Picking the Right Sizing for Your Warrior Lacrosse Helmet
Choosing the perfect fitting Warrior lacrosse helmet is crucial for maximizing protection and comfort on the field. An ill-fitting helmet can slide around and expose your head to dangerous contact and checks. When determining your Warrior helmet size, the first step is accurately measuring your head’s circumference. Use a flexible measuring tape to wrap around the widest part of your head, just above the eyebrows and ears. Record this measurement in either inches or centimeters. Compare your head measurement to Warrior’s sizing charts to identify the best size range for your dimensions. Keep in mind that helmet sizes can vary slightly between brands and models. It’s always smart to try on different options within your range. When wearing potential helmets, aim for a snug, secure fit without pressure points. Shake your head vigorously to test for movement and stability. Ensure the helmet sits about 1 inch above the eyebrows with the front and back padding flush against your forehead and the back of your head. The plastic shell should completely cover your head without rubbing. Take note of any pinching which can lead to discomfort during play. Testing helmets with your lacrosse eyewear and mouthguard is also recommended. Move the chin straps and adjust the liner padding as needed until the helmet feels like a natural extension of your head. Prioritize comfort and protection when choosing the right Warrior lacrosse helmet size. An investment in the proper gear helps set you up for success on the field.
Understanding Sizing Charts for Warrior Lacrosse Helmets
When shopping for a new Warrior lacrosse helmet, one of the most important steps is consulting the brand’s sizing charts. Warrior provides detailed size graphs for all their lacrosse helmet models including the Alpha Pro, Alpha One, Burn Pro, Burn Standard, and more. These charts can serve as useful guides when determining the best fit for your head size and shape.
Warrior’s sizing charts present helmet sizes in increments of 1/4 to 1/2 inches. For example, the Alpha Pro runs from size Small (19 3/4 – 20 inches) up to size XX-Large (25 1/4 – 25 1/2 inches). The charts list the specific head circumference range in inches for each available size. This allows you to compare your own carefully measured head size to the recommended dimensions for each helmet.
Keep in mind that the best approach is measuring your exact head circumference with a flexible tape measure. Simply match your number to the size range that overlaps. Those at the top end of a size range may want to try the next size up for maximum comfort. It’s also important to note that sizing can vary slightly between models. While your head is 20 1/4 inches around, that may fall in the Medium for one Warrior helmet and the Large for another style.
Trying on different helmet sizes within your measurement range is recommended whenever possible. Consult store staff for guidance. Beyond the numbers, also pay attention to the overall fit and feel when the helmet is securely fastened. For the best protection, your Warrior lacrosse helmet should fit snugly around your head without any pressure points or gaps. Referencing Warrior’s sizing charts is a great starting point for narrowing down the ideal helmet size. But the final selection depends on comfort when actually wearing the helmet yourself.
Test Fitting Various Warrior Lacrosse Helmet Sizes
Getting the right fit is key when selecting a new Warrior lacrosse helmet. After measuring your head circumference and consulting sizing charts, the next critical step is actually test fitting helmets in different sizes. Don’t rely solely on size graphs or even your own measurements. It’s crucial to try on multiple helmet sizes in person for the best fit assessment.
When test fitting Warrior lacrosse helmets, focus first on finding a snug, secure fit all around your head. The helmet should sit tight enough to minimize shifting yet not cause any discomfort or pressure points. Shake your head vigorously while wearing the helmet – if it slides noticeably, that size runs too loose. Some movement is normal but you don’t want excessive play. Also check that your forehead and the back of your head press firmly against the interior padding. No gaps should exist between the shell and your head.
Pay special attention to potential rubbing or pinching which can lead to pain during play. Adjust the interior liner pads and removable foam pieces as needed to eliminate pressure points. Test the chin strap tightness as well – when properly fitted, you should be able to slide just one finger between the strap and your chin. Tighten or loosen accordingly. Trying on helmets with your eyewear and mouthguard gives the most accurate comfort assessment.
It’s smart to trial a range of sizes within your measurement parameters. Don’t assume the size at the top end of your range is right. Try that size along with 1 above and 1 below to compare the fit. Helmet sizes often overlap between brands so you may fall between two sizes. Take time to test each one for optimal security, stability and comfort when picking your next Warrior lacrosse helmet.
