How does the Brine King lacrosse head improve your game. What makes its lightweight design stand out. Why is the sidewall hole pattern crucial for ball control. Discover the top features that set this head apart.

Lightweight Yet Durable Design: A Game-Changer for Players

The Brine King lacrosse head stands out in the market with its ultra-lightweight yet highly durable design. Constructed from aircraft-grade alloy, this head offers an impressive strength-to-weight ratio that can significantly impact your performance on the field.

At a mere 5 ounces, the Brine King is one of the lightest heads available. However, its feather-light feel doesn’t compromise its durability. Thanks to advanced sidewall geometry and strategic string holes, this head can withstand even the most brutal checks and slashes, effectively dissipating stress.

Benefits of the Lightweight Design

• Reduced fatigue, allowing players to maintain peak performance throughout the game
• Easier transitions between offense and defense
• Faster hand speed for quicker shots, feeds, and stick checks
• Less strain on shoulders and arms, potentially reducing the risk of injuries like tennis elbow

Is the lightweight design truly beneficial for players? Many athletes who have switched to the Brine King report improved shot velocity and quicker ground ball recoveries. The head’s durability also shines through, holding up well even when subjected to slashes near the throat – a testament to its robust construction.

Strategic Sidewall Hole Pattern: Mastering Ball Control

Ball control is crucial in lacrosse, and the Brine King’s strategic sidewall hole pattern gives players a significant edge in this area. Brine’s engineers have meticulously designed this pattern based on extensive research and real-world data.

The Science Behind the Sidewall Pattern

Using motion capture technology, Brine analyzed thousands of passes, catches, and shots to identify the most common ball contact points on the head. This data informed the development of a proprietary mandrel-hole pattern that maximizes control and response across the entire head.

Advantages of the Optimized Sidewall Pattern

• Enhanced feel for cradling, especially during tricky off-center maneuvers along the upper sidewalls
• Improved ball retention during checks
• Quicker and more accurate feeds on the run
• Better shot accuracy due to cleaner ball release with minimal side spin
• Superior clamping power for scooping up ground balls, thanks to the shaped bottom rail and lower sidewall holes

How does this sidewall pattern translate to on-field performance? Players often report better overall ball control, from improved cradling and passing to more accurate shooting. The strategic hole placement serves multiple purposes, enhancing every aspect of ball handling.

Angled Scoop: The Secret to Lightning-Fast Ground Ball Pickups

In the fast-paced world of lacrosse, the ability to quickly scoop up ground balls can make or break a game. The Brine King’s angled scoop design gives players a significant advantage in this crucial aspect of play.

The Mechanics of the Angled Scoop

The scoop’s angle is carefully calculated to provide the optimal surface for sliding under the ball. This design allows for smoother and faster ground ball pickups, even in tight situations or when approaching the ball at awkward angles.

Benefits of the Angled Scoop Design

• Faster ground ball recoveries
• Improved success rate in contested ground ball situations
• Smoother transition from pickup to cradling
• Enhanced ability to maintain momentum after scooping the ball

Does the angled scoop really make a difference in gameplay? Many players report a noticeable improvement in their ground ball success rate after switching to the Brine King. The design allows for quicker pickups, which can be crucial in gaining possession and creating scoring opportunities.

Superior Shot Power: Harnessing the Stiff Design

Power and accuracy are paramount when it comes to shooting in lacrosse. The Brine King lacrosse head is engineered to maximize both, thanks to its stiff design at high-stress points.

The Science of Shot Power

The head’s stiffness at crucial points allows for optimal energy transfer from the player’s motion to the ball. This results in increased shot velocity without sacrificing accuracy or control.

Key Benefits of the Stiff Design

• Enhanced shot power, allowing players to beat goalies from greater distances
• Improved consistency in shot speed
• Better energy transfer from player motion to the ball
• Reduced energy loss during the shooting motion

How does this stiff design translate to on-field performance? Players often report an increase in shot velocity after switching to the Brine King. The head’s ability to efficiently transfer energy from the player’s motion to the ball results in harder, faster shots that can catch goalies off guard.

Flat Rail Design: The Key to Consistent Shot Accuracy

While power is important, accuracy is equally crucial in lacrosse. The Brine King’s flat rail design addresses this need, providing players with a consistent platform for accurate shooting.

Understanding the Flat Rail Design

The flat rail creates a stable surface from which the ball is released during a shot. This consistency in the release point contributes significantly to shot accuracy, allowing players to better predict and control the ball’s trajectory.

Advantages of the Flat Rail

• Improved shot consistency
• Better control over shot placement
• Reduced unpredictability in ball release
• Enhanced ability to hit specific targets on the goal

Does the flat rail design truly enhance shooting accuracy? Many players report improved precision in their shots after adopting the Brine King. The consistent release point provided by the flat rail allows for better muscle memory development and more reliable shooting mechanics.

Off-Center Ball Stop: Precision Ball Placement at Your Fingertips

Ball placement within the head can significantly impact a player’s control and shooting accuracy. The Brine King’s off-center ball stop is a unique feature designed to optimize ball positioning.

The Role of the Off-Center Ball Stop

This feature allows for more precise ball placement within the pocket, giving players greater control over the ball’s starting position for various lacrosse techniques.

Benefits of the Off-Center Ball Stop

• Enhanced control over ball positioning
• Improved ability to customize ball placement for different shots or passes
• Better consistency in ball release point
• Increased versatility in shooting and passing techniques

How does the off-center ball stop impact gameplay? Players often find that this feature allows them to fine-tune their ball placement for different situations. Whether setting up for a quick shot or preparing for a precise pass, the off-center ball stop provides an extra level of control.

Parabolic Rail Shape: Elevating Your Passing Game

Precise passing is a hallmark of great lacrosse players, and the Brine King’s parabolic rail shape is designed to enhance this crucial skill.

Understanding the Parabolic Rail

The parabolic shape of the rail creates a natural channel for the ball, guiding it along a consistent path during passing motions. This design helps players achieve more accurate and predictable passes.

Advantages of the Parabolic Rail Shape

• Improved passing accuracy
• More consistent ball flight during passes
• Enhanced ability to thread passes through tight spaces
• Better control over pass speed and trajectory

Does the parabolic rail shape really improve passing? Many players report increased confidence in their passing game after switching to the Brine King. The rail’s shape provides a more intuitive feel for the ball’s movement, leading to more accurate and reliable passes in various game situations.

