following some basic safety tips can help ensure your lacrosse practices are accident-free.
First, be sure to carefully read through the entire lacrosse goal assembly manual before beginning construction. Wolf Athletics lacrosse goals come with detailed instructions for proper assembly, anchoring, and use. Taking the time to thoroughly understand each step can prevent mistakes that could lead to a goal tipping over or collapsing. You should also closely inspect all lacrosse goal parts when unboxing to check for any defects or damage. Avoid using any pieces that are bent, cracked, or otherwise compromised.
Correct anchoring is critical for lacrosse goal safety. Wolf Athletics goals include ground anchor stakes that should be utilized each and every time the goal is set up. Hammering the anchors fully into the ground on both sides helps stabilize the goal and prevent tipping. For even greater stability, you can purchase additional weighted anchors to use in conjunction with the included stakes. Trying to use your lacrosse goal without proper anchors substantially increases the risk of accidents and injury.
Set up your Wolf Athletics lacrosse goal on level terrain free of holes, roots, rocks, and other tripping hazards. An uneven surface could cause instability issues. You’ll also want to carefully measure and allow for the appropriate clearance space around the goal according to the manufacturer recommendations. Setting up too close to buildings, fences, overhanging branches or other obstructions creates safety risks.
Inspect the netting before each use to check for wear, tears, or looseness. Damaged or excessively loose netting affects ball rebound and containment. Replacement lacrosse goal nets are available from Wolf Athletics. Also check for structural integrity and signs of rust or damage each time the goal is assembled. Do not use a goal that appears structurally unsound.
Use extreme caution when adjusting the goal height or folding and unfolding the goal, as finger or hand injuries could occur. Keep hands clear of pinch points and do not allow anyone to cling to or hang on the goal posts. It’s best to have two people work together to raise, lower, fold, or unfold your lacrosse goal.
Always supervise children closely when a lacrosse goal is set up and never allow horseplay or climbing on the structure. Additionally, remove lacrosse balls from the goal when not in use to prevent potential injury from falling balls. Consider using ball stop netting on adjacent fencing or buildings to contain errant shots.
During thunderstorms, fold down and anchor your Wolf Athletics lacrosse goal or move it into a garage or shed. High winds could blow an empty goal over, while lightning strikes could electrify the metal goal posts. Don’t allow play until weather conditions improve.
By following these lacrosse goal safety recommendations, you can confidently enjoy honing your lacrosse skills using your Wolf Athletics goal. Just be sure to prioritize safety at all times when setting up, using, and maintaining your backyard lacrosse goal post.
Durable Steel Lacrosse Goal Construction
Wolf Athletics designs their lacrosse goals for rugged durability to withstand repetitive play. The main goal frame consists of heavy-duty steel tubing that resists rust, cracking, and bending. The precise engineering provides professional-quality strength to absorb hard lacrosse shots while minimizing vibration.
The main beams utilize thick 1.9-inch steel tubing with a 1.5mm wall thickness for maximum stability. Lesser goals may use thinner 1.2-inch tubing that doesn’t have the same rigidity. Connecting joints are welded both inside and out for a solid, non-moving joint. Some competitors merely plug together frame sections without fully welding interior joint seams.
Tough powder coating covers the steel goal tubing to help resist scratches, UV damage, and corrosion. Zinc phosphate undercoating provides an added layer of protection against rust. Padding vinyl coating on the frame stands up to abuse from weather and missed lacrosse balls. The durable construction prevents sharp edges that could cut hands and arms.
For the lacrosse goal backstay supports, Wolf Athletics uses a heavy 1.5-inch 16 gauge steel tubing capable of withstanding significant rearward pressure. The backstays attach with clamps and metal fasteners for adjustable yet ultra-secure mounting. Other lacrosse goals often skimp on materials for the backstays, leading to breakage.
The slide lock mechanisms allow smooth raising and lowering of the adjustable goal height settings. The internal steel shafts and locking pins are metal, not plastic, for reliability. Robust steel brackets hold the slide locks firmly in place on the goals. Some competitors use plastic locking mechanisms prone to cracking and failure under pressure.
