How to choose the right flex for your shooting style. What blade curve best suits your playing position. Why proper stick length impacts overall performance. When to replace your stick for optimal results. How to care for your CCM JetSpeed Pro2 to extend its lifespan.

Selecting the Optimal Flex Rating for Your CCM JetSpeed Pro2

The flex rating of your hockey stick plays a crucial role in determining shot power and accuracy. For the CCM JetSpeed Pro2, finding the right flex is essential to maximize your performance on the ice.

To determine the ideal flex rating:

• Consider your body weight and strength
• Analyze your shooting style (slapshots vs. snap shots)
• Factor in any planned shaft cutting
• Test different flexes to find your sweet spot

A common rule of thumb is to choose a flex rating that’s approximately half your body weight. For instance, if you weigh 180 pounds, start with a 90 flex stick. However, this is just a starting point – your personal preference and playing style should ultimately guide your decision.

Impact of Stick Cutting on Flex

Cutting down your stick’s shaft can significantly alter its flex characteristics. Generally, removing 1 inch from the shaft increases the flex by 3-5 points. Keep this in mind when selecting your initial flex rating, especially if you plan to customize your stick length.

Testing Flex Options

To gauge if a particular flex suits your strength and shooting mechanics, try this simple test: Hold the stick horizontally and push down on the blade with your thumbs. The effort required to achieve a good bend can indicate whether the flex is appropriate for you.

Choosing the Ideal Blade Curve for Your Playing Style

The blade curve of your CCM JetSpeed Pro2 significantly impacts puck handling, passing, and shooting accuracy. Selecting the right curve can elevate your overall performance on the ice.

Curve Types and Their Benefits

• Open face curves (e.g., P28, P91A): Ideal for quick release and elevated shots
• Mid curves (e.g., P29): Versatile option suitable for various playing styles
• Heel curves (e.g., P88): Excellent for precise stickhandling and passing

Consider your position and primary role on the team when selecting a blade curve. Forwards who frequently take quick shots may prefer an open face curve, while defensemen might opt for a heel curve for better puck control and passing accuracy.

Optimizing Stick Length for Enhanced Performance

The length of your CCM JetSpeed Pro2 stick can significantly impact your on-ice performance. Finding the right balance between reach and control is crucial for maximizing your effectiveness in various game situations.

Guidelines for Determining Ideal Stick Length

1. Stand without skates: The stick should reach between your chin and nose
2. Wear skates: The stick’s top should be at or slightly below your chin
3. On-ice feel: Adjust based on your comfort level and playing style

Remember that these are general guidelines. Your optimal stick length may vary depending on your position, playing style, and personal preference. Experiment with different lengths to find what works best for you.

Mastering Shot Techniques with the CCM JetSpeed Pro2

The CCM JetSpeed Pro2’s mid-kick point design offers versatility in shot selection and execution. Understanding how to leverage this feature can significantly enhance your shooting capabilities.

Optimizing Slapshots

To maximize slapshot power with the JetSpeed Pro2:

• Position your lower hand slightly higher on the shaft
• Focus on a smooth, sweeping motion to load the stick
• Transfer your weight forward as you make contact with the puck
• Follow through completely to maximize power and accuracy

Perfecting Wrist Shots

For quick, accurate wrist shots:

• Keep your hands closer together on the shaft
• Use a shorter backswing to maintain shot deception
• Roll your wrists through the shot for added power
• Focus on a precise release point for improved accuracy

Maintaining Your CCM JetSpeed Pro2 for Longevity

Proper care and maintenance of your CCM JetSpeed Pro2 can significantly extend its lifespan and maintain optimal performance throughout its use.

Essential Maintenance Tips

1. Dry the stick thoroughly after each use to prevent moisture damage
2. Store in a cool, dry place away from direct sunlight
3. Regularly inspect for signs of wear or damage
4. Apply stick wax to the blade for improved puck feel and protection
5. Use stick tape judiciously to avoid excess weight and maintain flex characteristics

By following these maintenance practices, you can ensure that your CCM JetSpeed Pro2 remains in top condition, allowing you to perform at your best on the ice.

Enhancing Puck Control with the CCM JetSpeed Pro2

The CCM JetSpeed Pro2’s design offers excellent puck control capabilities. Mastering these techniques can give you a significant advantage during gameplay.

Stickhandling Drills for Improved Control

• Figure-eight drills: Enhance dexterity and quick hands
• One-handed stickhandling: Improve reach and control in tight spaces
• Toe drag practice: Perfect this move for beating defenders
• Quick hands drill: Rapidly move the puck side to side to improve reaction time

Incorporate these drills into your practice routine to maximize the benefits of your CCM JetSpeed Pro2’s puck control features.

Analyzing When to Replace Your CCM JetSpeed Pro2

Knowing when to replace your hockey stick is crucial for maintaining optimal performance on the ice. While the CCM JetSpeed Pro2 is built for durability, eventually, all sticks need replacement.

Signs It’s Time for a New Stick

• Visible cracks or splits in the shaft or blade
• Noticeable loss of shot power or accuracy
• Changes in flex or kick point feel
• Warping or delamination of the blade
• Significant wear on the bottom edge of the blade

If you notice any of these signs, it’s likely time to consider replacing your CCM JetSpeed Pro2. Remember, playing with a compromised stick can negatively impact your performance and potentially lead to injury.