Textured Grip: Enhancing Control in All Conditions

Maintaining a firm grip on your stick is crucial in lacrosse, especially in challenging weather conditions. The Brine King addresses this need with its textured grip on the throat and sidewalls.

The Importance of Grip

The textured surface provides additional friction between the player’s hands and the stick, ensuring a secure hold even in wet or sweaty conditions.

Benefits of the Textured Grip

• Improved stick control in various weather conditions
• Reduced likelihood of the stick slipping during intense play
• Enhanced feel for the stick’s position, aiding in quicker reactions
• Increased confidence in stick handling and ball control

How does the textured grip impact gameplay? Players often report feeling more connected to their stick when using the Brine King. This improved grip translates to better overall control, allowing for more precise movements and increased confidence in challenging game situations.

Unique Shape for Deeper Pockets: Customizing Your Play Style

The shape of a lacrosse head can significantly impact its stringing options and pocket depth. The Brine King’s unique shape is designed to allow for deeper pockets, catering to players who prefer this style of play.

Understanding Deep Pockets

A deeper pocket can provide better ball retention and allow for more powerful shots. The Brine King’s shape accommodates this preference while still meeting all regulatory requirements.

Advantages of the Deep Pocket-Friendly Design

• Improved ball retention during aggressive play
• Enhanced ability to generate shot power
• Greater versatility in stringing options
• Better suited for players who prefer a more “baggy” feel

How does the ability to string deeper pockets affect gameplay? Many players, especially those in offensive positions, appreciate the added ball control and shot power that a deeper pocket can provide. The Brine King’s shape allows players to customize their pocket depth to suit their individual playing style and preferences.

Versatility in Specifications: Meeting All League Standards

In competitive lacrosse, equipment specifications are crucial. The Brine King is designed to meet all high school, college, and professional league specifications, ensuring its usability across various levels of play.

The Importance of Meeting Specifications

Adhering to league standards is not just about compliance; it’s about ensuring fair play and allowing players to use the same equipment as they progress through different levels of the sport.

Benefits of Meeting All Specifications

• Usable in high school, college, and professional leagues
• No need to change equipment when transitioning between levels
• Confidence in equipment legality during official games
• Allows players to focus on their game without equipment concerns

Why is meeting all specifications important for players? This versatility allows athletes to become comfortable with their equipment and maintain consistency as they progress in their lacrosse careers. It also eliminates the need for multiple heads for different leagues or levels of play.

Color and Graphic Options: Expressing Your Style on the Field

While performance is paramount, personal style also plays a role in equipment choice. The Brine King offers multiple color and graphic options, allowing players to express their individuality on the field.

The Role of Aesthetics in Sports Equipment

While not impacting performance directly, the look of equipment can boost a player’s confidence and team cohesion. The variety of options available with the Brine King caters to different tastes and team color schemes.

Advantages of Multiple Color and Graphic Options

• Ability to match team colors
• Expression of personal style
• Potential for color coding based on position or play style
• Enhanced visual appeal and individuality on the field

How do color and graphic options impact player experience? While not affecting performance directly, many players report feeling more confident and connected to their equipment when it aligns with their personal style or team colors. The Brine King’s variety of options allows players to find a look that resonates with them.

Brine’s Legacy: A Century of Lacrosse Innovation

When choosing lacrosse equipment, a company’s history and reputation matter. Brine has been a leader in lacrosse equipment since 1922, bringing generations of innovation to the game.

The Importance of Experience in Equipment Design

Brine’s century-long involvement in lacrosse has allowed them to refine their designs based on player feedback and evolving game dynamics. This wealth of experience is reflected in the quality and performance of the Brine King lacrosse head.

Benefits of Choosing a Legacy Brand

• Confidence in product quality and performance
• Access to decades of research and development
• Assurance of ongoing innovation and improvement
• Support from a company deeply invested in the sport

How does Brine’s legacy impact the Brine King lacrosse head? The head’s design incorporates lessons learned from decades of equipment manufacturing. Players benefit from this accumulated knowledge, resulting in a product that addresses the evolving needs of the modern lacrosse player while maintaining the quality expected from a respected brand.

Player Testimonials: Real-World Performance of the Brine King

While specifications and features are important, real-world performance is the ultimate test of any piece of sports equipment. Many players who have switched to the Brine King lacrosse head report significant improvements in their game.

Common Themes in Player Feedback

Across various skill levels and playing styles, certain benefits of the Brine King are consistently mentioned by players:

• Noticeable reduction in arm fatigue during long practices or games
• Improved shot velocity and accuracy
• Better success rate in ground ball situations
• Enhanced ball control, especially during aggressive play
• Increased confidence in equipment durability

How do these testimonials reflect the Brine King’s performance? The consistent positive feedback across various aspects of play suggests that the head’s features translate effectively to on-field performance. From the lightweight design reducing fatigue to the strategic hole pattern improving ball control, player experiences seem to align closely with the intended benefits of the Brine King’s design.

Investing in Your Game: The Value Proposition of the Brine King

When considering an upgrade to your lacrosse equipment, it’s important to weigh the costs against the potential benefits. The Brine King lacrosse head, while potentially more expensive than some alternatives, offers a compelling value proposition for serious players.

Factors to Consider in Equipment Investment

• Potential performance improvements
• Durability and longevity of the equipment
• Versatility across different levels of play
• Brand reputation and support

Is the Brine King worth the investment? For many players, the performance benefits and durability of the Brine King justify its cost. The potential for improved shot power, better ball control, and reduced fatigue can significantly impact a player’s performance and enjoyment of the game. Additionally, the head’s compliance with various league specifications ensures its usability as players progress in their lacrosse careers.

Lightweight yet Durable Design Reduces Fatigue

As a lacrosse player, having the right gear can make all the difference in your performance on the field. After long practices and intense games, the last thing you want is extra weight dragging you down. That’s why the ultra-lightweight yet highly durable design of the Brine King lacrosse head really stands out.

Constructed from aircraft-grade alloy, the King head offers an ideal strength-to-weight ratio. At only 5 ounces, it’s one of the lightest heads on the market. However, don’t let that feather-light feel fool you. This head can withstand even the most brutal checks and slashes thanks to advanced sidewall geometry and strategic string holes that dissipate stress.

What does this lightweight but sturdy construction mean for you? Firstly, less fatigue so you can keep pushing all game long. The lightweight feel makes it easier to transition quickly between offense to defense. Secondly, you’ll have faster hand speed for quicker shots, feeds, and stick checks. Lastly, less overall strain on your shoulders and arms helps prevent injuries like tennis elbow.