Welded bottom crossbars provide enhanced goal base stability, preventing the bottom frame rails from splaying outward. In addition, the complete 4-foot by 4-foot square base gives maximum resistance to tipping. Many less rugged lacrosse goals have smaller 3-foot by 3-foot or 3-foot by 4-foot bases that are more prone to tipping over during play.
For the net attachment system, Wolf Athletics lacrosse goals utilize strong 0.25-inch braided polyethylene rope that won’t fray or break down from weather exposure. Lesser lacrosse goals may have mere bungee cords or plastic net attachments inadequate for containing high-velocity lacrosse ball shots. The rope threads through the entire frame for complete ball retention.
Even details like the welded nut rail, zinc-plated spring clips, and steel ground anchors demonstrate Wolf Athletics’ attention to sturdy construction. From top to bottom, the lacrosse goals are engineered for ideal playability, safety, and longevity. Choosing heavier gauge steel tubing makes Wolf Athletics goals highly resistant to deformation from repetitive lacrosse ball impacts.
When you consider the pounding a home lacrosse goal will take from missed shots, checks, errant passes, and more, durability should be a top priority. Wolf Athletics lacrosse goals are purpose-built to handle aggressive backyard play thanks to smart design choices using rugged, thick steel. Investing in their stronger goal construction will pay off for years of safe enjoyment.
Adjustable Lacrosse Goal Height
A key benefit of Wolf Athletics lacrosse goals is the ability to adjust the height from regulation men’s height down to youth levels. This height adjustability makes their lacrosse goal versatile for players of all ages and skills.
Wolf Athletics designs their lacrosse goal frames to allow height changes from the standard 6 feet tall down to 4 feet. The range of heights accommodates youth teams from U15 all the way to U8 levels. Players can practice shooting on a goal matched to their appropriate size and skill grade.
To adjust the height, dual chrome-plated steel slide locks on the rear goal posts disengage the locking pins when pressed. This allows the upper goal frame to smoothly slide up or down within the vertical tubing supports. Releasing the slide lock buttons then re-engages the lock pins at the desired height setting.
Precise adjustment holes along the vertical goal supports allow setting the crossbar at the exact official height for that age level. Height settings are adjustable in 6 inch increments to fine tune placement. So whether you need to set it at 8 feet for a high school women’s team or 4 feet for U8 youth, you can dial in the perfect height.
Because the slide lock system includes eight locking pin positions on each post, the range of height settings is impressive. You can set a regulation 10 foot box field lacrosse goal height all the way down to 4 feet tall in 6 inch increments. Dual independent slide locks ensure both sides are level.
The slide lock system provides a quick yet secure locking mechanism. Steel locking pins drop easily into adjustment holes without requiring tools. Some competitors’ goals use cumbersome bolt-through pin designs that are slow and tedious for height changes.
Choosing an adjustable height lacrosse goal maximizes your investment by extending useful life as your kids grow. The slide lock system makes it simple to raise the crossbar height each season as they progress to the next level. Kids take pride in finally being tall enough to shoot on a full size 6 foot goal.
For multi-child families, an adjustable lacrosse goal allows kids of different ages to each practice on a height appropriate for their skills. Neighborhood teams can tailor goal height for age diversity too. The universality reduces arguing over height settings.
Newer players often benefit from starting at lower goal heights to build confidence. As skills improve, the goal height can gradually increase to add challenge. Incremental height adjustments keep things within reach but still make players work hard.
During solo shooting practice, adjusting the goal down forces you to fine tune shooting accuracy. The small targets challenge precision. Working back up to full height then seems easy by comparison. The change of pace keeps solo practice interesting.
Ultimately the flexibility of an adjustable height Wolf Athletics lacrosse goal empowers you to customize setup for ideal training. Dialing in the perfect crossbar height for players’ size and ability level enhances skill development. Then adjust again as kids grow for years of continuous backyard practice.
Portable Lacrosse Goal with Wheels
One great benefit of Wolf Athletics lacrosse goals is their portability for easy mobility. Built-in wheels and a folding design allow you to reposition the goal anytime.
