How do you string a hidden top string for lacrosse. What are the key steps in stringing a 10 diamond mesh. Why is the hidden top string technique preferred by many players. What materials do you need for stringing a lacrosse head.
Understanding the Hidden Top String Technique
The hidden top string technique has become increasingly popular among lacrosse players for stringing their sticks. This method offers several advantages over traditional top string approaches:
- Provides a cleaner, more streamlined look
- Allows for better ball control and feel
- Creates a more consistent pocket
- Reduces wear and tear on the mesh
The key difference with a hidden top string is that the mesh is not directly attached to the scoop of the head. Instead, it “floats” slightly above, held in place by the top string itself. This creates a small gap that many players find improves the overall performance and feel of the stick.
Essential Materials for Stringing Your Lacrosse Head
Before you begin the stringing process, it’s crucial to gather all the necessary materials:
- 10 diamond lacrosse mesh
- Lacrosse string (typically 30 inches)
- Scissors
- Lighter (for sealing string ends)
- Lacrosse head
- Pliers (optional, for tightening knots)
Can you string a lacrosse head without proper materials. While it’s technically possible to improvise, using the correct materials ensures the best results and longevity for your pocket. Investing in quality mesh and string will significantly improve your stringing experience and the performance of your stick.
Preparing Your Mesh for Stringing
Proper preparation of your mesh is a crucial step that many players overlook. Here’s how to get your mesh ready:
- Stretch the mesh gently to loosen it up
- Fold the top row of diamonds over to create a clean edge
- Ensure the mesh is centered and square with the head
Is stretching the mesh really necessary. Yes, stretching helps remove any initial stiffness and allows the mesh to conform better to the head shape. This results in a more consistent pocket and improved ball control.
The Importance of Mesh Quality
Not all lacrosse mesh is created equal. Higher quality mesh often features:
- Weather-resistant coatings
- More consistent diamond shapes
- Better durability over time
Investing in good mesh can make the stringing process easier and result in a better-performing stick.
Starting Your Hidden Top String
The first steps in creating your hidden top string are critical for establishing a strong foundation:
- Tie a double overhand knot at the end of your string
- Secure the mesh to the sidewall of the head (typically using the top sidewall hole)
- Begin the top string by going through the back of the second mesh diamond and then through the first top string hole
Why start with the second diamond instead of the first. Starting with the second diamond allows for a smoother transition and helps maintain the “hidden” aspect of this technique. It also provides more stability for the rest of the stringing process.
Mastering the Double Overhand Knot
The double overhand knot is a crucial element in lacrosse stringing. Here’s how to tie it:
- Create a loop with the string
- Pass the working end through the loop twice
- Pull tight to secure
This knot provides a secure anchor point that won’t slip under the tension of gameplay.
Navigating the Middle Diamonds
As you progress across the head, you’ll encounter several options for handling the middle diamonds:
- Bridging: Skipping a diamond to create a looser feel
- Single knot attachment: For a tighter, more controlled pocket
- Double knot attachment: Offering maximum security and consistency
Which method should you choose. The best approach often depends on your playing style and position. Attackmen might prefer a looser pocket for quick releases, while defenders might opt for a tighter setup for better ball control during checks.
The Bridging Technique
Bridging involves skipping a diamond and connecting two non-adjacent diamonds. This creates a small “float” in the mesh, which can enhance ball feel and release. To bridge effectively:
- Skip the third diamond
- Connect the second and fourth diamonds
- Ensure tension is even on both sides
Bridging can be particularly effective in the center of the pocket, where it can help create a deeper channel for improved ball control.
Finishing Your Hidden Top String
As you approach the far side of the head, maintaining consistency is key:
- Continue your chosen pattern (bridging, single, or double knots) across the head
- Ensure tension remains even throughout
- Secure the final diamond to the opposite sidewall
- Tie off with another double overhand knot
How tight should the final knot be. The final knot should be snug but not overly tight. You want to secure the mesh without distorting its shape or putting undue stress on the sidewall.
Fine-Tuning Your Pocket
After completing the top string, take a moment to assess and adjust:
- Check for symmetry across the pocket
- Adjust tension as needed for desired pocket depth
- Ensure the mesh sits evenly in the scoop
Remember, a well-strung top string sets the foundation for the entire pocket. Taking the time to get it right will pay dividends in your stick’s performance.
Common Mistakes to Avoid
Even experienced stringers can fall into some common traps. Here are some pitfalls to watch out for:
- Uneven tension across the top string
- Attaching the mesh directly to the scoop (defeating the “hidden” aspect)
- Skipping too many diamonds, creating an unstable pocket
- Over-tightening, which can warp the mesh or head
How can you fix an unevenly strung top string. If you notice unevenness, don’t be afraid to undo your work and start again. It’s better to take the time to get it right than to play with a suboptimal pocket.
The Importance of Practice
Like any skill, stringing improves with practice. Consider these tips:
- Start with older heads or spare mesh to hone your technique
- Experiment with different patterns to find what works best for you
- Seek feedback from experienced players or stringers
The more you string, the more intuitive the process will become, allowing you to create consistently great pockets.
Maintaining Your Strung Lacrosse Head
Once you’ve perfected your hidden top string, proper maintenance is crucial for longevity:
- Regularly check for loose strings or knots
- Clean your mesh after playing in wet or muddy conditions
- Store your stick in a cool, dry place to prevent warping
- Consider re-stringing every season or as needed
How often should you re-string your stick. The frequency depends on how often you play and the conditions you play in. As a general rule, consider re-stringing at least once per season, or whenever you notice significant wear or changes in your pocket’s performance.
The Impact of Weather on Your Pocket
Different weather conditions can affect your pocket:
- Hot weather can cause mesh to stretch
- Cold weather may make mesh stiffer
- Wet conditions can temporarily change pocket depth
Understanding these factors can help you adjust your game and maintenance routines accordingly.
By mastering the hidden top string technique and understanding the nuances of lacrosse stick maintenance, you’ll be well on your way to optimizing your equipment for peak performance. Remember, the perfect pocket is a blend of technique, materials, and personal preference. Don’t be afraid to experiment and find what works best for your playing style.
How To String Hidden Top String Lacrosse
Posted By: Matthew Rode
When stringing a lacrosse head our go-to lacrosse top string has been the 9D Hidden Lacrosse Top String. Compared to a regular 9D and 10D lacrosse top string, we have found the 9 Diamond Hidden Top String the most consistent and easiest to string a symmetrical lacrosse top string.
The difference between a standard 9d top string and a hidden 9d top string is how the lacrosse mesh is attached to your lacrosse head scoop.
- The 9D Standard Top String anchors down the lacrosse mesh to the lacrosse head scoop; keeping the mesh secured against the plastic.
- The 9D Hidden Top string utilizes a float between the lacrosse mesh and lacrosse head scoop, but is held in place by the lacrosse top “string”.