As someone who has played with heavy metallic heads in the past, I can certainly appreciate the mobility and quickness the Brine King provides. My shots have more velocity and I get to ground balls first more consistently thanks to the featherweight design. Yet it still holds up great even when slashed near the throat – something that would bend or break flimsier heads.

So if you’re looking to shed excess weight without sacrificing durability this season, the Brine King lacrosse head delivers the best of both worlds. The lightweight alloy construction reduces fatigue for sixty minute dominance!

Strategic Sidewall Hole Pattern for Improved Ball Control

Once you have the ball, keeping it in your stick is the next challenge. The strategic sidewall hole pattern on the Brine King gives you superior ball control compared to other heads.

Brine engineers optimized the King’s sidewalls by analyzing thousands of real-world passes, catches, and shots. They identified the most common ball contact points on the head through motion capture technology. Then, they developed a proprietary mandrel-hole pattern to maximize control and response across the entire head.

The result is better feel for cradling, especially on tricky off-center cradles along the upper sidewalls. The ball just seems to stick in the pocket, allowing you to retain possession through checks and make quicker feeds on the run. I’ve also noticed significantly improved accuracy on my shots after switching to the King. The ball releases cleanly with minimal side spin thanks to the dialed-in sidewall holes.

In crowded scrums or battles in front of the crease, ground ball possession is vital. The shaped bottom rail and lower sidewall holes give you exceptional clamping power for scooping up 50/50 ground balls. Once again, the strategic hole pattern results in unmatched command of the ball to gain an edge.

So if you’re looking for better overall ball control this season, the expertise that went into crafting the Brine King’s sidewall hole pattern really pays off. Every hole placement serves a purpose for cradling, passing, catching, and shooting.

More Key Features

Beyond the lightweight yet durable design and strategic hole pattern, the Brine King lacrosse head has many more features that make it a top choice:

• Angled scoop for quick ground ball pickups
• Stiff at high stress points for superior shot power
• Flat rail design for consistent shot accuracy
• Off center ball stop for precise ball placement
• Parabolic rail shape for pinpoint passing
• Textured grip on throat and sidewalls
• Unique shape allows for deeper pockets
• Meets all HS, college, and pro specs
• Available in multiple colors and graphic options

When you add up all these elements, it’s easy to see why the Brine King is trusted by so many top attackmen, middies, and face-off specialists. It provides the competitive edge to dominate possession and finish shots this season. After all, Brine has been a leader in lacrosse equipment since 1922, bringing generations of innovation to the game.

So don’t just take my word for it. If you’re looking to upgrade your lacrosse gear this year, give the King head serious consideration. The lightweight durability, strategic hole pattern, angled scoop, and other key features come together to deliver the ball control, quickness, and shot power needed to own the field!

Strategic Sidewall Hole Pattern for Improved Ball Control

If you’re looking to step up your lacrosse game this season, upgrading your equipment can make a big difference. One key piece of gear that can really impact performance is your lacrosse head. Lacrosse heads with strategically designed sidewall hole patterns can significantly improve ball control, passing, catching, and shooting accuracy. The Brine King lacrosse head is one model that utilizes an innovative sidewall hole pattern to give players an edge on the field.

So what makes the Brine King’s sidewall hole pattern so effective? There are a few key features that set it apart:

Strategic Hole Placement

The holes on the Brine King head are strategically placed to improve stiffness, decrease drag, and give players better feel and control over the ball. The pattern focuses holes around the sweet spot and scoop areas. This gives players enhanced control when cradling, passing, and shooting from these high leverage areas on the head.

V-Shape Hole Orientation

The holes on the King head have a unique V-shape orientation, rather than the traditional diamond orientation. This shape channels air flow to reduce drag. Less drag means faster throwing and passing speeds. The V-shape also stiffens the sidewalls, giving players a responsive feel when handling the ball.

Gradual Hole Progression

The King’s sidewall hole pattern features a gradual increase in hole size from top to bottom. The smaller holes at the top help dampen vibration when catching passes. Moving down, the holes enlarge to promote faster release when passing and shooting. This gives players the best of both worlds – control up top and speed down low.

In addition to the sidewall hole pattern, there are some other great features that make the Brine King a top-tier lacrosse head:

FORWARD Cant Technology

The King head utilizes Brine’s FORWARD Cant design which angles the sidewalls forward by 5 degrees. This cant helps direct passes and shots on goal. It also widens the sweet spot for increased accuracy during cradling, passing, and shooting.

MaxOffset Handle

The King comes strung with Brine’s unique MaxOffset handle. This handle angles the butt-end down and away from the head. The offset improves the feel in your hands by removing pressure from the pinky finger. It also raises the ball further up in the pocket for enhanced control during play.

Strategic Stringing Holes

The head has optimized stringing holes that enhance pocket and release point adjustability. You can easily customize the pocket location, depth, and channel to match your playing style and position. The holes also promote quick break-in so you get peak performance faster.

Stiff Rail Design

The King features an enhanced rail design that adds stiffness without extra weight. The stiff rails increase durability while also amplifying energy transfer for faster, more accurate passes and shots.

Lightweight Construction

Through a combination of design, geometry, and materials, Brine engineered the King to be lightweight yet highly durable. At only 5 ounces, the head moves quickly while still standing up to the physical play of elite lacrosse.

Brine packed some seriously innovative tech into the King lacrosse head. If you’re looking to gain an edge over your opponent this season, the King’s strategic sidewall hole pattern and other advanced features can help take your game to the next level. Upgrading to the King is a smart investment for lacrosse players who want better ball control, passing, and shooting.

Angled Scoop for Quick Ground Ball Pickups

In the fast-paced game of lacrosse, ground balls can make all the difference between winning and losing. The ability to quickly pick up loose balls gives your team extra possessions and more scoring opportunities. That’s why having a lacrosse head with an angled scoop can be a real game-changer.

The Brine King lacrosse head utilizes an angled scoop design to help players gain an advantage in ground ball battles. Here’s an in-depth look at how the angled scoop improves ground ball control:

Downward Angle

The scoop on the King head angles downward by 15 degrees. This downward angle brings the scoop lower to the ground, getting you closer to the ball. The proximity allows you to pinpoint and corral ground balls quicker off the hop.

Smooth Transition

The angled scoop blends smoothly into the sidewalls, creating a seamless transition that guides ground balls into the pocket. There’s no abrupt change in angle that can bounce balls away. The smooth design channels balls right into the sweet spot for quick control.

