Why are face shields crucial for lacrosse players. How do they prevent eye injuries and reduce concussion risks. What key features should you look for when choosing a lacrosse face shield. Which types of shields are available for lacrosse helmets.

The Importance of Face Shields in Lacrosse

Lacrosse is a high-intensity sport known for its physical nature and fast-paced action. With sticks swinging and balls flying at high speeds, player safety is paramount. While helmets with cages offer significant protection, adding a face shield can provide an extra layer of defense against potential injuries.

Eye Injury Prevention

One of the primary benefits of face shields is their ability to prevent eye injuries. Lacrosse balls can travel at speeds exceeding 100 mph, posing a serious threat to players’ eyes. A face shield acts as a barrier, protecting against various eye-related injuries, including:

• Corneal scratches or cuts
• Trauma to eye socket bones or muscles
• Detached retinas
• Eye socket fractures
• Permanent vision damage or loss

Additionally, face shields offer protection against accidental high stick hits, which are common in crowded situations around the goal.

Concussion Risk Reduction

Face shields play a crucial role in reducing concussion risks. Studies have shown that shields can minimize the impact forces to the brain by preventing direct hits to the face. Given the constant physicality in lacrosse, including defensive checks, midfield battles for ground balls, and offensive jostling near the net, the added protection of a face shield can significantly decrease the chances of concussion.

Enhanced Player Confidence

With a face shield in place, players can compete more aggressively without the constant worry of facial injuries. This added confidence allows defenders to throw checks, dive for ground balls, and slide into passing lanes with less hesitation. Offensive players can make harder cuts to the goal and drive to the net for shots. For younger players especially, this peace of mind can help them focus on skill development and competition rather than injury concerns.

Key Features to Consider in a Lacrosse Face Shield

When selecting a face shield for your lacrosse helmet, several factors should be taken into account:

1. Vision: The shield should provide a wide field of vision with minimal obstruction or distortion. Look for optically correct polycarbonate or wire cage shields.
2. Coverage: Ensure the shield covers the entire eye area from eyebrows to cheekbones for maximum protection.
3. Durability: Opt for ultra-strong shields made from materials like titanium that can withstand impact.
4. Fog resistance: Many shields feature fog-resistant coatings to maintain clarity even during intense play.
5. Compatibility: Choose a shield specifically designed to fit your helmet model.
6. Certification: Select shields that meet safety standards such as NOCSAE or HECC.

Reputable brands like Cascade and Warrior offer shield options that meet these criteria. It’s advisable to work with a knowledgeable lacrosse equipment retailer to find the right visor for your needs.

Types of Lacrosse Helmet Shields

There are several types of face shields available for lacrosse helmets, each with its own set of advantages:

Polycarbonate Shields

Polycarbonate shields are made from a strong, shatter-resistant plastic. They wrap around the face opening of the helmet, providing excellent protection for the eyes and upper face. These shields offer a clear, unobstructed view of the field and are lightweight, making them a popular choice among players.

Wire Cage Shields

Wire cage shields consist of a metal grid that covers the face area. They offer superior ventilation and are less prone to fogging compared to solid shields. While they may slightly obstruct vision due to the wire structure, many players prefer them for their durability and breathability.

Hybrid Shields

Hybrid shields combine elements of both polycarbonate and wire cage designs. They typically feature a clear polycarbonate section for the upper face and eyes, with a wire cage covering the lower face and mouth area. This combination provides excellent visibility and protection while allowing for better airflow.

Benefits of Adding a Face Shield to Your Lacrosse Helmet

Incorporating a face shield into your lacrosse gear offers numerous advantages:

• Enhanced protection against eye injuries and facial trauma
• Reduced risk of concussions
• Increased player confidence and aggressive play
• Improved focus on skill development and competition
• Added peace of mind for players and parents

By providing an extra barrier against potential harm, face shields allow players to fully engage in the game without holding back due to injury concerns.

Choosing the Right Face Shield for Your Playing Style

Different playing positions and personal preferences may influence your choice of face shield. Consider the following factors when selecting a shield:

Position-Specific Considerations

Attackers and midfielders may prefer shields with excellent visibility and minimal obstruction, such as clear polycarbonate shields. Defenders, who are more likely to face checks and physical contact, might opt for more robust protection offered by wire cage or hybrid shields.

Climate and Playing Conditions

If you frequently play in hot or humid conditions, a wire cage or hybrid shield may be more suitable due to better ventilation. For colder climates or indoor play, a solid polycarbonate shield might be preferable for its fog-resistant properties.

Personal Comfort and Adaptation

Some players may find certain shield types more comfortable or easier to adapt to than others. It’s essential to try different options and give yourself time to adjust to the added protection.

Maintaining and Caring for Your Lacrosse Face Shield

Proper maintenance of your face shield is crucial for ensuring its longevity and effectiveness. Follow these tips to keep your shield in top condition:

• Clean the shield regularly with mild soap and water
• Avoid using abrasive materials or harsh chemicals that could damage the shield
• Inspect the shield for cracks, chips, or other damage before each use
• Replace the shield if it shows signs of significant wear or damage
• Store your helmet with the shield attached in a cool, dry place away from direct sunlight

By taking good care of your face shield, you can ensure it continues to provide optimal protection throughout your lacrosse career.

The Future of Lacrosse Face Shield Technology

As sports technology continues to advance, we can expect to see innovations in lacrosse face shield design and materials. Some potential developments include:

Smart Shields

Future face shields may incorporate sensors to detect and measure impacts, providing real-time data on potential concussion risks. This information could be invaluable for coaches and medical staff in monitoring player safety.

Advanced Materials

Research into new materials may lead to shields that offer even better protection while being lighter and more comfortable. These could include impact-absorbing polymers or advanced composites that provide superior strength-to-weight ratios.

Customization Options

3D printing technology may allow for fully customized face shields tailored to individual player’s facial structures and preferences. This could result in improved fit, comfort, and protection.

As these technologies develop, lacrosse players can look forward to even safer and more effective face shield options in the coming years.

Integrating Face Shields into Youth Lacrosse Programs

Encouraging the use of face shields in youth lacrosse programs can have a significant impact on player safety and development. Here are some strategies for implementing face shield use at the youth level:

Education and Awareness

Educate players, parents, and coaches about the benefits of face shields and the types of injuries they can prevent. This knowledge can help create a culture of safety within the sport.

League Policies

Consider implementing league-wide policies that require or strongly encourage the use of face shields for all players. This can help normalize their use and ensure consistent protection across teams.