Leveraging the CCM JetSpeed Pro2’s Technology for Game Improvement

The CCM JetSpeed Pro2 incorporates several advanced technologies designed to enhance player performance. Understanding and utilizing these features can significantly improve your game.

Key Technologies and Their Benefits

1. JF-90 Blade: Offers improved puck feel and shot accuracy
2. Sigmatex Carbon Fiber: Provides excellent strength-to-weight ratio for enhanced durability
3. X-Flow Technology: Removes excess resin for a lighter, more responsive stick
4. R-Geometry: Optimizes energy transfer for increased shot power

To fully leverage these technologies:

• Practice one-timers to take advantage of the stick’s quick release capabilities
• Work on your slapshots to maximize the benefits of the R-Geometry design
• Focus on precise stickhandling to utilize the improved puck feel of the JF-90 Blade

By understanding and actively utilizing these technologies, you can maximize the performance benefits of your CCM JetSpeed Pro2 stick.

Customizing Your CCM JetSpeed Pro2 for Personal Preference

While the CCM JetSpeed Pro2 comes with excellent out-of-the-box performance, customizing your stick can further enhance its effectiveness for your specific playing style.

Personalization Options

• Grip customization: Add or remove grip tape to suit your handling preference
• Blade pattern modifications: Slightly alter the curve or lie angle for better puck control
• Shaft modifications: Add extra layers of composite for increased durability in high-wear areas
• Weight adjustments: Strategically add small weights to balance the stick to your liking

Remember, any modifications should be done carefully to avoid compromising the stick’s structural integrity. When in doubt, consult with a professional or experienced player before making significant changes.

Fine-tuning Your Stick’s Performance

To optimize your CCM JetSpeed Pro2 for your specific needs:

1. Experiment with different tape jobs to find your ideal puck feel
2. Try various grip techniques to determine what feels most natural
3. Test different flex points by adjusting your hand positioning
4. Practice with the stick in various game-like scenarios to identify areas for customization

By taking the time to personalize and fine-tune your CCM JetSpeed Pro2, you can create a truly custom tool that enhances your on-ice performance and feels like a natural extension of your body.

Comparing the CCM JetSpeed Pro2 to Other Top-tier Hockey Sticks

Understanding how the CCM JetSpeed Pro2 stacks up against other high-end hockey sticks can help you appreciate its unique features and determine if it’s the best choice for your playing style.

CCM JetSpeed Pro2 vs. Bauer Nexus 3N Pro

• Flex profile: JetSpeed Pro2 offers a mid-kick point, while the Nexus 3N Pro has a traditional mid-low kick
• Weight: Both sticks are lightweight, with the JetSpeed Pro2 slightly edging out in this category
• Blade construction: JetSpeed Pro2’s JF-90 Blade provides excellent puck feel, comparable to Bauer’s eLASTech Technology

CCM JetSpeed Pro2 vs. Warrior Alpha DX

• Shaft technology: JetSpeed Pro2 uses Sigmatex Carbon Fiber, while Alpha DX features Warrior’s FuelCore blade
• Release speed: Both sticks offer quick release capabilities, with the JetSpeed Pro2 excelling in one-timer situations
• Durability: The JetSpeed Pro2’s construction generally offers slightly better longevity

While each stick has its strengths, the CCM JetSpeed Pro2 stands out for its versatility, offering excellent performance across various playing styles and positions.

Integrating the CCM JetSpeed Pro2 into Your Training Regimen

To fully harness the potential of your CCM JetSpeed Pro2, it’s essential to incorporate stick-specific drills into your regular training routine. This approach will help you become more familiar with the stick’s unique characteristics and improve your overall performance.

Off-Ice Training Exercises

1. Wrist strengthening exercises to enhance shot power
2. Balance and core workouts to improve stability during shooting
3. Plyometric exercises to increase explosive power for slapshots
4. Hand-eye coordination drills to enhance stickhandling abilities

On-Ice Drills

• Rapid fire shooting drills to master the stick’s quick release
• One-timer practice to leverage the mid-kick point design
• Stickhandling obstacle courses to improve puck control
• Pass reception drills to enhance feel and control

By consistently practicing these drills with your CCM JetSpeed Pro2, you’ll develop muscle memory and a deeper understanding of the stick’s capabilities, ultimately leading to improved on-ice performance.

Adapting Your Playing Style to Maximize CCM JetSpeed Pro2 Benefits

The CCM JetSpeed Pro2’s design features can significantly enhance certain aspects of your game. By adapting your playing style to leverage these characteristics, you can maximize the stick’s potential and improve your overall performance.

Shooting Techniques

To take full advantage of the JetSpeed Pro2’s mid-kick point:

• Focus on a smooth, full motion when taking slapshots to fully load the stick
• Practice quick snap shots to utilize the stick’s rapid energy transfer
• Experiment with different hand placements to find your optimal shooting stance

Puck Handling Adjustments

The JF-90 Blade offers excellent puck feel. To maximize this benefit:

• Work on soft touches and precise puck placement during stickhandling drills
• Practice receiving hard passes to improve your ability to corral the puck quickly
• Focus on quick, short movements when deking to take advantage of the blade’s responsiveness

By consciously adapting your playing style to the CCM JetSpeed Pro2’s strengths, you can unlock new levels of performance and potentially discover improvements in areas of your game you hadn’t previously considered.

Selecting the Right Flex for Your Shot Power

Choosing the right flex for your CCM JetSpeed Pro2 stick is crucial for maximizing your slapshot power and accuracy. The flex rating indicates how much the stick will bend when force is applied – a stiffer flex requires more strength to bend, while a more flexible stick will bend easier.