Stiff Lower Scoop

The lower half of the King’s scoop contains extra plastic reinforcement to keep the scoop stiff. This stiffness prevents the scoop from folding or flexing on tough ground balls. You get improved ground ball control and pick-up speed as a result.

Flared Shape

In addition to the downward angle, the King’s scoop has a wider, flared shape. This shape gives you a larger head-on profile to intercept ground balls before they slip by. The flared design also increases your pickup range for scooping up errant passes.

Along with the angled scoop, the King head provides other advantages for gaining an edge on ground balls:

Textured Scoop

The scoop contains a textured pattern that improves friction to help pin ground balls. The textured surface grabs onto balls better to prevent bobbling and loss of possession.

Offset Handle

The offset handle on the King lifts the ball higher in the pocket, giving you better control when scooping up ground balls. The offset handle positions your hands away from the scoop for unobstructed access to ground balls.

Deep Pocket

The King head comes designed with a deep, rounded pocket that cradles balls securely. Once you gain possession of a ground ball, the pocket locks it in place while you run down the field or look to pass.

Lightweight Construction

Weighing just 5 ounces, the lightweight King head requires less effort to maneuver quickly toward ground balls. You can move it faster to gain an edge in ground ball battles.

Stiff Shell

The King’s stiff shell keeps its shape, even when kneeled over and jostling for ground balls. The retention of shape provides consistent ground ball performance at all angles.

Winning possessions off ground balls can make a major difference in lacrosse. With its angled scoop and other ground ball-focused features, the Brine King gives you quick, controlled pickups to help dominate possessions. Upgrading to the King head is a smart move for lacrosse players looking to expand their ground ball game.

Stiff at High Stress Points for Superior Shot Power

Unleashing powerful shots is a must for dominating in lacrosse. A head with optimized stiffness at key stress points can give your shots extra velocity and penetration. The Brine King lacrosse head utilizes strategically stiffened rails and sidewalls to deliver maximum ball speed.

Here’s a closer look at how the King head’s stiffened construction amplifies shooting performance:

Stiffened Sidewall Rails

The sidewall rails on the King undergo a proprietary injection molding process. This adds structural stiffness by increasing plastic density along the rails. The process targets the mid-to-lower rails that experience the highest stress when shooting.

Strategic Stiffening Points

In addition to the rails, Brine engineers stiffened other key areas on the head. The scoop, throat, and ball stop areas see added structural reinforcement to retain shape. This prevents energy loss or dissipation when shooting from these prime points.

Gradient Stiffness

The King’s sidewalls utilize a gradient stiffness design. The lower sidewalls are extra stiff to maintain a rigid shooting channel, while the upper walls taper to a more flexible feel for ball control. This gradient maximizes both shot speed and handling.

Geometric Shaping

The angular, hexagonal shape of the King naturally stiffens the head. Brine optimized the geometry to reduce flexion when shooting. This shape also focuses energy transfer down through the middle rails for precision shooting.

High-Strength Resin

Brine molded the King using an advanced polypropylene-based resin. This material provides high strength and rigidity without adding extra weight. The resin enhances durability in high-load areas to maintain stable shooting performance.

In addition to structural stiffening, the King provides other technologies to boost shooting velocity and power:

Launch Pocket

The Launch pocket on the King head tightens up and angles rearward to propel shots with extra speed and precision. The pocket design also focuses more energy behind the ball.

Precision Pocket Location

The stringing holes allow optimal pocket placement in the head’s stiffest shooting channel. This locates the ball’s release point for maximizing exit velocity and directional shooting.

Scoop Stiffeners

The rigid scoop retains shape when picking shots up off the turf, resulting in better ball control and tighter shooting.

Offset Handle

The handle’s offset bumper improves feel and leverages more energy transfer down the head for greater shot velocity.

With its smart stiffening system and launch pocket, the Brine King gives you an ideal stiffness profile for ripping shots. If you want to overpower goalies this season, upgrading to the King is a sure way to add yards to your shot.

Flat Rail Design for Consistent Shot Accuracy

Inaccuracy can kill offensive momentum in lacrosse. A head with flat rails that minimize shot dispersion can be a game-changer for improving shooting precision. The Brine King lacrosse head utilizes a flat rail design to tighten shot grouping and raise shooting percentages.

Here’s a closer look at how the King’s flat rails boost shooting accuracy:

Minimized Rail Curve

Most lacrosse heads have significantly curved sidewall rails that can disperse shot velocity. The King’s mid-to-lower rails feature a minimized curve that keeps more energy focused down the straight shooting channel.

Orthogonal Rail Orientation

Brine oriented the King’s sidewall rails to run orthogonal (perpendicular) to the intended ball flight path. This alignment provides a flat, even shooting surface that reduces errant deflections off the rails.

Parallel Rails

The top-to-bottom rails on each sidewall run parallel to each other. This removes any divergence that could send shots astray from the intended shooting lane.

Flat Ball Stop

The King’s minimalist ball stop design features a flattened surface with no abrupt edges. This promotes continuous ball-rail contact for straight shooting off the stop.

Flush Throat Transition

The throat on the King head provides a smooth, flat transition up into the scoop. This lessens any glancing or redirection of shots from the throat area.

In addition to the flat rails, other technologies in the Brine King improve shooting accuracy:

Stable Scoop

The King’s reinforced scoop retains its flat, rigid shape even when bearing down on shots. This consistency creates a predictable ball trajectory.

String Hole Alignment

The stringing holes allow optimal top string and shooting string placement to center ball rotation and release from the rails.

Precision Pocket Location

The strung pocket is positioned deep in the flattest section of rails to minimize torque-induced dispersion upon shot release.

Symmetrical Rail Design

The symmetrical, non-offset rails apply even pressure distribution to the ball during the shooting motion.

Perfect Whip

The ideal head shape and pocket design allow the ball to roll off the pocket with perfect backspin for accuracy.

With its flat rails and symmetrical design, the Brine King launches shots with precision time and time again. For lacrosse players demanding consistent shooting accuracy, the King is the top head on the market this season.

Off Center Ball Stop for Precise Ball Placement

In lacrosse, maintaining control of the ball in the offensive zone is critical for setting up plays and scoring goals. An off center ball stop provides a way to precisely place the ball at the optimum spot in your stick for possession retention. The Brine King lacrosse head utilizes an off center ball stop for enhanced ball control.

Here’s a closer look at how the off center ball stop on the King head improves ball placement and possession:

Asymmetrical Positioning

The King’s ball stop sits off center, closer to the high left sidewall. This asymmetry moves the resting sweet spot away from the deepest part of the pocket to an higher, more controllable position.