Gradual Introduction

For leagues or teams new to face shields, consider a phased approach. Start by requiring shields for younger age groups and gradually extend the requirement to older players. This can help ease the transition and allow players to adapt over time.

Equipment Assistance Programs

Develop programs to assist families in acquiring face shields, such as equipment exchanges or subsidies. This can help ensure that all players have access to this important safety equipment, regardless of financial constraints.

By prioritizing face shield use in youth lacrosse, we can help create a safer environment for young players to develop their skills and enjoy the sport.

Why a Face Shield is Important for Lacrosse Players

If you’ve ever stepped onto a lacrosse field, you know that it can be a rough and tumble game. Sticks are swinging, balls are flying, and contact is a big part of the sport. That’s why protective gear is so important for lacrosse players at all levels.

One piece of protective gear that is often overlooked but can make a huge difference is a face shield or visor attached to the lacrosse helmet. While a helmet with a cage offers protection, adding a shield can provide an extra layer of defense against potential eye injuries and concussions.

Preventing Eye Injuries

Lacrosse sticks have narrow pockets that can fling a hard rubber ball at speeds over 100 mph. A ball or stick hitting a player in the eye area could lead to some serious damage. A visor can help block those shots and prevent eye injuries like:

• Scratches or cuts on the cornea
• Trauma to the eye socket bones or muscles
• Detached retinas
• Fractures of the eye socket
• Permanent vision damage or loss

A stray high stick to the face is another danger. As players run down the field with their sticks upright for passing and shooting, the chances of an accidental stick to the face increase, especially in crowd situations around the goal. A shield provides a barrier to deflect those potential stick hits.

Reducing Concussions

In addition to eye protection, a face shield offers increased protection against concussions. Studies have shown that shields reduce the risks of concussions in athletes by preventing direct hits to the face and reducing impact forces to the brain.

The pace of lacrosse with its constant physicality between players makes head injuries a real concern. Defenders throwing checks, midfielders battling for ground balls, and offensive players jostling for position in front of the net all contribute to potential concussions. A visor is one way to minimize the chances of that happening.

More Confidence to Play Aggressively

Having a shield in place gives players more confidence to play aggressively without worrying as much about facial injuries. Defenders can throw checks, take chances diving for ground balls, and slide into passing lanes without hesitation. Offensive players can cut harder to the goal and drive to the net for shots.

That extra bit of protection allows everyone to play with intensity. Younger players especially gain peace of mind knowing their face has an extra barrier against potential sticks, elbows, and balls. They can focus more on developing skills and competing instead of worrying about injuries.

What to Look for in a Lacrosse Face Shield

When choosing a face shield for your lacrosse helmet, keep these key factors in mind:

• Vision – The shield should offer a wide field of vision with minimal obstruction or distortion. Look for optically correct polycarbonate or wire cage shields.
• Coverage – Shields should cover the entire eye area from eyebrows to cheekbones for maximum protection.
• Durability – Find ultra-strong shields made from materials like titanium that can handle impact.
• Fog resistance – Many shields have fog-resistant coatings to maintain clarity even when you sweat.
• Compatibility – Make sure the shield is designed specifically to fit your helmet model.
• Certification – Choose shields that meet safety standards like NOCSAE or HECC.

Reputable companies like Cascade and Warrior offer shield options that check these boxes. Work with a knowledgeable lacrosse equipment retailer to select the right visor for you.

Helping You Play Your Best

Lacrosse is meant to be an intense, fast-paced game played with controlled aggression. Adding a face shield to your helmet allows you to play the game the way it was meant to be played, without holding back out of fear of facial injuries.

The extra protection gives you confidence to compete hard every possession. While the shield isn’t a guarantee against concussions or eye injuries, it provides an important extra barrier. That added safety precaution helps you focus on playing your best lacrosse while reducing worries about potential harm.

So if you want to take your lacrosse game to the next level this season, consider attaching a high-quality face shield to your helmet. It allows you to play with intensity and could help prevent a serious injury that keeps you off the field.

Types of Lacrosse Helmet Shields Available

When suiting up for lacrosse, your helmet is one of the most important pieces of protective gear. Adding a face shield provides an extra layer of defense against potential injury. There are a few main types of shields to consider attaching to your lacrosse lid.

Polycarbonate Shields

Polycarbonate is a strong, shatter-resistant plastic that makes excellent visors. Polycarbonate shields wrap around the face opening of the helmet to protect the eyes and nose area. This full coverage design blocks shots and checks from all angles.

Polycarbonate is optically corrected, so it doesn’t distort vision like lower quality plastics. It also resists fogging thanks to hydrophobic coatings that cause water droplets to bead up and run off the surface.

Brands like Cascade and STX use polycarbonate for their lacrosse visors. The material is lightweight yet highly impact resistant. Polycarbonate shields meet safety standards like the HECC and CE EN166 B standards.

Wire Cage Shields

Wire cage shields consist of vertical metal bars spaced evenly apart and connected by horizontal wires along the top and bottom. The open bar design provides wide peripheral vision with minimal obstruction.

Common cage materials include steel, aluminum, and titanium. Titanium offers the best strength-to-weight ratio for absorbing high speed impacts. It’s also rust-proof.

Some cages have thicker framing bars at key impact zones around the eye area for added protection. Brands like Warrior and Gait lacrosse integrate wire cage shields into their helmet designs.

Hybrid Shields

Hybrid shields combine polycarbonate and wire cage elements. Typically, they feature an upper portion made of rounded polycarbonate with an open wire cage on the lower half.

The polycarbonate top blocks overhand shots while the wire section maximizes downward vision for seeing outlet passes, ground balls, and your stick handling. Hybrids aim to provide the protective coverage of solid visors with improved ventilation and sight lines.

Cascade’s Pro Fit Hybrid Shield is a popular option, as is Warrior’s titanium Regulator 2 hybrid shield. The composite design offers solid protection without total vision obstruction.

Considerations When Choosing a Shield

With different shield types available, keep these key factors in mind when selecting one for your helmet:

• Vision – Look for minimal distortion with a wide, unobstructed field of view.
• Ventilation – Proper airflow is key; opt for shields with openings if you tend to overheat.
• Fog resistance – Shield coatings help prevent vision clouding from sweat and humidity.
• Helmet compatibility – Make sure the shield fits your specific helmet model.
• Certified protection – Choose shields that meet NOCSAE, CE, and HECC standards.
• Durability – The shield must withstand repeated hard ball and stick impacts.