Wheels mounted at the rear base corners enable a single person to tilt back the goal and roll it to a new spot. Smooth-rolling wheels traverse grass, blacktop, concrete, or turf surfaces with ease. The rear-only wheels ensure the goal remains fully stable during play.
Take advantage of the portability to relocate your lacrosse goal as needed. Roll it closer to the back porch for convenient access before practice then move it across the yard when friends come over to maximize play space. Change shooting angles by moving the goal frequently.
You can also transport a Wolf Athletics goal to other locations for games and practice on the go. Collapse the frame, lay it in a truck bed, then set it up anywhere another field is available. Take it to the park, schoolyard, or sports camp for impromptu practice sessions.
The ability to quickly roll the folded goal inside the garage or shed for storage keeps it safely out of the elements when not in use. Then roll back out and anchor down for action-packed lacrosse action when ready to play.
For multi-sport families, repositioning the lacrosse goal quickly lets you free up yard space for other sports like football, soccer, or baseball in different seasons. Wheel the goal out of the way against a fence line to open up a playing area when needed.
Portability also makes it easy to remove the lacrosse goal anytime you need access to the turf underneath for lawn maintenance like aerating. Just wheel it aside then bring it back once the task is complete. No need for a complex disassembly process.
The effortless mobility helps when mowing and trimming the grass around your lacrosse goal too. Simply tilt and roll the goal to the edge of the yard, mow the area, then roll it back into position. Beats having to mow around a stationary goal.
If you have multiple portable lacrosse goals, quick repositioning lets you set up shot passing drills or simulated game play. Vary the goal spacing and angles for dynamic practices. Move the goals together for 2 vs. 2 competitions or spread them apart for fast break shooting.
Friends and teammates enjoy being able to easily vary the practice experience simply by relocating the goals around the yard or field. The goals become more interactive and engaging when portable.
Wolf Athletics’ smooth-rolling in-ground or popup wheels make transport easy for one person. Just remember to always re-anchor the goals firmly after moving to a new position. Enjoy the flexibility that portable lacrosse goal mobility provides.
UV and Weather Resistant Lacrosse Goal
Wolf Athletics thoughtfully designs their lacrosse goals to withstand exposure to sun, rain, snow, and temperature extremes. UV-resistant and weatherproof construction allows the goals to live outdoors year-round.
Starting with the steel tubing frame, a zinc phosphate undercoating protects against corrosion and rust. The weatherproof undercoating allows the steel goal frame to withstand moisture from rain and snow without degradation.
Powder coated paint covers the steel tubing to resist scratches and UV damage. The tough finish won’t chip, peel, or fade even under intense sunshine. Thick padding vinyl on high-impact areas also resists UV rays in addition to adding safety.
Marine-grade DuPont net rope survives outside conditions through sun, wind, rain, ice, and snow. The durable braided construction won’t unravel from weather exposure. And the all-weather net remains flexible even in frigid temperatures.
For the slide lock height adjustment system, industrial strength chrome plating protects the internal steel shafts from moisture and dirt. The chrome finish maintains smooth telescoping function rain or shine. Zinc-plated hardware avoids corrosion.
At connection joints, interior welds seal out water to prevent rusting from the inside out. Exterior welds also withstand wet weather thanks to zinc phosphate undercoating below the powder coated paint.
The backstay support bars feature tough rubber grommets where they insert into the goal frame. The flexible grommets accommodate temperature fluctuations without cracking while sealing out moisture ingress.
Once assembled, the entire lacrosse goal structure is designed for water runoff. Rain drains quickly through the open frame rather than pooling on horizontal surfaces. Angled design elements prevent flat spots that could hold standing water.
Wolf Athletics understands that an outdoor lacrosse goal needs to handle year-round weather patterns. The UV resistant materials and construction avoid the rapid deterioration some competitors’ goals experience.
Proper anchoring also helps the goal withstand wind, rain, and storms. The included ground stakes keep the goal firmly planted through inclement weather. Optional heavy-duty anchoring systems provide even more stability in high winds.
For convenience, built-in wheel mobility makes it easy to quickly roll the goal into a garage or shed if extreme weather is imminent. Then roll back out once the storm passes to resume lacrosse practice.
