Number sizes for shirts. Ultimate Guide to Shirt Sizing: Find Your Perfect Fit

How do you measure for the right shirt size. What are the different shirt fit types available. How do international shirt sizes compare. What factors should you consider when choosing a shirt size.

Understanding Shirt Measurements: The Key to a Perfect Fit

Finding the right shirt size is crucial for both comfort and style. The process involves taking accurate measurements of key body areas. Let’s explore the essential measurements you need to know:

Neck Measurement

The neck measurement is fundamental for dress shirts. To obtain this:

• Wrap a measuring tape around the base of your neck
• Allow for a comfortable fit by inserting one finger between the tape and your neck
• Round up to the nearest half-inch for the most accurate size

Sleeve Length

Proper sleeve length ensures a polished look. Here’s how to measure it:

• Start at the middle of the back of your neck
• Run the tape measure across your shoulder and down your slightly bent arm
• End at the wrist bone
• Add 1 inch to this measurement, rounding to the nearest even number

Waist Measurement

Some manufacturers, especially for athletic cut shirts, include waist size. To measure your waist:

• Wrap the tape measure around your waist where you typically wear your pants
• Keep one finger between the tape and your body for comfort

Decoding Shirt Sizes: From Small to 2X-Large

Shirt sizes can vary from brand to brand, but here’s a general guide to help you understand the range:

The Art of Shirt Fit: Finding Your Perfect Style

Shirt fit is as important as size when it comes to looking your best. There are three primary fits to consider:

Athletic Cut

This fit offers a more tapered silhouette, ideal for those with a V-shaped torso. It’s snug through the chest and waist, creating a sleek, modern look.

Regular Cut

The regular cut provides a looser fit compared to the athletic cut. It’s the standard fit for most dress shirts and suits a wide range of body types.

Full Cut

For those who prefer ample room, the full cut offers a much looser fit throughout the body of the shirt. It’s perfect for comfort-seekers and those with a larger build.

Women’s Shirt Sizing: Navigating the Numbers and Letters

Women’s shirt sizing can be complex, often involving both numerical and letter-based systems. Here’s a comprehensive guide to help you navigate these waters:

International Shirt Sizing: A Global Perspective

When shopping for shirts internationally, it’s crucial to understand how sizes translate across different countries. Here’s a quick reference guide:

Remember, these are approximate conversions. Sizes may vary by manufacturer and personal preference.

The Impact of Fabric on Shirt Fit and Comfort

While size and fit are crucial, the fabric of your shirt plays a significant role in both comfort and appearance. Here are some factors to consider:

Wrinkle-Free and Non-Iron Fabrics

These innovative fabrics have become a staple in modern wardrobes. They offer several advantages:

• Maintain a crisp, professional look throughout the day
• Reduce the need for ironing, saving time and effort
• Often more resistant to stains and spills

Fabric Weight and Breathability

The weight and breathability of the fabric can significantly impact comfort:

• Lightweight fabrics like cotton poplin are excellent for warm weather
• Heavier fabrics such as Oxford cloth provide warmth in cooler conditions
• Breathable fabrics like linen or cotton-blend performance fabrics help regulate body temperature

Stretch Fabrics

Shirts with a bit of stretch can enhance comfort and fit:

• Allow for greater range of motion
• Can accommodate slight fluctuations in body size
• Often retain their shape better throughout the day

Tailoring Tips: Perfecting Your Shirt Fit

Even with careful sizing, sometimes a shirt may need adjustments for the perfect fit. Here are some tailoring tips to consider:

Sleeve Length

Ideal sleeve length should allow about ¼ to ½ inch of shirt cuff to show when wearing a jacket. If your sleeves are too long:

• A tailor can shorten them from the cuff end
• For significant shortening, sleeves may need to be altered from the shoulder

Shirt Body

If your shirt is too loose in the body:

• Darts can be added to the back for a more fitted look
• Side seams can be taken in for a slimmer silhouette

Collar Size

While collar size is harder to alter, small adjustments are possible:

• A tailor can slightly adjust the collar button position
• For significant changes, replacing the entire collar may be necessary

The Role of Body Shape in Shirt Selection

Understanding your body shape can help you choose the most flattering shirt styles:

V-Shaped Torso

If you have broad shoulders and a narrower waist:

• Athletic or slim-fit shirts often work well
• Avoid overly loose fits that can create a boxy appearance

Straight Body Type

For those with similar measurements at shoulders, chest, and waist:

• Regular fit shirts typically provide a balanced look
• Vertical stripes can create the illusion of a more defined waist

Larger Build

If you carry more weight around the middle:

• Full cut or comfort fit shirts offer more room
• Avoid tight-fitting shirts that can accentuate problem areas

Remember, these are general guidelines. Personal comfort and confidence should always be the priority when selecting a shirt.

The Psychology of Fit: How the Right Shirt Can Boost Confidence

The impact of a well-fitting shirt goes beyond mere appearance. It can significantly affect your mindset and performance. Here’s how:

Professional Impact

In a professional setting, a properly fitting shirt can:

• Project competence and attention to detail
• Enhance your presence in meetings and presentations
• Contribute to a more polished overall appearance

Personal Confidence

On a personal level, the right fit can:

• Boost self-esteem and body image
• Reduce self-consciousness and increase focus on tasks at hand
• Encourage better posture and body language

Comfort and Performance

A well-fitting shirt can also enhance your physical comfort, leading to:

• Improved concentration and productivity
• Greater ease of movement throughout the day
• Reduced distraction from ill-fitting clothing

Investing time in finding the right fit is not just about looking good—it’s about feeling good and performing at your best.

Sustainable Sizing: The Future of Shirt Fit

As the fashion industry evolves, so does the approach to shirt sizing. Here are some emerging trends:

3D Body Scanning

Advanced technology is revolutionizing how we determine shirt sizes:

• 3D body scanners can provide precise measurements in seconds
• This technology allows for more accurate sizing recommendations
• Some retailers are incorporating this into their online shopping experience

Custom-Made Shirts

The rise of made-to-measure shirts is changing the sizing landscape:

• Online platforms offer custom shirts based on individual measurements
• This approach reduces waste from ill-fitting garments
• It allows for personalization in style as well as fit

Inclusive Sizing

The fashion industry is moving towards more inclusive sizing practices:

• Extended size ranges are becoming more common
• Gender-neutral sizing options are increasing
• Brands are using diverse models to showcase how shirts fit on different body types

These advancements in sizing technology and practices are making it easier than ever to find the perfect fitting shirt, regardless of your body type or personal style preferences.

SYMS Dress To Achieve.com

2. Next, measure for sleeve length. It
is important that your arm is at your side and slightly bent at the elbow.
Here is where it is best to have help. Start by placing one end of the
tape measure at the middle of the back of your neck; go across the shoulder,
and down your arm. You want to follow the curve of the shoulder and the
arm, end at the wrist bone. Add 1 inch (rounded to the nearest even number)
to this measurement to use as your sleeve length.

