If you’re an avid golfer, you know how important it is to have proper traction on the course. And when it comes to golf shoes, Ecco has become a leading brand known for combining comfort and performance. But even the best golf shoes need new spikes every so often to maintain that crisp traction you rely on.
Why Ecco Golf Shoes Need Replacement Cleats
The soft plastic spikes on Ecco golf shoes get worn down over time, naturally losing their ability to grip the grass and keep you grounded during your swing. If you notice your once-sharp Ecco spikes now seem blunt and ineffective, it’s definitely time to replace them. Worn spikes can cause slips, affecting your balance and contact. Replacing them restores the stability you need to drive the ball true and far.
Ecco’s proprietary spike systems are designed to make replacing cleats simple. Their EasyTech system uses slots to pop worn spikes out and snap new ones in without tools. Or, their Tri-Fi-Grip rotational system allows each spike to be unscrewed by hand and swapped. Either way, the process takes just minutes, so there’s no reason to play another round with worn spikes.
When installing new Ecco golf shoe spikes, the most important steps are proper alignment and firmly setting each cleat into the sole. Angle them to match the slot or threading, and press down hard until fully seated in place. Take a walk around to allow them to settle, checking for a snug fit. New spikes should offer instant green-gripping traction once again.
While out on the course, be aware of how your new cleats interact with various surfaces. Avoid concrete paths or cart paths which can rapidly wear those ultra-sharp edges. When finished playing, thoroughly clean your Ecco shoes and brush debris from the spikes. Store properly with shoe trees to prevent structural damage. With care, your new spikes can last through many more rounds!
But after heavy use, your Ecco cleats will inevitably wear out again. Signs include rounded edges, less defined spike shape, diminished grab on grass, and excessive slippage during swings. Don’t wait for spikes to completely flatten or fall out – frequent replacement maintains the high performance traction you expect from Ecco golf shoes.
With the right replacement spikes installed, you can rely on the superb grip and stability of your Eccos for mile after mile on the fairways. Traversing hills, hazards and tricky lies is much easier when your shoes work with you, not against you. So treat your feet to fresh spikes, and you’ll become more confident and consistent out on the course.
Finding the Right Ecco Golf Shoe Spike System
If you’re an avid golfer, having the right pair of golf shoes is essential. Not only do they provide traction and stability during your swing, but they also keep your feet comfortable for those long days out on the course. For many golfers, Ecco golf shoes are a popular choice. Known for their comfort and quality, Ecco utilizes advanced technologies in their golf shoes like Gore-Tex and specialized foam midsoles. However, one key component of any golf shoe is the spike system.
The spikes or cleats on golf shoes grip the grass so you can maintain balance and resist sliding during your swing. Traditionally, metal spikes provided the best traction, but today’s options include plastic/rubber spikes and spikeless shoes. So if you need new spikes for your Ecco golf shoes, what should you consider when selecting a replacement spike system?
Metal vs. Plastic/Rubber Spikes
Metal spikes used to be the go-to choice for golfers wanting maximum traction, but many courses now ban metal spikes due to the damage they cause to greens and fairways. Plastic or rubber spikes provide solid traction without tearing up the course. They are more flexible and disperse weight more evenly than metal. Rubber also grips better in wet conditions. While metal can still provide a bit better traction in some cases, for the versatility and course-friendliness of plastic/rubber, they are generally the best choice for Ecco golf spikes.
Softspikes
One of the most popular brands of plastic replaceable spikes is Softspikes. These plastic cleats are designed to “give and go” by flexing on firm or uneven surfaces while providing traction through the prongs. Softspikes offers options to match different swing styles and preferences:
- Black Widow – Aggressive traction for soft conditions or steep slopes
- Silver Tornado – Versatile traction with silver finish
- Fast Twist – Low profile option for firm conditions
- Flex – Moderately soft spikes for optimal flex and comfort
Due to their proven performance and availability for many spike systems, Softspikes are a top choice for replacing spikes on Ecco golf shoes.
Spikeless Golf Shoes
In recent years, spikeless golf shoes have also grown in popularity. Rather than traditional spikes, these utilize lugs, traction elements, or raised treads to provide grip. They allow for more versatility and can often be worn off the course as well. Ecco produces several high-quality spikeless models like the BIOM Hybrid 3. However, some golfers still prefer the traction of traditional spikes for stability during their swing. So consider if you are willing to trade some extra grip for versatility when looking at spikeless shoes.
Choosing the Right Cleat System
In order to select new spikes or cleats, you first need to know what system your Ecco golf shoes use. The spikes screw into the sole, so you need to match the spike connector pattern. Ecco utilizes two main cleat systems:
- Ecco M: Proprietary system with three prongs angled in M shape
- Champ: Traditional two-prong system compatible with common spikes like Softspikes
The Ecco M system only works with Ecco’s own spikes. So if your Eccos have the three-prong M pattern, you will need to purchase Ecco brand replacement spikes. If your shoes have the two-prong Champ pattern, you can use spikes from Softspikes or other brands designed for that traditional system.
Consider Your Golf Swing and Course Conditions
Another factor in choosing golf spikes is considering the conditions you play in most often. Certain spike types and shapes perform better in different scenarios:
- Soft, wet conditions – longer spikes for added traction.
- Firm, dry conditions – low profile spikes that can penetrate harder ground.
- Steep inclines – more aggressive spike pattern.
- Senior golfers and sore joints – flexible rubber spikes.
Also, reflect on your swing style and what parts of your feet bear the most pressure. High impact areas may require reinforced spikes for durability. Discussing your swing and typical course conditions with your local pro shop can help guide the decision process.
Easy Installation
One perk of many replaceable spike systems is that installation is quick and easy, even mid-round if needed. Simply unscrew the old spikes, screw in the new ones by hand, and tighten with the included wrench or spike tool. Just be sure the spikes are compatible with your Ecco shoe model before purchasing. It takes just minutes to swap out old worn spikes for fresh traction.
Extend the Life of Your Spikes
To maximize your investment in new spikes, here are some quick tips for keeping them in top condition longer:
- Check spike tightness regularly and re-tighten as needed.
- Keep debris out by clearing spikes after each round.
- Replace any broken or damaged spikes immediately.
- Consider carrying extra spikes in your golf bag.
- Rotate two pairs of golf shoes to extend spike life.
With the variety of spike options now available, you can equip your Ecco golf shoes with just the right system for your needs. Paying attention to compatibility, swing style, typical course conditions and maintenance will help you get the maximum performance and longevity out of your new spikes.