Achieving a Snug Warrior Lacrosse Helmet Fit
Finding a lacrosse helmet that fits just right is essential for maximizing protection on the field. When shopping for a new Warrior model, prioritize getting a snug, secure fit around your head. Don’t settle for a size that feels loose or sloppy. Take the time to try on different options until you achieve a truly stable, streamlined fit.
The ideal Warrior lacrosse helmet should fit flush against your head without pinching or creating pressure points. Shake your head vigorously while wearing potential sizes – minimal movement means a proper snug fit. For full stability, the helmet padding should also press gently against your forehead and the rear of your head. No gaps should exist between the plastic shell and your skull.
Adjust the removable interior padding to eliminate any tight spots. Having thick lacrosse socks on during testing can replicate a tighter game-day fit as well. Customizable foam pads allow you to tweak the snugness and comfort over time too.
Getting the stabilizing chin strap properly fitted is also key. When fastened correctly, you should just be able to slide one finger between the strap and your chin. Tighten or loosen the sliders until the desired snug hold is achieved. Don’t forget to try helmets on with your eyewear and mouthguard too for the most realistic test.
Settling for a loose helmet greatly reduces its ability to protect your head from checks and contact. Take time finding that ideal Warrior model that hugs your head securely without limiting vision, breathing or mobility. A properly snug helmet ultimately feels like an extension of you, allowing full focus on the game.
Checking for Pressure Points in Your Warrior Lacrosse Helmet
A top priority when fitting a new Warrior lacrosse helmet is ensuring it doesn’t create painful pressure points on your head. An ill-fitting helmet that digs into certain areas can quickly cause major discomfort out on the field. Take time when test fitting different Warrior models to pinpoint any problematic tight spots or pinching.
As you try on each size, slowly rotate your head from side to side and up and down. Pay close attention to any locations where the helmet shell, interior padding or straps make firm contact. Some light pressure against the front and back of your head is normal. But localized pinching indicates a poor fit.
Common pressure point areas include the temple region, upper sides of the head, base of the skull and along the jawline. If you feel noticeable pinching anywhere, that helmet is too small or needs adjustment. Try a larger size or utilize the removable foam pads to relieve tight areas until the fit feels uniform all around.
Having a teammate visually inspect from all angles can help identify problem spots too. Refrain from just “dealing with” discomfort – pressure points typically worsen over time. Don’t play through pain.
Finding a helmet free of pinch points ensures you stay protected and focused on the game, not distracted by equipment issues. Take as much time as needed with the sizing and padding until your Warrior lacrosse helmet contours snugly around your head without any pinching or pain. The optimal fit should feel seamless and natural all 4 quarters.
Evaluating Vision Clearance in Your Warrior Lacrosse Helmet
Ensuring adequate vision from your Warrior lacrosse helmet is a key aspect of finding the right fit. The helmet should allow you to see clearly up, down and peripherally without obstruction. Take time when sizing to assess vision clearance from all angles.
When trying on different Warrior models, make sure the brim sits just above your field of vision. About a 1-inch gap between the helmet rim and eyebrows is ideal – any lower can partially block upward view. Tilting the helmet back and forth shows if the brim stays clear of your sightlines.
Also check peripheral vision from side to side. Turn your head fully from shoulder to shoulder while wearing the helmet. You should have a clean line of sight without the cheek pads blocking. Look up and down as well – some helmets can limit these angles more than others.
Ensuring the facemask allows unobstructed forward vision is crucial too. Warrior uses various facemask styles – test options to find the best facial coverage without impeding eyesight. Narrower wire spacing can reduce vision versus wider gaps.
Taking time to properly evaluate vision clearance helps you identify the right Warrior lacrosse helmet fit. You need optimal viewing to spot teammates, defenders and the ball at all times. Don’t settle for a size or style compromising your field awareness. Stay protected but also visible with a helmet allowing complete, unhindered vision during play.
Testing Chin Strap Tightness on Your Warrior Lacrosse Helmet
Achieving proper chin strap tightness is an important part of fitting your new Warrior lacrosse helmet. The stabilizing chin straps keep the helmet securely on your head during activity. Testing and adjusting the strap tightness ensures optimal protection and comfort.
When sizing up a new Warrior helmet, begin by fastening the chin straps as you normally would for games. With the helmet on, open your mouth wide and make exaggerated chewing motions. If the helmet shifts or slips, tighten the straps via the slider adjusters. Continue biting and readjusting until the helmet stays put with your mouth open.