The 9 Diamond Hidden Lacrosse Top String is a pretty simple top string to learn for any lacrosse player learning how to string a lacrosse head.
We have outlined 5 easy steps to take when stringing your lacrosse head top string below.
Total Time: 1 hour
Prepare Your Lacrosse Stringing Materials
Stretch and fold your lacrosse mesh
Double Overhand Knot
Tie a double overhand knot or watch our video on how to string a double overhand knot
Secure your Lacrosse Mesh to Your Lacrosse Head Sidewall
The photo below shows how we completed step 1 by locking the mesh down to the sidewall. Normally, I would use one sidewall hole and double loop it, but since this head was not designed for that; I had to improvise. This is the first step to stringing a lacrosse stick.
Attach the 2nd Lacrosse Mesh Diamond to the 1st Top String hole
Imagine how you would do a normal 9 diamond top string, but without actually locking the mesh to the scoop. First, you will want to go through the back of the mesh and then the back of the head.
After you go through the back of the head, go to the string which is shown in the right photo.Skip, Bridge, or Attach The Third Lacrosse Mesh Diamond
Option 1 – This Lacrosse Top String variant shows how you can “bridge” the 3rd diamond between the 1st and 3rd Top String Hole.
Option 2 – This Lacrosse Top String variant shows how to attach the 3rd lacrosse mesh diamond with the 9D Hidden Top Sting Knot.
Option 3- This Lacrosse Top String variant shows how to attach the 3rd lacrosse mesh diamond with a Single 9D Hidden Top Sting Knot.
Continue Across Your Lacrosse Head
Now it’s a pretty repetitive process for the rest of your lacrosse top string. As you work your way across your lacrosse head repeat the tactics you learned in steps one through four.
Finished Lacrosse Head Top String
the final view
After you go through the back of the head, go to the string which is shown in the right photo.Supply:
- Lacrosse Mesh
- Lacrosse String
Tools:
- Time
Materials: Lacrosse Head
About Matthew Rode
Founder of Stringers Society, seasoned stringer with a deep appreciation for the game of lacrosse.
The New Era of Lacrosse Mesh
The New Era of Lacrosse Mesh | Universal Lacrosse Blog
Skip to content
Free Shipping – Orders Over $99
MDW – 5% Cash Back Rewards
Lacrosse’s Best Rewards Program
East Coast Dyes’ new Vortex mesh is more of a new revolution of lacrosse mesh bringing a new concept to the current stringing market. For nearly 20 years, mesh has been the same with little to no change other than materials used. 10 diamonds across and 14 diamonds long with a uniform diamond structure. Over that span of nearly 2 decades, our game has seen changes from game play, to stick and stringing rules… Vortex Mesh offers the first big change to stringing supplies! ECD used their iconic LTH fibers which have proved themselves to be durable in all types of weather and paired them with the new HybridWeave concept. This mesh has 2 different diamond structures in the same piece of mesh! Conventional
hexagonal diamonds outline the perimeter of the mesh which allows you to string a stick like you always have, without having to learn new techniques.
Square diamonds strategically placed within the center of Vortex Mesh to create the ultimate sweet spot pocket. This HybridWeave technology simulates the feel of having a V or U shooting string, which has been recently outlawed, for increased feel and ball retention.
This must be how people felt when they first starting using mesh rather than traditional leathers. I for one am elated to see ingenuity and innovation involved in our great game. But what’s next??? Maybe some kind of cross-concept between the Warp and Vortex mesh? Like a duel diamond structured mesh directly fused to the lacrosse head.. Imagine that..
Last year Warrior Lacrosse introduced their Warp lacrosse head. The first lacrosse head to utilize a new “mesh” concept in nearly 2 decades. They used a polypropylene material and a 3D knitting process to mold the fabric directly into the lacrosse head with a kevlar bond. The Warp is also unique in the fact that it does not require sidewall stringing or shooting strings. Warrior engineered each pocket for peak performance right off the shelf.
It takes some time to get use to but I see where they wanted to go with the idea.
Warrior Lacrosse and East Coast Dyes continue to innovate and change the game. And I feel like these two lacrosse goliaths have just paved the way for future innovations! The Warrior Warp is now available and ECD Vortex mesh will be available Friday 11/25 at your local Universal Lacrosse location or you can shop online at Universal Lacrosse.
the idea.
Leave a comment
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Introducing Vortex Mesh from East Coast Dyes
Nov 21, 2016
In The Works: The First Professional Lacrosse Stadium
Dec 1, 2016
Call Our Experts
(844) 487-2558
Free Shipping
Free Shipping on all orders over $99
2.5% Cash Back
Join Lacrosse’s best rewards program
Secure payment
Fast & Easy Secure Checkout
How to weave a ball of beads: a scheme for three, four and five beads.
Easter egg from beads: weaving pattern for beginners
Creating spherical shapes
Beads are a voluminous material. To make balls of beads, or rather, products as close as possible to them in shape, weave polyhedrons. There are at least three basic forms based on 3, 4 and 5 beads. To make them, you will need quite a bit of beads: 6, 12 and 30 pieces, respectively. Depending on the size of the beads, the balls are obtained from 1 to 10 cm in diameter.
For the simplest three-dimensional figurine, it is better to take larger beads, otherwise it will be very small. Here is a short tutorial on how to make a ball with three beads:
- Dial 3 beads and lock into a ring. Leave one edge of the working thread 10-15 centimeters long for the convenience of tightening the finished figure.
- Add 2 more beads to the working thread. Secure them by threading the needle through the first and second beads in sequence.
- Cast on the sixth bead, pass the needle through the fourth, second, and third.
- Complete the figure by connecting the fifth, sixth and third beads again. The thread can be hidden.
If you want to weave a fullerene from beads, the ball weaving scheme starts with 5 beads. The initial stage of creating such a ball is similar to weaving a flower. When using small beads, such balls can be hung on a fastener and get earrings, as well as used as components of necklaces, bracelets, key rings.
Larger beads can be used as a base for layered designs. Such specimens will attract attention not only with regular geometric shapes, but also with a bright play of light on the edges. Faceted beads and bicones are well suited for such models.
Mosaic weaving
If the craftswoman does not know how to crochet, and the solid pattern for the ball is very attractive, then mosaic weaving can be used.
Two methods have been developed here:
- from the edges to the middle;
- from center to edges.
The difference between the methods seems to be small, but very significant. In the first case, 2 halves are created, which are then sewn together on the frame. In the second, a “belt” is first woven on two threads, and then hemispheres are made. The variety of patterns obtained is great, and when using beads of different sizes, it tends to infinity.
Knitting a toy for the Christmas tree
Another interesting method of creating Christmas decorations can be weaving with a hook. For this work, you will need a special pattern, thin yarn, a small hook for 0.7-0.8 and a lot of patience.