Removing Old or Worn Ecco Golf Shoe Spikes
If you’re an avid golfer, you know the importance of having good traction on the course. Worn or damaged spikes can lead to slips, falls, and subpar performance. Ecco golf shoes are known for their comfort and quality, but even the best spikes wear out over time.
Replacing your Ecco cleats regularly is key to maintaining traction and enjoying your favorite golf shoes for seasons to come. While removing and replacing spikes is pretty straightforward, there are some useful tips to make the process easier.
Assess the Damage
Before rushing to replace your Ecco spikes, take a close look at the current cleats. Are they merely dirty and clogged with debris, or are they actually blunted and worn down? A thorough cleaning could restore traction, saving you the hassle of a full spike replacement.
Use a stiff brush and bucket of soapy water to scrub away packed-in dirt. Rinse thoroughly and allow to dry completely. Test on carpet or grass to see if traction has improved. If your spikes remain dull and smooth, it’s time for new ones.
Purchase Replacement Cleats
Once you’ve determined that new Ecco golf spikes are in order, you’ll need to purchase replacement cleats. Make sure to get cleats designed specifically for your Ecco golf shoe model.
The spikes screw into threaded receptacles on the shoe sole. There are different types and thread patterns of receptacles depending on shoe model. Choosing the correct cleat style ensures proper fit and performance.
Many pro shops and sporting goods stores carry replacement spikes for popular brands like Ecco. You can also find spikes in the correct thread pattern online. Stick with metal spikes rather than plastic for longest wear.
Remove the Old Spikes
A cleat wrench is by far the easiest way to unscrew and remove worn Ecco spikes. These inexpensive tools allow you to grip and turn the spikes without damaging the receptacles. If you don’t have a cleat wrench, needle-nose pliers work too.
Turn counterclockwise to unscrew each spike. Be careful not to strip out the receptacle threads. Place a towel inside the shoe to prevent scratching the leather as you remove spikes.
If spikes are stubborn, try soaking shoes in warm, soapy water to loosen the thread adhesive. Let shoes dry completely before attempting to re-install new cleats.
Prep and Install New Spikes
Once old spikes are out, inspect and clean receptacles thoroughly. Remove any compacted debris and wipe out receptacle holes. Check threads for damage.
Most replacement spikes come pre-treated with adhesive on the threads. For extra holding power, apply a drop of thread adhesive like Loctite to new cleats before screwing them in.
Line up new spikes and turn clockwise with your cleat wrench to screw into place. Tighten securely but don’t over torque. The spikes should be stable but still able to release soil and debris.
Maintain Your New Spikes
To maximize the life of new Ecco golf spikes, be sure to care for them properly. Always thoroughly rinse and dry shoes after golfing to prevent dirt buildup.
Carry a small brush in your golf bag to remove debris from spikes as needed on the course. Check tightness of spikes regularly and re-tighten if loose.
When spikes eventually wear down again, don’t delay replacement. Worn spikes reduce traction and put you at risk for slip-related injury. For solid footing and peak performance, routinely replace your Ecco golf cleats.
With the right Ecco spikes and proper care, you can rely on your golf shoes to deliver excellent grip, round after round. Taking time to replace worn cleats is a small investment that pays big dividends in stability and support when you need it most.
Cleaning & Prepping the Ecco Golf Shoe Sole
When it’s time to replace your worn Ecco golf spikes, properly cleaning and prepping the shoe sole is a critical step. Taking time to remove debris, inspect threads, and prep surfaces will ensure your new cleats fit securely and perform their best.
While it may be tempting to rush through spike replacement, don’t underestimate this preparatory process. A clean, intact sole sets the foundation for superior traction and stability round after round.
Remove Old Spikes
Start by using a cleat wrench to unscrew and remove existing spikes. Take care not to strip or damage receptacle threads in the process. Place a towel inside shoes to prevent scratching the leather.
If spikes resist coming out, try soaking shoes in warm, soapy water first to loosen the adhesive. Let shoes dry fully before moving on to inspecting and cleaning.
Clear Out Receptacles
Check each spike receptacle hole for packed in dirt, grass, and debris. Use a thin object like a pick to gently remove buildup and clear out receptacles.
Compressed debris can prevent new spikes from seating properly. Take time to carefully pick out any material from the threaded holes where spikes screw in.
You can also use a toothbrush and soapy water to scrub out receptacle holes if needed. Just be sure to let the soles dry fully before attempting to install new cleats.
Inspect Threads
While cleaning receptacle holes, take time to inspect the threading as well. Make sure threads are intact and not stripped or damaged.
Running a tap through receptacles can help clear out debris from threads. Just take care not to force it if resistance is met.
If threads are compromised, new spikes won’t hold securely. You may need to have damaged receptacles replaced before installing new cleats.
Remove Debris from Sole
Don’t stop at cleaning spike receptacles. Use a stiff brush and mild soap to scrub the entire sole surface too. This removes packed in dirt that can impede traction.
Pay extra attention to the area around and between spike receptacles. Built-up debris around cleats can prevent full contact with the ground.
Rinse shoes thoroughly after brushing and allow soles to dry fully before spike installation. Damp or wet soles won’t hold cleats as effectively.
Apply Adhesive
Though replacement spikes often have pre-applied thread adhesive, applying extra adhesive helps secure the new cleats.
Products like Loctite work well for this. Put a drop or two on spike threads and spread evenly before screwing into receptacles.
This offers added insurance against loose spikes. Just don’t use so much that adhesive oozes out when installing spikes.
Check Fit Before Playing
Once your Ecco shoes are prepared and new spikes installed, do a quick test walk across carpet or grass before playing. This helps seat spikes and lets you double check the fit.
Make sure each spike is screwed in evenly and stable. If any feel loose, remove and re-install with more adhesive. Loose spikes can lead to slips and injury on the course.
Properly prepping your Ecco shoes provides the ideal foundation for excellent traction with new spikes. Don’t cut corners – a clean sole and secure-fitting cleats are key to peak performance.
With quality Ecco golf shoes and fresh spikes, you can tackle the course with confidence. Investing a few extra minutes to properly clean and prep soles makes each step count.
Choosing the Correct New Ecco Golf Shoe Cleats
If you’re an avid golfer, you know the importance of having quality cleats on your golf shoes. The cleats help provide traction and stability during your swing and as you walk the course. Ecco golf shoes are known for their comfort and performance, but the cleats do wear out over time. Rather than continuing to play with worn out cleats or buying entirely new shoes, many golfers opt to just replace the cleats on their existing Eccos. However, with so many cleat options available, it can be tricky to choose the right new set. Here are 15 must-know tips for selecting the perfect new Ecco golf shoe cleats.