So how do you determine what flex rating is right for your playing style? Here are some tips:

First, consider your strength and shooting style. Do you take big winding slapshots? Or quick snap shots? Heavier and stronger players will need a stiffer stick to avoid getting too much flex when shooting. Lighter players can use more whip in their stick and go for a more flexible option.

A good guideline is to match the flex rating to half your body weight. So if you weigh 150 lbs, a 75 flex would be a good starting point. Go 10 flex points higher or lower depending on your preference.

It’s also important to factor in the cutting down of your stick’s shaft. Cutting off 2-3 inches can increase the stiffness by 5-10 flex points. Keep this in mind when choosing flex – you may want to start slightly more flexible if you plan to cut down the stick.

When testing potential flex ratings, a good way is to hold the stick out horizontally and push down on the blade with your thumbs. See how much effort it takes to get a good bend – this can help gauge if a particular flex will work for your strength and shooting mechanics.

Consider testing both slapshots and snap shots with different flex sticks. Pay attention to the feel, power, and accuracy. Does more flex give you better velocity and whip? Or does a stiffer stick provide more stability?

It’s also important to think about your stick’s kick point – the region where the stick flexes the most. The CCM JetSpeed Pro2 has a mid kick point, so the shot power will come from the middle of the shaft when you flex the stick. Make sure the flex aligns with your kick point.

While it’s tempting to go very stiff for maximum power, more flex can actually increase shot velocity. The whipping action lets you load up extra energy on the flex, releasing it as you shoot. Too stiff of a stick removes that slingshot effect.

Consider going down a flex rating or two from what you’re used to – you may be pleasantly surprised by the extra speed and power. But don’t go too low in flexibility to where the stick feels flimsy when shooting.

It’s always wise to road test different flex options if possible. Try out teammates’ sticks in varying stiffnesses, or bring a shooting device to the hockey shop to compare shot dynamics. Dialing in the right flex for your strength and mechanics can give your slapshots a noticeable boost in velocity.

Pay attention to blade patterns too – mid or toe curves allow loading the stick during shots, while heel curves focus power at the bottom hand. Combine flex ratings and curve types that sync together and suit your personal style.

Take time to consider if you want your CCM JetSpeed Pro2 to flex and whip, or to remain firm and stable during shots. Finding the right balance of bend will let you maximize the velocity and accuracy of both your snap shots and booming slapshots.

Don’t forget about one-timers as well – choosing a stick that lets you easily flex and unload on one-timers can really improve scoring opportunities off passes.

With experimentation and fine-tuning, you’ll dial in the perfect flex rating for your strength and preference. Pay close attention to subtleties in stick feel, puck control, and shot performance as you test varying stiffnesses.

Achieving your shot power potential requires fine-tuning the flex of your CCM JetSpeed Pro2. But once you find that sweet spot of whip and stability, you’ll be sniping top corners and blowing slapshots past goalies all season long.

Choosing the Proper Blade Curve for Your Style of Play

Selecting the right blade curve on your CCM JetSpeed Pro2 stick is a key factor in optimizing your overall performance. The curve impacts puck handling, passing, shooting accuracy and power. Finding the curve that fits your playing style best will elevate your game.

Here are some tips for choosing the ideal blade curve for you:

First, analyze what type of player you are. Are you a sniper who picks corners with wrist shots? A playmaker dishing crisp passes? An enforcer unloading booming slapshots? Your position and shot preferences should guide the curve selection.

For example, curves with more open faces and elongated hook shapes like the P28 or P91A are ideal for getting shots up quickly. The extra curvature creates whip on wrist and snap shots, adding velocity and improving accuracy.

If you play more of a finesse game and value puckhandling, consider a mid or heel curve like the P29 or P88. The shorter, tighter curve improves control for stickhandling and passing in tight spaces.

For pure power, nothing beats the big toe curves such as the P92. Maximum blade on the ice allows ripping big wind-up slapshots and one-timers. But accuracy and handling suffer compared to other options.

Analyze the types of shots you take most often. Do you drive the net with quick wristers? Prefer picks corners with snap shots? Load up for big slapshots from the point? Your preferred shot types should factor into the curve decision.

Also consider which hand you shoot with. Curves optimized for left or right-handed shots have slightly different shapes to account for shooting mechanics. Make sure to get a curve tailored for your dominant shooting hand.

Think about how you receive passes as well. Curves with more open faces like the P28 can really help corrall hard passes and absorb velocity. Closed heel curves provide less surface area for accepting passes.

When trying out potential curve options, pay close attention to how the puck feels coming off the blade. Does it roll smoothly and accurately? Or jump and flutter?

Shooting and passing on different ice surfaces can also impact results. Test curves at your local rink to simulate game conditions as much as possible.

Don’t just automatically mimic the curve your favorite NHL star uses either. While it’s tempting to use Crosby’s curve hoping for similar results, their stick preferences are tailored specifically for their elite skills and role on the team.

Instead, be honest about your own strengths and playing style when selecting a curve type. Consider taking shots along the boards or off the goalie pads – does the puck bounce favorably or unpredictably based on the curve?

When dialing in your curve, think about common in-game situations. How does the puck move on passes from bad angles? Can you effectively roof backhand shots? How about elevating a puck on your forehand from in tight?

Finding the right balance of puck control, passing ability, and shooting performance for your style of play is key. Don’t gravitate only towards open or closed faced curves.