Reduced Frontal Offset

The decreased offset towards the front of the head creates a more rear-set ball position. This allows better protection of the ball and leverage for stick checks.

Angled Stop Wall

Instead of a perpendicular stop, the King’s ball stop angles outward toward the left sidewall. This angle guides the ball’s resting point upwards for better handling.

Pocket-Stop Alignment

The channel and pocket are aligned with the off center stop to channel the ball directly into the stop’s sweet spot location.

Reinforced Stop Wall

Added plastic along the stop wall makes it rigid to hold the intended ball placement. It won’t flex or deform even when bearing down with possession checks.

In addition to the off center ball stop, the King provides other advantages for precise ball control:

Retention Band Stringing

A retention band nylon in the top of the pocket cradles the ball securely in the stop’s sweet spot for confident carrying and dodging.

Pocket Weave

A tightly-woven mid pocket section holds the ball centered in the head while on the run.

Deep Sidewall Rails

The deep sidewall rails enclose the ball in the head for superior control during stick checks and physical play.

Offset Handle

The offset handle keeps the butt-end from interfering with ball positioning at the stop sweet spot.

Flared Scoop

The flared scoop provides ample room to cradle the ball in the upper pocket when drawing checks.

The off center ball stop gives lacrosse players an intelligent, asymmetric way to improve ball control. If retaining possession in traffic is critical to your game, the Brine King perfectly places the ball for handling.

Parabolic Rail Shape for Pinpoint Passing

In lacrosse, quickly moving the ball downfield requires accurate passes that hit their target. A head with parabolic rails can focus passes for improved precision and catchability. The Brine King lacrosse head utilizes an innovative parabolic rail shape to deliver tight, on-point passes.

Here’s a closer look at how the parabolic rails on the King head enhance passing performance:

Controlled Flexion

The parabolic curve to the King’s rails allows them to flex back slightly on passes. This catapult-like flexion boosts velocity while keeping passes centered.

Ball Guidance

As the ball releases, the rails snap back into true shape, applying directional pressure along the intended pass line. This guidance keeps passes on target.

Reduced Sidewall Deflection

The parabolic shape minimizes lateral ball deflection off the rails during passing. Passes stay truer on line without veering off course.

Deep Pocket Support

The curved rails wrap around the lower pocket to support ball control and release. The extra contact prevents squirting passes from deep in the head.

Optimized Energy Transfer

The rail curves concentrate passing forces behind the ball’s central axis for maximum delivery speed and efficiency.

In addition to the parabolic rails, the King provides other technologies for improved passing:

Pinpoint Pocket Location

The strung pocket sits low in the centre of the rails to focus energy transfer and ball direction.

Semi-Soft Mesh

The premium semi-soft mesh provides responsive hold and release when passing from all angles.

Shooter’s Sweet Spot

The King’s lower sidewall indent creates an extra sweet spot for generating speed and accuracy from tight passes.

Textured Grip

The tactile grip texture provides positive handle control for placing passes exactly where intended.

Quick Release Shooting Strings

Shooting strings pop the ball out cleanly with enhanced spin for easier catches.

The Brine King’s parabolic rails send passes dialed-in to their targets. For lacrosse players who demand precision passing, the King brings a new level of ball delivery accuracy this season.

Textured Grip on Throat and Sidewalls

Maintaining control of your lacrosse stick is crucial when stick-handling, passing, and shooting in intense game situations. Strategic grip textures that enhance handling can give players an edge. The Brine King lacrosse head provides extra grip textures on the throat and sidewalls for superior control.

Here’s a closer look at how the grip texturing on the King head improves performance:

Raised Sidewall Pattern

A raised diamond texture pattern coats the lower sidewalls on the head. This provides added grip and traction when cradling to retain command of the stick.

Recessed Throat Texture

The throat area features a recessed crisscross texture that creates extra friction. Your top hand gets a secure grip on shots, passes, and clears.

Grippy Scoop Surface

The scoop contains built-in grip pads that prevent slippage when picking up ground balls or bearing down on shots.

Strategic Placement

The grip patterns focus on high-wear areas like the throat, sidewalls, and scoop that take the most abuse during play.

All-Weather Performance

The grip textures maintain their tactile friction even in wet or humid conditions when the head gets slippery.

In addition to the grip texturing, the King provides other technologies to improve handling:

Comfortable Offset Handle

The handle’s offset bumper improves overall comfort and control when maneuvering the stick.

Flared Handle End

The handle flares out at the butt-end providing a sure grip for overhead passes and stick fakes.

Lightweight Construction

The ultra-lightweight head and handle lessen fatigue to maintain precision during intense play.

Deep Pocket

The deep pocket cradles the ball securely to prevent drops while running and dodging.

Precision Balance Point

Meticulous weight distribution creates an ideal balance point just above the hands for effortless control.

The tactile textures on the throat and sidewalls give players enhanced command over the stick. For developing next-level stick skills, the Brine King provides an easy-handling design with strategic grip placement.

Unique Shape Allows for Deeper Pockets

In lacrosse, a deep pocket improves ball control, possession, and accuracy. The ability to customize extra-deep pockets can elevate a player’s game. The Brine King lacrosse head has an innovative shape that allows players to string deeper pockets for superior performance.

Here’s a closer look at how the King head’s unique shape enables improved pocket depths:

Elongated Head Shape

The King features a more elongated, tapered head shape. This provides extra length down low to form a voluminous pocket.

Angled Sidewalls

Instead of vertical sidewalls, the King’s walls angle outward as they descend. This widens the lower throat area to support deeper pocket stringing.

Dropped Sidewall Holes

The sidewall stringing holes sit lower on the head, increasing adjustable pocket lengths. Players can string their ideal pocket depth.

Expanded Throat Flare

A flared throat opening allows more room for wider pocket bags during stringing. You can form more defined channel pockets.

Increased Offset

The increased sidewall offsets widen spacing to fit more strings and create voluminous mid pocket bags.

In addition to enabling deep pockets, the King provides other advantages:

Shiftable Shooting Strings

Adjustable shooting string posts permit pocket tweaks to maintain ball control in deep pockets.

Stiff Sidewalls

The rigid sidewall rails prevent deep pocket bags from collapsing under pressure.

Flexible Upper Sidewalls

The softer upper sidewalls form nice round contours at the pocket tops for clean holds and releases.

Durable Materials

Reinforced high-strength plastics allow the elongated head shape to hold up over time.

Lightweight Feel

Despite the larger size, the King maintains a feather-light feel for quick maneuverability during play.