Next, try inserting just one finger between the strap and your chin. The fit should feel snug without limiting your ability to talk or catch your breath. If you can fit more than one finger, tighten the strap further. If no space exists at all, loosen it slightly. Finding that sweet spot takes trial and error.
Shake your head forcefully from side to side to verify the chin strap keeps the helmet stable during rigorous activity. Don’t forget to also test vision clearance and comfort once you’ve dialed in the ideal tightness.
Getting the perfect chin strap balance ensures your Warrior lacrosse helmet stays securely in place for maximum protection. Take time to test talk, chew and shake until the tightness feels just right.
Shake Testing Your Warrior Lacrosse Helmet for Stability
A helpful technique when fitting a new Warrior lacrosse helmet is the “shake test.” Vigorously shaking your head while wearing the helmet assesses the overall stability and fit. If the helmet shifts excessively during this motion, it’s likely too large and unsafe for gameplay.
After securing the Warrior helmet on your head, begin shaking back and forth gradually, then faster. Rotate between moving side-to-side, up-and-down, and circular motions. Keep your chin strap firmly buckled. Have a friend observe the helmet movement as you shake.
Some minor helmet shifting is normal. But excessive front-to-back, side-to-side, or rotational play indicates a loose fit. Any impact on the field could easily dislodge a helmet with that much room to slide. Repeating the shake test protocol with different sizing helps compare stability.
If a helmet model stays snug with minimal play, you’ve likely found the optimal size. Keep in mind other factors like potential pressure points too. Ultimately the most protective lacrosse helmet should pass the shake test with flying colors by staying firmly planted despite rigorous movement.
Taking time to shake test different Warrior lacrosse helmets removes guesswork from the sizing process. Prioritizing a helmet that fits tightly enough to remain secure during forceful impact helps minimize concussion risk. Don’t settle for a loose lid – insist on safety with a helmet that sticks!
Properly Positioning Your Warrior Lacrosse Helmet
Ensuring your new Warrior lacrosse helmet sits at the optimal position on your head is an important fit consideration. In general, the helmet should sit low enough to protect the forehead and temples without obstructing upward vision.
A good guideline when sizing Warrior lacrosse helmets is ensuring the brim rests about one inch above the eyebrows. This allows you to see clearly on the field while still utilizing the helmet for frontal coverage. Having the brim positioned any lower can partially block your view, while placing it too high reduces protection.
The back of the helmet should fully cover the lower rear portion of your head. When worn properly, you should feel gentle pressure from the rear interior pads. Tilting your head forward and back while wearing the helmet helps verify the back stays stable and grounded on your skull.
Testing different Warrior helmet sizes can help dial in the ideal positioning. The various shapes and interior padding configurations allow you to fine tune the front and rear placements as needed. Don’t settle for a helmet clearly sitting too high or low on your head.
Taking time to correctly position your new Warrior lacrosse helmet improves protection while allowing you to play to your full athletic potential. A balanced fit centered firmly on your head lets you charge the field with confidence.
Picking Breathable Lacrosse Helmet Materials
When selecting a new Warrior lacrosse helmet, consider the breathability of the materials used in its construction. The helmet shell, interior padding and vent holes all impact airflow and temperature control. Choosing options with moisture-wicking and heat-releasing properties helps keep you cooler and more focused.
Many Warrior lacrosse helmets utilize thermo-plastic polyurethane (TPU) for the outer shell. TPU offers strength and durability while allowing decent air permeability. It helps dissipate body heat better than solid polycarbonate plastic. However, full-carbon helmets like the Burn Pro provide even greater ventilation.
For interior padding, look for lightweight, open-cell foams and anti-microbial liners. These allow airflow while absorbing sweat. Removable pads with mesh covering or strategic cutouts are ideal. The more humid and hot your climate, the more breathability matters.
Vent holes along the shell also channel fresh air through the helmet interior. Models like the Alpha Pro have multiple vents across the crown for maximum airflow. Just ensure the holes don’t compromise protection.
Doing drills in your potential helmet on hot days tests real-world breathability. Prioritize the most air-permeable Warrior materials for cooler, drier play no matter the temperature or humidity.