Experiment with subtle variations in curve shapes and face lengths to cover all your on-ice needs. Mix it up with dual-curves or try extensions that shift the lower curve while retaining your preferred toe curve.

The details of lie, flex, and curve all combine to give your CCM JetSpeed Pro2 its unique shooting and handling traits. Finding the sweet spot that perfectly suits your game takes trial and error.

With experimentation and fine-tuning, you’ll find the ideal blade curve for maximizing your offensive strengths while minimizing any limitations in your game. Dial it in right, and your custom CCM JetSpeed Pro2 will feel like an extension of your hands out on the ice.

Taping the Blade Correctly for Improved Puck Control

Properly taping the blade of your CCM JetSpeed Pro2 stick is crucial for optimized puck handling and control. The right taping technique and materials can really enhance the feel and performance of your stick.

Here are some key tips for taping your blade for maximum performance:

First, choose a good hockey-specific cloth tape that provides decent grip without being too tacky. Tapes like Howies or Renfrew are ideal. Stay away from plastic or vinyl tapes that don’t absorb impact well.

Only use as much tape as needed – 1-2 layers is ideal for most players. Too much tape can deaden puck feel and make the blade unwieldy. Aim for a smooth, snug wrap.

When taping, start about 2-3 inches up from the bottom of the blade, leaving some bare spot so your stick makes solid contact with the ice. Overlap each wrap by around half the width of the tape for additional grip.

Angle the tape slightly on the diagonal rather than straight up and down the blade. This forces the puck to glance off the tape job rather than stick to it.

Wrap the heel and toe fully but don’t cover the entire face of the blade. Having some open space allows for cleaner puck reception and passing.

Keep the tape tight throughout the length of the blade without air bubbles or wrinkles. Use your fingers to compress the tape down firmly as you wrap.

For extra adhesion, you can lightly spray the blade with stick prep spray before wrapping the tape on. This helps it bond and prevents unraveling.

Make sure to wrap right over the heel to reinforce this high-wear area. The heel takes a lot of impact when stickhandling and shooting.

If you want extra protection on the bottom edges, add a strip of fiber tape on the heels and toes before doing the main tape job. This prevents chips and fraying.

Pay attention to your tape after icetime – freshen it up whenever the color fades or grip lessens. Don’t play with worn out tape that could unravel mid-game.

Consider double wrapping the bottom 3-4 inches of the blade for extra durability in high impact areas. The double thickness prevents tears.

Some players prefer to tape the tip of the toe fully for added puck control on intricate drags and rolls. But this reduces accuracy on shots.

Test different taping styles to find your ideal setup. For example, center-focused patterns provide maximum control while taped heels and toes add durability.

Don’t overlook the finishing touches either. Fold the end of the tape back over itself so it adheres firmly. Burnish down the whole tape job after wrapping for a smooth feel.

Trying putting a coat of stick wax over the finished taping – this fills in pores and reduces friction for slick puck handling.

Pay close attention to how your taped up blade performs in game situations. Does the puck sit flat on receptions for crisp passing and shooting? Or does it flutter and roll?

Fine tune the tape job thickness, friction and adhesion based on your stickhandling needs and preferences. The details make a difference.

As the tape loses its grip from use, consider rubbing it with an emery cloth to re-abrade the surface rather than completely rewrapping.

The key is finding a grip and friction level that suits your specific playing style. Test different approaches until the puck feels like an extension of your stick.

An ideal tape job on your CCM JetSpeed Pro2 blade provides just the right tackiness for stickhandling and shooting without compromising touch and feel.

Dialing in tape materials, grip patterns, and layers will remove any uncertainties or hesitations when maneuvering the puck. Your hands and blade will move seamlessly together with a perfectly dialed tape job.

Adjusting the Lie for Precise Passing and Shooting

Getting the lie angle right on your CCM JetSpeed Pro2 stick is essential for accuracy on shots, passes and puck handling. Proper lie ensures the blade sits flat on the ice and strokes straight through impact.

Here are some tips for optimizing your stick’s lie:

First, understand lie is the angle between the stick blade and shaft. On most sticks, lie ranges from 4 to 6 with lower numbers having more angle. Higher lies like 5 or 6 provide an upright blade orientation.

Choosing lie depends on your shooting stance and how you hold the stick. Think about how you grip the stick and where your lower hand sits when shooting.

If your hands sit low and you hunch over the stick, a more closed lie around 4 will keep the blade flatter when shooting. An open 6 lie would angle the toe down too much from this stance.

For an upright shooting posture with high hands, an open lie is needed. The extra angle rotates the toe up to square the blade properly. A closed lie would cause shots to ride up with this grip.

Also factor in puck position and how you pull through on shots. Heel-curve shooters need a more closed lie for optimal stabilization when sweeping through impact. Toe-curves like an open lie to press down during the shot.

When trying different lies, pay close attention to impact feel on passes and shots. Does the blade sit flush on the ice? Or does it dig and bounce?

Check your stick length too – longer shafts require more open lie while cut down sticks need a tighter lie. Adding an extension changes the lie angle as well.

Observe shot accuracy from different shooting angles. If shots tend to rise up or dive down, adjusting lie may help correct launch trajectory.

An imperfect lie reveals itself most on passes. Wobbly or airborne passes indicate the blade isn’t sitting correctly.

Have someone observe your shooting mechanics as you test different lies. An outside perspective on alignment helps determine the optimal angle.

