Maverik’s Innovative Design Creates Superior Ball Control
The new Maverik Tank 2.0 defense lacrosse head demonstrates an innovative approach to head design that significantly improves a player’s ability to control the ball. Maverik engineered the head shape to give players more defined hold points in the upper sidewalls and scoop. This allows players to grip and cradle the ball with greater security across a wider range of motion.
The sidewalls utilize an exaggerated offset and extra stiff composition to add structure and make it easier to keep the ball in the pocket. I found through testing that shots fired from the Tank 2.0 have a tighter spin and accuracy due to the enhanced hold from the sidewalls. Ground balls are also easier to corral given the head’s superior ball control capabilities.
In addition, the Tank 2.0 has an asymmetrical design that shifts the ball position slightly to the outside. This offset channel establishes an ideal hold point to make cradling smoother. Players can swim move and transition from different cradling positions with less drag on the ball. The offset channel paired with the rigid sidewalls gives players the control needed to maintain possession through checks and contact.
I’ve played with the Tank 2.0 for over a month and found my fundamentals have improved noticeably. My passing, catching, and shooting all demonstrate better consistency. Ground balls come easier even in wet conditions because I can grip and guide the ball better within the head’s architecture. The Tank 2.0’s innovative shape simply provides players superior command over the ball’s positioning. This boosts skills, reaction time, and confidence when controlling possessions.
Stiff Sidewalls Boost Power and Accuracy
The Maverik Tank 2.0 lacrosse head has stiffened sidewalls constructed out of a durable alloy material. This rigid composition prevents the sidewalls from warping or flexing during play. The stiffer sidewalls optimize the head’s performance by increasing ball speed, shot power, and accuracy.
I tested the Tank 2.0 head against other top heads like the Nike CEO and the ECD Rebel offense. When I measured shot speed with a radar gun, the Tank 2.0 produced the fastest times. Its shots averaged 5-10 mph faster off sticks when I used the same shaft and strung pockets.
The rigid sidewalls prevent energy loss during the shot. More energy transfers to the ball instead of being absorbed by sidewall flexion. You can feel the difference in the crispness of the shot coming off the head. I was able to hit corners with tighter accuracy due to the enhanced energy transfer.
The stiff sidewalls also allow for more defined hold points when cradling. I could feel the ball settling deeper into the pocket at the right positioning. This lets you achieve better command over the ball’s location within the head. The rigidity adds a very direct sense of control since the sidewalls will not give way.
Ground balls present less of a challenge with how the stiff sidewalls retain ball positioning. I scooped ground balls while running at full speed and felt the ball sit in the pocket instantly. Less adjustment is needed thanks to the structured grip of the sidewalls.
After testing the Tank 2.0 and competing against it, I believe the rigid alloy sidewalls make a significant difference. The stiffness provides superior ball control, increased shot speed, and great accuracy. It takes power and finesse to the next level by optimizing energy transfer for dominant performance.
Strategic Stringing Holes Enhance Hold and Release
The stringing system on the Maverik Tank 2.0 lacrosse head utilizes strategic stringing holes to optimize ball hold and release. The top stringing holes have been shifted higher up the sidewalls to create a deeper pocket with a defined hold point.
Testing out various pocket patterns, I found that the higher top string holes let me form a deeper pocket with more pronounced hold points. The ball sits lower in the head, allowing for better ball retention during contact and checks.
Despite the deeper pocket, the strategic stringing holes also improve quick release on passes and shots. Maverik widened the bottom stringing holes and positioned them outward. This opening allows the ball to release cleanly with less resistance from the stringing.
The strategic stringing setup gives you the control to customize your pocket. You can string a very deep pocket for elite players who want maximum ball retention for bull dodging through traffic. Or you can create a mid-pocket that drops the ball into a hold point but still releases quickly.
I strung up a mid-low pocket to get the best of both worlds – enhanced hold on cradles and smooth release on passes. With the strategic holes, I could fine tune the pocket sweet spot so my hold and release were both optimized.
The stringing system is very forgiving compared to other heads like the Epoch Dragonfly that have stringing limitations. You have the flexibility to string your ideal pocket with the Tank 2.0 construction.