Trying on different shield styles with your helmet can help determine the right visual field, ventilation, and fit. Shop with reputable lacrosse companies to find shields that maximize protection and optical clarity.

Protect Your Moneymaker

Your face and eyes are vulnerable in the fast-paced, high-contact sport of lacrosse. Getting hit with a 60+ mph shot or flailing stick can lead to serious injury and time away from the game.

Adding a high-quality shield tailored for lacrosse helps provide an extra defensive barrier. Polycarbonate, wire cage, and hybrid shields all have their advantages depending on your preferences and needs.

With a shield protecting your face, you can play confidently knowing your head and eyes have improved protection. You can check, pass, catch, cut, and shoot without hesitation. A shield gives you peace of mind to play all out and take your game to the next level.

Whether you want crystal clear vision, superior impact resistance, or optimal breathability, there’s a lacrosse helmet shield designed for you. Protect your moneymaker and enjoy the game without worrying about facial injuries.

Features to Look for When Buying a Shield

Adding a face shield to your lacrosse lid provides vital protection for your eyes and face. With defenders slashing their sticks and shooters winding up for 100+ mph shots, you want the best shield possible.

But with many options on the market, it can be tricky to select the right one. Here are key features to look for when buying a face shield for lacrosse:

Optical Clarity

A shield does you little good if it distorts vision and obstructs your field of view. Look for shields made from optically corrected materials like polycarbonate that won’t bend light or make you feel like you’re viewing the field through a fishbowl.

The shield should offer a wide peripheral view so you can spot teammates and opponents without major head movement. It should be free from visual defects and provide crisp, undistorted vision.

Impact Resistance

Lacrosse shots and checks can generate massive force, so your shield needs to hold up. Seek out ultra-strong materials designed to withstand high velocity impacts.

Polycarbonate is a wise choice thanks to its durability and flexibility to absorb shock without cracking. Aircraft grade aluminum or titanium shields offer superior strength at a lighter weight than steel.

Look for shields that meet safety certification standards like NOCSAE, CE or HECC, which require passing impact resistance tests.

Fog Resistance

Nothing wrecks your vision faster than a fogged up shield, especially on hot, humid days. Seek out shields treated with anti-fog coatings that cause water to bead up and run off the surface without clouding.

These fog-fighting shields let you play with clarity no matter how much you sweat. Keep an anti-fog spray as backup for additional fog protection when needed.

Ventilation

Proper airflow is crucial when playing an intense sport with a helmet and shield on. Solid polycarbonate shields can get hot, so look for options with ventilation slits or holes if you tend to overheat.

Wire cage shields offer maximum breathability while still protecting against sticks and balls. Or choose a hybrid shield blending the coverage of polycarbonate with a lower wire cage section for airflow.

Helmet Compatibility

Your shield needs to integrate seamlessly with your helmet model for proper fit and protection. Most shield manufacturers design models specifically to fit key brands and helmet geometries.

Do your homework to ensure the shield pairs with your helmet. A knowledgeable lacrosse equipment retailer can help you match the right shield to your lid.

Secure Attachment

It’s crucial for the shield to connect snugly to your helmet so it stays locked in place. Look for shields with easy yet robust clip systems to keep the visor firmly attached even after hard collisions.

Well-designed shields fit flush with the helmet shell for full coverage and no gaps around the edges. Padding along contact ridges provides a tight seal and added comfort.

Consider shields that let you detach and switch sides for custom visibility or reversible durability.

Value

Lacrosse shields range widely in cost from budget to premium models. While an expensive titanium shield offers best-in-class protection, a budget polycarbonate version still provides substantial impact resistance.

Set a spending limit, then get the most durable shield offering superior optics and breathability for the money. With your face on the line, now’s not the time to cut corners.

Keeping these factors in mind helps ensure you select a high-performing visor that shields your eyes while enabling great vision. Protect your head in style and see the game with maximum clarity.
Here is a 1000+ word article comparing the pros and cons of visor vs cage lacrosse helmet shields:

Visor vs Cage Shield Pros and Cons

When outfitting your lacrosse lid with a protective shield, you’ll need to decide between a solid visor or open cage style. Both have benefits and drawbacks to weigh.

Polycarbonate visors provide full facial coverage while metal wire cages maximize ventilation and sight lines. Here’s an overview of the pros and cons of each shield type.

Visor Shield Pros

• Full face protection from frontal impacts
• Usually optically correct for undistorted vision
• Lightweight yet highly impact resistant
• Many feature anti-fog and scratch-resistant coatings
• Wraparound coverage shields eyes and nose from all angles
• Flush fit Integration with helmet for seamless protection

Visor Shield Cons

• Can obstruct downward peripheral vision
• Less ventilation can lead to interior fogging
• Overheating is a risk in hot weather
• Polycarbonate prone to scratching over time
• High replacement cost if broken

Cage Shield Pros

• Open bar design provides wide peripheral vision
• Maximum ventilation for airflow and cooling
• Durable metal materials withstand high impacts
• Lower replacement cost than visors
• Bars naturally deflect shots and sticks

Cage Shield Cons

• Less facial coverage with gaps between bars
• Ball can penetrate cage openings if hit just right
• Obstructed frontal vision looking straight ahead
• Metal bars prone to bending after repeated impacts
• Rusting potential with steel cages

When choosing between visor and cage designs, consider your playing style and priorities:

• Vision needs – Cages optimize peripheral view while visors offer clearer straight-ahead optics.
• Ventilation – Cages maximize airflow while visors can get hot and foggy.
• Facial coverage – Visors protect eyes, nose from all angles while cages have gaps.
• Durability – Metal cages resist damage better but polycarbonate visors handle frontal impacts.
• Cost – Cage shields are cheaper to replace than cracked visors.

Go with a cage if ventilation, cost, and peripheral vision are top concerns. Choose a visor for ultimate facial protection and optical clarity head-on.

Best of Both Worlds

You can also get the best of both shield worlds with a hybrid visor-cage combo. These feature an upper visor made of rounded polycarbonate with an open wire cage on the lower section.

Hybrid shields give you frontal coverage up top while the cage maximizes airflow and downward vision. Brands like Cascade and Warrior make quality hybrid options.

Consider attaching the shield to your helmet and trying it on to get a feel for the fit, visibility, and protection. Ensure the shield securely connects to your helmet model for full integrative protection.