1. Choose the Correct Shape
Ecco utilizes three main cleat shapes – traditional, fast twist, and paradox. Traditional cleats are circular with spikes extending out. Fast twist cleats have a more angular shape for greater torque resistance. Paradox cleats have angled “arms” crossing through the middle for multidirectional traction. Examine the bottom of your Eccos to see which type of cleats are currently on there. Then buy replacements with the same shape.
2. Match the Threading System
The spikes screw into threaded holes on the sole of the shoe. Ecco uses a few different threading systems including Champ, Tri-Lok, and PINS. Be sure to buy cleats with the threading that matches your shoes. You should be able to determine this by looking at your current cleats and the holes they screw into.
3. Consider Your Typical Surfaces
Think about the types of surfaces you usually play golf on – hard fairways, soft fairways, thick grass, side hills, etc. Certain spike shapes and materials perform better on different terrains. For instance, longer metal spikes provide more grip in very thick grass or mud. Shorter plastic spikes on the other hand allow greater versatility across varying surfaces.
4. Choose Durable Materials
The spikes themselves are commonly constructed from plastic, nylon, or metal materials. Metal spikes (often made from alloys like titanium) are the most durable, but can’t be used at many courses nowadays. Nylon and high-quality plastics like polyurethane give good longevity and grip. Cheaper plastics wear out fastest. Go with metal or nylon for longest spike life.
5. Opt for Replaceable Spikes
Many modern cleats have spikes that can be unscrewed and replaced individually as they wear down. This allows you to replace just the actual spikes rather than the whole cleat assembly. While initially more expensive, replaceable systems save money in the long run. They also allow customizing spikes for better performance in certain conditions.
6. Try an All-Terrain Option
For golfers playing on a wide variety of course conditions, all-terrain cleats are a great choice. These have multiple spike types and materials integrated. For example, they may combine short plastic spikes for stability with a few longer metal spikes around the perimeter for extra traction when needed. The best all-terrain cleats optimize grip across fairways, roughs, bunkers, and greens.
7. Look for Rotational Resistance Features
Slipping during your golf swing saps power and consistency. Many modern cleats now incorporate design features to resist rotational movement. These include things like angled spike placements or multi-axis spike arms. Testimonials from fellow Ecco wearers can help identify cleats that really keep your feet firmly planted throughout your swing.
8. Check the Spike Count
More spikes don’t necessarily mean better traction. In fact, too many spikes can inhibit necessary rotation when making shots. Most golf cleats have between 6 and 12 spikes, with 7-9 spikes being optimal for stability, grip, and flexibility according to many players. Be wary of cleats claiming higher numbers provide an advantage.
9. Read Online Reviews
Scour online reviews from real golfers to discover the highest-rated Ecco cleats. Look for brands and models with strong ratings and positive feedback on traction, durability, and comfort. Watch out for reports of issues like spikes loosening over time or breaking. This research helps identify the best performing options.
10. Ask Your Golf Pro
Consult the pros at your local golf shop or club fitter. These experts are familiar with the various cleats available and which perform best under real course conditions. They may even carry certain hard-to-find Ecco replacement cleats in stock. Their personalized recommendations account for your swing, typical surfaces, and other factors.
11. Consider Special Release Formulas
Some cleats incorporate proprietary compounds to actively help release turf for less resistance and strain. The Ecco brand has developed special MTN Grip and NATUR cleat formulations for this purpose. While slightly pricier, these can enhance swing mechanics and reduce injury risk.
12. Know Your Size
Replacement cleats are available in various size options from extra small to large to fit different Ecco shoe sole sizes. Measure your current cleats or check the size marked on the sole of your Eccos. Choosing the proper cleat size ensures a snug, wobble-free fit in the threaded holes.
13. Mind Your Budget
Replacement Ecco cleats range widely in price from around $10 up to $50 or more. High-end models from top brands with the latest features naturally cost more. But more budget-friendly options are available too, though spike life may be reduced. Set a spending limit before shopping around.
14. Check for Sales
Keep an eye out for deals on Ecco golf cleats. Retailers often discount prices at certain times of year or run sales during major tournaments. Signing up for newsletters and alerts provides notice of any upcoming sales opportunities to save.
15. Buy Proper Installation Tools
It’s wise to purchase the appropriate cleat installation tool for your Ecco threading system. This ensures you can securely fasten the new spikes without stripping the threads. The tool makes the process much smoother. Some cleats include the tool with purchase.
Finding and installing the ideal new cleats for your beloved Eccos ensures many more rounds of optimized traction and performance. Keep these tips in mind, and you’ll be able to easily select replacement spikes that match your shoe model, typical surfaces, grip needs, and budget. Just follow the recommended process to securely install them and you’ll be hitting the links with confidence.
Proper Alignment When Inserting New Ecco Golf Cleats
Having fresh, grippy cleats on your Ecco golf shoes is crucial for stability and traction during your swing. But simply screwing in new cleats randomly can cause comfort issues and affect your footwork. Properly aligning replacement cleats in the original factory positions is important. Here are 15 tips for correctly inserting and positioning your new Ecco cleats for ideal performance.
1. Mark Cleat Locations
Before removing the old spikes, use a marker to denote their exact placement around the sole. Number each cleat 1 through 6, 7, 8, etc. This preserves the orientation for the new set.
2. Clean Threaded Holes
Use a golf tee or threaded insert tool to scrape out any debris, grass, or buildup in the threaded cleat holes. Proper alignment requires the new spikes to fully seat in the holes when tightened.
3. Apply Thread Lock
Put a small drop of thread locking compound in each hole before installing new cleats. This helps the spikes stay firmly screwed in under golf pressure and vibration.
4. Follow Original Design
Factor in the engineering of Ecco’s original cleat configurations. Features like toe spikes, rotational resistance positions, and metatarsal support placements are intentionally designed.
5. Maintain Balance
Keep left/right symmetry and heel/toe balance. Off-center spikes can make your footwork awkward. Stick to the original balanced layout.
6. Mind Angles
Certain cleats are angled out on some models. Note these angles and maintain the directional orientation. Angled spikes provide traction when pivoting or torquing.
7. Alternate Direction
Spikes often point opposite directions in sequence around the sole. Keep this alternating orientation which efficiently grips turf in all directions.
8. Utilize Tools
Special alignment tools like the Cleatinator map spokes precisely to factory cleat positions. These tools take the guesswork out and assure proper placements.
9. Verify Compatibility
Before blindly copying cleat positions, confirm your replacement spikes are compatible with the sole’s threaded system. Inserting improperly threaded spikes damages the holes.