Don’t let worries about durability in outdoor conditions stop you from buying a Wolf Athletics lacrosse goal. Their meticulous design stands up to years of sun, wind, rain, ice, and snow. Enjoy hassle-free weatherproof performance season after season.
Lacrosse Goal Net Included
Conveniently, Wolf Athletics lacrosse goals come complete with a high quality UV treated goal net included. You don’t have to buy the net separately like some competitors require.
The included all-weather net uses a durable high-density 2mm polyethylene material resistant to UV damage, rot, and mildew. The heavy-duty construction holds up to missed shots and doesn’t easily sag.
The offset knotless netting provides excellent ball rebound and containment. Knotless nets have better bounceback than traditional knotted nets which can have uneven rebound off the knots. Less lacrosse ball glancing preserves shooting rhythm.
For longevity, the net attaches fully around the goal frame with weatherproof 0.25-inch braided rope rather than elastic cords or bungees prone to breakage. The rope threads completely through the frame for uninterrupted attachment from top to bottom.
This continuous net attachment prevents the net from easily loosening or sagging over time. Some competitors’ goals have fragmented net attachments allowing the net to separate from the frame.
The knotless netting features a 1.5-inch diamond mesh size optimal for ball control. Smaller 1-inch box nets used on some goals allow erratic rebound. Larger mesh nets also don’t retain smaller lacrosse balls as well.
For safety, the net overhangs the entire 4-foot by 4-foot goal frame to fully contain outbound shots. Side net containment helps prevent ball scattering and retrieval effort.
Having a full lacrosse goal net included allows you to start playing immediately after setting up the frame. You won’t have to purchase a separate net or deal with trying to install your own net.
Wolf Athletics nets come pre-attached for quick simple installation right out of the box. Just untie one end of the rope, unfold the net around the goal, then retie the rope end to complete the loop.
The offset knotless polyethylene netting provides true ball rebound, durable weather resistance, and secure full frame attachment. Built to handle high velocity shots from all lacrosse stick types without premature replacement.
Since the UV-treated net is designed specifically for Wolf Athletics goals, you know it will fit properly right away. There’s no guessing whether an aftermarket net will perfectly suit the frame size.
Don’t settle for low quality nets prone to sagging, weather damage, and broken cord attachments. Wolf Athletics completes the package with a high-end goal net included ready for backyard lacrosse action.
Lacrosse Goal Ground Anchors
Proper anchoring is crucial for lacrosse goal stability and safety during active play. Wolf Athletics includes heavy-duty ground anchors with each goal to keep them firmly planted.
The main anchor system uses two 36-inch long steel ground stakes on opposing sides. The angled stakes hammer into the turf to counteract rearward tipping pressure. Anchors must be utilized each and every time the goal is set up.
Longer stakes sunk fully into the ground provide significantly more holding power than smaller 24-inch stakes some competitors include. The greater depth keeps the goal locked in place despite impact forces from play.
For even stronger anchoring, Wolf Athletics offers large auger-style spiral anchors as an optional accessory. Rotating the corkscrew auger into the ground creates tremendous resistance to lifting or displacement.
Auger anchors place attachment points at the rear corners of the lacrosse goal frame for maximum leverage against tipping. Optional popup wheels lift the frame slightly to allow auger anchor installation.
Dual rear augers combined with forward ground stakes make the goal virtually immovable. The auger design also removes easily after use with just a partial counter rotation.
Make sure installed ground anchors are positioned snugly against the goal frame with no slack in the attachment strap. Loose anchors reduce effectiveness allowing more goal movement.
Check anchors regularly for any loosening and re-hammer them in. Anchoring tends to weaken over time as the ground naturally compacts after repeated hammering.
For indoor use, temporary counterweight bags can replace ground anchors. Fill duffle bags with sand and hang them from the goal’s rear anchor points to mimic ground stakes.
The included 36-inch ground stakes are long enough to sufficiently anchor the goal frame in most conditions. But upgrading to auger anchors may be advisable for especially loose soil or frequent heavy winds.
Be sure to carefully follow Wolf Athletics’ instructions for proper ground anchor installation positioning and techniques. Proper anchoring is too crucial to shortcut.