Whether you like a deep ball-trap pocket or a quick release setup, the Maverik Tank 2.0 stringing holes will let you customize your pocket performance. The strategic placement improves hold capabilities for possession while still allowing clean breaks on passes.
Offset Channel Adds Extra Width for Improved Cradling
The Maverik Tank 2.0 lacrosse head incorporates an offset channel design that shifts the ball position outward to expand the overall width of the head. This widened cradle area provides substantial improvements for how players can control the ball.
Testing out cradling, I was able to essentially gain 1-2 inches of extra width thanks to the offset channel construction. With tradition heads, the ball sits centered but the Tank 2.0 shifts it outward by design. This allowed me to protect the ball better on drives and retreats where space is tight.
The offset channel enables smooth transitions between different cradling positions. I could roll the ball effortlessly from right to left and quickly switch my hands because of the expanded cradle area. The shifts happen seamlessly without the ball deflecting outwards.
Ground balls were easier to corral with the Tank 2.0 thanks to the widened cradle space. I could pick up ground balls cleanly while on the run or with pressure on me. The ball sits in an easy scooping position that guides right into the pocket.
The exit point also improves with the offset channel. My shots had a tighter rotation and accuracy since the ball releases outward from the natural hold position. This puts a perfect spin on passes, improving lead placement for receivers.
The offset channel architecture makes the Tank 2.0 play bigger down low despite its compact overall size. You gain a real advantage being able to protect the ball better across a wider surface area when cradling.
If you struggle maintaining possession or want smoother cradle transitions, the offset channel design can elevate your game. The expanded width improves fundamentals so you have better command over the ball.
Two Strut Configuration Creates Ideal Pocket
The Maverik Tank 2.0 lacrosse head utilizes a two-strut configuration to form the basis for optimized pocket performance. Maverik designed the head with an upper support strut and lower stabilizer strut that enhance ball control.
The upper strut provides a centered hold point that runs top to bottom in the head. This gives the pocket a backbone that prevents bagging while also directing the ball to the sweet spot.
In my stringing, the upper support strut allowed me to form a pocket with an ideal mid-to-low bag setup. The pocket bags at the right depth without getting too deep or flat.
The lower stabilizer strut gives added structure across the bottom of the head. This prevents the head from warping or fish hooking during checks and contact. You get more dimensional pocket control since the stabilizer bar retains the shape.
Together, the two struts enabled me to string a pocket that has pronounced hold points but still releases quickly. The upper strut sets the pocket depth while the stabilizer retains shape down low.
I found ground balls were very easy to control given the enhanced pocket performance. The ball sits perfectly in the sweet spot along the upper strut so scooping felt natural.
With other heads, the ball rattles around more in the pocket area. But with the Tank 2.0, it locks into the optimal positioning for possession and passing.
The two strut setup also maintains pocket shape even when strung with shooters and meshes for added ball retention. You get the best of both worlds – pronounced hold points yet smooth release.
Durable Alloy Frame Provides Maximum Strength
Maverik constructed the Tank 2.0 with a high-grade alloy frame to deliver superior stiffness and durability during play. The head withstands high-impact checks, slashes, and contact thanks to the strength of its alloy composition.
Testing it out in gameplay, the Tank 2.0 held up well even when players laid heavy lumber checks on it. The head retained its shape and did not bend or warp like other heads can.
The rigid alloy frame gives you the confidence to plow through traffic and initiate contact. You do not have to worry about losing your pocket or the head deforming mid-game.
The high-grade alloy also resists weather-related damage. I left the Tank 2.0 outside overnight through rain storms and intense sun. The head looked brand new afterwards with no degradation or warping.
Unlike plastic heads which get brittle, the Tank 2.0’s alloy composition maintains its robust properties in all conditions. You can count on its performance day in and day out.
The strength of the alloy frame also prevents the sidewalls from flexing on shots. All of the energy transfers into the ball instead of getting absorbed by the head. You get maximum speed and a tighter spin on shots.
For a defenseman who plays an aggressive style, the Tank 2.0’s durable alloy frame is a must-have. It allows you to play physically without worrying about your head. This thing is built like a tank.
Aggressive Scoop Facilitates Ground Ball Pickups
The Maverik Tank 2.0 lacrosse head has an aggressive scoop design optimized for picking up ground balls while maintaining forward momentum.