Weigh your priorities in terms of vision, ventilation, cost, and protection. Lacrosse can be a rough sport, so keep your eyes and face covered with a high-quality shield designed for your needs.

Top Brands for Lacrosse Helmet Shields

Face shields have become an increasingly popular accessory for lacrosse players looking to add an extra layer of protection to their helmets. As the game has gotten faster and more physical over the years, players are wise to equip themselves with the best eye protection possible. Let’s take a look at some of the top brands making lacrosse helmet shields and what sets them apart.

Cascade

Cascade is one of the powerhouses in lacrosse equipment, so it’s no surprise they make a variety of high-quality shield options compatible with their helmets. The Cascade LX shield features an anti-scratch lexan polycarbonate material that’s extremely impact-resistant. It attaches securely to the helmet with a simple clip system. For maximum coverage, go with their Pro Shield max, which wraps around the sides of the opening. Cascade shields come in a wide range of tint levels to accommodate different light conditions.

STX

STX is another giant in the lacrosse world known for their engineered lineup of gear. Their Stallion shield is a top choice that focuses on maximizing vision while protecting from debris. Made from shatter-resistant polycarbonate, it’s durable enough to last season after season. The Stallion attaches easily to STX helmets without any tools required. For a bit more protection, check out the F18 shield that comes down the sides more. STX offers an anti-glare option as well as mirrored tints.

Warrior

Known for their innovative lacrosse sticks, Warrior also produces a varied line of shields. The Empire shield locks securely into Warrior helmets without obscuring peripheral vision. Its distortion-free design provides a clear view of the field. For additional coverage, the Empire S shield extends farther down the sides. Both are made from a resilient polycarbonate material and come in multiple tint levels. The green tint is a popular choice for enhancing contrast on the field.

Sport Helmets

This relative newcomer to the lacrosse gear scene has made a name for themselves with their ShockShield line. Made to universally fit most manufacturers’ helmets, their anti-scratch shields are engineered to withstand even the hardest shots. Sport Helmets offers options with varying levels of wrap-around protection. For optimal visibility, go with the ShockShield Original that attaches securely with an adjustable strap. Or for expanded coverage, try the ShockShield Wide version.

Other Brands

In addition to these major players, a number of other brands create quality shields compatible with all different helmet makes and models. The PowerShield line from PowerLacrosse features an anti-fog max coverage curved design made to take hard impacts. For a budget-friendly option, check out the Trinity Shield from StringKing. Its simple strap system promises a universal fit. There’s also the Hammer Shield from Maverik that contours perfectly to their helmets without getting in the way during play.

No matter what brand you prefer, always make sure to select a shield certified by the National Operating Committee on Standards for Athletic Equipment (NOCSAE). This guarantees it meets stringent safety and performance standards. Beyond the brand name, consider the shape, tint, fit, and overall vision clarity when choosing your face shield.

At the end of the day, any added eye protection is better than none when stepping on the lacrosse field. A quality shield combined with the required helmet cage can go a long way in preventing avoidable injuries. As the game trends towards more speed and physicality, a shield offers an affordable way to give players an extra sense of security. Just make sure that adding a shield doesn’t lead to overconfidence during play. No protective equipment can prevent all injuries and concussions. But equipping yourself with well-fitting, high-performance gear from a trusted brand is a smart way to minimize risk and enhance enjoyment of this great sport.

Measuring Your Helmet to Find the Right Size Shield

Adding a face shield to your lacrosse helmet is a great way to boost protection, but getting the sizing right is crucial. An ill-fitting shield can be a nuisance that obscures vision and constantly needs adjustment. Or worse, a poorly-sized shield offers inadequate coverage and impaired safety. Here’s a quick guide on properly measuring your helmet so you can find a lacrosse shield that fits just right.

Know Your Helmet Brand and Model

The first step is identifying the specific brand and model of your helmet. Popular brands like Cascade, STX, and Warrior often design shields specifically contoured to fit their helmet lines. So knowing your helmet’s make allows you to find a shield tailored to properly integrate with it. Additionally, some brands use proprietary clipping systems or strap placements that require brand-specific shields. Write down your helmet’s brand and model name before heading online or to the sporting goods store.

Measure Your Helmet Opening

This is the most important dimension to get right! Using a soft measuring tape, carefully measure the width of your helmet’s face opening from edge to edge in inches or centimeters. For best results, remove any cage so you can get an accurate read on the true opening size. Compare this measurement against the sizing chart for the shield you’re considering. Pay close attention to whether the shield uses the actual viewable opening or the total width including edge flanges in its specs. Buy a shield that matches your helmet opening width as closely as possible.

Account for the Lower Edge Shape

Helmet openings come in different shapes on the lower edge. Some maintain an even horizontal width across while others angle inward towards the chin. Shields meant for angled openings need to be contoured properly to account for this. So take note of your helmet’s lower shape and buy a shield made to align with it. An angled shield on an even opening or vice versa will leave exposed gaps.

Consider Your Peripheral Vision Needs

Think about whether you want just basic straight-on protection or more wrap-around coverage for the sides of your vision. Most brands offer shield options in different coverage ranges. Measure how far over from center you want the shield to come on each side in inches. Compare to shield specs to find one that provides your desired peripheral extent.

Account for Helmet Vent Slots

If your helmet has ventilation slit openings along the front, make sure any shield you get is designed to avoid blocking these. Some shields have small indentations or notches built in to allow continued airflow to vents. Check that vent placement on your helmet matches up with the shield vent cutouts.

Try It On for Fit

Once you’ve used your measurements and considerations to select a shield, the final step is to put it on your helmet and test the fit. Clip or strap it into place per the manufacturer instructions and then gauge the coverage, vision adjustment needs, and overall integration. Move your head around while wearing it to check for any gaps, instabilities, or obscuring of sight lines. A rough fit can often be remedied with some slight shifting or bending adjustments to get that custom aligned feel.

Getting precise with measuring and matching ensures your new lacrosse helmet shield offers maximum eye protection and visual clarity. A snug, gap-free fit also means the shield stays put without constant fussing during intense game action. Take the time upfront to get the sizing right so that you can suit up with confidence in quality eye protection that integrates seamlessly into your helmet.

Installing the Shield onto Your Helmet

Adding a face shield to your lacrosse helmet is a great way to protect your face during those intense game situations. However, you can’t just strap any old shield onto your lid. There are some important steps to take to make sure you get the right shield and install it properly for maximum safety and comfort on the field.