Ideally have two adults work together anchoring the goal frame. One person can steady the frame while the other installs anchors to reduce risk of mishaps.
With diligent ground anchoring, the Wolf Athletics lacrosse goal sturdily withstands aggressive backyard play. But remember anchors are required each and every time for safety. Don’t allow use without anchors.
Lacrosse Goal Folding Design
Wolf Athletics engineered their lacrosse goals with an innovative folding design for compact storage and transportation convenience.
To fold the goal, simply disengage the slide lock buttons and lower the upper goal frame until horizontal. Then release the lock pins on the side elbow joints allowing the joints to pivot inward.
This retracts the upper frame section into a compact folded position aligned above the base. Disengaging the backstay support bars enables the frame to fold fully flat for storage.
Folded down, the lacrosse goal frame easily maneuvers through standard doorways for indoor storage. The folded size also fits inside most vehicle cargo areas.
Wolf Athletics’ folding goal design makes storage and transportation easy versus complex disassembly of fixed rigid frames. Just lower, release the elbow joints, fold the backstays, and collapse into a portable package.
For upright folding, keep the elbow joints locked and fold the backstays forward. This folded profile lets you stand the goal vertically against a wall for compactness.
The folding functionality allows quick storage in limited spaces like garages, sheds, closets, or under patio decking. Unfold the goal only when ready for use to avoid cluttering yard space.
Collapsing the frame also provides easy ground access beneath the goal for turf maintenance. Mow, aerate, power rake, and tend turf without moving a bulky rigid goal frame.
Fold down the goal when not in use for extended periods like winter months. Storing folded minimizes exposure to snow, ice, and moisture compared with leaving erected.
For transportation, the folded lacrosse goal design accommodates large SUV, minivan, and pickup truck cargo areas. Bring it along collapsed to set up on fields at other locations.
Carrying folded is much easier than hauling a fixed rigid frame. Fewer hands are needed to manage the lighter compact load.
When loaning out your Wolf Athletics goal, require borrowers to fold down the frame before transport for everyone’s convenience. It also protects against damage compared to moving erected.
Be sure to engage all lock releases and joints to completely flatten the lacrosse goal frame when folding. Never attempt to fold only partially.
Overall the folding goal functionality enhances portability for transportation, seasonal storage, and turf access. Just unfold and anchor on site whenever ready for lacrosse action.
Lacrosse Goal Assembly Time
Wolf Athletics thoughtfully engineers their lacrosse goals for quick, straightforward assembly so you can start playing sooner.
Expect approximately 90-120 minutes assembly time for two adults working together. Well-documented instructions with diagrams guide you through each assembly step in proper order.
All required hardware like nuts, bolts, washers, and snap pins come packed right in the box. Helpful tips assist first-time assembly to get it right the first try.
Start by identifying and separating all steel tubing segments. Match the sticker codes on each piece to the instructions diagram for foolproof parts positioning.
Attach the universal joint connector plates at the prescribed tube insertion depth. Precise plate alignment prevents twisting and distortion.
Use provided snap pins to secure joints during assembly. Snap pins allow tool-free fastening and future disassembly compared to bolted joints.
Bolt together the horizontal crossbars and vertical supports to complete the main lower goal frame. Check for 90 degree angles at all joints before tightening bolts.
Carefully level and support the lower frame upright before proceeding. Use pieces of wood or concrete blocks to evenly hold the base steady.
Next, lift into place the upper frame crossbar and attach to the upright supports using the slide lock height adjustments. Keep hands clear of pinch points when merging sections.
Mount the backstay support bars at the proper frame depths indicated. Securely fasten the backstay clamps without overtightening.
Unwrap the included UV-treated lacrosse goal net and loosely drape it over the frame. Then thread the braided rope ends fully through the tubing to tie off.
Finally, firmly anchor the goal frame in position before use. Utilize the provided heavy-duty ground stakes or auger anchors.
Check all joints, net attachments, anchors, and hardware after assembly to ensure proper installation before playing. Tug test for rigidity.
Wolf Athletics labels all parts clearly and packs hardware in labeled pouches to simplify assembly. Keeping parts organized streamlines the process.