Comparing Lacrosse Helmet Weights
When selecting your next Warrior lacrosse helmet, considering the weight of different models can help identify the best fit. Generally, lighter helmets provide greater comfort and less neck fatigue over the course of a game or practice. However, reduced mass may mean less padding or protection too.
High-end Warrior lacrosse helmets like the Alpha Pro leverage ultra-light materials to minimize bulk on your head. For example, the carbon composite shell on the Alpha Pro weighs only 2.3 pounds. Compare that to 3.0+ pounds for many standard plastic models. Less torque on your neck muscles reduces soreness over time.
The interior padding also impacts overall weight. Multi-layer foam and robust suspension liners add cushioning but increase ounces. Removable pads allow you to modify and reduce weight if desired. Higher cost helmets typically utilize lighter padding materials to cut bulk.
Vent holes and open-cell mesh covering further reduce mass while aiding breathability. But more vents mean potential weak points in the shell, so balance protection and temperature control.
Trying on different helmet weights gives a real sense of the difference a few ounces can make over 48 minutes of play. While absolute lightness isn’t essential, selecting a properly fitted and stabilized helmet on the lighter end of the scale helps minimize fatigue when facing off.
Customizing Your Warrior Lacrosse Helmet Liner
One key benefit of Warrior lacrosse helmets is the removable, customizable liner padding. Being able to modify the fit and comfort over time is crucial for maximizing protection. Carefully tailoring the liner configuration to your head shape and needs helps reduce pressure points while stabilizing the helmet.
Many Warrior models like the Alpha Pro come equipped with multiple liner pad thicknesses ranging from 5mm to 15mm. Mixing and matching these allows micro-adjustments for the perfect contour fit. Place thicker pads in any tight areas or gaps to achieve an even compression fit all around your head.
Warrior also offers replacement Fit Pads with mesh covering or strategic cutouts for increased breathability and airflow. Choose antimicrobial and moisture-wicking materials if sweat and odor are concerns.
Don’t just use the default pad setup – take time to experiment with arrangements and pad types/thicknesses that work for your needs. Having pads slide into grooved channels makes reconfiguring the liner quick and tool-free.
Periodically reassess the pad placement as your head shape changes over a season. Being able to customize your Warrior liner truly optimizes the helmet fit over time. Dial in comfort and security with the personalized pad configurations best matching your head.
Choosing Your Warrior Lacrosse Helmet Cage
An important component when selecting a Warrior lacrosse helmet is deciding on the right facial cage style for your needs. Warrior offers cages with varying dimensions, vision clearance and protective scope. Considering your position and playing style helps narrow down the optimal cage choice.
For max vision and ventilation, the Alpha Pro R helmet comes equipped with a titanium cage featuring widened spacing between bars. This enhances sightlines for carrying the ball upfield but provides less direct face protection.
Alternatively, close-contact defensive players might prefer a classic style steel cage with narrower bar gaps like on the Burn helmets. This allows less open space for checks and sticks to penetrate to your face.
Warrior’s SE-1 pro steel cage offers a hybrid approach with an expanded lower viewing area. Visibility for ground balls or shots remains balanced with solid high-impact protection.
Try different cage options if possible to view passing lanes, teammates, and ball movement. Ensure the cage itself doesn’t impair vision – especially peripherally. Keep safety the priority, but select a cage allowing you to play to your fullest potential.
Picking Your Warrior Lacrosse Helmet Style
Beyond fit and function, selecting a lacrosse helmet with a style that suits your preferences can boost confidence on the field. Warrior offers their helmets like the Alpha and Burn models in a wide range of colors, graphics and customization options. Take time picking your look.
The right helmet color choice comes down to visibility needs and personal taste. Bold primary tones like Warrior’s Matte Black or Gloss Cherry stand out against the grass. More subdued neutral hues blend in discreetly. Match your team colors or complement the rest of your gear.
Warrior lacrosse helmets also feature wrapped graphic prints ranging from patriotic flag designs to artistic galaxy visuals. Choose eye-catching patterns based on your style sensibilities. Many graphics come in alternate color schemes too.
For full personalization, Warrior allows you to create a custom helmet with your number embroidered on the rear bumper. Adding your name bar against the visor further makes the helmet your own.
While fit and safety remain most vital, expressing your flair on the field can provide an extra dose of confidence. Find that perfect Warrior lacrosse helmet in a colorway and design that closely aligns with your identity as an athlete.