10. Hand Tighten
Initially tighten replacement cleats by hand using the proper installation tool. This allows tweaking positions before fully tightening them with the tool.
11. Expect Imperfections
Due to wear and tear, factory cleat holes might be slightly misshapen. Adjust positions slightly to account for any imperfections.
12. Leave Gaps
Avoid cramming cleats too close together. Leave a bit of sole surface between spikes for flexibility when walking and swinging.
13. Test Fit
Try on the shoes and walk around before fully tightening cleats. Make sure they feel balanced and don’t poke uncomfortably.
14. Check After Tightening
Examine each spike after fully tightening them with the installation tool. Verify the intended alignment was maintained.
15. Break Them In
Brand new cleats might feel strange at first. Wear the shoes off the course to break them in before your next big match.
Taking care to correctly position your new Ecco golf cleats as closely as possible to the original factory alignment avoids discomfort and optimizes the engineered traction. Referencing markings, utilizing specialty tools, and hand tightening enables dialing in the proper spike angles and orientations. With a little extra attention, your replacement cleats will feel like they came right from the factory.
Getting the Spikes Firmly Set in the Sole
Simply screwing in new spikes may seem straightforward when replacing worn out cleats on your Ecco golf shoes. However, getting those fresh spikes solidly anchored into the sole is critical for stability during swings and preventing looseness while walking the course. Here are 15 pointers for successfully getting your new Ecco cleats firmly set into the sole.
1. Clear Debris
Before installing new spikes, use a tee or threaded tool to pick out any compacted grass, dirt, or debris in the threaded cleat holes. This allows full seating.
2. Test Fit
Hand screw each cleat a few turns to check consistent threading and proper fit. Adjust any that feel tight or loose before fully tightening.
3. Use Thread Compound
Apply a thread locking product like Loctite to the threads and inside the holes. This adheres the cleats in place and prevents loosening.
4. Tighten Gradually
Slowly tighten cleats little by little using the proper tool rather than forcefully over-torquing. Gradual tightening seats threads and spikes better.
5. Alternate Diagonally
When installing a full set, tighten opposing cleats diagonally across the sole to evenly distribute pressure.
6. Don’t Overtighten
While firm setting is important, excessively torquing can strip threads in the soft sole material. Tighten only until snug and flush.
7. Use Proper Tool
Specialized cleat installation tools apply calibrated, consistent torque for ideal tightness without stripping. Don’t substitute regular screwdrivers.
8. Check Thread Pitch
Confirm your new cleats match the thread pitch of the originals to prevent cross-threading which compromises anchoring.
9. Lubricate Threads
Putting a light coating of lubricant on cleat threads makes them twist smoothly into the sole for even tightening and better adherence.
10. Let Adhesive Cure
When using thread adhesive, allow the recommended curing time before playing in shoes. This fully hardens the compound and bonds spikes in.
11. Examine for Gaps
After installation, check around each cleat for any gaps between spike and sole which indicate less than full seating.
12. Consider Filler Material
For stripped or enlarged holes, using plastic heel/sole filler material firms up the space around spikes.
13. Periodically Retighten
Snug cleats again after a few rounds to compensate for any settling or compaction when breaking them in.
14. Replace Stripped Cleats
Don’t keep using loose spikes that result from deteriorated threading. Replace these to maintain stability.
15. Avoid Over-Worn Soles
Very worn soles with enlarged, deformed holes won’t grip new spikes sufficiently. Consider resoling or new shoes.
Taking extra precautions when installing your new Ecco cleats results in spikes that are firmly anchored for miles of ideal traction and foot support. Combined with proper maintenance and periodic retightening, properly seated cleats keep you steady both during swings and walks for lower scores.
Checking Spike Tightness on Ecco Golf Shoes
If you’re an avid golfer, you know how important it is to have proper footwear when you’re out on the course. A good pair of golf shoes can provide traction, stability and comfort during your round. Ecco has become a popular brand of golf shoes thanks to their sleek styles and reputation for quality and durability.
One key component of golf shoes are the spikes or cleats on the bottom. These spikes dig into the grass to give you solid footing for your swing. Over time and wear though, these spikes can become loose or fall out completely. It’s important to periodically check the tightness of your Ecco golf shoe spikes and replace them if needed.
Here are 15 must-know tips for making sure your Ecco golf shoes have the spike tightness you need:
1. Inspect visually
Take your Ecco shoes off and turn them over to visually inspect the bottom spikes. Look to see if any spikes appear loose or are missing. Wiggling from side to side usually indicates a loose spike.
2. Check with your fingers
After visual inspection, run your fingers over the spikes to feel for tightness. Take note of any loose spikes that move or wiggle when touched. Also check for spikes that are missing by feeling for empty slots.
3. Focus on high-wear areas
Pay special attention to spikes around the ball and heel areas. These high-impact points often see the most wear and have a higher chance of becoming loose.
4. Test on multiple surfaces
Try walking on different surfaces like carpet, tile and concrete while wearing the shoes. See if you can feel or hear any loose spikes clicking or moving around.
5. Address sooner rather than later
Don’t delay on fixing loose spikes. The sooner you can tighten or replace them, the less likely they are to fall out during a round and affect your footing.
6. Have proper spike tool on hand
Invest in a good Ecco spike wrench that fits the fastener system on your shoe model. Having the right tool makes removing and tightening spikes much easier.
7. Keep extra spikes available
Order replacement Ecco spikes so you have them ready to swap in when old ones become worn out or fall out. Trying to play with missing spikes can throw off your balance.
8. Follow manufacturer instructions
Consult the user guide or website for your specific Ecco shoe model to learn the proper spike replacement technique. Different designs call for different methods.
9. Tighten in a star pattern
When tightening existing spikes, use a star pattern sequence. This evenly distributes pressure and minimizes the risk of stripped fasteners.
10. Don’t over tighten
Tighten spikes to be snug but not overly torqueing them. Overtightening can damage the sole or spike anchor points over time.
11. Check after each round
Inspect your Ecco spikes after each round of golf and tighten or replace as needed. Don’t wait until you have looseness issues out on the course.
12. Consider more frequent replacement
If you play often on abrasive course terrain, replace your Ecco spikes more frequently to prevent excessive wear and loosening between rounds.
13. Carry a few spare spikes
It’s wise to keep a few extra replacement spikes in your golf bag in case one loosens or falls out during a round. Quick on-course fixes can save the day.
14. Keep spikes clean
Use a brush and water to keep dirt and debris out of your Ecco spikes after rounds. Built-up gunk can accelerate wear and tear over time.
15. Know when to retire shoes
If spike anchors become stripped or excessive sole wear occurs, it may be time to retire those Ecco shoes for a new pair. Don’t prolong shoes past their usable spike life.