3.
Finally, some manufacturers also list a waist size on their packaging
(most often with athletic cut shirts). To determine the size of your waist,
measure around your waist over a shirt at the area where you would normally
wear your pants. Keep one finger between you and the tape measure. This
is your waist size.

The three most common fits for dress shirts
are

Athletic Cut
– a more tapered fitting shirt
Regular Cut – a looser fitting shirt then the Athletic
Cut. If the packaging is not marked it is assumed that the shirt is a
regular cut.
Full Cut – A much looser fitting shirt for the man who
likes a lot of room in the body of the shirt

Most stores will have someone available to
help you determine your size. Don’t feel you have to do this on your own.

Womens Sizing Charts
– Ably Apparel

Bust

Measure under your arms around the fullest part of your chest.

Waist

Measure around your natural waistline, keeping the tape a bit loose.

Hips

Measure around the fullest part of your body at the top of your leg.

Inseams

See the product page for inseam length.

All conversions are approximate. Fits may vary by style or personal preference. Sizes may vary by manufacturer.

Sizes

THIS is how you find your perfect fit

Even though a dress shirt is often hidden below the suit jacket, it is an essential part of your overall look. And latest when you take off your blazer, the dress shirt defines your appearance. How the fabric lays can make a great difference – wrinkle-free and non-iron fabrics are nowadays a mandatory investment. In addition dress shirts today come in a range of different fits to cater for varying body shapes – from slim fit to classic cuts – once you found your fit, you will look great in your dress shirt. Below you can find a lot of useful tips to find your perfectly fitting dress shirt. 

At a Glance

• There are two different types of sizing scales for dress shirts: (1) numerical sizing, which is based on neck and arm length, and (2) alpha sizing (XS, S, M, L, XL).
• To correctly determine your dress shirt size, you need to take measurements of the following: (1) neck, (2) sleeve length, (3) chest, and (4) waist.
• The most common dress shirt cuts are: (1) traditional or classic fit (loose fit throughout the torso), (2) modern fit (a slightly slimmer fit than a classic fit), (3) slim fit (cut is close to the body with a tapered waist and fitted torso), (4) extra or super slim fit (ideal for slender men as they are trimmer and sleeker than slim fits).
• Dress shirts come with different collar types, including: (1) English spread collar (standard spread and size), (2) button-down collar (both sizes are fixed to the chest with buttons), (3) forward point collar (narrow spread), (4) Londoner collar (very wide spread).
• There are also different types of cuffs: (1) barrel cuffs (cylindrical shape with one or two buttons), (2) mitered cuffs ( corner of each side of the shirt cuff is cut at a 45-degree angle above the button closure), and (3) french cuffs (completely square or rounded cuff shape and requires cufflinks).

For dress shirts you can typically find two different types of sizing scales:

• Numerical sizing (based on neck and arm length): hereby the chest and waist measurements are derived from the neck and arm length. The sleeve mostly defines the length of the dress shirt. Depending on the cut (i.e. slim fit) the dress shirt has a looser or tighter fit at the chest and waist. The first number of the numerical sizing on the size tag refers to the neck width, the second number to the length of the sleeve. If the label shows for example“14 30”, then this means a neck width of 14 inches and a sleeve length of 30 inches.
• Alpha sizing (XS, S, M, L, XL): while these dress shirt sizes are commonly used, they have the disadvantage of being quite arbitrary. Neck and sleeve length are very different between different brands and hence no clear guidelines are available. In addition, the sleeve length is normally less important than the chest width in this sizing scale.

Dress shirt size chart for men

How do I know my dress shirt size?

• Neck: The neck is the most important body part if it comes to finding the right size for your dress shirt.Either wrap the measuring tape around your throat while keeping a finger between the measuring tape and your neck or better: take a shirt that fits you well in the collar and measure from the center of the collar button to the end of buttonhole.
• Sleeve: Measure from the center back of your neck, over your shoulder, down on the outside of your arm to your wrist. It’s best if you bend your arm slightly while measuring.
• Chest:  Measure around fullest part of your chest. Hold the measuring tape just under your arms and then extend around your shoulder blades. Please, hold the measuring tape level and parallel to ground.
• Waist: Measure just below your waist at the height where you normally wear your pants (approx. 1 inch below your belly button). Ideally, keep one finger between the measuring tape and your body.

What dress shirt cuts are most common?

• Traditional or classic fit: this cut’s straight lines through the body is ideal for men with a wider chest and/or waistband. This fit is known to be cut more generously across the shoulders, chest, and waist. It has a loose fit throughout the torso. The classic fit tends to billow a bit when tucked in. Sometimes the classic fit also comes with longer shirttail to avoid the shirt is hanging outside the suit pants after sitting down.
• Modern fit: If a dress shirt billows too much when you tuck it in, you need a slimmer fit. In this case, you might choose a modern fit shirt or even a slim fit. The modern fit falls between the classic and the slim fit.
• Slim fit:  These dress shirts are cut close to the body with a tapered waist and fitted torso. They cut a clean line that contours to a man’s V-Shaped build.
• Extra or Super Slim fit: As the name already indicates, these cuts are even trimmer and sleeker than the slim fits. They are ideal for more slender men.

What collar should I wear?

• English spread collar: It is probably the most popular and well-known business collar. It comes with a standard spread and size. The English spread collar can be worn with or without a tie. Please make sure to unbutton the first button, when wearing it without a tie. The spread can accommodate larger and smaller tie-knots.
• Button-down collar: It is characterized by a special kind of shirt collar. Namely by such a one, which is not reinforced, for example by so-called “collar sticks”. In order to avoid uncontrolled protruding or collapsing, both sides are fixed to the chest with buttons. In Europe, it is considered a faux-pas to wear button down collar with a tie. In the US or Asia, this is not an issue.
• Forward Point: Is the most traditional collar type. It has a pretty narrow spread. The Forward point collar has a much smaller distance between the points than other collar styles while the length of the points remains the same. It is best suited for round face shape.
• Londoner collar: A collar with a very widespread. It looks especially good with larger tie-knots. If you want a more modern look, the Londoner collar is a perfect choice. It is best suited for oval/angled face shape.

What are the right shirt cuffs?

• Barrel cuffs: Are today the most commonly used cuffs. The sides of the cuff overlap and are fastened with a button. This creates a cylindrical shape, which apparently reminded some people of barrels. They are appropriate most cases, but shouldn’t be worn at white or black tie events. Barrel cuffs come mostly with one or two buttons on the cuff and one additional button further up at approx. the middle of the forearm.
• Mitered cuffs: A sub-type of barrel cuffs where the corner of each side of the shirt cuff is cut at a 45-degree angle above the button closure. The mitered cuff can be seen as a dressier form of the barrel cuff.
• French cuffs: French Cuff has either a completely square or rounded cuff shape and requires cufflinks to be worn. It is most commonly used with tuxedos but can also be worn with business suits.