The scheme of work is approximately the same as when creating harnesses. Following the layout, dial the required number of beads per thread.
Then start knitting a ball following the 6-wedge circle rule. It is better to use with an amigurumi ring, then the initial row can always be pulled up. When knitting, a spiral stroke and single crochets are used. It is important to ensure that the thread does not cling to already knitted beads. In such patterns, as a rule, the direction of the set of beads and the knitting progress are indicated. They will be opposite.
With this technique you can create whole Christmas tree pictures. Depending on the final size, a base may be needed. For her, both an old faded Christmas decoration, and a ping-pong ball or a surprise ball are suitable.
Balls with a diameter of up to 2.5-3 cm can do without a frame, they will keep their shape due to the density of knitting.
Decoration of balls
The considered methods assume the absence of a ball-frame or its complete concealment from the eyes of observers.
But this is not the only use of beads to create New Year’s beauty. If you have a plain boring ball lying around in your jewelry box, then you can give it a second chance. To do this, it is enough to braid the ball with beads.
As with the creation of a mosaic, the craftswomen have a free hand, because there are many schemes for braiding New Year’s balls with beads. However, due to the sphericity of the object being tied, they mainly resort to various kinds of meshes. These can be solid nets or “capes” with or without pendants.
Consider a simple scheme of braiding a New Year’s ball with beads – a mesh for the entire ball. To create such a bag, you need to take beads of different colors, 2-2.5 m of fishing line or thread, a needle and a braided ball. By choosing 2 colors, focus on the intersection nodes of the grid. With a large number, the color of the tiers will change.
For a two-tone mesh, start with a set of one bead of the main color, fasten it to the fishing line.
Next, alternate 1 knot and 3 main ones until there are 7 beads of the second color on the thread. Complete the set with one bead of the first color and thread the needle through the last knot.
This is what the first row looks like. To get a grid, dial 3 yellow and one blue. Fasten the cell to the third nodal bead of the initial row. Repeat until the end. After that, taking into account the knitted ones, 6 blue beads are typed. Complete the last element: dial 3 main, one nodal and one more yellow.
To start the second row of cells, pass the thread through the blue bead just cast on. Weaving is repeated to a length equal to the diameter of the ball minus the width of the side of the cell. Upon reaching it, the grid is closed by picking up three yellow beads, and as corner beads using the beads of the very first row.
Now tie the top and bottom of the balloon.
Put the mesh on the toy, and on the new working thread, type the beads of the main color. The number of beads is taken from the calculation of the corners along the edge of the grid (about 16-18). Connect them in a ring. To determine the size, you need a good eye, otherwise you will have to sort out the length of the row empirically. Depending on the size of the balls, this can be 10 beads or more.
Pass the resulting chain through the first corner and return the thread to the initial ring through all the beads of the chain. Grab the second bead from the ring, repeat the procedure. This weaving is similar to the needle technique, with the only difference being that the corner bead on the mesh acts as a turning bead, and not in the typesetting row.
The remaining half of the ball is closed in exactly the same way. If desired, you can decorate this part with a pendant, for this you need a faceted bead or a drop.
Hang or tassel last when the last rib is woven.
They collect the desired number of beads, then the final “drop” and return the needle through the strung beads. Fix the suspension so that it is exactly in the center of the ball.This kind of beaded balls look very impressive and, provided that they are made as carefully as possible, they look like factory ones. They can be a great memorable gift and a worthy decoration of the holiday.
How to weave a ball of beads: tools and materials
For a ball of beads you will need:
- beads or beads of any color;
- thread, line or monofilament;
- beaded or regular needle with fine eye;
- scissors.
To work with beads comfortably, you can pour them on a towel or any other non-slippery fabric. For beginners, it is better to start by trying to make a beaded ball of the same size, so that it is easier to give it the desired shape.
And when you learn this technique well, you can try to weave a ball with glass beads, round or faceted beads of different sizes, bicones and so on.
Note that these balls are woven on the basis of 3, 4 and 5 initial beads. Depending on how many beads will be at the base, the appearance of the ball will be very different. And you can use balls of different sizes in the finished product.
We make a light beaded ball on three beads
To make such a ball you need only 6 beads. Therefore, we recommend that you take larger beads, since ordinary beads No. 10 will turn out to be small in size. The diagram below shows step-by-step instructions for making this ball.
Step 1. Take the thread and put 3 beads on it, connect them into a ring, again passing the needle through the 1st lube. Now again go through all 3 beads with a needle to make the ring stronger, and tie a knot.
Step 2. . String 2 more beads on the thread and pass the needle, as shown in the diagram, into beads numbered 1 and 2.
You need to tighten the thread well so that the resulting product resembles a hemisphere.
Step 3. Pass the needle through the last bead, and pass the needle into the 4th bead, and then into the 2nd, 3rd, 5th and 6th. Now again in the 3rd and 5th beads. Tighten the thread well, then you will get an even ball. Next, tie a knot and cut the thread. So that the ends of the thread do not stick out and do not spoil the look of the product, they can be tucked into beads. And to keep the knot from unraveling, you can fix it with superglue or colorless nail polish. As you noticed, making a ball of beads is not so difficult.
Making a decorative ball with 4 beads
If you want to make the ball bigger, you can weave it into 4 beads in the initial circle. To create it, you will need 12 beads and a thread longer than la ball for 3 beads. The scheme of weaving such a ball is quite simple and does not differ much from the previous one:
Step 1. To start weaving, string 4 beads onto the thread and connect them into a ring.
Tie a knot and do not forget to go through all the beads with the needle again for strength.
Step 2. Next, string 3 more beads and tighten the thread so that you get a small wall of the ball, passing the needle through the 1st and 2nd beads, as in the diagram.
Step 3. Now string 2 more beads onto the thread. Having tightened the thread well, you will get a dense hemisphere. Pass the thread through the 5th, 2nd and 3rd beads.
Step 4. Put 2 beads on the thread again, and fasten them by passing the needle through the 8th, 3rd, 4th and 7th beads.
Step 5. Add the last 12th bead, going through the 10th, 4th, 7th, 6th, 9thth, 11th, 12th and again the 6th bead to make a ball. We fix it by tying the thread into a knot, cutting off the ends. Hide the threads in beads and secure the knot with varnish.
We create a popular bead on 5 beads according to the pattern
But the most popular pattern for weaving a beaded ball is a pattern on 5 beads. Although it is more difficult than the previous two, the result is very beautiful and elegant products.
For one such ball you need 30 beads and, of course, more patience and time. The weaving pattern looks like this:
Step 1. Thread 5 beads onto the thread and make a ring out of them. Fasten it according to the same principle as in the 2 previous cases, tying a knot and passing the thread through all the beads.