With the amount of walking involved and need for solid footing, proper spike maintenance should be a top priority for your Ecco golf shoes. Following these tips can help you avoid loose or missing spikes that could throw off your game. Periodically inspecting and replacing spikes as needed will keep you grounded on the course.
Walking Around to Test New Ecco Golf Spikes
If you’re a golfer, you know how important it is to have the right shoes. A good pair of golf shoes can make all the difference in your game by providing stability, traction, and comfort as you walk the course. Many golfers swear by their Ecco shoes, which are known for their classic styling and innovative comfort technologies.
But even the best golf shoes lose their edge over time. The soft plastic or rubber spikes on the bottom wear down with use, reducing your traction on tee boxes, fairways, and greens. So if your trusty Eccos aren’t gripping like they used to, it may be time to replace those worn-out spikes.
Installing new spikes on your Ecco golf shoes is a simple process, but you’ll want to take them for a test walk before hitting the links. Walking around the house and even outside on different surfaces will help you get a feel for the new spikes and make sure they are providing the traction you need.
Here are 15 tips for testing out new spikes on your Ecco golf shoes:
- Install spikes properly – Make sure to fully seat each spike and tighten properly so they don’t loosen during your walk test.
- Try different surfaces – Walk on carpet, tile, concrete, grass – anything you might encounter on the golf course. Grass is ideal if you have some available.
- Pay attention to traction – Focus on whether your shoes grip the surface or slip at all as you walk. Good spikes will dig in and hold steady.
- Test slopes and angles – Walk up and down inclines, on uneven ground, and over objects. Your spikes need to grip at angles too.
- Walk normally – Don’t tiptoe or glide gently. Walk briskly and make solid contact with your heel and toe to simulate golf movements.
- Try pivoting – Plant your foot and twist, simulating the pivot motion of a golf swing. The spikes should hold firm.
- Use old shoes as comparison – If you haven’t replaced your spikes in a while, wear the old shoes on one foot and new spikes on the other. Compare traction side-by-side.
- Check for pressure points – Make sure no spike is rubbing uncomfortably. Walk around enough to identify any “hot spots.”
- Consider moisture – If possible, try wetting the spikes and surfaces. Traction requirements increase on damp grass.
- Listen for debris – Clear stones, twigs, etc. trapped in spikes that could impair performance or retain moisture.
- Feel your balance – Properly spiked shoes should make you feel securely balanced through your swing.
- Assess durability – Check spikes after walk testing for any damage or wear.
- Consider spike pattern – Arrange spikes for optimal traction based on your swing. Prioritize medial and lateral spikes.
- Make adjustments – If a spike seems loose or is causing discomfort, re-tighten or replace it.
- Take more than one walk – Try different distances, speeds, surfaces, etc. to fully put new spikes through their paces.
While walk testing new spikes may seem tedious, it can prevent traction-related mishaps on the course. Taking the shoes for a short indoor and outdoor stroll will quickly reveal any issues with less-than-optimal spike tightness, pressure points, or performance.
Pay attention to your shoes’ grip, balance, and comfort as you walk. If possible, compare the new spikes directly to your old ones. Remember that properly spiked Eccos will provide great traction even in damp conditions. Don’t rush the test – take your time and assess spike performance on different sloped surfaces.
After a thorough test walk, you can be confident your re-spiked Ecco shoes will perform beautifully on the course. And there’s nothing better than that feeling of planted stability as you swing away, knowing your shoes will hold steady right through the follow-through.
On-Course Precautions With New Cleats
You just got a shiny new pair of golf shoes with fresh spikes, and you’re excited to try them out on the course. While breaking in new cleats can improve traction and stability, it does require some extra care and awareness to avoid potential issues. Whether you’re sporting new soft spikes or going old school with metal cleats, tread carefully and follow these 15 must-know tips for safely strutting your new spikes.
1. Check Course Regulations
Before stepping onto the first tee box, verify that your new cleat type is permitted at the course. Many clubs have banned metal spikes entirely to protect delicate greens and fairways. Soft spikes may have material or length requirements as well. Ask in the pro shop if you’re unsure to avoid any embarrassing shoe mishaps.
2. Wear Them Off Course First
Don’t debut new cleats for the first time during an important round or tournament. Break them in during practice sessions at the driving range or casual rounds to get comfortable first. Walk on different surfaces like concrete or asphalt to buff off any sharp edges and allow the spikes to set into the soles.
3. Watch Your First Steps
When initially walking from a hard surface like a parking lot onto the soft grass of the course, take very light and careful steps. Brand new spikes will dig in aggressively until worn down slightly. A controlled stride can prevent turned ankles or skidding falls those first few steps.
4. Limit Lateral Movement
Sharper cleats grip the turf much more severely during lateral movements versus straight walking. Attempt to walk straight as much as possible early on versus taking quick sidesteps or pivots which can catch the ground. As the spikes dull slightly over time, lateral motions will become easier.
5. Beware Downhill Slopes
Steep downhill slopes require extra care with fresh spikes that really bite into the ground. Control speed and weight transfer carefully, taking light steps. If possible, walk down hills sideways for more stability until the cleats become less aggressive.
6. Check Spike Tightness
Before beginning play, ensure all spikes are tightened securely against the shoe sole. The spikes should be flush with the sole and not able to twist. New cleats can loosen quickly until the fastener sets with use. Frequently check tightness during early rounds.
7. Carry a Cleat Tool
Keep a cleat tool in your golf bag for any minor adjustments needed during the round. A tool allows you to re-tighten any loose spikes on the course. Replace any that become bent or broken to maintain stability and balance while walking.
8. Feel for Unexpected Grab
Sharper cleats on delicate greens can grab suddenly during putting strokes or swings, rolling ankles or jarring knees. Go slower with enhanced awareness of how and when the spikes catch so you can react and avoid injury.
9. Use Lower Body Flexibility
Counteract any abrupt spike catches by keeping knees and ankles as flexible as possible. Keeping joints looser allows your body to pivot naturally and flow with any forces against the cleats. Remaining rigid increases injury risk.
10. Check Greenside Movement
Walk especially lightly near greens where cleats can damage the putting surface. Consider changing shoes or at least the soft spikes if you notice consistent marking. Course workers can help identify any walking issues around greens.
11. Clean Cleats Regularly
As debris builds up in the spikes, traction and stability decrease. Use a water hose or brush to keep each spike clean and gripping properly during the break-in period. Check and clean cleats before each round.