First things first – you need to get the right shield for your particular helmet model. Face shields come in different shapes and sizes to fit the varied helmet designs on the market today. Brands like Cascade and Warrior have their own shields made to seamlessly work with their gear. If you try to force on a shield not designed for your helmet, it likely won’t fit right and could potentially compromise protection. Always check the manufacturer specs to find a shield verified as helmet-compatible.

Once you’ve got the right shield for your helmet, it’s time for installation. Thankfully, it’s a pretty straightforward process. Most shields these days use a simple clip system to attach onto the helmet. Start by locating the clip receptors along the left and right sides of your helmet, generally around eye/ear level. Then take the shield clips and slide them into the receptors until they snap securely into place. Give the shield a gentle pull to make sure it’s solidly connected.

With the main clips installed, next you’ll want to adjust the tension dial located at the rear base of the shield. Turn the dial to tighten or loosen the overall fit. Tightening will pull the shield closer to your face, while loosening gives a bit more breathing room. Find the setting that keeps the shield stable but comfortable based on your preference.

At this point your shield should be mounted and ready to use. But before taking it onto the field, do a quick double check that everything is fitted properly. Are the clips fully inserted and locked? Does the shield feel secure when you carefully try to wiggle it? Give it a test with some head movement too. Nod your head up and down and turn side to side. The shield shouldn’t be loose or impede your vision as you move around. Make any tension adjustments needed until you find that sweet spot.

It’s also a good idea to check your helmet straps with the shield on. You may need to tighten things up a bit to adapt to the new size and weight. Get all the adjustments dialed in so when you put on that helmet, everything feels balanced and secure.

Once set up, getting used to a face shield takes some practice. At first it can feel restrictive having that plastic in front of your eyes. So wear it around for short periods to get acclimated. Gradually work your way up to keeping it on for entire practices and scrimmages. The more time you spend in the shield, the more natural it will become.

A face shield is mandatory for goalies in lacrosse, but field players have the option of wearing one for enhanced facial protection. Adding a shield takes some extra preparation, but taking those steps will help you wear it safely and comfortably. With the right fit and adjustments, it can give you the confidence to play hard knowing your face is protected from errant sticks and balls. Just be sure to take care of the shield by cleaning sweat and grime off it regularly so you maintain clear vision during game action.

Tips for Shield Maintenance

• Wash with mild soap and water after each use
• Avoid harsh cleaners that can scratch or damage the plastic
• Inspect for cracks in the shield before each use
• Replace immediately if any cracks appear
• Store out of direct sunlight when not in use

Adding some extra protection to your lacrosse helmet is a smart move, especially for competitive high school and college players facing faster shots. With the right face shield properly installed, you can play your game with confidence knowing your moneymaker is guarded! Just take the time to find a compatible shield, dial in the fit, and get used to having it on through regular practice. And be sure to take care of your shield so you always have clear vision. Protect that face and dominate the field!

Taking Care of Your Shield – Cleaning and Storage

Adding a face shield to your lacrosse helmet is a great way to get some extra protection out on the field. But like any piece of gear, a shield needs proper care and maintenance to keep it in tip-top shape. Here’s what you need to know about cleaning, storing, and generally taking care of your lacrosse helmet shield.

Give it a Post-Game wipe down

After each time you use your shield on the field, be sure to give it a thorough wipe down. Dirt, sweat, and oils from your skin can build up over time and degrade the material. Use a soft microfiber cloth dampened with warm water to gently wipe away any grime. Avoid using harsh cleaners or abrasive cloths that could scratch the surface. Pay extra attention to the edges and curves of the shield that tend to collect the most gunk.

You may also want to use a sanitizing wipe designed for sports gear to kill any bacteria that could be lingering after a hard-fought match. Just be sure to rinse afterward with a damp cloth to avoid any chemical residue building up over time. Let the shield fully air dry before putting it into storage.

Deep Clean as Needed

In addition to post-game wipe downs, plan to give your shield a more thorough cleaning session periodically. About once a month is a good rule of thumb, depending on how often you play. Fill a clean sink or large tub with warm water and add a small amount of mild dish soap (nothing too harsh!). Gently scrub the entire surface of the shield with a soft brush and rinse thoroughly with fresh water. Go over it once more with a sanitizing wipe just to be safe. Let air dry completely before storing.

If you notice any stubborn marks or scuffs that don’t come off with regular cleaning, try using a tiny dab of toothpaste as a mild abrasive polisher. Gently rub it into the mark using small circular motions with a soft cloth. Rinse and dry. Repeat if needed, but take care not to over-scrub or you could risk scratching the surface.

Keep it Protected

When it’s time to stow your shield away between games, keep it safe from scratches, dings, and dust. Slip it into the carrying case that came with your helmet for full enclosure. Or place a soft helmet bag over the shield. If space is tight, wrap it gently with a clean microfiber towel or jersey.

If possible, store your helmet upright on a shelf rather than tossing it in a crowded gear bag. And never stack heavy gear on top that could crush it! If you notice any big scratches or cracks form, it may be time to replace the shield so you can keep your eyes fully protected.

Avoid Chemicals and Heat

When caring for your shield, beware of exposing it to any harsh chemicals or extreme heat that could cause hazing, cracking, or brittleness over time. Avoid keeping gear bags in hot cars for extended periods. Don’t use strong cleaners like ammonia, bleach, or alcohol-based products.

Chemical fumes can also be damaging, so keep your shield away from areas like workshops or garages between uses. And never try to modify or alter your shield in any way from its original condition. Things like paint or inks can seep into the material and cause damage.

Replace as Needed

With repeated use and care over time, it’s normal for any face shield to show some wear and tear. Small surface scratches are usually just cosmetic and won’t inhibit protection. But deep gouges, cracks, or cloudiness mean it’s time to swap in a fresh shield.

Plan on replacing your shield about once a season if you play and practice regularly. An older shield with degraded optical clarity can make it hard to see and react quickly on the field. Don’t take chances with your vision! Keep an extra new shield on hand so you can easily swap it in when needed.

Think Beyond Games

Don’t forget that your lacrosse helmet and shield also need TLC between seasons during storage. Make sure all gear is fully cleaned beforehand. Keep your stick bag or helmet box in a climate-controlled storage area, not the attic or damp garage.

Before the new season starts, inspect your shield closely for any cracks or cloudiness that may have developed during the off months. Fog a new shield with your breath and see if it stays cloudy – a failing anti-fog coating means it’s time for a fresh one. Take care of your shield so it can keep taking care of you!