Step 2. Thread 4 more beads onto the thread and, as shown in the diagram, make a ring out of them, passing the needle through the 1st and 2nd beads.
Step 3. Now, adding 3 beads in the same way, weave the first row of the ball. The diagram shows the sequence of actions very clearly. In total, 20 beads are needed for the first row.
Step 4. Next, move on to the second and last row of the beaded ball. According to the scheme, we start weaving from the 8th bead, to do this, string 3 beads on the thread and to secure them, pass the thread through the 19th, 8th, 7th and 12th beads.
Step 5. In the same way as in the first row, cast on 2 beads to make a full ring, and fasten the bead according to the scheme.
Repeat this step again.
Step 6. Stringing the 30th bead on the thread, fasten it by passing the needle through the 28th, 17th, 20th, 23rd, 22nd, 25th, 27th, 29th-th, 30th and 22nd beads. Tighten the thread well and tie a knot. Hide the ends and secure the knot with varnish.
Beaded Christmas ball. Photo
Beaded bee
Bee weaving is done by parallel weaving. It is best to weave a bee on a fishing line, then the craft will turn out to be soft and more voluminous, but you can of course use thin wire for weaving.
We need beads:
- We start weaving from the antennae, we collect 3 black beads in the middle of the fishing line, with one end of the fishing line we pass back through 2 and 1 beads (needle weaving)
- At the other end of the line we collect one brown bead and 3 black ones, with the end of the line we pass through 2 and 1 black beads.
Next, weave the bee according to the scheme, start from the top, pick up 3 brown beads at one end of the fishing line, go through the same three beads with the other end of the fishing line, then for the two ends of the fishing line, draw the beads to the antennae, then take 4 brown beads and in the same way we do everything as with three beads and so on according to the scheme.
The most difficult thing will probably be to make wings: on one end of the fishing line we collect 1 brown bead and 15 transparent ones, then we stretch the end of the same end of the fishing line into a brown bead, the second wing is done in the same way. on the other end of the fishing line we also string 1 brown and 15 transparent beads, we stretch the end of the fishing line into a brown bead. Well, then everything is according to the scheme. At the end, we tie the ends of the fishing line with a sea knot, and if you want to use the bee as a keychain, then set aside the ends of the fishing line to then attach your bee to the item you want.
As you can see, making a bee from beads is not difficult at all, just one tip: use beads of the same size.
Weaving a net of beads
In order to make any beaded product, and a net of beads is no exception, you should start with the choice of color and structure. Knowledge of the characteristics of the quality of the beads will not interfere here.
When developing a product, first of all we determine its shape and dimensions, design and artistic solution. To do this, it is worth developing a sketch, drawing up a diagram and choosing a mesh weaving technique. After selecting the color scheme of the beads, you can get to work.
Beaded mesh weaving scheme
Products are very beautiful and harmonious, with various color combinations, selected with taste. Since the beads have a rich palette of colors and textures, there will be no difficulty here.
When weaving a net of beads, attention must be paid to uniform thread tension, as this can affect the final result of the work. It is also worth taking care of the smooth edges of the product, and the neat termination of the threads. In order to hide the thread when weaving the mesh, the needle with the thread is passed a second time through the bead both at the beginning and at the end of weaving. So that the thread does not fluff, it is better to process it with glue or wax.
Beaded mesh necklace diagram
A beaded mesh can decorate many different items. It can be tablecloths, dresses, curtains. The necklace woven with mesh looks original. Weaving a net of beads is a flight of fancy. Learn more about how to weave a mesh of beads.
Where is the mesh of beads used?
The usual option is to create bracelets for hands and necklaces for the neck. It is possible to weave bracelets of completely different shades to combine with flowers and under the necessary clothes.
Tips for weaving a mesh of beads
Beginning needlewomen will also need advice from more experienced craftswomen.
So, it is better to weave a mesh of beads on one thread. Because any thread connections will be very visible on the mesh. But after all, working with a long thread is inconvenient. In this case, you need to do this: unwind 3 meters of thread (to get a mesh 45-50 centimeters long). The mesh of beads will need to start weaving from the middle of the thread, while winding the rest on the coil.
And when this piece of thread ends, you should start weaving from the other end of the thread, but in the other direction of the grid.
Another recommendation for those who do not plan to embroider the mesh with stones. In this case, the best option for weaving is a nylon thread folded in half. Double folding is important so that the product does not fall apart if one thread accidentally breaks.
Parallel weaving technology
The peculiarity of the technique is to create short parallel rows, fastened together only at the beginning and end. According to the scheme, a certain amount of beads is strung on the wire. The ends of the wires should pass through the collected beads towards each other. Beading in parallel rows is very convenient for beginners:
- Fast and easy to read circuit;
- even an inexperienced master can follow exactly the pattern;
- it is possible to use different sizes and classes of beads.
You can use the long row weaving technique, however, then you should additionally fasten every few beads to the beads of the previous row.
In the photo of the finished product, it is most often not clear how the beads are fixed – only by the edge or every 2-3 beads, but the formed parallel rows and the relief of the beads are clearly visible. Beginners are recommended to make a flower using parallel weaving. The simplest of them with thin multi-colored leaves require a small amount of material and develop skills.
Preparing and choosing material
Before starting work, it is worth finding all the necessary material for creating beaded Easter eggs. These materials are the same, and their choice does not depend on the preferred technique of working with beads. For this activity you will need:
- Blanks (egg shaped or similar).
- Beads in various colors and preferred sizes.
- Adhesive.
- Beading needles.
- Thread for beads or fishing line.
The blank can be easily found in specialized craft and beading supply stores. Ordinary blanks made of wood or plastic will do.
You can also use the shell of an ordinary egg to make the product. To do this, you need:
- Make small holes (at the ends) and remove all contents.
- Reinforce the remaining shell by covering it with pieces of newspaper or other soft paper.
Knowing this technique well, you can do without the shell. It is just worth making a blank from pieces of soft paper in the required form. For its stability, the base is made flat. To give a beautiful look to the workpiece, the upper layers of the paper are leveled with sandpaper and coated with paint.
Any beads are suitable for work. Czech glass beads are of special quality. In their absence, Chinese will do.
The choice of colors and the size of the beads depends on the chosen pattern and pattern.
Background colors usually choose pastel colors. Suitable white, blue, light pink and other neutral colors. For the significance of the type, the pattern is made from a bright and catchy color palette in all variations.
Beads are sold by weight, not by quantity. You need to know exactly the required weight for the product. Its definition is possible due to the presence of a scheme and a special table.
Threads (filing line) and needles for work are in the same stores where blanks are sold. When choosing a thread, it is worth giving preference to the thinnest and most durable so that they fit under the existing hole in the bead. The needle should also be thin, with a small eye.
Pasting eggs with beads
Beginning needlewomen are sometimes afraid of braiding Easter eggs with beads, the patterns seem very complicated to them. In such cases, you should resort to pasting.