How to clean my tailor-made dress shirt?

Even if tailor-made clothing is usually more durable than off-the-shelf clothing, proper care can increase the life expectancy of a tailored shirt. So you should pay attention to a few things when washing and ironing your shirts, then you will enjoy your shirt for a long time.

Of course, you can choose the convenient way of dry-cleaning, but the individual care of the shirts also has its advantages: it is gentler, particularly stubborn stains can be removed in a targeted way and you are independent of the cleaning opening hours.

Very important: Sorting correctly and following the care instructions

Before you start washing, you should sort the laundry by color: wash light with light and dark with dark. So that shirts do not get creased out of the drum after washing and are easier to iron later, it is advisable to only wash shirts together with shirts. Also, the machine should not be too full: Up to seven shirts are a good load of washing machines.

To be on the safe side before washing, take a look at the label of the garments you want to wash, because some materials are not suitable for a normal washing cycle, such as silk, or should not be washed in the machine at all. Suits, for example, are best kept in the dry-cleaning room.

Tips and tricks for washing your dress shirt

Before you put the shirts into the drum, you should fold up your collars and close the top button. In this way, dirt on the collar is better removed and the collar remains in shape. Also take a look at the cuffs, because if they are very dirty you can pre-treat them like the collar, with some liquid detergent or gall soap. If your shirt has collar sticks, as is the case with a shirt with Kent collar, these must be removed before washing. Otherwise, they may get lost, damage other pieces in the machine or damage the washing machine itself. For a particularly gentle wash, you should put the shirts in a net or pillowcase or turn them to the left. However, contamination will then not be removed as reliably.

Temperature, program and detergents

The ideal washing temperature is 100 degrees Fahrenheit. White shirts with stubborn stains can also be washed at 140 degrees Fahrenheit. An “easy-care programme” is particularly suitable, as it washes with more water and spins less – so shirts don’t get as creased and you have less ironing work. If possible on your machine, you can also reduce the number of spin cycles.

You should look at the detergent again for the color of your shirts: Solid detergent is suitable for white shirts, fine or colored detergents for colored shirts.

After the wash: Hanging and maintenance

As soon as the washing machine is ready, you should remove the shirts, hang them up and pull them straight. Of course, you can also put your shirts in the dryer. But make sure that the shirt is suitable for this and don’t use too high a temperature, otherwise, it will be over with the perfect fit of the shirt.

After drying, the last step in the care process is ironing.

How to iron a dress shirt properly?

Shirts that are not yet completely dry are particularly suitable. Alternatively, you can moisten dry shirts a little bit, for example with the spraying function of your iron or with a spray bottle.
Good preparation is everything. The right tool is not unimportant to the success of ironing. We recommend an ironing board or at least a smooth, heat-resistant and colorfast underlay. When ironing, it is best to use a steam iron with a spray function. Before you start ironing, look inside the label of the shirts you want to iron. There you’ll find an iron symbol with points. The number of dots indicates the ironing temperature you have to set on your iron. If you use a steam iron, you will need to fill it with water. It’s best to use distilled water, then don’t calcify your irons. Now pick up a washed shirt and off you go:

• Step 1: Ironing the collar – It is recommended to start ironing the collar. Put the shirt with the inside side on the ironing board so that the collar and shoulder section lie on the board in front of you and the rest of the shirt hangs down. First iron the collar side, which is folded in later. With one hand – right-handed people take the right hand, left-handed people take the left hand – hold the iron, with the other hand you pull the collar of your shirt flat or put a little tension on it. Moves the iron from the tip of the collar to the center of the collar. That way you can avoid wrinkles. Now iron the collar from the other side, the one that will later point outwards. If your shirt has collar sticks, stick them into the collar when you have finished ironing it from both sides.
• Step 2: Ironing the cuffs – Let’s now come to the cuffs, more precisely to a simple button cuff: put the cuff in front of you so that the buttons point up and iron them flat. Then iron the inside. You can iron into the sleeves, which makes it easier to iron the following sleeves. With a double cuff you have to do something different: fold the cuff apart lengthwise and iron it flat. Now fold the cuff so that the buttonholes lie on top of each other and press in the crease.
• Step 3: Ironing sleeves – With the sleeves, we now come to the trickiest part of shirt ironing. But don’t worry, we’ll make it work. We first put a sleeve on the back of the ironing board, spread it out and smooth it. Make sure that the bottom fabric does not wrinkle. Now iron from the middle inwards and outwards, the edges and crease are ironed at the end. Then we repeat the whole thing on the other side of the sleeve. When turning around, make sure that the crease remains on the top of the sleeve and does not slip. If you have a sleeve ironing board, you can use it as well: Pull the sleeve over the board and iron it evenly until the entire sleeve is smooth. A sleeve ironing board is particularly suitable if you don’t like a crease on the top of your shirts, i. e. round ironed sleeves are preferred.
• Step 4: Iron shoulder yoke – The so-called shoulder yoke, i. e. the shoulder section of the shirt, can best be ironed by placing the shirt with the inside on the narrow end of the ironing board. Start at one shoulder, push or pull the shirt around until the yoke is completely smooth.
• Step 5: Iron button facing – First iron the button panel from the left. Then iron the button bar again from the right side. Make sure that you iron around the buttons.
• Step 6: Iron front and back side – Finally, the front and back of the shirt come under iron: Just like for ironing the shoulder yoke, put the shirt with the inside on the ironing board. Tighten the shirt and iron the front, back and the other side of the shirt.

So, now you should have a perfectly ironed shirt in front of you so that you can cool down hanging down. Ironed shirts can also best be stored hanging on a hanger.

Quick Links

What Shirt Size Am I?

Finding a shirt that fits is the most important part of the buying process. A great-fitting shirt not only offers optimum comfort, but a defined silhouette that will ensure you always look your best. To find the perfect formal shirt, we’ve put together this handy Savile Row guide that tells you how to measure your shirt size.

Top Tips for Taking Your Shirt Measurements

When taking your shirt measurements for a formal shirt, it’s important to resist sucking in your stomach or puffing out your chest. Whilst this may boost your ego, the measurements you make will be wrong. For the best results, keep your body relaxed and ask someone else to take the shirt measurements for you.

Things You Need To Take Your Shirt Measurements

• Measuring tape
• Helper (recommended)

1. How to measure your neck

To determine your collar size, measure the bottom of your neck at the point where your collar would naturally sit. Make sure you can fit two fingers between your neck and the measuring tape to avoid opting for a shirt that’s too tight. If you find this tricky, simply measure as mentioned (without using your fingers) and add half an inch.

2. How to measure your chest

Standing with your arms by your side, take your tape measure and wrap it around the widest part of your chest. To guarantee accurate numbers, the tape needs to be level all the way around and parallel to the ground.