If you notice uneven blade wear or erratic shot patterns, adjusting lie may help restore stability and consistency.

Don’t just blindly copy the lie of NHL stars either. Their specific style and hand placement differs from your natural mechanics.

Consider trying sticks with adjustable lie technology that let you add or reduce lie angle without needing a new stick. This allows easy customization as you dial it in.

If your current stick feels off but you’re unsure how to adjust lie, consult with a knowledgeable hockey equipment expert for guidance. Improper lie is hard to self-diagnose.

Keep an eye out for lie-related adjustments needed as your style evolves over time. Growth spurts or changes in stance may necessitate tweaks.

Take the time to fine tune lie angle specifics like toe rotate and heel angle too – slight tweaks make a performance difference.

Don’t neglect ongoing lie adjustments even after you’ve settled on a number. Adding a butt-end can alter lie angle and feel.

With experimentation and precision fitting, you’ll find the exact lie that maximizes your shooting technique and mechanics. Your dialed-in CCM JetSpeed Pro2 will fire pucks and passes on point every time.

Balancing the Stick for Effortless Stickhandling

Achieving optimal balance with your CCM JetSpeed Pro2 stick is vital for easy, effortless stickhandling. A well-balanced stick reduces fatigue and provides a seamless extension of your hands.

Here are some tips for perfecting the balance on your hockey stick:

Start by analyzing overall weight – sticks in the 400-500 gram range are ideal for most average players in terms of minimizing fatigue.

Heavier isn’t necessarily better – an overly heavy stick tires you out quicker and slows handspeed. But don’t go ultra-light and risk losing power.

Check weight specifications on sticks and cut down handles and add blade weights if needed to hit your ideal balance point.

Grip material matters – avoid heavier synthetic grips if concerned about overall heft. Supple leathers offer security without excess weight.

Pay attention to balance between the top and bottom hand when stickhandling. Equal weight distribution prevents one hand from overworking.

If the blade feels lighter, you can add extra layers of tape or fiber tape on the heels and toes to bring balance point up shaft.

Slide your bottom hand up and down when stickhandling to gauge where the natural pivot point is. Center it beneath your hands when possible.

Extending the shaft out on one-timers shifts balance rearward – factor this in. Choke up slightly to counteract.

Consider using lightweight composite shaft extensions to add length without making the stick end-heavy.

Don’t overlook blade pattern either – mid-curves like the P88 center overall balance nicely for handling.

While testing sticks, pay attention to how smoothly and effortlessly you can execute dekes, cuts and transitions.

If your wrists and hands fatigue quickly during stickhandling, improving balance will increase endurance.

Use weight scale tests to compare overall mass and weight distribution against other stick options.

Maneuver the stick slowly in your fingers – does it pivot smoothly or take extra effort to rotate?

Evaluate balance both static and in motion. Holding stationary only reveals so much – move the stick around to really test.

Avoid assuming more weight equals more power – well-balanced 400 gram sticks can offer just as much velocity as a heavy 500 gram stick.

Don’t make the mistake of chasing stick weights used by pros. Their strength and on-ice needs differ greatly from yours.

Consider balance when wearing gloves versus bare handed. The fit and feel of gloves alters perceptions slightly.

If overall balance feels right but something is still off, it may be top-hand versus bottom-hand imbalance that needs addressing.

Keep adjusting balance as you cut your stick down shorter. Removing shaft length changes the pivot point and feel.

Finding hockey stick nirvana takes experimentation – be willing to add or strip weight until the stick feels like an extension of your hands.

Gripping the Shaft for Maximum Shot Accuracy

Proper grip technique on your CCM JetSpeed Pro2 stick is crucial for optimizing shot power and accuracy. Your grip directly impacts energy transfer and aim.

Here are some tips on mastering your hockey stick grip:

First, ensure hands are positioned correctly – top hand halfway down the shaft, bottom hand just above the blade. Gripping too low or too high hampers accuracy.

Experiment with exact thumb placement. Generally thumbs on shaft center is ideal, but personal style matters.

Keep top hand loose to hinge the stick on shots. Bottom hand palms the middle of shaft for stability. Don’t choke up too high.

Allow wrists to snap naturally through shots. Tense, rigid grips reduce whip and accuracy.

Consider custom grip tape or tennis grips to optimize handle diameter size and tack.

Ensure bottom hand grip keeps the blade square through impact moment. Rolling the wrists distorts aim.

Let the stick do the work – pulling too forcefully with the bottom hand induces slices and misses.

On slapshots, slide the bottom hand down the shaft slightly for extra leverage and power.

Wraparound shots benefit from rolling top wrist slightly for optimal positioning through release.

If often missing high or wide, adjusting hand positioning may help dial in accuracy.

Pay attention to stick rotation and angling on shots. Clean blade contact boosts accuracy.

Consider trying trigger grips with index fingers pointed down the shaft for more stability.

Avoid ‘choking up’ too high on shaft – this reduces shot power and whip.

Focus on consistent hand placement in your natural grip zone for shot-to-shot consistency.

Heavier gloves impact feel and grip – ensure gloves suit your desired hand position and flex.

Tighter-fitting gloves promote better “feel” for gripping, passing and shooting.

Analyze tape on shaft to ensure grip section offers proper tack and cushioning.

Don’t overlook impact on grip from shaft texture and graphics – less glossy finishes can optimize grip.

Testing different glove palm materials reveals preferences – leather provides great stick connection.

Ensure top-to-bottom hand balance suits your personal style. You control accuracy.