Requires natural eggs, food coloring, salt, vinegar, PVA glue, toothpicks, fishing line, nylon or elastic thread, beads and beads. The eggs are hard-boiled before decorating.
To ensure that the paint lays without problems on the egg, before boiling, they are dipped in vinegar, which is diluted with warm water. Then they are rinsed in cold water and sent to cook for literally 10 minutes.
Before the eggs have cooled down, they should be dipped in the dye, turned over so that all sides are dyed. Then they are placed on a napkin to dry. To create unusual Easter eggs using beads, you need to choose dyes that are not very bright so that the beads do not get lost on the main background. It is better to choose paint of the opposite or simple color.
See also: How to weave an owl from rubber bands on a slingshot, loom or hook
Once the eggs are completely cool and dry, you can start decorating them with beads. To do this, the future pattern must be applied to the shell with a pencil. You can choose a very different theme or take the standard one in the form of ordinary crosses or the letters “XB”.
Glue is applied to the shell along the thinnest lines.
Next, using a toothpick, different beads are glued according to the pattern. The work itself is painstaking and requires perseverance, but the result is worth it.
Using baubles
The second option for decorating eggs for Easter is gluing ready-made baubles made of beads. Baubles can be in one thread, and in several.
The thread of beads will be wound around the egg, which is initially smeared with glue. You can start the pasting process not only from the end, but also from the middle of the egg. The main thing is to firmly fix and glue the ends of the thread.
If the bauble itself is wide, when connected, its diameter must be clearly matched to the diameter of the egg from the widest part. A strip with a ready-made pattern is put on and glued to the shell in the center of the egg. From the created belt to the tapering ends, the egg is pasted over with single beads or single-row threads of beads are glued.
Diamond mesh of beads
The scheme is simple and elegant at the same time. Using this method, you can make a stunning decoration for Easter eggs by placing them in a kind of cocoon. It is easy for a beginner to learn how to braid an egg with beads. The step-by-step master classes described are great helpers.
The first step is to prepare all the necessary materials. Here you will need beads, a needle that can pass through a hole, and a flexible fishing line. Work begins with stringing beads on a fishing line. It is important to take into account that the finished product must completely cover the egg in the widest part. The number of beads strung on the first thread must be a multiple of 6. This will be needed for the symmetry of the finished product. The resulting thread is closed in a ring, stretching the needle with the end of the fishing line into the first bead of the row.
The next step is to string five beads and insert the needle into the sixth bead of the finished row. If everything is done correctly, you should get a small, neat rhombus. Further, according to the same scheme, the rest of the rhombuses are made. Five beads are strung each time, the chain is pulled into every sixth part of the base.
When the first row of the mesh is ready, you can start building it up. Five beads are placed on the fishing line, which are inserted into the center of the previously obtained rhombuses, that is, into the third bead of the coil. In such a simple way, the base thread is pulled together, forming another row of diamonds. Similarly, two more rows should be made.
The next step is to take the workpiece. It can be an empty eggshell or a dummy on which the resulting mesh fragment is put on. Now the product must be narrowed, forming a dome. For this purpose, instead of five beads, you need to take three pieces, still passing the end of the needle into the central bead of the rhombus.
You will need to string everything on a bead on the last rows. Half of the finished mesh should tightly wrap around the egg.
A simpler technique can be used. When forming a dome, three beads are strung on the needle, but the needle is passed not into each rhombus, but through one.
When the dome completely covers the egg on one side, you can start forming the second part. When the diamond-shaped mesh is ready, the fishing line is pulled into a strong knot, cut off, and its tip is hidden between the beads with a needle.
Double-sided weaving method
This technique is great for beginners. To start learning this technique is on the beads of two different colors. One will be used for weaving even rows, and the second for odd rows. The first and second stripes are woven as follows:
- The first two beads are threaded.
- Returns and inserts the needle into the first bead.
- It is necessary to string two beads on the fishing line (as in point 1).
- Pass the needle through the third bead.
- Weave two rows in this way. The first row of beads is connected to each other, and in the second row the beads are held on the first row.
- Pair connection of the first and penultimate bead, the second with the last. Pass the fishing line through the beads of the unpaired row (3-4 pcs.) Pull the thread through the bead of the paired row. Do the same, passing the thread in the 3rd or 4th bead of the odd row on the right side.
Start work on the third row of the product. To do this, you need to string a bead and thread a fishing line into it. Then skip the thread through the last bead and knit. Repeat these steps and carefully work on the canvas according to the existing scheme.
This method is used to create a belt around the thickest part of the egg. The size of one strip is chosen based on the size of the product (height and width).
Usually the size of the belt is in the range of 10 rows. Its length depends on the circumference of the widest part of the egg.
Important nuances
For convenience and a better fit of the fabric, it is worth making the first two rows of the belt, and then putting them on the egg. This will allow you to avoid mistakes with the choice of the size of the canvas, and the density of the fit of the beads will give an excellent appearance to the product. The remaining ends of the girdle must be fastened by tying the remnants of the thread together.
Braiding in the narrowing part of the egg must be started after the belt has been made. To work properly, you need to carefully reduce the number of beads with each new row. For a better fit of the canvas, this should be done evenly, pulling the thread through the same number of beads of the previous row.
If a warp occurs during work or too large gaps between the rows, you must immediately unravel the braid and redo it.
The very last bead, located in the upper center of the egg, is carefully fixed. This is done by tying a thread through it and neighboring beads, which is then tied into a knot. The rest of the thread is cut off, and the ends are hidden under the nearest rows of braid.
Easter egg scheme. Easter eggs from beads! Weaving patterns for beginners
During Easter, boiled chicken eggs are traditionally decorated. They are not only served at the table and given to each other, such a product is used for festive rituals – competitions for strength, washing with decoction and conspiracies for the health of the child. It is believed that it is he who needs to be eaten for breakfast on the Bright Resurrection of Christ. Beaded Easter eggs look special and surprise guests.
Before starting work, it is worth finding all the necessary material for creating beaded Easter eggs.
These materials are the same and their choice does not depend on preferred
beading techniques. For this activity you will need:
- Blanks (egg shaped or similar).
- Beads in various colors and preferred sizes.
- Glue.
- Beading needles.
- Thread for beads or fishing line.
The blank can be easily found in specialty craft supply and beading stores. Regular blanks will do
made of wood or plastic.
You can also use shells to make the product
from a regular egg. To do this, you need:
- Make small holes (at the ends) and remove all contents.
- Reinforce the remaining shell by covering it with pieces of newspaper or other soft paper.
Knowing this technique well, you can do without the shell. It only costs to complete the blank
from pieces of soft paper in the desired shape. For its stability, the base is made flat. To give beautiful view
blank, the top layers of paper are leveled with sandpaper and coated with paint.