Adding a shield is a great way to ramp up protection for your next box lacrosse match or summertime field tournament. Just be sure to care for it properly so it stays in top shape all season long. Give your shield the occasional TLC it needs, and it will keep your eyes clear and head safe during those hard battles for the goal.

Replacement Parts for Shields – Clips, Screws, etc.

If you’ve added a face shield to your lacrosse helmet, you’ll want to make sure you have any spare parts on hand for quick repairs. Things like hardware and mounting clips can get lost or break over time. Having the right replacement components ready to go will let you get your shield securely reattached and get back in the game fast.

Shield Mounting Clips

One of the most commonly replaced parts on a lacrosse helmet shield are the mounting clips. These plastic clips snap or screw onto the facemask and have slots that hold the shield in place. They absorb impact and let the shield pivot when needed. But after repeated checks and field collisions, clips can crack or pop off.

Keep extras of the exact clips that came with your helmet on hand so you can swap damaged ones out seamlessly. Bring spares to games and practice just in case. Make sure replacement clips are from the shield manufacturer and match the style of your facemask to ensure proper fit and function.

Pivoting Screws

Some shields attach to the helmet and mask using adjustable pivoting screws instead of clips. These screws allow you to dial in the ideal angle and tension for your shield. But over time, the pivot action can loosen or the threads can strip out.

Know the sizing and thread pattern of the original screws so you can replace any that become damaged or lost. Keep extras in your bag for quick swaps during gameplay if needed. Proper tension and angles are important for protection, so replace stripping screws right away.

Visor Screws and Grommets

If your shield has a removable visor section, pay attention to the screws and grommets that hold it in place. The constant pivoting action can cause these smaller hardware pieces to vibrate loose or get knocked free after hard checks.

Know the specific sizing and hardware needed for your visor so you can replace any missing or damaged pieces right away. The visor screws directly into the shield frame at the right tension, so using the manufacturer’s original screws is important.

Anti-Fogging Kits

Over time, the anti-fog coating on your shield can wear off from repeated use and cleaning. This causes annoying fogging that obscures your vision on the field. Many shield makers sell replacement anti-fogging kits to renew that crystal clear protection.

Simply clean and lightly sand your shield first to prep the surface. Then apply the defogging solution as directed. Be careful not to over-sand, which could scratch or haze the shield. With fresh anti-fogging applied, your view will be clear even on hot, humid game days.

New Shields

No shield lasts forever, especially after high-intensity box or field lacrosse action. After a season or two of play, it may simply be time to replace the whole shield altogether if it’s very scratched or cracked.

Many brands sell replacement shields sized and vented specifically for your helmet model. Swapping in a fresh new shield gives you crisp, undistorted vision and protection. Just be sure to transfer over any hardware clips or screws from your old shield for proper mounting.

Chin Straps

Don’t forget that the chin strap is also crucial for keeping your helmet and shield securely in place. The strap takes a lot of tugging and abrasion during games. So inspect its condition closely and keep spare adjustable straps on hand for replacing stretched out or broken ones.

Install any replacement parts carefully by following the manufacturer’s instructions. You want to be sure they are positioned and tensioned exactly right for full function and safety. With a few key spare parts at the ready, you can keep your helmet shield on its game all season long.

Think Beyond Games

Don’t forget that your lacrosse helmet and shield also need TLC between seasons during storage. Make sure all gear is fully cleaned beforehand. Keep your stick bag or helmet box in a climate-controlled storage area, not the attic or damp garage.

Before the new season starts, inspect your shield closely for any cracks or cloudiness that may have developed during the off months. Fog a new shield with your breath and see if it stays cloudy – a failing anti-fog coating means it’s time for a fresh one. Take care of your shield so it can keep taking care of you!

Adding a shield is a great way to ramp up protection for your next box lacrosse match or summertime field tournament. Just be sure to care for it properly so it stays in top shape all season long. Keep some replacement parts on hand for any worn or damaged components. With the right gear, you’ll be covered and ready for that fast break to goal!

Rules About Facial Protection in Lacrosse

Adding extra protection like a face shield is always a good idea for lacrosse players. But make sure you know the official regulations around facial gear so you stay compliant on the field. Rules can vary by league and age level, so do your homework before strapping on a new shield.

Required Face Protection

For youth levels, a full face shield or cage integrated into the helmet is typically required. This provides critical protection for eyes, nose, teeth and jaw as young players develop skills and game situational awareness. Some leagues mandate shields through 8th grade and allow transition to standalone masks in later grades once checking is introduced.

In high school and higher competition, a basic lacrosse mask with chin and cheek guards is the minimum facial protection allowed. Anything more is optional for players to determine their own comfort level. Check your governing body’s latest rules to be sure of specific face protection requirements.

No Tinting Allowed

Be aware that most leagues prohibit any tinted or mirrored shields that obscure the eyes or face. Regulators want to ensure players can make direct eye contact and read each other’s visual cues on the field. This also allows refs and coaches to identify players at a glance. So stick with 100% clear, non-tinted shields and cages only.

Must Allow Ref Access

Any additional facial protection gear you add can’t prevent refs, coaches and medical staff from visually accessing your face as needed. Shields must have quick, easy release tabs that allow them to be flipped up for identity and injury checks. Make sure any extra gear still allows clear communication and observation during gameplay.

Check for Certification

Look for labeling that indicates your shield meets regulated safety standards like ASTM F803 for women’s lacrosse or NOCSAE ND200 for men’s lacrosse. These certify it provides adequate impact absorption and deflection within sport guidelines. Using only tested, certified gear adds an extra layer of protection from injury.

No Weaponizing Attachments

Be aware that some leagues prohibit any protruding or pointed attachments on helmets and facial gear that could harm other players. Face shields should have smooth, rounded edges and hardware. Don’t add anything that juts out and could cause injury on contact.

Must Allow Free Head Movement

Any shield you add can’t restrict your ability to freely pivot and turn your head on a swivel. Make sure it’s properly secured but allows full range of motion so you can track the ball and opponents without hindrance. Overly stiff, tight shields can dangerously limit mobility and reaction time.

Check League-Specific Regulations

Youth, high school, college and pro leagues all have slight variations on facial protection rules based on play level and contact type allowed. Know your specific league or governing body’s requirements before assuming any gear is regulation compliant. When in doubt, go with more protection until you confirm specifics.

