Goalie equipment size. Ultimate Guide to Goalie Equipment Sizing: Maximize Performance and Protection

How to properly size goalie leg pads, gloves, blockers, and pants. What factors determine the right fit for each piece of equipment. How correct sizing impacts a goaltender’s performance and confidence.

The Importance of Proper Goalie Equipment Sizing

Goaltending is a unique and challenging position that requires specific equipment tailored to each player’s needs. Proper sizing of goalie gear is crucial for optimal performance, protection, and confidence on the ice. This comprehensive guide will explore the key factors in sizing various pieces of goalie equipment and provide expert tips for finding the perfect fit.

Goalie Leg Pad Sizing: Achieving the Ideal Length and Fit

Leg pads are one of the most critical pieces of goalie equipment. The overall length is the primary factor in sizing, which is divided into three key segments:

1. The boot
2. Instep to the knee
3. Knee to top (thigh rise)

To determine the proper leg pad size, follow these steps:

• Measure your skate size for correct boot fit
• Measure from instep to the front center of the kneecap while slightly bent
• Measure from the front center of the kneecap up the thigh to desired height (typically 7-8 inches)

Add these measurements together to estimate the total leg pad size. When fitted correctly, the goalie’s knee should rest directly behind the center knee roll, with the pad securely attached to the skates and properly strapped to the leg.

Custom Pad Sizing Tips

For a truly personalized fit, consider custom pad sizing. Provide your skate size, instep to knee measurement, and desired thigh rise to manufacturers offering custom options. This ensures optimal performance and comfort tailored to your specific body measurements.

Goalie Glove Sizing: Balancing Control and Coverage

While oversized gloves are trendy at all levels, proper sizing is essential for maximum control and effectiveness. How should a goalie glove fit?

The goalie’s fingers should extend to the end of the finger stalls in the inside palm, with no more than 1/4 inch of space at the fingertips. This provides the necessary leverage to close and control the glove effectively. Additionally, the heel of your hand should align with the heel and cuff of the glove to maintain proper balance and protection.

Regular vs. Full Right Catch Gloves

When selecting a catch glove, be aware of the following distinctions:

• Regular Catch Glove: Worn on the left hand
• Full Right Catch Glove: Worn on the right hand

Blocker Sizing: Ensuring Stability and Control

Proper blocker sizing is crucial for maintaining control and maximizing coverage. How do you size a goalie blocker?

The blocker should be fitted based on hand size, with the goalie’s fingers no more than 1/4 inch from the end of the fingers in the palm. If the fingers are too long, the hand tabs securing the blocker may be too large, causing instability and reduced control.

Regular vs. Full Right Blockers

When choosing a blocker, keep in mind:

• Regular Blocker: Worn on the right hand (same side as the goalie stick)
• Full Right Blocker: Worn on the left hand (same side as the goalie stick)

Goalie Pant Sizing: Balancing Protection and Mobility

Properly fitted goalie pants should provide unrestricted movement in the crouch position while minimizing excessive rotation around the waist. How tight should goalie pants be?

The ideal fit allows for full range of motion without being so loose that they impede movement or compromise protection. When trying on goalie pants, simulate game movements to ensure comfort and proper coverage in various positions.

The Impact of Proper Equipment Sizing on Goaltender Confidence

Equipment confidence is a crucial mental aspect of goaltending that significantly affects performance. How does proper sizing contribute to a goaltender’s confidence?

When equipment fits correctly, goaltenders feel secure and protected, allowing them to move freely and react instinctively to shots. Ill-fitting gear can lead to hesitation and uncertainty, negatively impacting reaction times and overall performance.

The Dangers of Improper Sizing

Purchasing equipment that is too large or too small can:

• Limit the product’s ability to perform and protect
• Prevent proper break-in of the equipment
• Increase the risk of injury due to gaps in protection
• Hinder natural movements and reactions

Care and Maintenance of Goalie Equipment

Proper care and maintenance of goalie equipment are essential for longevity and performance. What are the key steps in maintaining goalie gear?