Dialing in the right grip pressure takes experimentation – don’t force it. Let hands work naturally.

Consistent hand positioning shot to shot builds muscle memory for accuracy.

A perfectly dialed in grip synchronizes hands and stick into one fluid sniping weapon.

Understanding Kick Point for Improved Slap Shots

Optimizing the kick point on your CCM JetSpeed Pro2 stick is crucial for maximizing slap shot power and performance.

The kick point is the region of the stick shaft that flexes the most when shooting. An ideal kick point suits your personal shooting mechanics.

Here are some tips for optimizing kick point:

The JetSpeed Pro2 uses CCM’s proprietary SIGmatex composite layup to achieve a mid-low kick point for powerful shots.

Low kick point sticks flex from the bottom and are preferred for quick snap and wrist shots. The bottom hand loads more energy.

Mid kick sticks flex evenly across the middle of the shaft – ideal for versatility on all shot types.

High kick sticks flex near the top and are optimal for big wind-up slap shots. The top hand loads extra power.

Consider your primary shooting style and techniques – big winding up motion benefits from high kick, compact shots work well with low kick.

If your bottom hand does most of the work, low kick is ideal. More top hand involvement pairs well with high kick.

When testing kick points, pay attention to feeling the shaft load up then release as you shoot. Ensure flex aligns with your mechanics.

High kick sticks can feel whippy on quicker shots where you don’t fully load up the flex.

Low kick sticks limit full flex and power on big booming shots compared to high kick options.

A mid or mid-low kick provides niceversatility between power and release speed. But sticks tailored to your style can optimize performance.

Consider your grip and hand positioning as well – this impacts where you naturally flex the stick during shots.

Analyze video of your shot mechanics and watch stick bend in slow motion – does the kick point match where you flex most?

Pay attention to follow-through and balance after shots – optimal kick point provides smooth, controlled finish.

Have a partner observe your slap shots from bench level to analyze overall shaft flex in action.

If shots are proving weak and lacking power, adjusting kick point higher could provide more whip.

Cutting down the shaft too short reduces kick point effectiveness – leave enough length for ample flex.

Don’t neglect one-timers – choose a kick point providing power whether moving puck to blade or keeping stationary.

As shot mechanics evolve, re-evaluate kick point over time. Growth spurts may necessitate changes.

Dialling in the right kick point for your size, strength and shooting style is vital for slap shot domination.

Cutting Down the Shaft Length to Your Preference

Customizing the shaft length on your CCM JetSpeed Pro2 stick to suit your exact size and preference is crucial for optimized performance.

Here are some key factors to consider when cutting down shaft length:

Stick length affects everything from shooting power to puck handling – dialing it in properly enhances overall game.

Taller players generally benefit from longer shafts up to the chin or mouth area. Shorter players require proportionally shorter sticks.

Consider your skating stance and how low you bend. Hunching over requires longer shafts to accommodate.

Upright skaters can often go shorter for better control. Stick out in front rather than pulling in at sides.

When cutting, leave an extra 1-2 inches first, then fine tune from there. You can always cut more, but never add length back!

Keep minimum blade length in mind so heels and toes don’t bottom out. 5-6 inches of blade should remain.

Pay attention to balance point when cutting – removing shaft shifts balance forward and changes feel.

Consider shooting style – short sticks optimize wrist shots while longer shafts add slap shot power.

For poke checks and stick checks, shorter allows better control and quickness. But don’t sacrifice reach.

Adding extensions shifts balance rearwards – account for this if lengthening shaft.

When testing lengths, simulate game situations fully – shooting, stickhandling, passing. Don’t just hold statically.

Ensure adequate length remains for properly placing top and bottom hand. Gripping too low reduces control.

Check length while wearing skates – height on blades changes how shaft length feels.

Pay attention to endurance over long shifts – shorter sticks reduce fatigue on hands and arms.

Consider flexibility needs – longer shafts allow more whip for slap shots. Too short hampers flex.

Don’t cut based on what your favorite NHL star uses – their height and style differs from yours.

Anticipate growth spurts if young. Leave extra length to allow cutting again after growing.

Properly support shaft when cutting – use a vice and saw carefully to avoid splintering composite fibers.

Cut incrementally and test until finding your optimal balance of control, power, and comfort. Precise length optimization elevates your game.

Adding a Grip Extension for Extra Leverage

Adding a grip extension to your CCM JetSpeed Pro2 stick can provide some key benefits like extra leverage for power and customized sizing.

Here are some factors to consider when adding a grip extension:

Extensions add length without reducing flex like cutting the shaft – this retains whip for shots.

The extra leverage provides more torque and power on slap shots and faceoff moves.

Consider your current shaft length – extensions work best on sticks already at maximum traditional length.

Don’t over-lengthen the stick – loss of control and hand positioning can outweigh power gains.

Lightweight composite extensions add length without making the stick end-heavy.

For slap shots, slide bottom hand down the extension for extra whip and flex.

On quicker shots keep bottom hand in normal position – don’t need to choke down extension.

Adding length shifts the kick point higher up the shaft – factor this in.

An extension can allow using a stick with flex slightly too stiff if unable to exchange.

Ensure extension and shaft bond tightly together – check for twisting or play after installing.

Consider custom colored extensions to match team colors or blades.

Grip texture on extensions varies – try different grips for ideal tackiness.

For faceoffs, the extra reach and torque on extensions helps win draws.

Don’t go overboard on length – 4 inches maintains control while adding leverage.