3. How to measure your arms/sleeve length

Keeping the tape on the top side of your arm, measure from the middle of the back of your neck and then over the top of your shoulder down to where you would like your cuff to sit.

Choosing a Savile Row Shirt

When purchasing formal shirts from our collection, you should chose a shirt based upon your collar measurement. The same goes for our casual styles – however you’ll need to refer to our size chart to work out whether you’ll be a size small, medium, large, extra-large or XXXL. You can see how to do this below:

Finding the Right Shirt Sleeve Measurement

Once selecting your correct collar size, you can then refer back to our size chart to determine if you should opt for our regular sleeve length or size up or down. You can select your preference on the product page, however if any further adjustments are necessary, simply email [email protected] and our expert tailors will be happy to make the required changes.

Final Tips for Finding a Shirt That Fits

• Take your measurements as accurately as you can. Try not to round up or down.
• Select the right fit for your body shape. Slim fit shirts will sit close to your body, whereas classic fit shirts offer more room.
• Avoid wearing bulky clothing when taking measurements.

Now you know your shirt size, you can shop our full range of men’s shirts, or if you’re looking for some inspiration, you can find out how to find the right shirt for every occasion.

Understanding Dress Shirt Measurements | Batch

Now, take the measurements you noted and compare them to the sizes listed in the fit guide size chart. The measurements should roughly match up. Every man’s body is slightly different and clothing has ease built-in to allow for movement. Each company adds in a different amount of ease based on their specified fit. Examples of types of fits are: traditional, fitted, slim and extra slim. Fits are a matter of preference to the brand. Our Batch fit is similar to other brand’s slim fit except with a bit more of a tailored cut.

• XS

  X Small

  Body Length: 29″
  Chest: 39″
  Your Sleeve Length: 34″
  You should wear Pant Size: 26 – 28″

• S

  Small

  Body Length: 29″
  Chest: 40″
  Sleeve Length: 34.5″
  You should wear Pant Size: 28 – 30″

• M

  Medium

  Body Length:  29.5″
  Chest: 42″
  Sleeve Length: 35″
  You should wear Jean Size: 31 – 32″

• L

  Large

  Body Length: 30″
  Chest: 46″
  Sleeve Length: 35.75″
  You should wear Jean Size: 33 – 35″

• XL

  X Large

  Body Length: 30.5″
  Chest: 50″
  Sleeve Length: 36.25″
  You should wear Jean Size: 36 – 40″

• XXL

  XX Large

  Body Length: 30.5″
  Chest: 54″
  Sleeve Length: 36.75″
  You should wear Jean Size: 42 – 46″

Pro tip: Some companies measurements are of the garments, not based on your body measurements. This is where it can get confusing. If this is the case, then their shirts already have ease built-in around the chest and waist so the measurements will seem larger than usual.

DEFINITIONS:

Whats The Difference Between Neck Size vs Collar Size?
Neck size is the measurement around your neck without ease. Collar size has length built-in to it to allow you to breathe, and for the collar to sit on your neck properly. If in doubt, you can instead note the collar size of a shirt that fits well allowing two fingers to still squeeze between your collar and neck.

Whats The Difference Between Arm Length vs Sleeve Length
Arm length is from the top of your arm to your wrist, this measurement starts at the shoulder and is often used for casual shirt sizing. Sleeve length for dress shirts are measured from the center of your back because dress shirts have a loose fitting shoulder and armhole that does not sit on your natural shoulder position. Shirts today are fitted more closely to the body and often the sleeve length could be taken from your arm length; however, the traditional measurement method still prevails in modern menswear. More on measuring sleeve length

Shop Shirts

 Size Chart – Men’s Wear : MyBarong

To make your shopping experience easier, our In Stock Barong sizes are described by the chest and sleeve measurements of the person.

Unlike the “letter size” system (Small, Medium, Large, etc.), our “measurement” size system is consistently reliable since you’ll find a Barong that matches your actual measurements.

(There are also measurement instructions for Custom Tailored Barongs)

To find the right size Barong for you :

1. Find your “chest size” in any of 4 ways:
   • Check the size label from a well-fitting dress shirt. The first number is your neck size. Use the table below to convert your neck size to chest size
     
     or
   • Check the size label from a well-fitting coat or suit jacket (for example: coat size 40 fits a 40″ chest)
     
     or
   • Convert your chest size from your shirt ‘letter’ size (S, M, L…)
     
     or
   • Measure your chest with the illustrated instructions below

   Choose a Barong with a chest size range that includes your size. (for example: a person with a 38, 39 or 40″ chest would choose a Barong size with a 38-40″ chest size range)

   Because Barongs are traditionally made to be loose-fitting, it’s fine to go up 2 inches or down 1 inch in chest size. For example, a person with a 46″ chest could fit well into a Barong with 46-48″ chest size; & a person with a 45″ chest could fit well into a Barong with 42-44″ chest size.

2. Find your Dress shirt sleeve length (if you’re buying a long sleeve Barong)
   • Check the size label from a well-fitting dress shirt. The second number(s) is your sleeve length
     
     or
   • Measure for your ‘Dress shirt sleeve length’ with the illustrated instructions

   Choose a Barong with a sleeve length range that includes your length. (for example: a person with a 33 or 34″ sleeve length would choose a Barong size with a 33-34″ (or slightly longer) sleeve length range)

Print this page

You’ll need a flexible tape measure (inches) and someone to help you place and read the measuring tape.

Corresponding neck sizes & chest sizes of ready-to-wear Barongs

Men’s size reference: U.S. size vs. Chest dimensions

A size label from a typical dress shirt(click image to enlarge)

For your convenience, we size our long sleeve Barongs with the “Dress Shirt Sleeve Length,” which is easy to find on the size label your own dress shirt.

Q: What is “Dress Shirt Sleeve Length?”
A: It is one of two numbers found on most “Dress Shirt” size tags (U.S. & Europe).

Usually, the first number is the neck size, and the second number is the “Dress Shirt” sleeve length.

For example, “15 � x 34/35” would be the “Dress Shirt” size that fits someone with a 15 �” neck & a 34″ to 35″ sleeve (as measured in the U.S. & Europe)

Illustrated instructions on how to measure your “Dress Shirt Sleeve Length”

Q: How do I use my “Dress Shirt Sleeve Length” to find the right Barong size?
A: Each of our Barongs have the “Dress Shirt Sleeve Length” listed in their size description &/or their item code.

Shop for Barongs that have your chest size and “Dress Shirt Sleeve Length” � and you’ll have Barong with a great fit!

Q: Why is the “Dress Shirt Sleeve Length” longer than the “Actual” sleeve length?
A: The “Dress Shirt sleeve length” is measured from the back base of the neck, over the shoulder, and down the arm to wrist.