Beads are suitable for any work. Beads made of Czech glass are distinguished by special quality
. In their absence, Chinese will do.
The choice of colors and the size of the beads depends on the selected pattern
and diagrams of the drawing.
Background colors usually choose pastel colors. Suitable white, blue, light pink and other neutral colors. For the significance of the species pattern perform
from a bright and catchy color palette in all variations.
Beads are sold by weight, not by quantity. You need to know exactly the required weight for the product. Its definition is possible due to the presence of a scheme and a special table
.
Threads (fishing line) and needles for work are in the same stores where blanks are sold. When choosing a thread, it is worth giving preference to the thinnest and most durable so that they fit under the existing hole in the bead. The needle should also be thin, with a small eye.
Pasting eggs with beads
Novice needlewomen are sometimes afraid of braiding Easter eggs with beads, the patterns seem very complicated to them. In such cases, you should resort to pasting.
Requires natural eggs, food coloring, salt, vinegar, PVA glue, toothpicks, fishing line, nylon or elastic thread, beads and beads. The eggs are hard-boiled before decorating.
To ensure that the paint lays on the egg without problems, before boiling, they are dipped in vinegar, which is diluted with warm water. Then they are rinsed in cold water and sent to cook for literally 10 minutes.
Before the eggs have cooled down, they should be dipped in the dye, turned over so that all sides are dyed. Then they are placed on a napkin to dry. To create unusual Easter eggs using beads, you need to choose dyes that are not very bright so that the beads do not get lost on the main background. It is better to choose paint of the opposite or simple color.
Once the eggs are completely cool and dry, you can start decorating them with beads.
To do this, the future pattern must be applied to the shell with a pencil. You can choose a very different theme or take the standard one in the form of ordinary crosses or the letters “XB”.
Glue is applied to the shell along the thinnest lines. Next, using a toothpick, different beads are glued according to the pattern. The work itself is painstaking and requires perseverance, but the result is worth it.
Use of baubles
The second option for decorating eggs for Easter is gluing ready-made baubles made of beads. Baubles can be in one thread, and in several.
The thread of beads will be wound around the egg, which is initially smeared with glue. You can start the pasting process not only from the end, but also from the middle of the egg. The main thing is to firmly fix and glue the ends of the thread.
If the bauble itself is wide, when connected, its diameter must be clearly matched to the diameter of the egg from the widest part. A strip with a ready-made pattern is put on and glued to the shell in the center of the egg.
From the created belt to the tapering ends, the egg is pasted over with single beads or single-row threads of beads are glued.
Diamond mesh beaded
The scheme is simple and elegant at the same time. Using this method, you can make a stunning decoration for Easter eggs by placing them in a kind of cocoon. It is easy for a beginner to learn how to braid an egg with beads. The step-by-step master classes described are great helpers.
The first step is to prepare all the necessary materials. Here you will need beads, a needle that can pass through a hole, and a flexible fishing line. Work begins with stringing beads on a fishing line. It is important to take into account that the finished product must completely cover the egg in the widest part. The number of beads strung on the first thread must be a multiple of 6. This will be needed for the symmetry of the finished product. The resulting thread is closed in a ring, stretching the needle with the end of the fishing line into the first bead of the row.
The next step is to string five beads and insert the needle into the sixth bead of the finished row. If everything is done correctly, you should get a small, neat rhombus. Further, according to the same scheme, the rest of the rhombuses are made. Five beads are strung each time, the chain is pulled into every sixth part of the base.
When the first row of the mesh is ready, you can start building it up. Five beads are placed on the fishing line, which are inserted into the center of the previously obtained rhombuses, that is, into the third bead of the coil. In such a simple way, the base thread is pulled together, forming another row of diamonds. Similarly, two more rows should be made.
The next step is to take the workpiece. It can be an empty eggshell or a dummy on which the resulting mesh fragment is put on. Now the product must be narrowed, forming a dome. For this purpose, instead of five beads, you need to take three pieces, still passing the end of the needle into the central bead of the rhombus.
You will need to string everything on a bead on the last rows. Half of the finished mesh should tightly wrap around the egg.
A simpler technique can be used. When forming a dome, three beads are strung on the needle, but the needle is passed not into each rhombus, but through one.
When the dome completely covers the egg on one side, you can start forming the second part. When the diamond-shaped mesh is ready, the fishing line is pulled into a strong knot, cut off, and its tip is hidden between the beads with a needle.
Double-sided weaving method
This technique is great for beginners. To start learning this technique is on the beads of two different colors. One will be used for weaving even rows, and the second for odd ones. The first and second stripes are woven as follows:
- The first two beads are threaded.
- Returns and inserts the needle into the first bead.
- It is necessary to string two beads on a fishing line (as in point 1).
- Pass the needle through the third bead.
- Weave two rows in this way. The first row of beads is connected to each other, and in the second row the beads are held on the first row.
- Pair connection of the first and penultimate bead, the second with the last. Pass the fishing line through the beads of the unpaired row (3-4 pcs.) Pull the thread through the bead of the paired row. Do the same, passing the thread in the 3rd or 4th bead of the odd row on the right side.
Start work on the third row of the product. To do this, you need to string a bead and thread a fishing line into it. Then skip the thread through the last bead and knit. Repeat these steps and carefully work on the canvas according to the existing scheme.
This method is used to create a belt around the thickest part of the egg. The size of one strip is chosen based on the size of the product (height and width). Usually the size of the belt is in the range of 10 rows.
Its length depends on the circumference of the widest part of the egg.
Important notes
For convenience and a better fit of the fabric, make the first two rows of the belt, and then put them on the egg. This will allow you to avoid mistakes with the choice of the size of the canvas, and the density of the fit of the beads will give an excellent appearance to the product. The remaining ends of the girdle must be fastened by tying the remnants of the thread together.
Braiding in the narrowing part of the egg must be started after the belt has been made. To work properly, you need to carefully reduce the number of beads with each new row. For a better fit of the canvas, this should be done evenly, pulling the thread through the same number of beads of the previous row.
If a warp occurs during work or too large gaps between the rows, you must immediately unravel the braid and redo it. The very last bead, located in the upper center of the egg, is carefully fixed.
This is done by tying a thread through it and neighboring beads, which is then tied into a knot. The rest of the thread is cut off, and the ends are hidden under the nearest rows of braid.
Mosaic beading
One of the simplest and at the same time interesting methods of weaving with beads is mosaic. The method is suitable for making beautiful decorations for Easter eggs. There is no need to adhere to the scheme, which simplifies the task several times. To work, you need to take a sufficient amount of beads, a needle to it and a fishing line.
To get started, you need to make a small flower, in the center of which there is only one bead, with six identical petals. The second row begins with stringing beads between the flower petals. Here it is appropriate to alternate the colors of the beads so that the rows are even and not confused. In addition, this way the product will look more interesting. Working on the formation of the third row, you should increase the number of beads – you get a cone-shaped mesh.