Think Beyond Games

Don’t forget that your lacrosse helmet and shield also need TLC between seasons during storage. Make sure all gear is fully cleaned beforehand. Keep your stick bag or helmet box in a climate-controlled storage area, not the attic or damp garage.

Before the new season starts, inspect your shield closely for any cracks or cloudiness that may have developed during the off months. Fog a new shield with your breath and see if it stays cloudy – a failing anti-fog coating means it’s time for a fresh one. Take care of your shield so it can keep taking care of you!

Adding extra facial protection can be a smart move in a tough, physical sport like lacrosse. Just be sure you know the specific regulations for legal gear based on your age and league. With the right certified shield fully compliant to the rules, you can focus on your game rather than potential injuries from sticks and hard balls flying your way at high speeds!

Should You Use a Tinted or Clear Shield?

When upgrading your lacrosse helmet with a face shield, you’ll have to decide between tinted or clear protection. There are pros and cons to both options to consider carefully. Keep reading to learn which type of shield lens may be best for your position and style of play.

Benefits of Tinted Shields

Tinted face shields are popular with many players for cutting glare and enhancing contrast on bright days. Common tint colors include smoke, amber, yellow, rose, blue, and mirrored. Tint can improve visibility in direct sun and reduce eye strain.

Some brands also offer specialty tints to enhance the lacrosse ball’s visibility against certain backgrounds. This can provide an extra fractional advantage in tracking the ball off sticks, through the air, and on rebounds.

Just be aware that most leagues prohibit tinted shields because they obscure eye contact between players and officials. But they may be an option for recreational and practice play depending on your league rules.

Benefits of Clear Shields

Clear face shields provide an undistorted view of the field and don’t alter natural colors or light. This allows for the most accurate viewing and tracking of the ball in play. Clear protection is also required by most leagues for regulated games.

A clear lens makes it easier to make eye contact with teammates for situational awareness and communication. Refs can also easily see your eyes and facial expressions for interpreting signals, questions, and injury checks.

Consider Light Conditions

Think about when and where you primarily play when choosing tinted or clear. If you play a lot of night games under stadium lights, tint is less beneficial and clear would be the way to go. The same goes for indoor box lacrosse settings.

For sun-drenched spring afternoons on the field, a subtly tinted lens can help cut through glare. Just be prepared to switch it out for a transparent shield when it’s time for league play.

Test Options First

If possible, try out different tint and clear options first before buying to get a feel for visibility. Brands have different lens technologies and light transmission specs, so see what works best for your eyes before committing.

Bring a teammate and test tracking drills on passes, shots, and scoops using various shields. Note if any added colors distort your view or slow reaction time to the ball.

Know Your League Rules

Before opting for any tint, check your specific league, division, and age group regulations about facial gear. Most mandate clear shields for games and prohibit anything tinted or mirrored that obscures eye contact. Know the rules to avoid getting sidelined on a technicality.

You may be able to use tinted lenses for practices as long as they don’t inhibit communication. Just swap on tournament days for legal transparent protection.

Consider Removable Options

Some shield models allow you to snap on different removable tinted visors onto a base clear shield. This gives you the ability to tailor protection to each condition and stay compliant for organized games.

Quickly swap clear or colored visors depending on sun, venue, and league rules. Just be sure removable parts are securely attached before each use for safety.

Adding facial protection is smart for such a fast, high-impact sport. Know league regulations, light conditions, and your vision needs when deciding between tinted or clear shield lenses. With a comfortable, unobstructed view of the ball and opponents, you’ll be ready to charge the goal!

Anti-Fog Shield Coatings Explained

To prevent obscured vision on hot, humid game days, lacrosse shields rely on anti-fog coatings. These specialized treatments keep the lens clear by stopping moisture buildup when you sweat. There are a few different types of defogging formulas to understand.

How Anti-Fog Coatings Work

Untreated plastic will fog up when warmer, moister air contacts the cooler shield surface. This causes condensation obstructing your view. Anti-fog agents change the surface tension to prevent microscopic droplets from forming in those conditions.

The additives enhance water sheeting that spreads any moisture smoothly across the shield. This allows vision to stay crisp and clear even when you’re sweating buckets sprinting up the midfield.

Common Anti-Fogging Formulas

One classic anti-fogging agent is glycerin, an odorless, colorless liquid compound derived from plant oils. It hydrogen bonds with the shield to reduce surface tension and dissipate condensation.

Detergent-based treatments use surfactants to smooth moisture rather than allowing foggy droplets. Popular options are hydrophilic solutions to attract and sheet water outward.

Some brands also apply hydrophobic nano-coatings, which repel moisture altogether. These work by creating a grainy surface that water beads and rolls off of quickly.

Reapplying Anti-Fog Coatings

No anti-fog solution will last forever, especially with repeated use and cleaning. You’ll eventually notice your shield starting to get foggy as the coating wears off. Thankfully, most brands sell reapplication kits.

Start by gently sanding the inside of the shield with fine grit sandpaper to remove the old coating. Wipe clean and apply the defogging solution per the kit directions. Let dry fully before reinstalling the refreshed, fog-free shield.

Caring for Anti-Fog Coatings

To make anti-fog treatments last longer, be careful what you use to clean your shield. Harsh chemicals, soaps, and scrubbing can strip the coating prematurely.

Use only gentle, plastic-safe cleaners and soft microfiber cloths. Rinse thoroughly after applying any spray treatments. And avoid laying shields inside-up in direct sun when storing to minimize UV damage.

Spotting Failing Anti-Fog Coatings

Over time, you’ll notice your shield starting to mysteriously fog up more easily with sweat and humidity. That’s the sign the anti-fog coating needs recharged.

An easy test is to simply breathe on the lens and see if the moisture dissipates immediately. If your breath fog lingers, the coating is shot and due for renewal.

Upgrading Your Shield

If you notice fogging issues quickly after applying a new anti-fogging kit, the base plastic shield itself may be too worn. Degraded plastic can fail to bond well with coatings.

In that case, it may be time to simply replace the whole shield altogether. Upgrading to a new high-performance shield gives you a fresh base for anti-fog treatments to adhere securely.

Don’t take chances with fogged vision during fast-paced games. Reapply or upgrade shields at the first sign of trouble with condensation. Clear sight lines are critical for lacrosse ball tracking and situational awareness!

Adding facial protection is smart for such a fast, high-impact sport. Just don’t let obscured vision from fogging ruin your game. With the right anti-fog treated shield, you’ll play crisp and confident in any conditions.