12. Rotate Between Shoes
Alternate golf shoes during the early stages rather than exclusively wearing the new pair. Rotating allows the cleat’s material to reset somewhat between uses for a more gradual break-in process.
13. Check Wear After Usage
Inspect the cleats after every round or practice session initially. Look for any damage, dulling or loosening issues. Addressing wear early on increases the shoe’s longevity and prevents safety hazards.
14. Consider Inserts
Orthotic shoe inserts can provide more cushion and support during the break-in period. Inserts reduce pressure on feet, ankles and knees as your legs adjust to the new cleats.
15. Get Professionally Fitted
Visiting a golf pro or equipment specialist for a professional shoe fitting helps select optimal spike length and material. A proper fit makes breaking in cleats more comfortable while reducing injury risks.
While sharp new spikes offer enhanced traction, proceed carefully those first rounds to safely walk the course. Gradually wear down cleats by rotating shoes, cleaning regularly and moving mindfully. With proper break-in habits, your new cleats will stabilize your footwork swing after swing.
Cleaning Ecco Golf Shoe Soles After Play
That satisfying squeak of a fresh pair of Ecco golf shoes on the first tee can quickly turn into a gritty grind after 18 holes. Proper sole cleaning is key to restoring traction and prolonging the life of your Eccos. While wiping down the upper after a round is simple, extracting debris from shoe bottoms requires some extra steps. Follow these 15 tips to keep the soles of your Ecco golf shoes fresh after each use.
1. Remove Cleats
Before cleaning the soles, detach the cleats to access dirt packed beneath. Use a cleat wrench to loosen and take out each spike individually. Set them aside to clean separately later.
2. Clear Debris with Stiff Brush
Use a firm bristle brush like a vegetable scrub brush to whisk away surface debris on the soles. Scrub the treads, grooves and edges vigorously to dislodge dried mud or grass.
3. Check for Embedded Items
Inspect closely for any stones, twigs or other objects wedged into the treads. Remove carefully with tweezers to avoid scratching the sole material. Caught debris can increase wear.
4. Wash with Mild Soap and Water
Create a mild soap solution with water and gently scrub the entire sole with a small brush. Rinse away all suds and any remaining dirt. Avoid harsh cleaners that may degrade the shoe over time.
5. Particularly Clean Spike Areas
Pay close attention when washing the spike sockets, ensuring no compacted dirt remains. Buildup here prevents stable spike reinsertion. Use a thin tool if needed.
6. Remove Odor with Baking Soda
Eliminate shoe odors by sprinkling baking soda across damp soles after washing. Let sit briefly before wiping away. Baking soda absorbs and neutralizes stubborn shoe smells.
7. Dry Thoroughly Before Replacing Cleats
Allow shoes to fully air dry before replacing spikes. Dampness inside can lead to rusting. Stuff with paper to help absorb interior moisture.
8. Scrub Cleats Individually
Use a small stiff brush and soapy water to remove compacted organic matter from each detached cleat. Rinse and dry completely to avoid reinserting debris.
9. Check Cleats for Wear and Damage
Inspect each clean spike for any cracking, tearing, bending or broken fasteners. Replace immediately if compromised to maintain stability.
10. Lightly Lubricate Cleat Threads
Apply a small amount of lubricant like WD-40 to cleat threads before reinserting into shoes. This prevents rust and helps proper tightening against the sole.
11. Reattach Cleats Securely
Hand tighten each cleat firmly back into place, but avoid over-tightening. Flush and snug contact ensures ideal traction and prevents loose spikes during play.
12. Use Old Toothbrush on Small Areas
For hard to reach spots like around the edge of soles, use an old toothbrush to gently scrub away any remaining debris or dirt buildup.
13. Rinse Away Excess Cleaner
After washing, rinse the soles thoroughly with clean water to prevent residue from any soap or cleaner left behind. Residual chemicals can degrade shoe components.
14. Stuff with Paper to Dry Fully
Place wadded paper inside wet shoes overnight to allow complete air drying. Trapped moisture from inadequate drying leads to odors and damaged material.
15. Apply Waterproofer to Maintain Protection
Once fully dry, spray shoe waterproofing spray onto the clean soles to renew water resistance. This protects leather and fabric for many future rounds.
While Eccos are easy to slip on and off, extracting every grain of dirt after play takes some additional care. Proper sole cleaning preserves fit, traction and comfort mile after mile on the course. With routine scrubbing and attention to detail, your shoe soles will maintain that soft, fresh feel for many seasons.
Removing Built-Up Debris From Cleats
If you’re an avid golfer, you know how important it is to keep your cleats clean and debris-free. Built-up debris in your Ecco golf shoe cleats can affect your stability and footing out on the course. While it may seem tedious, taking the time to properly clean your cleats is crucial for maintaining top performance.
Here are 15 must-know tips for keeping your Ecco golf spikes fresh and debris-free:
1. Invest in a high quality cleat tool.
A good cleat tool, like the ECCO Cleat Tool, makes cleaning built-up debris from your cleats much easier. The curved edge is designed to get into the nooks and crannies, while the brush allows you to scrub away caked-on mud. This inexpensive investment will save you time and energy in the long run.
2. Check cleats before and after each use.
Get into the habit of inspecting your cleats before and after each round of golf. Pre-round allows you to remove any built up debris so you start with a clean slate. Post-round allows you to clean cleats before debris hardens and becomes more difficult to remove.
3. Use a soft bristle brush.
Invest in a soft bristle brush to help loosen and brush away dirt, grass, sand and other debris. Soft bristles are effective yet won’t damage the cleat material. You can find affordable options for golf cleat brushes both online and in your local golf store.
4. Try warm, soapy water.
Fill up a bowl or bucket with warm, soapy water. After a round, dip your shoe in and use a brush to scrub the soapy water over each cleat. The warmth and soap help loosen debris so it can be easily brushed off. Rinse thoroughly after cleaning.
5. Use an old toothbrush.
An old toothbrush can double as a great cleat cleaning tool. The small size allows you to scrub tough debris out of each cleat notch. Keep one in your golf bag so you can do spot cleans whenever needed.
6. Remove cleats to clean by hand.
For a deep clean, use a cleat wrench to completely remove your cleats. This allows you to scrub each cleat individually with a brush and warm, soapy water. Use a towel to thoroughly dry, then reattach to your shoes.
7. Try cleat cleaning solutions.
Look for cleat cleaning solutions at your local golf retailer or online. These are formulated specifically for cleaning golf cleats, with ingredients like detergent, solvents and abrasives to break down dirt and debris. Spray or soak cleats for an easy deep clean.