Following instructions precisely results in square, leveled assembly the first time. Rushing or skipping steps leads to problems requiring disassembly.
Having an extra set of hands speeds assembly while also providing help lifting and stabilizing goal sections in place. Make it a two-person project.
Allow a little extra time your first assembly to get familiar with how the components interconnect. Future assemblies go faster with experience.
With Wolf Athletics’ intuitive goal design, you can expect hassle-free assembly in under two hours. Then enjoy years of play on your homemade lacrosse goal.
Lacrosse Goal Price Comparison
When comparing lacrosse goal pricing, Wolf Athletics provides an excellent value relative to competitors. You get premium quality and features without paying excessively high prices.
Pricing for a Wolf Athletics 6×6 lacrosse goal typically runs around $300-$350 depending on current promotions and shipping. This positions Wolf as an attainable mid-priced option versus bargain or commercial-grade goals.
Mass market Amazon goals from brands like GoSports cost $150-$250, but quality and durability is questionable. These goals may require frequent replacement so the value proposition is weaker.
High-end lacrosse goal brands like Gladiator and Power Shaft range up to $600+ for a premium backyard goal with included anchors and net. Great for intense club and college practice, but significant overkill for casual family use.
Considering components and features, Wolf Athletics goals offer professional quality at just half the price of elite-tier competitors. You get commercial-level strength without the huge price tag.
Thick 1.9-inch steel tubing resists deformation better than thinner frames costing less. Construction techniques like interior joint welds also boost durability beyond basic goals.
Ease of assembly, included UV net, adjustable height settings, folding design, and smooth-rolling wheels provide functionality lacking on lower-cost goals. Convenience and versatility add value.
Plus Wolf Athletics offers optional heavy-duty spiral anchors, bolt-on ball stop netting, replacement nets, and other accessories not typically available from discount brands.
When evaluating cost, account for useful life rather than just upfront pricing. A Wolf Athletics goal should provide 10+ years of play for a single purchase price. Disposable goals don’t last nearly as long before needing replacement.
Consider cost per hour of use. At 10+ years of play, a $300 Wolf Athletics goal spreads the cost over countless practices making the hourly usage cost extremely affordable.
There’s also peace of mind knowing your kids are safely playing on a rugged, tip-resistant goal. Cheaper goals jeopardize that confidence, especially as they deteriorate faster.
Ultimately at around $300, Wolf Athletics hits the sweet spot of professional-grade quality without inflated costs. Pay a little more upfront for a goal that outlasts flimsier options many times over.
Lacrosse Goal Warranty Information
Wolf Athletics demonstrates confidence in their lacrosse goal quality by backing each goal with generous warranty coverage.
Structural frame components like steel tubing, joints, and hardware are warranted for 10 years against defects and workmanship issues. That’s 5-10 times longer than competitors typically offer.
The extended warranty period provides peace of mind your investment is protected long-term. You can trust the goal won’t fail prematurely from flaws in materials or construction.
Netting and other accessories are covered for 12 months from the purchase date. So you’re covered if the included UV net shows any defects like premature unraveling in the first year.
Review all warranty details to understand what types of damage are covered versus normal wear and tear exclusions. Reasonable care and maintenance is required.
Note that surface rust on steel components falls under normal expected wear and is not covered. But structural degradation compromising integrity would be warranted.
Wolf Athletics does not warranty damage from weather events, improper use, lack of anchoring, overtightening hardware, or unauthorized modifications which void the warranty.
Always keep your original Wolf Athletics purchase receipt to prove date of purchase when submitting any warranty claims.
Before assuming a problem requires warranty service, carefully inspect for installation errors or minor fixes you can remedy yourself. Many concerns stem from improper assembly or maintenance.
However, for defects in original materials and construction quality, Wolf Athletics’ 10-year frame warranty provides satisfactory remedy. The long coverage period demonstrates their faith in product engineering.
The warranty applies only to original owners and is not transferable. Secondhand goals purchased used have no warranty remaining.
Review all documentation for proper claim submission procedures if an issue arises. This typically involves contacting Wolf Athletics by email for diagnosis of the problem and proof of purchase date.
For qualified issues, Wolf Athletics will provide replacement parts or authorize repairs by approved vendors. Shipping costs may apply.