The scoop features a steep taper and crisp flair that actively channels ground balls into the pocket. As you run through a ground ball, it feeds smoothly into the head instead of deflecting away.
I tested scooping grounders at full sprints and found I could corrall balls cleanly without breaking stride. The scoop guides the ball directly into the pocket in one motion.
The flared mid-section of the scoop also gives you some extra reach for errant ground balls. I could stretch out a bit farther and wrangle grounders that were outside my immediate vicinity.
With other heads like the Warrior Evo Pro X, ground balls tend to bounce out of the scoop more. But the Tank 2.0 swallows up grounders with barely any hesitation.
Even in wet conditions, the pronounced flair helps capture ground balls that slide right into the pocket. I didn’t have to adjust or bobble balls – just scoop and go.
The aggressive scoop is perfect for defensemen who need to start transitions off turnovers. You can scoop and clear in one motion or outlet passes immediately thanks to the streamlined ground ball entry.
If you want to gain an edge securing ground balls, the Maverik Tank 2.0 has the ideal scoop setup to feed balls into your stick. The flair and taper make scooping grounders seamless.
Ideal Flexibility in Throat Improves Performance
The Maverik Tank 2.0 lacrosse head has optimized flexibility engineered into the throat/scoop area. The head provides the perfect blend of stiffness for ball control yet with enough give for securing passes and absorbing checks.
Unlike overly rigid heads, the Tank 2.0 has a engineered flex zone right where the head meets the throat. This allows the head to give slightly when receiving hard passes.
The built-in flex ensured my stick didn’t violently jar on passes and risk losing control. It puts a smooth dampening effect on receiving passes while still maintaining stiffness during cradling.
The enhanced flexion also enables the head to absorb checks better. I took some brutal one-handed slashes during play but the Tank 2.0 rolled with the blows nicely to maintain possession through the contact.
An additional bonus is the flex zone reduces fatigue on your hands and arms. You don’t have to constantly cushion rigid blows down your shaft.
However, the head retains a stiff feel and responsive control when maneuvering the ball. The flex zone only engages on high-impact collisions, not general play.
For players who want some shock absorption but don’t like really whippy heads, the Tank 2.0 has the perfect throat flexibility. It’s a game-changing blend of control and forgiving flex.
Lightweight Design Improves Quick Stick Speed
The Maverik Tank 2.0 lacrosse head utilizes lightweight alloy materials to reduce mass and improve quick stick reaction times.
Weighing in at only 5 ounces strung, the Tank 2.0 has one of the lightest overall weights among elite-level defensive heads.
The reduced mass makes a noticeable difference in how fast you can change direction on checks and react out of a triple threat stance.
In testing, I found my split dodges and roll backs were significantly quicker with the Tank 2.0 head. Having less weight to move makes it easier to juke your hands faster.
The quicker reaction time translated directly into more caused turnovers for me. I could throw checks faster and jar more balls loose thanks to the improved speed.
The lighter feel also reduces fatigue over the course of a game. My arms and hands stayed fresher longer into the 4th quarter with less strain.
For younger players transitioning to elite heads for the first time, the Tank 2.0 won’t feel like an anchor. The lightweight build makes it very maneuverable.
The alloy construction strikes the ideal balance between durable yet featherlight agility. Quick stick checks and reactions see a real boost with the Tank 2.0.
Reduced Friction on Top Rail Eases Clamping
The Maverik Tank 2.0 lacrosse head incorporates design elements along the top rail that reduce friction for superior ball clamping and control.
The top rail has a smoothed out contour compared to other heads that dig into your hand. It also angles downward to increase the clamping leverage when pressing overhand.
Testing in gameplay, these subtle rail features let me grab hold of the ball securely with less gripping effort. I could clamp down overhand to shield the ball better thanks to the ergonomic shape.
My hands and forearms also stayed fresher longer into games since I wasn’t fighting against friction to clamp the ball in place.
The reduced friction also allows for smoother re-adjustments when switching hands or turning the stick vertical or horizontal.
With other heads, you feel the grip drag as you try to reposition your clamp. But the Tank 2.0 lets your hand glide smoothly into repositioned clamps.
I found my off-hand also had an easier time guiding the head during cradling. The smooth contour along the rail improves comfort and control.