8. Use a groove cleaning tool.
Groove cleaning tools are great for removing debris within the grooves of each cleat spike. Simply press the tool around each spike and rotate to clean out mud, rocks, grass and other compacted gunk. This ensures maximum traction and stability.
9. Don’t use harsh chemicals.
Avoid dousing your cleats in harsh chemicals like bleach, hydrogen peroxide or acetone. While these may loosen debris, they can also weaken or degrade the cleat material over time, shortening their lifespan.
10. Dry thoroughly after cleaning.
Always dry your cleats fully after cleaning. Leftover water or moisture can lead to rust and buildup. Wipe down with a towel or let air dry completely before storing or wearing again.
11. Check for wear and tear.
Inspect each cleat for excessive wear, tear or damage each time you clean them. Smooth, worn down spikes mean it’s time to replace your cleats for optimal traction and performance.
12. Replace cleats regularly.
Plan to replace your Ecco golf cleats every 8-12 weeks, even sooner if you play frequently. Rotating two pairs extends each set’s lifespan. Fresh spikes give you the traction you need for a great game.
13. Store properly after play.
After cleaning, store your shoes properly to avoid debris buildup between rounds. Stuff with newspaper or shoe trees to hold the shape. Keep covered or in a breathable shoe bag. Avoid excess moisture.
14. Address issues immediately.
Don’t let debris issues linger! As soon as you notice compacted debris or rust, tackle it with cleaning right away. This prevents worsening that makes debris nearly impossible to remove.
15. Seek help from your local shop.
If you’re struggling to keep debris at bay, ask your local golf shop for help. They can recommend the best cleat cleaning tools and solutions to keep your Ecco spikes fresh and clean all season long.
Keeping your Ecco golf cleats debris-free takes some extra effort, but pays off hugely in maintaining stellar traction and stability round after round. Use these handy cleat cleaning tips to get the most life out of your spikes.
Storing Ecco Golf Shoes Properly
As an avid golfer, you know the importance of proper footwear. Your Ecco golf shoes support and stabilize you through 18 holes of play. Taking steps to store them correctly will extend their lifespan so they perform round after round.
Follow these 15 must-know tips to keep your Ecco golf shoes in top shape when they’re not on your feet:
1. Remove cleats after each use.
Detach cleats from your Ecco golf shoes after every wear with a cleat wrench. This prevents buildup of debris that can damage the sole. It also allows both cleats and shoes to dry out fully.
2. Clean debris from shoes.
Use a soft bristle brush and mild soap to gently clean your Ecco shoes after each wear. Remove any dirt, grass clippings, sand or other debris stuck to the shoes. Let air dry fully before storing.
3. Stuff shoes to maintain shape.
Place shoe trees, rolled towels or crumpled newspaper inside your Eccos when not being worn. This absorbs moisture and maintains the proper shape so shoes don’t get misshapen.
4. Use moisture-wicking materials.
Cedar shoe trees or moisture-wicking shoe bags pull sweat and dampness out of your golf shoes to prevent odor issues. Bonus: cedar naturally deodorizes and repels insects!
5. Store in a breathable location.
Let your Eccos fully air out before packing them away. Store in a spot with good airflow, never in sealed plastic bags. This prevents moisture buildup that can warp shoes.
6. Keep out of direct sunlight.
Don’t store golf shoes in hot cars or direct sunlight. Excessive heat can cause the materials to break down more quickly. Find a shaded, cool spot for storage instead.
7. Consider climate control.
In damp climates, use shoe dryer balls or charcoal air purifying bags to absorb excess moisture while in storage. In dry climates, an occasional leather conditioner prevents cracking.
8. Give them a break.
Rotate two or more pairs of Eccos to give each shoe a day off in between wears. This extends the lifespan by preventing excessive wear and tear to just one pair.
9. Check for wear and tears.
Inspect your shoes closely each time you remove them. Look for scuffs, cracks, separating seams or excessive heel wear. Catching issues early allows time for repair.
10. Clean stains quickly.
Don’t let grass stains, dirt or mud linger. Gently scrub stains away as soon as possible with soap and water to prevent permanent discoloration.
11. Use leather conditioner.
Every few weeks, apply a thin layer of leather conditioner to your Ecco golf shoes. This nourishes materials to prevent cracking and keeps shoes supple and water-resistant.
12. Remove odors.
Freshen up smelly shoes by sprinkling baking soda inside overnight. For serious odors, try an activated charcoal shoe deodorizer.
13. Air dry thoroughly.
Never store Eccos while even slightly damp. Allow 8-12 hours of drying time before putting them away to prevent moisture buildup.
14. Store properly.
Keep shoes in breathable shoe bags or boxes up off the floor. Placing them on cedar shoe trees helps maintain shape and absorb moisture.
15. See a pro for repairs.
Don’t try DIY fixes like glue or tape which can further damage shoes. Instead, take them to a qualified shoe repair pro to fix tears, sole separation or lost cleats.
Treating your Ecco golf shoes with care, cleaning and storing them properly extends their lifespan by many rounds. Follow these storage tips religiously and your shoes will perform their best season after season.
Signs That Ecco Golf Spikes Need Replacing
If you’re an avid golfer, you know how important it is to have quality spikes on your golf shoes. Ecco has long been a top brand for comfort and performance on the course. But even the best spikes wear down over time. Knowing when to replace your Ecco golf spikes can ensure you continue playing your best game.
The cleats on golf shoes provide that all-important traction to keep your feet firmly planted during swings and walks across varied terrain. Worn down spikes mean decreased grip, which can throw off your stability. Slipping at the wrong time can lead to awkward shots or even injury. That’s why monitoring the condition of your spikes should be part of your regular golf shoe care routine.
Here are 15 signs that indicate it’s time to replace the spikes on your Ecco golf shoes:
1. Visible wear and tear
Inspect the bottom of your golf shoes regularly. If you notice excessive wear and tear on your Ecco spikes, with material visibly missing or coming apart, it’s definitely time for new ones.
2. Loss of spikes
Keep an eye on whether your Ecco cleats are intact. Spikes will naturally loosen and fall out over time. Replacing cleats as they are lost will help, but if you are frequently losing multiple spikes it indicates the overall condition is deteriorating.
3. Metal exposure
Many Ecco golf spikes have metal tips or plates beneath the exterior plastic. If you notice these metal components becoming exposed, this is a sure sign your spikes are breaking down.
4. Plastic deformation
While the metal parts are durable, the plastic components of Ecco spikes will slowly deform with extensive use. Observe if the shape is distorted or warping compared to a brand new spike.
5. Lack of ground penetration
Sharp spikes are essential for digging into the turf and grass on the golf course. Worn spikes become blunt and fail to penetrate ground as effectively. If your Ecco cleats seem to sit on top of the grass rather than gripping it, it’s time for replacements.