The “Actual” sleeve length is measured from the tip of the shoulder, down the arm to the wrist.

Size Charts – Blessed Girl T-shirts

T-Shirt Size Charts

We offer the latest designs in tons of popular sizes from toddlers and kids to ladies cut and adults. If you have questions about our size-charts, feel free to Contact Us.

• Width= armpit to armpit measurement

A Straight-cut, cotton tee with a size based on chest measurement. Provides roomy fit, that does not contour to the body.

Please note: not all shirts are available in all sizes. Please see individual product for size selection.

Significantly smaller than the standard-sized, straight-cut tee, this shirt has smaller shoulders, shorter sleeves, and slightly tapered bottom. The neckline is thinner and fits closely to the neck. Fits one full size smaller than a standard T-shirt.

Hooded Sweatshirts – Customers usually prefer sweatshirts and hoodies to fit loosely, so you may want to order one size larger than you normally wear in a T-Shirt.

Save

Women’s sizes, women’s size chart

How to take measurements

Chest circumference

– determined as follows: measuring tape
applied at three main points: on the upper border of the bra side line, under the armpit
hollow and in the most prominent place of the chest. It is important that when moving the belt along
the cup of the bra up or down the size did not increase, but only decreased – in this case, the measurements will be correct.

Waist circumference

is the minimum length of the tape, that is, when moving up / down the indicator
only grows. Not all women have the waist at the level of the navel, the natural curve may be higher or lower, and your
the task is just to find the smallest size.

Hip circumference

– the measuring tape is not applied in the middle of the buttocks,
but along the most protruding part of them, while in front it should not sink or
overstate – the circle should be parallel to the floor.

All measurements are made in underwear, in a standing position.

How we measure the parameters of things

To make it easier to understand the selection of the size of women’s clothing, we offer a decoding of the size table:

Chest circumference

– the distance from one armhole of the sleeve to another at the level of the bust.

Waist circumference

– for shoulder products – the value in centimeters between the extreme points of the thing at the waist level, and for waist
things – the length between the side points of the upper cut.

Hip circumference

– the number of centimeters at the level of the maximum volume of the buttocks.

Length

– a parameter measured from the shoulder so that the line passes through the most prominent part of the chest to the edge of the garment.

Back

– Measured from the lower vertebra of the neck in the middle of the back to the edge of the garment.

Sleeve length

– determined by the outer edge from the shoulder to the very bottom.

Shoulder length

– is determined from the seam of the neck to the sleeve edge.

Length of the inner seam

– from the crotch of the jeans to the bottom along the seam.

Length of skirts and shorts

– is determined from the top edge to the edge of the product.

Reference: Requirements for documentation supporting the claim | UPS

Any claim made against UPS must detail the items contained in the lost, damaged, or unreceived shipments C.O.D. Your product descriptions should be as specific as possible and include, but is not limited to, product name, brand name, serial numbers, size, color and quantity. Providing a detailed description of the item will enable us to resolve your shipment problem more quickly.

Examples of valid item descriptions include:

Item types

1. Clothing: Brand name, color and size of item

• Example: Polo shirt and pants pajama set, size M, dark blue

2. Sanitary and hygienic and cosmetic products: brand, product name, product size, dispenser / container / can

• Example: 5 Pieces of Avon Sun + Sunscreen Facial Lotion, Sun Protection Factor 40, 3 oz, Yellow / Red Container
• Example: 20 packs of natural Vitamin E Vitacost, 1000 IU, 60 capsules

3. Stationery, books and photo frames: Item / product number, brand name, product type, quantity

• Example: 50 boxes of BIC Round Stic ballpoint pens, medium line width, 1.0 mm, black, 90 per box
  
• Example: 5 textbooks, Spectrum Science, paperback, brown cover, publisher: Frank Schaffe

4. Tires, parts and electronics: Part number, brand name, model, product number / ID number, serial numbers

• Example: 2 Michelin tires, Latitude Tour HP 235 / 65R18 104H BSW, off-road
• Example: Lenovo Ideapad 330 Laptop 15.6 ”, Windows 10, Intel Core i3-8130U Dual Core, 4GB RAM, 1TB Hard Drive – Platinum Gray

Note. Serial numbers allow for clear identification of items when searching in lost and found offices and are required for certain types of items to make it easier to find them. Such products include electronics that are priced in excess of $ 500. These goods include, for example:

• Mobile phones / watches
• Computers / iPads / Other Tablets
• Camcorders
• Stereo systems
• Garmin / other GPS systems
• Printers
• Drones
• Gaming systems
• Headphones (Beats / Bose)
• TV
• Hoverboards / Segways
• Soundbars
• Tape media / hard drives

If no serial number is provided, investigation will be closed due to Incomplete Item Description.You can resume your investigation by giving us the serial number.

Sizes of men’s clothing on tags and labels – Printing house “Two Maples”

Selection of men’s clothing according to the information on the tags and labels.

Contents.

1. Introduction.
2. Standard clothing sizes.
3. Standard trousers sizes.
4. Standard shirt sizes.
5. Correspondence of sizes of men’s clothes in different countries.
6. Non-standard sizes.
7. Conclusion.

Introduction.

There is an opinion that it is much easier for a man to choose clothes for himself than for a woman.
This is partly true, since men’s clothing is generally more modest and less diverse.
But it is precisely because of this circumstance that the problem of the correct selection of the size of a suit, trousers or shirt comes to the fore.

As it was said in one popular film: “The main thing is that the suit“ fits ”.

At first glance, the problem is not particularly difficult to solve, since there is a “standard” system of sizes for menswear, based on several

the main parameters of the male body: height, neck girth, chest girth, waist girth, hip girth and waist height.
However, the figure of many men quite often differs from the “standard” one, for example, when the shoulder girdle is significantly wider and more voluminous than the hip.
In this case, it is necessary to clarify the size of the “top” and “bottom” using additional individual measurements.
In addition, the height and weight of many men is very different from the “standard”, which also entails the need to clarify the size.

An additional difficulty in choosing clothing as a whole and its elements separately when buying in online stores is created by the fact that different countries have adopted different systems for marking clothing sizes applied to hanging tags and sewn-in fabric labels, as well as to labels for clothes for children.
In this article, we will try to systematize information about determining the size of men’s clothing so that this task will never again cause you any difficulties.

Up ↑

Taking measurements.

To measure body parameters, you will need a centimeter tape and an assistant who will take measurements (taking measurements on your own is fraught with errors that can lead to significant errors in determining the size of clothes).
During the measurements, the man should stand upright, without straining his muscles or pulling in his stomach.
Measurements of girths should be taken so that the tape fits snugly against the body, but is not overly taut.It is recommended to add 1-2 centimeters to the measurement results.
It is recommended to take measurements in thin clothes or in underwear.