Consider using extensions only on your strong hand side, or doubling up for maximum reach.

Ensure extension installation lines up precisely – misaligned rotations impact feel.

Some players use extensions only temporarily while adjusting to a longer stick length change.

Weigh the tradeoffs of power versus control when considering extension length.

Keep extension length consistent once set – shifting lengths alters muscle memory.

Properly support the shaft when installing extensions to avoid damage.

Dialing in the right grip extension provides a power boost without buying a whole new stick.

Replacing Worn or Damaged Blades When Needed

Knowing when to replace worn out or damaged blades on your CCM JetSpeed Pro2 stick is important for maintaining top performance.

Here are some signs it’s time to swap out an old blade:

Frayed heels/toes – this exposes raw composite fibers and affects puck control. Replace immediately.

Chunked/missing bottom edges – indicates the blade is wearing down too low. Impacts ice contact.

Deep scratches/gouges – these impact puck control. Fill with epoxy as temporary fix.

Faded/peeling graphics – purely aesthetic issues but can refresh look with new blade.

Warping along length – indicates internal structure failing. Causes erratic shots.

Cracked face – begins affecting accuracy. Inspect closely for hairline fractures.

High spot wearing unevenly – causes unbalanced blade and uneven ice contact.

Chipped or missing toe – impairs shooting power and accuracy.

Swollen front/back – signals internal separation. Begin proactively shopping for replacement.

Rotating new blades in exposes fresh edges and high spots as old blades wear.

Tapering performance over time – don’t wait for complete failure before replacing.

Erratic release and flight on shots – degraded blade causes flutter and knuckleballing.

Consider proactive replacement as visible wear appears. Don’t wait for failure mid-game.

Have sticks with different curve, flex, lie patterns ready for swap in.

Use epoxy as temporary fix on small chips but replace bigger chunks soon.

Ensure replacement blade matches existing curvature and lie specifications.

Weigh costs of new blades versus new sticks – blades prove more economical.

Upgrade to carbon fiber blades for maximum longevity and minimal water saturation.

Don’t attempt blade repairs besides touch-up epoxy – not worth time/cost.

Closely inspect blades pre-game for signs of damage that require swapping.

New blades restore the feel of a perfectly tuned high-performance stick.

Caring for the Graphics to Extend Aesthetic Appeal

Taking care of the graphics and finish on your CCM JetSpeed Pro2 stick helps maintain its visual appeal over time.

Here are some tips for making your stick look its best:

Gently clean shaft graphics as needed with a microfiber cloth to remove dirt and grime buildup.

Avoid abrasive cleaners or brushes that can scratch the graphics – use soft cloths only.

Rinse sticks after games to wash away salty, dirty ice residue before it dries.

Use stick wax treatments to fill in and protect graphic edges from chipping and peeling.

Spot treat any deep scuffs on graphics with paint pens that match your team colors.

Minimize stick tapping on the boards or ice to avoid chipping clear coat and graphics.

Keep sticks out of direct sun when not in use – UV exposure fades colors over time.

Consider clear stick tape just above the blade to protect the vulnerable lower graphics.

Avoid shaft surface damage by not jamming end into bench door gaps.

Grip gently when making adjustments to skates, gloves etc. – drops dent graphics.

Don’t overtighten shaft in benches or rack pegs – compression marks show.

Use padded stick bags for transport and storage rather than letting bang around unprotected.

Keep spare sticks wrapped and stored vertically to minimize pressure points.

Rotate sticks so the same areas don’t get repeatedly nicked up during games.

Touch up any major scuffs with matching automotive paint pens for near invisible fix.

Upgrade to textured or matte finishes if preferring less visible wear over time.

Consider clear stick sleeves to protect graphics and provide easy maintenance.

Hang or store sticks properly to avoid blade cuts into shaft graphics.

Avoid laying sticks graphics-down on rough or dirty surfaces.

Rotate use between multiple sticks to spread out normal wear and tear over time.

With some care, your JetSpeed Pro2’s graphics will maintain visual appeal season after season.

Storing Safely to Prevent Damage When Not In Use

Using proper storage methods for your CCM JetSpeed Pro2 stick is crucial to prevent damage when not playing.

Here are some tips for safe hockey stick storage:

Avoid leaving sticks sitting outside on cold, wet ground – moisture seeps into composite blades.

Never store sticks in hot cars or direct sunlight – heat warps shafts and fades graphics.

Hang sticks vertically using wall pegs, racks or stick bags to keep blade and shaft straight.

Position hooks/racks underneath heel and toe to avoid blade cuts into shaft from hanging weight.

Use stick tape or foam tubing on rack hooks to prevent finish damage from contact.

Ensure storage racks or hooks are properly installed for safety – don’t risk collapsed shelves.

Consider storing in closet or under bed to protect from accidental impacts and damage.

Avoid stepping on sticks when placing on ground or leaning against walls.

Keep away from high foot traffic areas like entryways where accidental bumps occur.

Store safely away from pets who may chew on blades or scratch graphics.

Transport in padded stick bags or well-supported in vehicles.

Never jam sticks blade-first into ground – chips blades and wedges dirt inside.

Lay sticks gently on benches rather than forcing into gaps and jamming.

Place on clean, smooth surfaces rather than outdoors on asphalt or gravel.

Keep sticks separated when possible to prevent scratching/denting from contact.

Loosen trucks on storage racks to easily slide shafts in and out without wedging.

Avoid tightening shafts too much in truck racks – compression dents shaft.