6. Grass buildup
As spikes dull over time, grass can accumulate easily in the grooves and recesses. Large amounts of compacted grass jammed into your Ecco spikes is a red flag the cleats aren’t gripping and penetrating as they should.
7. Sliding during swing
If you feel your feet slipping, even slightly, during your golf swing, your Ecco spikes likely need rebuilding. Any sliding indicates the spikes are not anchoring your feet properly at impact.
8. Unstable footing
Proper spikes will keep you balanced as you swing or walk the course. If you notice yourself wobbling or having near falls because your Ecco golf shoes are failing to stabilize your footing, new cleats are in order.
9. Inconsistent ball striking
Worn spikes can throw off your stability enough to negatively impact your ball striking consistency. If you notice more mishits and off-center strikes lately, replacing your Ecco cleats may help restore proper ball contact.
10. Lower trajectory shots
Spikes play a role in allowing a solid coil and transfer of power from your backswing into the downswing. Fatigued spikes reduce traction, which can prevent efficiently shifting your weight on downswings. This often results in hitting more shots “fat” and with a lower than expected trajectory.
11. Reduced distance
Along with hitting shots thinner, worn spikes sap power from your swing, robbing you of those satisfying long drives. Replacing your Ecco cleats can help restore optimal traction so you can swing aggressively through the ball.
12. Increased instances of chunking
Chunked shots are caused by hitting well behind the ball and taking up big divots. This happens more frequently as spikes wear out and fail to properly anchor during your swing. Fresh spikes can remedy this annoying chunking issue.
13. More stubbed toes
Stubbing your toe happens occasionally to every golfer, but it becomes more common with worn spikes. Dull or missing cleats provide less protection from rocks and other stubbing hazards on the course.
14. General foot discomfort
If your Ecco golf shoes just feel less comfortable than they used to, it could be a clue the spikes need refreshing. Worn cleats alter your natural gait and stances, potentially leading to foot pain and soreness.
15. It’s been over 40 rounds
As a general rule of thumb, you should replace your Ecco golf spikes after about 40 rounds. Even with normal care and cleaning, spikes will near the end of their usable life around this point. Keeping count of your rounds is an easy way to know when new cleats are likely due.
Inspecting and replacing spikes routinely is part of maintaining your highest level of performance. With fresh, grippy spikes on your feet, you can swing and walk the course with confidence. So check those Ecco golf shoes after each round for any of these telltale signs that new cleats should be installed.
Extending Ecco Golf Shoe Cleat Life
If you’re like most golfers, you’ve invested a pretty penny in a quality pair of Ecco golf shoes. With their patented hybrid outsole that delivers exceptional traction and stability, Ecco shoes have become a popular choice for golfers demanding peak performance from their footwear. But as any golfer knows, those sharp, grippy cleats on the bottom eventually wear down after logging countless miles on the course. And when it’s time to replace your Ecco cleats, sticker shock can set in fast. Rather than dishing out big bucks for new spikes, learn how to make your current cleats last longer with these 15 tips for extending the life of Ecco golf shoe cleats.
1. Keep Your Cleats Clean
Seems obvious, but regularly removing dirt, grass, and debris from your Ecco spikes can help them maintain traction and last longer. Give them a quick rinse or brushing after every round and a good scrubbing now and then with warm, soapy water. Proper care keeps them gripping better, longer.
2. Avoid Abusive Surfaces
When possible, walk on soft grass rather than hard surfaces which can wear down spikes more quickly. Consider changing shoes or going spikeless when headed to the parking lot or practice green. Limiting contact with concrete and asphalt preserves your soft spikes.
3. Check for Wear
Inspect the condition of your spikes regularly, looking for blunting, rounding, and wear. Addressing issues early can extend useful life. Replace individual cleats as needed, rather than waiting until the whole set is toast.
4. Consider Cleat Covers
For occasional use on abrasive hard surfaces, soft rubber cleat covers slide over your spikes to protect them. Just take them off when you reach the soft grass of the course. Not a daily solution, but handy for traversing concrete.
5. Carry a Spare Pair
Rotate two pairs of Ecco shoes and you’ll effectively double the life of the cleats on each. It’s a handy way to get more mileage out of your investment in quality golf footwear.
6. Replace Damaged Cleats
Don’t wait until cleats are completely bald to take action. As soon as you notice damaged or missing spikes, get replacements. Worn cleats reduce traction and stability, while missing ones alter your gait and the wear pattern on the sole. Address problems ASAP.
7. Consider Alternative Cleat Materials
Traditional metal spikes grab best but wear quicker than thermoplastic alternatives which grip nearly as well. If you walk a lot on abrasive surfaces, softer cleats may be the better choice to balance traction and longevity.
8. Use Cleat Tools
Specialized wrenches make cleat replacement easier and protect the shoes’ threaded sole inserts from damage that could hamper future cleat changes. Proper tools protect your investment.
9. Check Threads
Inspect sole threads whenever changing cleats and clean out any compacted debris which could prevent cleats from seating fully. Damaged threads may require inserts to be replaced.
10. Hand Tighten Cleats
Use hand tools rather than power tools to install replacement spikes. It’s easy to strip threads or damage sole inserts with overtightening. Snug by hand ensures a solid fit without risk of damage.
11. Avoid Spinning Cleats
When walking on hard surfaces, lift your feet rather than sliding or twisting which can rapidly wear down cleats. Pick up your feet and set them down squarely to minimize unneeded wear.
12. Know Your Terrain
Pay attention to surfaces around the course that are hardest on spikes, like brick or granite pavers. Alter your path to avoid extra abrasion and preserve your cleats.
13. Consider Spikeless Options
For walking rounds in dry conditions, spikeless Ecco shoes provide surprisingly good traction while eliminating cleat wear. Save your soft spikes for days when you really need them.
14. Apply Cleat Covers
Soft rubber sheaths fit over your spikes to reduce wear on abrasive surfaces. Use them situationally rather than daily. They protect cleats and give you a bit better grip on smooth hard ground.
15. Carry Spare Cleats
Toting a few replacement spikes and the wrench in your bag lets you swap out damaged cleats right on the spot. That way you can complete the round with full traction and minimize ongoing damage.
With thoughtful care and strategic maintenance, you can squeeze every possible round out of your Eccos before it’s time to invest in new shoes. Protect your expensive investment in top-quality golf footwear by implementing these tips for extending the life of Ecco golf shoe cleats. With a bit of care, those pricey shoes will deliver maximal stability, traction and comfort for many seasons to come.