The one-of-a-kind shape makes the Brine King a customizeable head for players wanting to string deep, high-performance pockets this season.

Meets All HS, College, and Pro Specs

Having a lacrosse head that meets all playing level specifications ensures eligibility across high school, college, and pro leagues. The Brine King is designed as a universal head that conforms to key dimensions, pocket depths, and shape rules at all levels of lacrosse.

Here’s a closer look at how the King complies with key lacrosse head regulations:

HS Ball Stop Requirements

The King’s ball stop height, angle, and recess depth allow compliant pocket depths up to 3 inches for high school play.

NCAA Widest Points

At its widest point, the King head measures 6.5 inches, within the maximum NCAA allowance for men’s sticks.

Minimum Throat Widths

With a 3-inch throat, the King meets the minimum throat size requirements for organized college and pro leagues.

Pro Pocket Locations

Pro leagues mandate pockets sit between 4.5 to 7 inches from the top of the head. The King’s string holes permit pro-legal depths.

Length and Shape Rules

The overall King head length, scoop angle, sidewall design, and sidewall dimensions adhere to all association specifications.

Weight Regulations

Weighing in at 5 ounces strung, the ultra-light King falls well below the maximum head weight limits at all levels.

In addition to conforming to key specs, the King provides versatile technologies to customize performance:

Adjustable String Holes

The modular string holes allow customized pocket placement, depth, and shooting string angles for any league or playing style.

Shape Retaining Construction

The King’s rigid head shape won’t warp or deform over time, maintaining compliance season after season.

Durable Materials

Reinforced thermoplastics withstand hardcore play, preventing cracks or breaks that could lead to non-compliance.

Precision Molded Design

Advanced forming techniques produce dimensionally accurate heads to the 1/100th of an inch for guaranteed spec conformance.

As the only true universal head for all levels of lacrosse, the Brine King provides advancement-ready performance right out of the box.

Multiple Color and Graphic Options

Adding style to your lacrosse gear can be a fun way to express your personality on the field. A head that offers various color and graphic options gives players control over their look. The Brine King lacrosse head comes available in a wide selection of colors and patterns to customize your style.

Here’s an overview of the different graphic options offered for the King head:

Classic Colors

The King comes in go-to lacrosse colors like white, black, gray, maroon, Carolina blue, navy, forest green, and burnt orange to match any team’s schemes.

Vibrant Colors

For players wanting vibrant looks, the King serves up eye-grabbing matte colors like bright green, luminous yellow, cherry red, electric blue, and neon orange.

Dual-Color Fades

Two-tone fades combine classic colors on the King for unique looks. Popular fades include black to red, navy to light blue, and forest green to lime.

Digital Camo Prints

Brine offers next-gen digital camo prints in various color combinations including blue, grayscale, green, orange, pink, and yellow digital camo.

Tribal Graphic Prints

For a tribal vibe, the King comes printed with black, white, red, aqua, and lime tribal graphic prints and accents.

Sketch Art Patterns

King heads can feature eye-catching sketch art patterns for an artistic flair. Options include abstract shapes, cyber motifs, graffiti designs, and distorted grids.

Custom Options

Brine also offers full custom graphic printing to create unique King heads. Add names, numbers, team logos or mascots for complete personalization.

In addition to eye-catching graphics, the Brine King provides great performance:

Lightweight Feel

Despite the graphics, the 5-ounce King maintains a fast, lightweight feel on the field.

Vibrant Colors

Inks infuse directly into the head material for long-lasting, high-definition graphics that won’t fade or rub off.

Seamless Design Integration

Patterns seamlessly cover the entire head without interfering with hole placement or sidewall geometry.

The Brine King lacrosse head offers players limitless ways to customize their style this season thanks to an expansive selection of color and graphic options.

With spring right around the corner, lacrosse players everywhere are gearing up for the new season. And for many, that means upgrading their equipment to get a competitive edge on the field. One piece of gear that can make a big difference is your lacrosse head. The head shape, stiffness, and other features all impact how the ball releases, as well as your ability to scoop ground balls and retain possession.

If you’re looking for a high-performance lacrosse head this season, the Brine King should be on your radar. Brine is one of the most trusted brands in lacrosse, with a reputation for quality and innovation spanning nearly a century. The King has been one of Brine’s flagship lacrosse heads for years, beloved by players for its excellent combination of versatility, durability, and value.

Here’s a closer look at 15 of the key features that make the Brine King one of the top lacrosse heads today:

Backed by Trusted Brine Brand Since 1922

Brine has been a leader in lacrosse equipment since 1922, when the company was founded by Richard “Dick” Brine in Cambridge, Massachusetts. Over the past century, Brine has pioneered many innovations in lacrosse gear, including the first plastic lacrosse helmet in the 1970s. Generations of lacrosse players have come to trust the Brine name for quality and performance. The Brine King upholds this long legacy as a premium lacrosse head.

Durable Yet Lightweight Polycarbonate Construction

The Brine King head features a sturdy polycarbonate construction that offers an ideal blend of stiffness, durability, and lightweight feel. Polycarbonate is a strong, rigid plastic that can withstand the demands of faceoffs and aggressive checks. Yet it remains light enough for quick handling and crisp passing.

Strategic Stiffening Ribs Add Support

The sidewalls and scoop of the King head incorporate extra stiffening ribs in strategic places. These structural reinforcements boost the head’s stiffness for added ball control and improved shooting power, without making the head overly rigid. The ribs also strengthen high-stress areas for greater durability.

Octagonal Stopper Improves Stiffness

Rather than the standard circular ball stop found on most heads, the King features an octagonal ball stop. The eight-sided shape prevents the ball stop from warping and increases overall sidewall stiffness. This unique stopper maintains the head’s structure over time for consistent performance.

Customizable Rail Flexibility

The Brine King comes strung with three different flex options, allowing players to choose the suitable rail flexibility for their playing style. Stiffer rails offer more precise shooting and passing, while more flexible rails facilitate better ball control on cradling and scooping. With three rail options in one head, players can restring to fine-tune the flex as needed.

10 Diamond Top String Holes

Players who like to customize their pocket will appreciate the Brine King’s 10 diamond top string holes. This abundance of stringing points allows for endless pocket patterns to suit individual preferences. The versatile stringing setup enables optimal pocket placement for players at any position.

Curved Sidewalls for Excellent Ball Control

Many lacrosse heads today feature straight sidewalls, but the Brine King has curved sidewalls that cradle the ball with precision. The contours improve ball control for cradling, catching difficult passes, and protecting possession on checks. If you value responsive handling, the curved sidewalls are a big plus.