Before buying any lacrosse goal, understand the warranty coverage differences between brands. Wolf Athletics leads with generous 10-year frame construction assurances.
Lacrosse Goal Safety Tips
Maximizing safety should be the top priority when setting up and using any lacrosse goal, including Wolf Athletics models. Keep these tips in mind.
Carefully read all assembly instructions to avoid construction errors that could lead to instability. Improper installation jeopardizes safety. Have two capable adults work together for best results.
Always check that joints are tightened securely without strips or gaps. Loose joints allow frame movement and increase risk of collapse or tipping during play.
Utilize all provided anchors and ground stakes every time the goal is set up. Anchors are absolutely vital for counteracting tip forces. Never attempt to use unanchored.
Consider installing heavy-duty auger anchors for extremely sturdy anchoring. Augers provide maximum resistance to goal tipping or sliding.
Leave ample safe clearance space around the erected lacrosse goal according to manufacturer specifications. Collisions with tight obstructions increase hazards.
Check net attachment ropes regularly for any loosening or fraying. Re-secure loose net ropes to avoid openings that could deflect shots inaccurately.
Inspect the goal frame periodically for signs of damage including cracks, dents, splits, or rust corrosion. Do not use goals that appear structurally compromised.
When adjusting goal height or folding the frame, use care to avoid finger or hand pinching in moving components. Assign children a safe distance away from the goal during adjustments.
Ensure sufficient adult supervision whenever children are playing on or near the lacrosse goal. Do not allow horseplay like hanging, climbing, or shaking the goal.
Remove lacrosse balls from the goal netting when not in active use to prevent potential injury from falling balls to passersby.
During storms, fold down the goal frame or move indoors to prevent wind or lightning hazards. Check for damage before returning to use after storms.
Maintain safe buffer space around the goal mouth during shooting practice. Errant shots could rebound or deflect dangerously off goal pipes.
When moving portable lacrosse goals, lift fully upright and control slowly. Tilting goals awkwardly risks frame damage and instability.
By emphasizing safety first, you can confidently enjoy years of recreational and competitive lacrosse action using Wolf Athletics goals.
Lacrosse Goal Drills and Practice Ideas
Having your own Wolf Athletics lacrosse goal opens up countless drilling and practice possibilities right in your backyard.
Work on shooting accuracy and power by declaring different scoring zones on the goal. Challenge yourself to hit top corners, low targets, or narrow areas between pipes.
Practice sidearm sweep shots and behind-the-back shots for maneuvering around defenders. Also try bounce shots aimed underside the crossbar.
Set up a shooting rotation with a partner. Trade rapid shots from either side, working on receiving and releasing quickly with proper form.
From behind the goal, toss balls out front and work on quick scooping ground balls and transitioning immediately into crisp shots on goal.
For conditioning, do suicide sprints where you have to fully sprint, stop and touch a pipe, then sprint back and touch a starting point. Repeat to build stamina.
Shoot a set number of balls aiming specifically for pipes to improve accuracy. The small pipe targets require precise shot placement.
Have a partner stand adjacent holding their stick up as a defensive obstacle. Practice dodging and shooting around their stick while aiming for goal.
Test reaction time by having a partner roll balls randomly from behind the goal for you to react, scoop, and shoot quickly before the next one comes.
Work on ball handling by weaving in and out around goal pipes while cradling the ball and maintaining control at speed.
Lower the goal height incrementally as you make shots to force disciplined mechanics. Raising it back up then feels easy.
For goalies, take shots aiming for tough angles like low corners. Work on quick lateral movements and stick positioning to save tricky shots.
Try behind-the-back passing with a partner moving the ball rapidly around pipes and looping back to score goals. Develop quick release passing.
Use cones or spare sticks spaced at intervals leading to the goal for obstacle dodging drills before shooting on goal.
With a Wolf Athletics goal in your own yard, you can creatively practice all kinds of drills tailored to your skill development needs.
Lacrosse Goal Maintenance
Performing proper maintenance extends the service life of your Wolf Athletics lacrosse goal and ensures safe enjoyable play.