Neck circumference – wrap the neck with a tape measure about two centimeters above the junction of the neck with the shoulders (for many men, this is the lower part of the Adam’s apple). A “non-circular” result should be rounded up to the nearest centimeter.
Chest circumference – the measuring tape runs along the most prominent points of the chest, on the sides – under the armpits.
Waist circumference – measured strictly horizontally at the level of the narrowest point of the waist.
Hip circumference – the measuring tape runs horizontally along the most prominent places of the buttocks.
Height – It is best to measure height with your back and the back of your head against the wall, on which a mark is made at the level of the crown, after which the distance from this mark to the floor is measured.
Waist height – the distance from the waistline to the floor.

Up ↑

Standard clothing sizes.

“Standard” refers to the proportions of the body that are common to most modern men. It is according to the “standard” patterns that the mass production of men’s clothing is organized.
In Russia, the basis for measuring men’s clothing is the half-girth of the chest, expressed in centimeters. It is this indicator that appears on hanging labels and sewn-in fabric labels.
In other words, if a man’s chest girth is 100 cm, then his clothing size is 50.
Height from 148 to 204 cm and waist height from 98 to 126 cm are considered standard.

In addition to size, the labels indicate height, which is divided into the following ranges.

If a sewn-in label usually indicates a two-digit clothing size (48, 50, 52, etc.)then three parameters are often printed on the hinged tag – height, chest girth and hip girth (for example, 176-95-100).

Up ↑

Standard trousers sizes.

To determine the size of men’s trousers, the same measurements are used as when determining the size of all other types of clothing – height, as well as waist and hips.

The height scale for trousers has a slightly smaller step – 4 cm instead of eight, like the rest of the clothes.

Some domestic manufacturers of trousers can place on labels and tags their size as a fraction, in the numerator of which is the half-girth of the waist, and in the denominator – height (for example, 54/176).

The above trouser sizing charts do not apply to jeans sizing which is based on measurements of the waist and inside leg length. You can read about the labeling of jeans in the article “What does the label on jeans say?”

Up ↑

Standard shirt sizes.

The main factor that determines the size of the shirt is the neck circumference, expressed in centimeters. It is he who is indicated on the sewn-in fabric label placed on the inside of the collar.
However, so that the collar of the shirt does not turn out to be too tight, it is recommended to add 1-2 cm to the measurement results, but even more, since a collar that is too large will wrinkle the tie.
In the Russian system for measuring the size of men’s shirts, the size of the outerwear also corresponds to the girth of the neck.

Up ↑

Correspondence of sizes of men’s clothing in different countries.

Fortunately, the system for measuring the size of men’s clothing in almost all of Europe coincides with the system adopted in Russia, however, the systems adopted in the United States and China have very significant differences.
In addition, the international letter system for designating clothing sizes is becoming more widespread.
Below are the tables of correspondence between the sizes of men’s clothing applied to labels and tags in different countries.

The following abbreviations are used in the letters on the tags and labels:

• S ( S mall) – small;
• M ( M edium) – medium;
• L ( L arge) – large;
• X (e X tra) – “extra-size”, i.e.that is, very small or very large.

Up ↑

Non-standard sizes.

The standard proportions of the figure described above are characteristic of most men, but by no means all. Therefore, many clothing manufacturers use an expanded system for classifying men’s clothing sizes, which includes four types of male physique, which are indicated on labels and labels as follows:

N – clothing sizes for men with a standard figure, whose height is more than 162 cm …For men of a standard physique, clothes with sizes from 42 to 82 sizes (even numbers) are suitable.
B – clothing size designed for men with a tummy and taller than 168 centimeters. Clothes from 51 to 81 sizes (odd numbers) are intended for them. Unfortunately, not every sewing company is engaged in sewing clothes for category B, so this size group may not be available in some online stores.
S – this group is suitable for tall and thin men, whose height is more than 177 cm.Sizes in this category range from 90th to 126th. In addition, for men of very tall stature and with long arms and legs, some manufacturers provide sizes 194 and 198. When sewing trousers and jackets for these sizes, relatively narrow hips and long limbs are taken into account.
U is a range of menswear sizes designed specifically for stocky, strong men. This size category includes sizes 24 to 38.

N-sizes – for men with standard proportions.

B-sizes – for men with a large waist.

S-sizes – for slim men.

U-sizes – for stocky men.

Up ↑

Conclusion.

As you can see, manufacturers of menswear produce a very wide range of products for men with very different complexions. Therefore, using the above tables, a man can pick up clothes for himself even without trying on, using only information from tags and labels, as well as from descriptions in online stores.
However, if you still have not found your parameters, then all you have to do is recommend purchasing clothes according to the maximum measurements and giving them to a sewing studio, where they will be manually driven to your figure.

We wish you a good shopping!

Up ↑

© Two Maples Printing House.
When reprinting, a link to the site is required.

See also:

Types of fabrics for men’s shirts (shirts)

MATERIAL

Historically, 99% of modern men’s shirts are made from cotton. Cotton outperforms other fabrics in durability. Cotton is preferable because it washes well and does not require additional maintenance.In addition, cotton meets the quality-price conditions. It is believed that the best cotton in the world is produced by North America and Egypt (varieties Sea-Island, Mako, Louisiana). Most of the shirts are made from short-haired cotton from India and Central Asia.

The length of the cotton fiber ranges between 16.5 and 43 mm. The length of the original fiber (the length of the fiber obtained from 1 gram of raw material) determines the number of the produced yarn. The longer the fiber, the higher the yarn number. For example, if the yarn has a number of 40, this means that from one gram of cotton, 40 meters of thread is obtained.

From long staple Egyptian cotton , the highest quality textile products are made. The main advantage of this cotton is the length of its fibers – 35-44 mm. Egyptian cotton yarns are thinner and stronger, resulting in increased fabric density. Therefore, Egyptian cotton can be made of durable and high-quality materials, which at the same time will weigh less and better breathe.

The virtues of Egyptian cotton:

• High thermal conductivity. Egyptian cotton is distinguished by high moisture absorption, it does not heat at all and cools perfectly, and therefore is indispensable in hot countries.
• Breathability. In cotton clothes, your body will feel comfortable, fresh and cozy.
• High hydrophilicity. Cellulose, which accounts for more than 90% in cotton fabric, absorbs moisture well.
• Soft to the touch.
• High strength. Single fiber withstands 2 to 8 grams of weight. Strength increases with moisture and decreases due to drying, as well as with prolonged exposure to light.
• High heat resistance. In a dry atmosphere, cotton can withstand up to 150 ° C. It is recommended to iron Egyptian cotton products using steam or damp.
• Easy maintenance. Cotton fabric does not require special washing modes, products can be boiled, it is allowed to use concentrated detergents and chlorine bleaches (diluted during rinsing).· Resistant to alkaline attack.
• Hypoallergenic. Despite the widespread use of chemicals during the cultivation and manufacture of cotton fabric, the finished product does not cause allergies.