Scoop Designed for Quick Ground Balls

Winning possession battles often comes down to getting ground balls, so the Brine King is engineered with a crescent scoop that excels at picking the ball off the turf. The scoop has a stiff yet slightly flexible design to gobble up grounders while retaining its shape over time. Enjoy lightning-quick ground ball pickup with the King.

Mid-Pocket Placement Ideal for All Positions

The King head comes strung from Brine with a mid-placed pocket, equally suited for attackmen, midfielders, and defensemen. The balanced pocket provides excellent hold on cradling, while still allowing for quick release on passes and shots. With a universal pocket sweet spot, any player can maximize their performance with this head.

Strategic Stringing Holes Prevent Whip

Whip refers to sideways distortion in the head upon impact, which leads to decreased ball control and erratic shooting. To combat whip, the Brine King positions the top string holes close together near the scoop. This stringing setup keeps the top of the head stable for straight release and no whip.

Meets All HS, College, and Pro Specs

The Brine King is designed to meet all the key lacrosse head specifications required for high school, NCAA, and professional play. This ensures the head is legal for competitive use at any level. Players can focus on performing with confidence, knowing the King complies with regulations.

Compatible with Most Shafts

The Brine King universal screw pattern enables the head to be mounted on most lacrosse shafts from major manufacturers. You’re not limited to Brine shafts – the King gives you the versatility to pair with your favorite handle for the ultimate customized setup.

Lightning Bolt Graphics for Signature Style

Brine designed the King with its bold and electrifying lightning bolt motif along the sidewalls. This has become one of the most iconic graphics schemes in lacrosse, giving the head unmistakable style on the field. The eye-catching graphics also make it easy to track the head during play.

Available in a Range of Colors

The Brine King comes in a variety of color options to match team colors or player preference. Along with basic white and black, you can find the head in maroon, navy, royal, yellow, orange, green, and more. With many colors to choose from, it’s easy to customize your look.

Backed by Brine’s 1-Year Warranty

Brine offers a 1-year warranty on the King head for peace of mind. Workmanship and materials are guaranteed for one year from the original purchase date. Brine will resolve any defects that arise during that timeframe. You can play with confidence knowing your head is covered.

When it comes to proven performance and innovation, few lacrosse heads can match up to the Brine King. The trusted Brine brand has engineered this versatile head to offer elite-level attributes like stiffening ribs, curved sidewalls, strategic stringing, and a meticulously designed scoop. For players demanding the most out of their gear this season, the iconic Brine King deserves a spot at the top of your list.

Used by Top Athletes and Lacrosse Programs

As the new lacrosse season approaches, players everywhere are gearing up and looking for ways to upgrade their equipment. One piece that many look to upgrade is the lacrosse head. This important piece of equipment greatly impacts handling, passing, catching, shooting and scooping abilities. With so many options on the market, it can be tricky to decide which lacrosse head is right for your game. One head that consistently rises to the top is the Brine King. Trusted by players at all levels, from youth to college and professional, the Brine King has proven itself as a top choice year after year.

So what makes the Brine King such a popular and effective lacrosse head? Here we’ll explore the top 15 features that set this head apart:

1. Lightweight yet durable construction

Constructed from tough yet lightweight materials, the Brine King provides the best of both worlds – durability and low weight. Players find they can maneuver the head easily while still enjoying a long lifespan. The head holds up well even under intense game play thanks to reinforced sidewalls and screw holes.

2. Strategic stringing holes

The Brine King features strategically placed stringing holes that make it easy to string the head for optimal pocket shape, hold and release. Customizable stringing options let players dial in the perfect pocket configuration for their style of play and preferences.

3. Open sidewall design

The King’s open sidewall design increases ball control and handling. By reducing material on the sidewalls, it allows players to cradle and feel the ball better during play. This improves feel for stick tricks, cradling and passing.

4. Parabolic rail

The parabolic rail shape adds structure while optimizing ball control and release. Its contours give it added stiffness while still allowing for excellent pocket formation. The rail helps guide shots and passes for accuracy.

5. Mid-high pocket placement

With its mid-high pocket placement, the King makes picking up ground balls a breeze. Its pocket allows players to get under the ball easily on scoops. The pocket helps securely trap balls on catches as well.

6. Stiff cross-section

While light, the King maintains a stiff cross-section that adds both durability and improved handling. By optimizing the stiffness-to-weight ratio, it delivers a responsive feel when cradling, passing and shooting.

7. Generous scoop

The King features a generous scoop design that is perfect for ground balls. Its flared shape allows smooth entry of the ball into the pocket, even when picking up balls on the run. The scoop helps get every last ground ball.

8. Precision molded design

Utilizing precision molding, the King delivers excellent consistency and accuracy head to head. Players can count on the same feel and performance from any King head. Consistency is crucial for developing skills and technique.

9. Offset shape

The offset shape of the sidewalls enhances ball control and pocket depth. This improves hold, especially for players who like a deeper pocket. The shape still allows for quick release on shots and passes.

10. Strung with semi-soft mesh

The King comes strung with semi-soft mesh right out of the package. This mesh provides good hold while optimizing ball feel and control. Semi-soft mesh also offers quick break-in so players can maximize performance sooner.

11. Meets all requirements

With its Universal Spec design, the King meets all high school, college and pro requirements for lacrosse heads. Players can use it confidently at any level without worry of incurring penalties.

12. Multiple color options

Available in a range of color combinations, players can select a King to match their gear setup and preferences. Color options include black, blue, green, orange, pink, red, yellow and more.

13. Backed by Brine’s reputation

As part of the Brine family, the King benefits from the company’s reputation for quality and innovation. Brine has been crafting lacrosse gear since 1950 and is trusted by players worldwide.

14. Ideal for all field positions

With its blend of handling, control and release capabilities, the King performs well for players of all field positions – attack, midfield, defense and goalie. It adapts to the needs of any position.

15. Great value

For all its top-tier features and performance, the King remains affordably priced. Players get pro-level quality and capabilities without the premium price tag. This makes it ideal for players of all ages and budgets.

When it’s time to upgrade your lacrosse gear, consider the Brine King. Trusted by players at all levels, this head consistently delivers the performance, durability, and versatility that today’s game demands. With the King in your setup, you’ll be primed for success on the field this season.

As the new lacrosse season approaches, players everywhere are looking to upgrade their gear for maximum performance. One piece of equipment that can make a huge difference is your lacrosse head. And when it comes to lacrosse heads, the Brine King stands out as a top choice for players across attack, midfield, and faceoff positions.