Check all structural connections regularly, especially after initial assembly and periods of non-use. Tighten any loose bolts or hardware.
Inspect the netting for signs of wear including thinning, holes, tears, and UV damage. Replace nets that become compromised to avoid errant ball ejection.
Routinely check net attachment ropes for any loosening or fraying. Re-tie and tighten rope ends as needed to avoid sagging.
Test slide lock adjustments periodically by releasing and re-locking at various heights. Lubricate with silicone spray if sliding action becomes stiff.
Touch up any chips or scratches in the powder coated finish to prevent corrosion underneath. Spot paint to match the original finish.
Check ground anchor stakes each usage for looseness and re-hammer in as necessary. Anchors tend to work loose over time as soil compacts.
Wipe down goal pipes as needed with a damp cloth to remove accumulated dirt, sap, pollen, and bird droppings to prevent goal net staining.
Avoid using solvent cleaners on frame tubing that could damage the protective powder coated finish. Mild soap and water is best.
For portable goals, periodically inspect wheel axles and confirm wheels spin freely without wobbling. Lubricate bearings as needed.
When not in use for extended periods, disassemble the lacrosse goal and store indoors away from the elements. Avoid excessive weathering.
Check that backstay support bars remain straight without bending. Straighten or replace bent bars to maintain goal frame integrity.
Remove lacrosse balls from the goal netting after practices and games. Leaving balls in place strains netting unnecessarily.
Avoid leaving lacrosse goals outside through winter if possible. Prolonged exposure to snow and ice accelerates wear.
At least annually, fully disassemble the goal and inspect all parts closely for damage. Make repairs before problems worsen.
With proper care and maintenance, a Wolf Athletics lacrosse goal should provide many years of safe family entertainment.
Top Wolf Athletics Lacrosse Goals
Wolf Athletics offers several excellent lacrosse goal models to choose from. Here are some of their top options.
The Storm Series lacrosse goal provides their signature quality at an affordable price point. The 60”x60”x72” size is ideal for high school and college players. Thick 1.9” steel tubing resists deformation while powder coating protects from rust. Slide lock adjustable height settings, folding design, included UV net, and integrated wheels provide full functionality.
For wider play, the Thunder Series goal increases width to 72” across. The extra 12 inches of shooting space accommodates beginner inaccuracy while still meeting NCAA size guidelines. Otherwise identical durability and convenient features as the Storm goal make this a top choice.
The Lightning Series model offers Wolf Athletics premium lacrosse goal construction. Massive 2.5” steel tubing withstands collegiate-level power shooting. A rigid triangle base further enhances stability. Pro-style features like composite crossbars, wrap-around net attachment, and UV-reflective powder coating justify the higher cost for advanced players.
The Blizzard Series goal incorporates a curved runback design moving rear supports forward for unobstructed ball circulation. Excellent for tight backyard spaces or working on tight behind-the-goal plays. Wraparound net attachment, 1.9” steel frame, slide lock height adjustments, and integrated wheels retain Wolf’s quality reputation.
For elite NCAA, club, and high school teams, the Hurricane Series lacrosse goal excels. Prominent 2”x4” steel uprights and interior crossbar supports deliver uncompromising rigidity for aggressive full-field play. Premium options like aluminum crossbars, breakaway bases, and injection molded elbow joints make these goals ready for any competitive level.
Youth lacrosse players will love the Tornado Series goal sized down to a 4’x4’ footprint. 60” height accommodates 12U levels while slide lock adjustability enables lowering for younger ages. Strong 1.5” steel tubing folded into a 48”x48”x60” frame makes an ideal starter goal.
The Cyclone Series goal incorporates a unique twisted frame design adding strength through triangular stability. The contemporary asymmetrical look also adds backyard flair. With the same durability and versatility expected from Wolf Athletics goals, the Cyclone is on-trend.
For indoor sports facilities, the Twister Series goal offers top quality in a wall-mount model. Folding brackets allow the goal to mount flush when not in use then pull down for action. Foam padding, 3’ runback spacing, and included net maximize function.
Across all models, Wolf Athletics provides excellent construction, smart features, and lasting value. They offer a perfect goal for every age, skill level, budget, and setting.