In this case, two others are placed between the beads. It is advisable to strive to pass the needle into the same bead from which it came out. This will allow you to achieve even turns of the chain.
The next rows are made in the same way. One bead is strung on the needle and the end is drawn into the space between the beads of the third row. In the fifth row, the weaving is expanded and three pieces are strung on the fishing line. This should turn out to be the widest row, since, starting from the next, the ligature must again be narrowed by placing eggs inside the dummies.
To complete the tie, the dummy is placed in the product. It is advisable to use glue at the base so that the mesh sits tightly on the egg and does not move out. The seventh row is made by passing the needle through two turns of the 6th row, taking one piece per needle. In this case, the bead should fall on every third bead of the fifth row. The eighth row is woven by eye, and the beads are taken two or three, depending on the distance to the previous row.
The line is pulled through every second bead of the seventh row.
Rows 9 and 10 are done in the same way, but for 9, two beads are taken, and for the tenth, only one is enough. For more experienced craftsmen, at the end of the 10th row, you can complicate the pattern and weave any motifs into the product. However, even a simple mesh will look decent if beads of different colors were used in its manufacture.
From the center of the egg it is necessary to gradually tighten the mesh, weaving in the same order, but in a mirror-image part. To achieve perfect symmetry, you can focus on the axis, the basis of which was originally set by the six petals of the base flower. Upon completion of the work, the same flower as at the beginning is made with one bead in the middle. A fixing knot is made on the fishing line. The thread is cut, hiding its end inside.
Attention, only TODAY!
Braiding an egg with MK beads.
I’ll tell you a secret, I don’t know how and I don’t like to work according to schemes, and I never create schemes myself.
If you also like to create things in a single copy – this master class is for you.
What do you need?
You can use any form
for egg: wooden blank, plastic egg, etc. The main thing is that the form is strong enough and not too heavy (I prefer wooden blanks).Thread
, you can also use any: monofilament, thread for beads “Fireline”, regular waxed thread (I work with “Fireline”).Beads
we also use the one that is available, moreover, it can be of different sizes and textures. You can also use large beads
. Although I work mainly with Czech beads preciosa No. 10.Where to start?
For work, we select beads of several shades, for beginners, you can take two or three colors that blend well with each other to your taste.
Getting started
from a regular beaded flower: one bead inside, six aroundSecond row
we pass between the beads, you can immediately take the beads of a different color to make it clearerIn the third row
, we immediately need to increase the number of beads, because. expansion of the product is required, so we take two beads at once and pass between the beads of the second rowThroughout the work, it is necessary to ensure that each row is completed, i.e. the needle should return to the bead from which it came out at the beginning of the row and pass through the first (or two or three) of the just completed one.
again we go through one beadIn the fifth row
we continue to expand the product, so we take three beads.We are already beginning to form a pattern, and even in this small detail of the product there may already be several options for the location of the beads. sixth
row again we take two beads, so that the expansion is uniform: we take two, we pass through the three previous rows. Here are two color options for :
Now – a very important point!
Here I propose not to rush, but using glue for beads or rhinestones, stick the “patch” we have obtained on the base of the egg. It must be ensured that it is located strictly in the center of the base. Wooden blanks usually have a small saw cut at the bottom of the egg so that the egg can be set. I think you will appreciate how much more convenient it will be to work later, because. our work will be securely recorded.
I just do what I want with what I have. Same with Easter eggs. I wove the first egg about 20 years ago, developed the weaving technique myself and still use it.
I’m in a rosy mood today. We take mosaic weaving as a basis with the addition and subtraction of beads, using a six-beam pattern. You can make small marks on the blank with a pencil if you plan to create a more complex drawing, although this is not necessary. Sometimes I start work without any preliminary idea at all, not knowing what will come out in the end.
Fourth row
Beaded Easter eggs for beginners and pros
Products made of beads have a number of advantages over others. The beads do not fade, lose color, do not break, do not deform, like products made from paper, fabric or made using paints. The material is inexpensive and has a wide range, both in terms of the size of the beads and in the color palette. It is easy to work with beads, and the result is things comparable to a work of art.
For work you will need the following materials:
Decor – you can use foil, stickers with an Orthodox theme.
Schematic drawing.
Wooden egg blank. They come in different sizes, from 3.5 to 8 cm in diameter.
Beads in several colors.
Silk threads. They can be white, black or close to the color of the beads.
As a guide to work, we offer you patterns for weaving Easter eggs from beads.
Beaded Easter eggs: step-by-step weaving instructions with photo
Consider several options for decorating Easter wooden eggs:
1.
Pasting method. This is the easiest method, suitable for very young or beginner needlewomen. Coat the wood with glue. Before that, it is better to paint it in a color close to the beads. Instead of thread, use fishing line. Stringing beads on a thin fishing line, start wrapping in a spiral from the base of the egg, smearing each turn with glue. Each row can be made in different shades, the main thing is that the Easter craft is bright. After the glue dries, the product can be decorated with ribbons, decorative stones or other elements.
2. Cover technique. The braiding method is named so because the egg turns out to be wrapped in an elegant case. To do this, you need to weave a “belt” in size, approximately 1/3 of a wooden product, try it on a wooden blank and fasten it. In this case, the belt should not hang out, but should sit tightly. Next, you need to braid the top and bottom of the egg. To do this, use the grid technique. The mesh must be weaved openwork, moving towards the top of the head.
With each row, the number of beads should decrease so that the mesh completely wraps around the egg. With this technique, you can depict a pattern or ornament. Use several different colors or several shades of the same color for a smooth transition.
3. Using a sticker. The third method of braiding an Easter egg from beads is presented as a master class:
You can try all three methods and make some decorative decorations for your home, as well as unique handmade gifts. We wish you inspiration and creative success!
Easter eggs occupy a special place among all possible beadwork. Bright and refined, they amaze with jewelry work and beauty of weaving. They want to admire. This is a magnificent handmade Easter gift and at the same time an elegant decoration of the festive table. With them, the tradition of giving colorful eggs for Easter takes on a different meaning. If you braid a testicle every year, then in a few years you can collect a whole author’s collection.
The main thing is to use good schemes and strictly follow the technique. This master class will tell you in detail about braiding eggs with beads using mixed media: mesh + mosaic.
What do you need for work?
– Czech beads of size No. 10 or No. 11,
– needles for beads,
– monofilament or nylon thread to match the beads,
– the base that we will braid (wooden, foam plastic, papier-mâché or even plaster).
Our master class was devoted to only one method of weaving, but you can weave Easter eggs in other techniques. Ndebele, hand weaving and mosaic elements, net weaving and beadwork – almost any technique can be used to create a beautiful braiding of eggs.