Most Protective Materials for Shields

When adding facial protection to your lacrosse helmet, you want a shield constructed from optimal materials. The right materials absorb impact, resist cracking, and protect your eyes and face from harm. Here are the top options:

Polycarbonate

This ultra-strong, shatter-resistant plastic is used to manufacture bulletproof glass. Polycarbonate has extremely high impact resistance thanks to its molecular structure and flexibility.

Leading brands mold polycarbonate into vented shields contoured for perfect fit. It provides robust protection from checks, slashes, and high-speed shots to the mask and helmet.

Acrylic

Acrylic plastic has great optical clarity along with decent durability and impact absorption. It’s an affordable shield material that holds up well to routine game impacts and checks.

Look for cast or extruded acrylic, which is stronger than sheet forms. It resists shattering better thanks to the manufacturing process aligning interior molecular structure.

Polyethylene Terephthalate

Also known as PET plastic, this material combines lightweight durability, optical clarity, and economical cost. Thermoplastic PET is very resistant to impact fracture and penetration.

PET shield material accommodates vision-enhancing treatments well. It’s easy to tint PET vibrant colors or add scratch-resistant coatings as needed.

Alloy Composites

Some brands fuse different plastic materials into proprietary alloy composites. These unique blends aim to provide the best properties of each material in one shield.

For example, polycarbonate may be blended with acrylic for enhanced clarity and resistance. Or PET could be mixed with nylon for increased stiffness and durability.

Trivex

This urethane-based material provides superior optics, impact resistance, and lightweight strength. Trivex was originally developed for military visors and ballistic eye protection.

It outperforms traditional plastics in laboratory testing for preventing penetration and distortion. Trivex also withstands extreme temperatures well.

No shield lasts forever with extreme lacrosse impacts. But the right high-grade materials buy critical extra protection from facial injuries. Know your options when upgrading helmets with new shields.

Adding protection is smart in fast, physical lacrosse games. Ensure top quality vision and impact absorption by choosing a shield made from advanced durable materials. You’ll be able to focus on playing all-out without worrying about injuries!

Customizing Your Shield’s Look and Style

Beyond just protection, a lacrosse face shield is also a chance to express your personal style. With custom graphics, creative bling additions, and more, you can make your shield truly unique. Here are some ideas for customizing the look:

Custom Graphics and Decals

Many brands offer shields with customizable graphics and decals. Upload your own artwork or photos to add a unique personal touch. Display your number, nickname, team logo or mascot, catchphrase, or other designs that show your personality.

Use bold colors and patterns to stand out. Apply eye-catching metallic foils or holographic prints for added flash. Swapping graphics each season keeps your look fresh.

Tinted Visors

Tinted and mirrored polycarbonate visors are a popular way to change up style and stand out. Avoid colors that could obstruct vision like black or red. But shades like blue, gold, and silver add flair you can see through.

Look for removable visors to switch up the tint for different looks. Just ensure they securely snap in place and meet safety standards for gameplay.

Colored Hardware

Personalize the function with colored hardware. Available in a rainbow of hues, colored clips and screws add subtle personality. Or use neon or metallic hardware for bold accents contrasting the shield color.

Ensure colored parts are made from durable plastics or anodized metals that won’t chip or degrade with use. Avoid anything that could cut or scratch.

Bling Add-Ons

Sparkly domed stickers, glitter vinyls, and imitation gem accents are a fun way to bling out your shield. Look for lacrosse-focused designs like crosses, balls, and stick shapes. Or just add some extra shine with metallic foils.

Place embellishments strategically around vents and open areas to avoid any potential snagging. Ensure all add-ons are securely adhered so they won’t peel off during active play.

Cage Decals

If you use a cage/shield combo, customize the cage too! Full decal kits allow you to cover the cage with your number, nickname, designs, patterns and colors.WHITE 68 via

Or use small stickers and badges for cheaper, customizable flair. Just avoid blocking any cage openings and vent holes.

Express yourself but maintain safety and performance. A customized lacrosse shield turns mandatory protection into an outlet for personal style and team spirit!

Protection is a must in lacrosse, but express your unique flair too. Customize your shield with cool colors, graphics and accessories that showcase who you are. A personalized shield boosts confidence as well as safety!

When It’s Time to Replace an Old or Damaged Shield

A face shield is a vital piece of protective lacrosse gear that takes a beating. With frequent checks, slashes, and high-speed ball impacts, they gradually wear down over time. Here are signs it may be time to swap in a fresh new shield:

Fogging Issues Persist

If your shield constantly fogs up despite anti-fog spray treatments, the plastic lens itself is probably too scratched and worn. Degraded surfaces can’t properly bond with coatings. Chronic fogging obscures vision, so replace shields at the first signs of trouble.

Scratches and Scoring

Small surface scuffs are normal, but deep scores and scratches mean the structural integrity is compromised. If you can catch your fingernail on them, replacement is needed. Heavy scratching distorts vision and risks penetration on impacts.

Cracks Form

Inspect closely for any cracks radiating from vents, hardware holes, or previous impact points. Even hairline fractures weaken the plastic and risk spreading. Cracked shields provide less impact absorption and optical clarity too.

Remove immediately at the first sign of cracks and replace. Don’t risk taking another hit with compromised protection.

Warping or Cloudiness

Shields that become warped or develop clouded patches are too degraded to protect properly. The plastic is no longer adequately flexible or transparent after taking repeated hits. Upgrade to a new shield with undistorted optics.

Broken Clips and Mounts

Damaged shield clips or screws cause improper fit and positioning. Replace any broken mounting hardware immediately so your shield sits correctly for full protection. Don’t jury rig temporary fixes.

Stiffness and Brittleness

Shields lose flexibility and impact absorption as the plastic ages. Noticeable stiffness, rigidity, or brittleness means yours can no longer flex to deflect hits. An outdated brittle shield is prone to shattering too.

Age Alone

Consider proactively replacing shields about every 1-2 seasons of play. The lifespan depends on use frequency and intensity. But the plastic degrades over time even when stored properly.

Don’t wait until it’s obviously damaged. Stay ahead of issues with a fresh shield each year or two.

Don’t risk avoidable injuries from outdated, damaged shields. Inspect frequently and replace at the first signs of trouble. Your protection – and safety – depend on it!

A quality lacrosse shield safeguards your vision and face from harm. But make sure to swap in a new one once degradation occurs. Protect both your game and your face with equipment that’s up to the task!