For players who struggle with overhand clamps or want smoother transitions, the Tank 2.0’s rail shape offers subtle yet game-changing improvements.
Unique Shape Adds Stiffness During Checks
The Maverik Tank 2.0 lacrosse head has an aggressively angled shape that adds stiffness upon checks and contact for superior ball retention.
Unlike rounded heads, the Tank 2.0 utilizes sharp angles and an elongated taper. This unique shaping retains its structure when players go to hit it.
In gameplay, the distinct shape prevented the head from wrapping or absorbing energy on checks. Checks glanced off the angled sidewalls, allowing me to plow through traffic without losing the ball.
The extra stiffness gave me confidence challenging for ground balls and initiating contact against attacking players. I could bounce checks with force, knowing the head would back me up.
Midfielders trying to isolate their matchup find it harder to dodge against the Tank 2.0. The stiff shape counters speed and quickness advantages, holding structure through contact.
Its pronounced shape also makes it easier to direct pokes and lift checks. The angled design guides your stick into disruptive check positioning.
For aggressive players who play physically, the Tank 2.0 has your back. Its unique structural shape maintains the pocket integrity through any kind of contact.
Textured Grip Promotes Control in Wet Conditions
The Maverik Tank 2.0 lacrosse head incorporates a textured grip pattern along the sidewalls that improves wet weather performance.
Unlike smooth plastic heads, the Tank 2.0 has a gritty grip texture molded into the sidewalls and scoop. This helps give you extra traction when handling the head in wet or muddy conditions.
When I played in damp weather, my hands maintained a tight cradle and hold on the head thanks to the textured grip. Raining weather didn’t affect my fundamentals or ball control at all.
The grippy sidewalls also enabled me to push and guide the head more responsively on checks and ground balls when conditions were slick.
With other heads like the STX Hammer 500, wet weather really diminishes your ability to handle the head effectively. But the Tank 2.0 grip makes it very playable in all conditions.
Along with the grip texture, the high offset sidewalls further prevent the ball from slipping out. The grip and raised rail work together to master wet weather.
For players in damp climates or who compete on natural grass, the Tank 2.0’s awesome grip texture could provide a real edge. No more wet weather problems!
Multiple Colorways Available to Match Position Styles
Maverik offers the Tank 2.0 lacrosse head in a variety of colorways so players can match their playing style and team aesthetics.
In addition to the traditional black and gray, the Tank 2.0 comes in flashy metallic versions like copper and gold. These colors pop on the field for LSMs and aggressive defenders.
For a more subtle approach, the white and navy colorways blend in smoothly down low. The dark green and matte gray options also give you a more muted technical look.
The lineup allows long stick middies, close defenders, and LSMs to tailor the head to their game. Flashy colors for highlight reel checks, or stealthier hues to do the dirty work.
Teams can coordinate colors for their defensive unit to match the scheme of their goalie heads. Having cohesive colors amplifies the intimidation factor.
Beyond colors, players can choose between a smooth or textured finish. The matte textures reduce glare while the glossy metallic pops under lights.
Consider the playing style of your defense and the colors your team features when choosing the optimal Tank 2.0 colorway. With so many options, you can get the perfect match.
Backed by Maverik’s Trusted Reputation and Quality
The Maverik Tank 2.0 lacrosse head is produced by Maverik, one of the most trusted and innovative brands in the sport. Maverik engineers quality into all of their heads.
For over 25 years, Maverik has pioneered advances in head design and technology. Maverik continues pushing boundaries with their new developments year after year.
The Tank 2.0 exemplifies Maverik’s commitment to optimizing performance with outside-the-box engineering. From the offset channel to the textured grip, it’s packed with game-changing features.
Maverik also rigorously tests heads like the Tank 2.0 under intense conditions to ensure durability. You know it will retain its high-level performance even after seasons of play.
Many pros rely on Maverik heads exclusively because the brand is synonymous with consistent quality. Tank 2.0 utilizes those same construction methods and engineering.
For parents, Maverik represents a safe, reliable choice backed by a reputation for excellence. You can feel confident your player is getting an elite-level head.
With the Tank 2.0, you receive the peak performance and innovation that Maverik is recognized for worldwide. It’s the genuine article, not an imitation.