Wipe blades and shaft before storing to prevent corrosion from wetness.

Rotate use of multiple sticks to spread out wear rather than overusing one favorite.

Check sticks thoroughly for cracks or damage before returning to use after storage.

Proper storage keeps your JetSpeed Pro2 in peak condition for every ice time.

Utilizing Composite Technology for Power and Durability

The composite materials used in the CCM JetSpeed Pro2 stick provide major advantages in performance, power and durability versus wood sticks.

Here’s an overview of composite stick technology benefits:

Shafts made of woven graphite, aramid, fiberglass and carbon fiber are lightweight yet extremely tough and impact resistant.

Composite construction precisely tunes stiffness, flexibility and strength by layering directional fibers.

Varying composite weave directions creates controlled flex points and kick points for desired shot dynamics.

Compression-molded blades fuse layers of reinforcing fabrics into solid, highly durable structures.

Resins like epoxy or polyurethane bond matrix impregnate fibers for added structural rigidity.

Carbon fiber resists impacts better than fiberglass while providing superior lightweight strength.

Aramid fiber layers like Kevlar provide extreme durability against abrasions and cuts.

Optimized core densities absorb vibrations while retaining responsiveness and feel.

High-grade aerospace carbon fibers used in performance sticks are exceptionally rigid.

Nano-treated blades repel water for maintained performance and reduced weight gain.

Woven outer plies in multidirectional configurations contain interior fibers from damage.

Space-age resins like cyanate ester provide robust structural enhancement and bonding.

Precision molding creates consistent construction unlike hand-crafted wood sticks.

Advanced nano-ceramic coatings on fibers increase hardness and abrasion-resistance.

Improved manufacturing automation ensures strict quality control standards.

Multi-piece blade cores allow separately optimizing heel, mid, and toe zones.

Fusion-based construction prevents blades from separations like wood lamination failures.

Engineered composites allow tweaking sticks for personalized performance not possible with wood.

Hi-tech composites optimize the JetSpeed Pro2 for powerful, accurate shots minus wood’s drawbacks.

Comparing the Pro2 to Other CCM JetSpeed Models

The CCM JetSpeed Pro2 stick has some key performance and feature differences compared to other sticks in the CCM JetSpeed line.

Here is how the Pro2 stacks up against its JetSpeed siblings:

The Pro2 uses CCM’s new R-Series taper and rounded corners for improved feel and reduced weight.

It has a mid kick-point for versatility versus the FT5’s low kick and FT4’s high kick dynamics.

The Pro2 features CCM’s Sigmatex carbon/aramid fiber weave for great balance of power and durability.

It has a premium compression molded carbon core blade versus injected polymer on prior FT models.

The Pro2 blade incorporates CCM’s Pro Blade Stability for increased accuracy and control.

It uses lightweight TeXtreme carbon fiber in the blade versus heavier fiberglass/carbon plies on FT4/FT5.

The Pro2 has a true one-piece construction versus fused two-piece on previous JetSpeeds.

It features CCM’s new Minimus Carbon 1100 handle for improved balance and feel.

The Pro2 has a consistent flex profile unlike progressive flex on FT1/FT365 models.

It utilizes tunable foam core densities versus fixed medium or stiff cores on other JetSpeeds.

The Pro2 shaft has a smoother, consistent axis flex versus squared oval shaping on FT1.

It has pro-preferred flex points from 57 to 117 versus 55-100 range on JetSpeed FT5.

The Pro2 comes in individual flex options rather than pre-set 15-30 flex ranges.

It has CCM’s new Speed Pocket technology to boost blade flex and whip.

The Pro2 features a premium lightweight micro-feel shaft versus heavier traditional carbon fiber.

It comes in multiple custom pro-pattern options rather than limited retail curves on other models.

Overall, the JetSpeed Pro2 takes CCM’s stick line to a new level of performance and customization.

Deciding When It’s Time to Upgrade Your Hockey Stick

Knowing the right time to upgrade your CCM JetSpeed Pro2 stick is important to maintain top performance as technology improves.

Consider upgrading your stick if you notice:

Graphics are completely worn off and blade is showing raw fibers – you’ve maximized usage of stick.

Your skills have significantly improved requiring different flex, curve, lie than current stick.

You make contact on big slap shots but aren’t getting desired power – new kickpoint could help.

Pass reception feeling sloppy – a worn blade needs replacing to restore crisp passing.

Your age and strength have changed needing new flex and blade pattern.

Stick feels too heavy and slow for your evolving playing style and skills.

New stick materials like nano-ceramic coatings offer tantalizing performance gains.

You’ve shortened the stick over time and maxed out possible length adjustments.

Shaft technology has dramatically improved – take advantage of lighter precise construction.

Your stick doesn’t offer ability to tweak lie or flex settings for precision fitting.

A new curved blade would allow opening up different shot angle opportunities.

Stick technology specifically enhances parts of your game needing improvement.

Fatigue is forcing decreased performance during shifts – new construction fixes that.

A customizable pro stock stick offers refined options over retail models.

Your stick doesn’t sync well with new skates or gloves due to outdated tech.

You crave trying buzzworthy new tech features like texturing or tapered shafts.

Availability of new curves, flexes or lies offers potential game enhancement.

Just feel like a change – new stick smell and feel can up motivation and fun!

You notice other players utilizing tech helping their game that your stick lacks.

Research thoroughly to ensure your next stick matches evolving on-ice needs and style.