Shirts from Cotton Blend are made from fabrics that are a combination of natural and synthetic fibers.

Shirts are generally made from two types of cotton blends: a cotton blend and polyester and a cotton blend and Lycra . Polyester fibers do not wrinkle and dry quickly, so shirts containing these fibers do not shrink or wrinkle. Polyester cotton shirts do not shrink after washing, unlike pure cotton fabrics.

Lycra (otherwise known as spandex ) is combined with cotton to create a stretch fabric. This fabric is especially good for creating tight-fitting shirts. The combination of artificial and natural fibers allows you to achieve results that are not possible with pure cotton fabrics.

TECHNOLOGY

Yarns

For the manufacture of men’s shirts, fabric is used from yarn that has passed the procedure of twisting (single and double) and processing.

Woven fabric from single twist yarn is the most common fabric in the manufacture of both custom-made shirts and shirts of mass production. The difference is in the number of yarn used, in the length of the yarn obtained during the processing of cotton. Shirts for mass production are made of yarn not exceeding No. 30 single twist.Shirts made of such fabric are a universal combination of price and quality. The single-twist fabric feels soft and breathable even at yarn number 40.

Double twisting (in English it is – two ply or to fold) is a way to enhance the wear-resistant properties of the future fabric by twisting the yarn in half. For sewing business-class men’s shirts, double-twisted yarn no lower than No. 80 is used. The higher the yarn number, the more pleasant the fabric of the shirt is to touch the body. On yarn number 160, the cotton fabric feels like silk.In the characteristics of fabrics, this is referred to as 2X2, that is, a thread twisted in half both along the warp and along the weft.

Various types of shirt fabrics are made from yarns in the weaving process. Basically, the peculiarity of the fabric is determined by the variants of the weave of the threads – warp and weft . Warp thread refers to threads running parallel to each other in the fabric, along the fabric. In the process of weaving, it is the warp threads that I stretch, bend to lay the weft thread between them. Weft are transverse threads that run perpendicular to the warp threads and intertwine with them during the weaving process.Basically, the fabric is currently produced on looms with pneumatic weft threading. Due to the specifics of the process, it was impossible to produce shirting fabric from yarns thinner than 120’s on manual and mechanical weaving machines that were used earlier, provided that this machine was running very slowly. But in the case of the production of such a fabric, one could be sure of its quality (expressed, ultimately, in wear resistance, and hence durability), since the level of internal defects of the warp and weft threads was minimized due to the peculiarities of the production technology.
Already in the first quarter of the 20th century, weaving looms with pneumatic insertion of the weft thread were created. This has resulted in the ability to create fabrics from 2×2 yarns 140’s, 160’s, 170’s, 180’s, 200’s, and 240’s.

For branded and custom-made shirts, yarn fabrics from number 100 are used. The finest yarn is 200X2, 240X2. The yarn of such numbers can be spun only from the finest and longest cotton fibers of Sea Island and rarely Mako. The annual harvest of such cotton is 1-2% of the total world harvest.For this reason alone, such fabric cannot be cheap. At the same time, as far as I know, such cotton is harvested by hand, and not using mechanical devices, such as combines: manual labor becomes more expensive everywhere – another plus to the cost of the finished fabric.

# 200’s double twist yarn is thinner than human hair. The thinner the yarn, the more pleasant the fabric is for the body. Starting from No. 160, the sensation of such a cotton fabric is the sensation of silk. But the thinner the yarn, the harder it is to weave and, accordingly, the more expensive the fabric made from it is.Twisting two strands of yarn before making the fabric is also an additional and costly option, which also increases the cost of the fabric. All these nuances and nuances make the price of the fabric so heavy that often a shirt made of fabrics woven from high numbers of yarns is comparable to the price of a good suit.

Fabric density.

High-quality fabric should contain at least 60X30 threads on the weft and warp in one centimeter. This rule can only be violated in some “veils”.
Ideally, the number of warp threads is the same as the number of threads in the weft. Then the finished fabric will have the greatest strength. In practice, this is rarely the case for technological reasons. Good manufacturers sometimes set the balance of strength in certain types of fabrics by increasing the number of weft yarns.

Finish

After the weaving process, the fabric must go through a finishing process. This is an equally important process, since only the final finishing gives the fabric a presentation.There are many finishing processes, and each of the manufacturers has its own technological secrets – therefore, it would seem that fabrics of different manufacturers, which are the same in weave, density and other characteristics, differ from each other both in appearance and in tactile sensations and, ultimately, in wear resistance.

So, for example, when processing with a solution of caustic soda beats. weight 1.25 cotton fiber is greatly shortened (up to 20%) and, as it were, swells, turning into a smooth cylinder with a barely noticeable inner channel.This gives the fiber a strong sheen. This process is called mercerizing named after John Mercer. In this case, the cotton fiber becomes stronger, and its ability to dye increases. Mercerizing cotton allows you to dye it in bright, juicy tones and, quite often, this shine is unknowingly perceived as an admixture of synthetic fiber.

And this is just one of the finishing processes. Some fabric manufacturers do not do the finishing themselves, but transfer their fabrics for finishing to other firms.Italian and Swiss factories are considered the best in the finishing of shirt fabrics. Finishing a fabric, like many stages of creating a product, is not an exact science – it is rather an art, so the stability of finishing can vary from batch to batch. The fabric can be either softer, or harder, and so on.

FABRIC TYPE

As a result of the weaving process for shirts, various types of fabrics are created by weaving warp and weft threads. The most common types of fabrics, obtained mainly by varying weaves and used to make shirts, are: poplin, (voile) voile, oxford (oxford), royal oxford (royal oxford), twill (jacquard) , dobby, crepe de chine, charmeuse, faille, tone-on-tone, chintz, mesh, matting and others.

The most popular types of fabrics include:
Plain weave (Poplin)
Weave weave “Matt” (Pinpoint, Oxford, Royal Oxford)
Weave “Twill” (Twill, Gabardine, Cavalry, Herringbone)
Jacquard fabric (Jacquard , Dobby).
Satin fabric

MEN’S SMOOTH FABRIC SHIRTS ( Poplin )

Poplin is a smooth and durable fabric. It was made already in the XIV century.in the French city of Avignon. During the Avignon captivity of the popes, the fabric acquired its modern name – poplin, which means “papal fabric”.

Poplin is a common plain weave.

Poplin is a simple weave and warp thread. The weft threads are straightened, and the warp thread density is higher than the weft thread density. Thus, the front side forms a small transverse scar. The most appropriate from poplin look classic suit shirts for the most formal situations.

MEN’S OXFORD FABRIC SHIRTS

Fabric Oxford got its name from the creators – owners of a textile factory in Scotland. Oxford fabric appeared in the 19th century and was originally made from pure cotton, but now various synthetic fibers such as polyester and rayon are added to this fabric.