Ideal for Attack, Midfield, and Faceoff Positions

The Brine King lacrosse head is versatile enough to cater to players in different positions. For attack players, its pinched-in scoop and defined sidewall allow superior ball control and quick, accurate shots on goal. Midfielders will appreciate the head’s stiffness for extra power in passes, catches, and shots from farther out on the field. And its stiff construction gives faceoff specialists an advantage at the X.

So what makes the Brine King such an adaptable head for all positions? Here are the top 15 features of this standout piece of lacrosse gear:

1. Stiff yet responsive construction

Brine utilizes a high-grade resin formula to give the King an incredibly stiff feel and structure, without compromising responsiveness. This gives players an ideal blend of control, command, and touch no matter where they play on the field.

2. Strategic sidewall design

The King’s sidewalls extend all the way up to the scoop and feature defined rail shapes. This construction directs pocket formation for optimized ball control and faster, more accurate passing and shooting.

3. Generous scoop

To facilitate easy ground ball pickups, Brine engineered the King with a large, flared scoop. The scoop features defined edges to channel the ball directly into the pocket.

4. Pinched scoop and defined channel

The scoop shape is pinched inward at the center, which centers the ball for quicker transfers to the pocket. The defined scoop channel also enables smooth roll from ground ball to pocket.

5. Mid-profile design

With a mid-level profile, the King provides a balance of ball control and hold with maneuverability. Attackers and midfielders can move the head quickly while maintaining command of the ball.

6. Raised ball stop

The King’s pronounced, raised ball stop gives players superior ball control so they can command possession all over the field. Faceoff players especially benefit from the ability to clamp down on ground balls.

7. Angled sidewall holes

Strategically angled sidewall stringing holes allow midfielders to fine tune pocket depth and shape for optimized feel and performance.

8. Stiff sidewalls

The King’s stiff sidewalls and pronounced ridge supports enable superior stiffness and durability. Faceoff players can maximize clamping power, while attack and midfield players experience enhanced ball control.

9. Generous offset

An offset of 1.5″ from sidewall to top rail gives players a deeper pocket for improved ball control and shot power. Faceoff specialists in particular can achieve maximum pocket depth.

10. Geometric throat design

Brine engineered a geometric profile at the throat of the head, enabling smooth distribution of stress for increased structural integrity.

11. Strategic stringing holes

The stringing holes are thoughtfully positioned to enable players to customize pocket depth and shape for their specific position and playing style.

12. Rail shape supports

Support ridges along the side rails strengthen the overall structure and stability of the head through hustle plays.

13. Lightweight feel

By optimizing the resin formula, Brine developed a stiff yet incredibly lightweight lacrosse head. Players experience quick maneuvers without feeling weighed down.

14. Precision molding

Brine molded the King with an incredibly tight engineering tolerance of 0.005 inches for consistency and reliability across heads.

15. Multiple color options

The King comes in a variety of color combinations so players can coordinate their heads with their school colors or team uniforms.

With its well-engineered design catering to players across positions, it’s easy to see why the Brine King lacrosse head stands atop many players’ wish lists this season. Its versatility and enhanced performance enable athletes to elevate their game to the next level.

So if you’re looking to upgrade your lacrosse gear for the coming season, strongly consider the Brine King head. Let its strategic features work in your favor game after game as you control possession, fire off pinpoint accurate shots, and rule at the faceoff X.

As lacrosse season fast approaches, players everywhere are gearing up and evaluating their equipment needs. One essential piece that can make a huge impact is your lacrosse head. And when it comes to top-notch lacrosse heads, the Brine King stands out as a go-to choice for taking your game to the next level.

Provides the Competitive Edge to Dominate Games

The Brine King lacrosse head gives you the tools you need to overpower opponents and control the field. Optimized for performance across positions, it provides the ball control, shooting accuracy, and rock-solid reliability to conquer every match. Let’s dive into the top features that make this head such a game-changing asset:

1. Strategically stiffened sidewalls

Brine utilized a proprietary resin formula to create stiff yet responsive sidewalls on the King head. This unique blend of stiffness and flexibility gives you ultimate command over the ball during intense gameplay.

2. Defined scoop and channel

With its pinched-in scoop shape, the King quickly funnels ground balls right into the pocket. The defined channel creates a smooth rolling transition from ground ball to stick.

3. Pronounced ball stop

The raised ball stop on the King promotes superior ball control and possession. Faceoff players in particular can clamp down on ground balls to gain an edge.

4. Mid-level profile

The King strikes an ideal balance between ball retention and maneuverability with its mid-profile design. Attackers and midfielders can whip the head quickly while maintaining command of possession.

5. Angled sidewall holes

Smartly angled sidewall holes allow you to fine tune pocket depth and shape for optimized feel and response. Dial in the exact sweet spot for your position.

6. Ample scoop area

With its generous flared scoop area, the King makes ground ball pickup a breeze. The defined edges guide balls straight into your pocket.

7. Durable, rigid sidewalls

The King’s rigid sidewalls stand up to hacks and slashes while clamping down on ground balls. The pronounced ridge supports enhance frame stiffness for domination at the X.

8. Superior offset

An offset of 1.5 inches from sidewall to top rail allows for extra pocket depth and ball control. Faceoff specialists gain an advantage with maximum pocket volume.

9. Strategic stringing holes

Thoughtfully placed stringing holes let you customize pocket depth and shape to match your position and preferences.

10. Geometric throat design

The geometric profile engineered around the throat enables even stress distribution for improved overall durability.

11. Rail shape supports

Support ridges lining the side rails bolster the head’s structural integrity through busy gameplay and frequent contact.

12. Featherlight feel

Brine optimized the resin formula to create an ultra lightweight lacrosse head with impressive stiffness. Maneuver the head quickly without extra weight dragging you down.

13. Extreme precision molding

With an incredibly tight 0.005 inch engineering tolerance, the King delivers reliable consistency and performance across heads.

14. Multiple color options

Choose from a variety of stylish color combinations to match your team uniforms and aesthetic.

15. Total versatility

From attack to midfield to faceoff specialist, the King provides advantages for athletes across positions. Its features let you optimize play.

When looking to amp up your lacrosse game and get a leg up on the competition, turn to the Brine King head. With its smart design catering to today’s aggressive, fast-paced play, the King delivers the tools to take command of the field and opponent. Let it help you own possession, fire off pinpoint accurate shots, and rule at the X this season.