Stages of work
The master class consists of two parts:
1. braiding the central part of the egg with beads,
2. braiding the top and bottom of the eggs.
A beautiful floral pattern is located in the central part of the scheme, we choose our favorite colors for it.
We have chosen traditional Easter colors – gold and red and diluted them with a small amount of white beads. We will braid the central part of the eggs using the “mesh” technique, and the rest – using the “mosaic” technique. The rest of the ornament will depend on the pattern on the girdle, so we start with it.
Belt weaving
To make everything clear, the entire master class is shown in detail on graphic diagrams. Figure 1 shows how to start a grid.
Picture 1
1. We collect 32 beads, following the picture, and close the first cell of the grid, going into the twenty-fifth bead.
2. Further to the very top, each time we repeat the same thing: we typed 3 beads on the thread, counted 3 things from the ringlet and went to the fourth.
3. At the top, instead of 3 things, we collect 4 and close the ring again.
We follow the drawing, we adhere to the scheme. We braid in rows, sequentially adding cells to the grid. As we work, we apply it to the workpiece so as not to miss the moment when it is already time to sew the edges together.
For eggs with a height of eight centimeters with a size of Czech beads No. 10, the drawing of the scheme will have to be repeated exactly five times and not more.
This completes the braiding of the central part of the egg, and the master class proceeds to the second stage – sewing up the upper and lower parts with beads.
Mosaic
Mosaic is one of the most common beading techniques, the rows in it are arranged in rows shifted in height relative to each other.
Mosaic successfully dilutes the spectacular ornament of the central part of the egg and gives more freedom to smoothly reduce the length of the row.
The main thing is to follow the sequence, follow the pattern and gradually reduce the number of beads in each subsequent row. In this case, there should be no voids, the braiding should be dense and uniform.
We select the pattern for the top and bottom of the eggs ourselves, it should not be very complicated.
Our master class offers the simplest decor option – thin golden stripes, over which golden and red beads are combined through one, and white beads are located at an equal distance between the golden rows.
That’s the whole simple ornament. But with its help, we smoothly and imperceptibly reduce the rows and, finally, sew them together into a narrow ring at the very top of the egg.
At the bottom, the braiding is almost the same, there is only one difference – at first, several rows are made as a continuation of the mesh, with cells, and then the mosaic is already made. At the end, several white beads are sewn on top of several cells of the grid as a decoration.
The master class on braiding eggs with beads is over. These are the souvenirs we got in the end!
This master class is absolutely universal and involves braiding any objects, not just eggs. For example, using the same technique, using the same patterns, you can make a beautiful planter for a pot or a New Year’s ball for a Christmas tree. Another mesh can be used for weaving.
Beaded Easter eggs are a beautiful souvenir that everyone will love. To make many different eggs using the same technique in which this master class was made, different belt patterns will help you.
Here are three author’s options for you from the Podarkins.
The tradition of painting and painting hard-boiled chicken eggs for Easter dates back to ancient times. Celebrating the day when Jesus Christ was resurrected, Christians decorate the festive table and give each other decorated eggs, perceiving them as a symbol of new life, goodness, grace, prosperity, prosperity. Easter eggs made of beads made by hand can be a wonderful gift for the main Orthodox holiday.
Pasting eggs with beads
Those who have never been beading will have to be patient and learn the craft from the basics. Or choose a simpler option for decorating Easter eggs with beads – the pasting method.
- The second option for decorating Easter eggs with your own hands is gluing ready-made beaded baubles. Baubles can consist of a single thread or complex beaded chains.
Beaded thread in one row is simply wound on the egg, pre-lubricated with glue. You can start pasting both from the end and from the middle of the egg.
The main thing is to fasten and glue the end of the thread well.
If the bauble is wide, when closed, its diameter must exactly match the diameter of the egg at its widest point. A strip with a finished pattern is put on and glued firmly to the shell in the middle of the egg. Further, from the “girdle” to the tapering ends, the egg is pasted over with single beads or long single-row beaded threads are glued.
- A more complicated way to decorate Easter eggs is beadwork.
The technique of braiding eggs with beaded mesh or cloth can be different. The choice of pattern and subject of needlework is limited only by the imagination and skill of the craftswoman. But in any case, such symbolic souvenirs look great, festive and very elegant.
Easy egg braiding pattern for beginners – video tutorial
Material and accessories
Before you start needlework, you need to purchase materials for making beaded Easter eggs. They are the same regardless of the chosen beading technique.
To work on the craft you will need:
- Egg-shaped blanks.
- Beads and beads of different colors and sizes.
- Glue.
- Needles for capping and collecting beads in a pattern.
- Thin nylon threads or fishing line.
As a blank, plastic or wooden blanks are usually used, which are sold in shops for accessories for needlework, embroidery, beading.
To make a beaded Easter egg, you can use a whole shell from a real egg:
- To do this, the contents of a raw egg are blown through tiny holes made in the ends.
- The shell is “strengthened” by gluing it with pieces of soft paper (newspapers, napkins) using the papier-mâché technique.
The blank can be made entirely from papier-mâché, giving it the shape of an egg. For convenience, its base is made flat so that the “egg” is stable. For beauty and aesthetics, the layers of dried paper are leveled with fine-grained sandpaper and coated with acrylic paint.
The technique of weaving a diamond-shaped mesh of beads
A rather simple method of weaving, which can be mastered in a short time. Even a novice needlewoman is capable of braiding an Easter egg with a mesh “in a rhombus”.
Step-by-step instructions:
There is another way to weave tapered mesh. A set of beads continues to be made in 3 pieces, but the needle is threaded through the rhombus, skipping the next one. Braiding the end of the egg, you can not follow the scheme, but connect the beads in random order.
The second part of the egg is braided with a rhombus mesh according to the same principle. Weaving the last bead into the pattern, a fixing knot is made, the thread is cut and hidden.
Double Sided Beading Technique
A method ideal for beginners in beading. This technique – double-sided weaving or hand weaving – is most often chosen even by experienced craftswomen in order to decorate an Easter egg with beads.
Step by step:
The easiest way to learn is with beads in two contrasting colors. One weave even rows, the other – odd. The first 2 rows are woven like this:
The described technology is used to weave a girdle that wraps the widest part of the egg. The size of the strip is determined depending on the height and width of the workpiece. On average, the height of the belt takes 10 rows. The length is equal to the circumference of the workpiece along the widest central part.
Hand weaving technique is not only suitable for decorating Easter eggs. Using a similar scheme, you can create a beautiful decor for any other crafts and souvenirs. For example, make a decorative Easter from beads, which can be used to decorate the interior or presented as a gift to friends, relatives, colleagues.
Mosaic Beading
Mosaic Beading is a very simple method, perfect for beginners. The canvas is woven without a scheme; it is also not necessary to calculate how many beads will go to the entire braid of the egg.