The peculiarity of the Oxford weave is that the weft thread is thicker than the warp thread. This type of fabric belongs to the so-called “matting” weave.To create Oxford fabric, dyed and unpainted threads are used, thereby achieving the effect of a small cell.

These shirts are suitable for both formal occasions and everyday wear. Oxford shirts are low maintenance, can be washed frequently and retain their shape much better than other types of shirts, they are very durable and practical. Oxford fabric is very light and breathable, so it is perfect for sewing summer shirts for men.Especially comfortable in Oxford shirts will be for those men who lead an active lifestyle, are constantly on the move and whose every day is scheduled by the minute.

MEN’S PINPOINT SHIRTS ( Pinpoint )

The Pinpoint weave is a variation of the Oxford fabric. Shirts are made from this fabric, which are ideal for everyday life and wear outside of work. Pinpoint weave is woven in the same way as Oxford, but uses a different yarn to create it, resulting in less weight.

There are two ways to determine how soft a fabric is. Fabrics with a higher yarn count are of higher quality and are therefore softer and more pleasant to the touch. That is why clothing made from Egyptian cotton is so highly prized. Another indicator of softness is the weight of the fabric. Pinpoint weave is lighter in weight than Oxford. Therefore, Pinpoint weave shirts are much softer than Oxford shirts. This is due to the fact that thinner yarns are used when sewing shirts made of Pinpoint weave.

Synthetic fibers are sometimes included in Pinpoint weave. Due to the fineness of the material, men’s pinpoint weave shirts can wrinkle very quickly. That is why many men prefer Oxford shirts. If ironing your shirt is not a problem for you and you appreciate the lightness and softness of the material, then a shirt made of “Pinpoint” weave fabric will be an excellent option for you.

MEN’S TWILL FABRIC SHIRTS ( Twill)

Shirts made of twill fabric, such as Twill, have a distinctive weave pattern of parallel diagonal veins.

Parallel, diagonal “veins” are created on the twill thanks to the special weaving of the weft threads. Unlike Oxford fabric, where the weft and warp are simply intertwined and the weft runs over and under the warp, twill creates a slightly different weave. There are two types of twill weave – 2/1 twill and 2/2 twill. If the weft thread goes over two warp threads and under two warp threads, then it is a 2/2 twill. If the weft thread passes over two warp threads and under one warp thread, then this is a 2/1 twill.

Due to the peculiarities of weaving, the twill drapes very well.
In addition to the unusual weaving of the fabric, there is another characteristic feature of twill shirts. As a rule, fabrics for shirts do not have front and back sides. The twill is divided into the front part and the back part. On the front side of the twill, an unusual weaving pattern is more clearly visible. Striped twill shirts look especially good, as the twill weave favorably emphasizes and enhances the striped pattern on the fabric.

MEN’S HERRINGBONE SHIRTS ( HERRINGBONE )

Herringbone belongs to the family of twill fabrics (only it has a V-pattern, not a pattern in the form of parallel diagonal lines). This pattern is created by alternating the direction of the twill weaving. If you look closely at the traditional twill, you can see that the diagonal lines in its pattern are located not only in parallel, but also in the same direction.The name of the herringbone fabric is due to the fact that if you look at the V-shaped pattern from a certain angle, it will resemble a herringbone.

Herringbone fabric is often used for sewing shirts. The interesting herringbone pattern looks especially advantageous on colored shirts. If you compare a white Oxford shirt with a white herringbone shirt, you can see the difference. The unusual herringbone weaving method creates the illusion of completeness and neatness. Herringbone fabric may appear thicker than Oxford fabric, but on closer inspection, herringbone fabric is still more attractive because it is smoother to the touch and looks more elegant.Twill fabrics tend to be resistant to water (this is both their advantage and disadvantage). The obvious benefit is that herringbone shirts do not need to be added in any detail: they are original and attractive on their own.

MEN’S JACQUARD SHIRTS ( Dobby)

Jacquard (Jacquard ) – is a fabric, the interweaving of threads in which forms a relief pattern.The fabric is made using a special loom with jacquard weaving. These weaves are simple, when they are formed from two systems of threads by a combination of simple and small-patterned weaves, and complex, when they are formed from three or more systems of threads. The special machine was invented back in 1801 by Joseph Marie Jacquard. To date, the principle of operation of such a machine has not changed, except that now it works with the help of computer technology.

Dobby ( Dobby ) – a simplified version of jacquard.This is what is commonly called woven fabrics for the production of shirts. This type of fabric can have a variety of corrugated patterns. The fabric gets this look thanks to special weaving techniques and the use of threads of different sizes. Classic white looks especially rich and luxurious. A dobby shirt is suitable for both formal and informal situations.

Dobby shirts are similar to jacquard shirts, but have a simpler woven weave. Dobby fabric is one of those materials that are particularly strong and durable, so shirts of very high quality are obtained from it.Another advantage of dobby fabric is that it can be easily dyed in a variety of colors. Therefore, this fabric is very often used in the textile industry.

Due to the structure of the woven weave, dobby shirts are practically wrinkle-free, so they are very convenient to use for everyday wear. Dobby shirts are just as comfortable and lightweight as cotton shirts, but they do not have the disadvantages of cotton fabrics (in particular, they do not wrinkle or wrinkle).Dobby fabric (depending on the type of yarn) is used for both casual and evening wear. So, for evening dresses, dobby fabric is used, woven from artificial silk.

MEN’S SATIN SHIRTS ( SATIN)

Satin (fr.satin ) – comes from Zaytun – the ancient Arabic name for the Quanzhou harbor in China, where this type of fabric was brought from. Satin was originally a type of silk fabric.After all, it was completely made in China from silk. However, at the end of the 19th century, a technology was invented, in which silk threads were replaced by cotton ones. Now for the manufacture of satin fabrics, depending on the needs and tasks, including artificial and synthetic threads are used.

Satin combines the practical qualities of cotton with the softness and sophistication of silk. Due to its qualities, satin is widely used for the manufacture of men’s shirts.

Satin has a smooth, silky texture on the front side.For the base, there is a dense thread, and twisted and thin, elongated for the front surface. There is an alternation of 4 warp threads and one front thread. When using tightly twisted threads, satin gets a noble shine.

The use of mercerization in the production technology of satin fabric gives satin high density and durability of the paint. With the sequential processing of the fabric with alkali and acid, the fibers swell, small fibers are removed from the threads.

Satin fabrics for men’s shirts are distinguished by lightness and softness, hydroscopicity, low thermal conductivity (cool in summer, comfortable in winter), wear resistance.The linen wrinkles a little and does not shrink with proper washing. The pattern applied to the fabric is abrasion resistant and remains bright for a long time. Satin made of natural fabrics does not cause allergic reactions and is comfortable to wear on a naked body.

USEFUL ARTICLES

How to choose the right men’s shirt?

All about men’s white men’s shirt.