1. Dry equipment thoroughly after each use to prevent mildew and premature wear
2. Inspect gear regularly for any cuts or tears, repairing damage immediately
3. Replace old or worn equipment to ensure maximum protection and performance
4. Avoid treating synthetic materials with silicone or other water repellents

Expert Tips for Purchasing Goalie Equipment

When shopping for goalie gear, consider the following expert recommendations:

• Bring your skates and goal pants when purchasing leg pads to ensure a true fit
• Consult with experienced goaltenders or professional staff for personalized advice
• Consider your playing style and level when selecting equipment models
• Don’t hesitate to try on multiple sizes and brands to find the best fit
• Remember that personal preference plays a role in equipment selection

The Importance of Professional Guidance

If you’re unsure about equipment sizing or selection, don’t hesitate to seek professional assistance. Many retailers specializing in goalie equipment have experienced staff who can provide valuable insights and recommendations tailored to your needs.

Adapting to New Equipment: Breaking In and Adjusting

Once you’ve purchased properly sized goalie equipment, it’s essential to break it in correctly. How long does it take to break in new goalie gear?

The break-in period varies depending on the type of equipment and how frequently it’s used. Generally, allow for several practice sessions and games to fully adapt to new gear. During this time, pay attention to any areas of discomfort or restriction and make necessary adjustments.

Tips for Breaking In New Goalie Equipment

• Wear new gear during off-ice training to begin the break-in process
• Gradually increase wearing time during practices before using in games
• Use proper techniques to soften and shape leg pads and gloves
• Be patient and allow time for your body to adjust to the new equipment

The Evolution of Goalie Equipment: Trends and Innovations

Goalie equipment has evolved significantly over the years, with manufacturers constantly developing new technologies and materials to enhance performance and protection. What are some recent trends in goalie equipment design?

• Lighter, more responsive materials for improved mobility
• Enhanced customization options for a truly personalized fit
• Improved ventilation systems for better temperature regulation
• Advanced impact-absorption technologies for increased protection
• Integration of smart technologies for performance tracking and analysis

Staying informed about these advancements can help goalies make educated decisions when selecting new equipment.

The Psychological Impact of Equipment on Goaltender Performance

Beyond the physical aspects, goalie equipment plays a significant role in a player’s mental game. How does equipment affect a goaltender’s mindset?

Properly fitting, high-quality equipment can boost a goaltender’s confidence, allowing them to focus entirely on their performance rather than worrying about their gear. This mental assurance can lead to improved reaction times, better positioning, and overall enhanced play.

Building a Positive Relationship with Your Equipment

To maximize the psychological benefits of your gear:

• Develop a pre-game routine that includes equipment checks and adjustments
• Visualize successful saves and movements while putting on your gear
• Take pride in the maintenance and care of your equipment
• Embrace your gear as an extension of yourself on the ice

Balancing Cost and Quality in Goalie Equipment Selection

Goalie equipment can be a significant investment, and it’s essential to find the right balance between cost and quality. How can goalies make smart purchasing decisions?

Consider the following factors when evaluating goalie equipment options:

• Your skill level and frequency of play
• The durability and longevity of the equipment
• Warranty and customer support offered by the manufacturer
• Potential for growth (especially important for younger players)
• Resale value of high-quality equipment

While it may be tempting to opt for cheaper options, investing in quality gear that fits properly can lead to better performance and potentially save money in the long run by reducing the need for frequent replacements.

Budget-Friendly Tips for Goalie Equipment

For those on a tight budget, consider these strategies:

• Look for end-of-season sales or clearance events
• Consider gently used equipment from reputable sources
• Prioritize spending on the most critical pieces of equipment
• Explore payment plans or financing options offered by some retailers
• Join goalie-specific forums or groups to find deals and advice

The Role of Equipment in Injury Prevention for Goaltenders

Properly sized and maintained goalie equipment is crucial for injury prevention. How does equipment contribute to a goaltender’s safety on the ice?

Well-fitted gear provides comprehensive coverage and protection, reducing the risk of injuries from high-velocity pucks and collisions. Additionally, equipment that allows for natural movement can help prevent strain and overuse injuries.

Common Injuries and Preventive Measures

To minimize the risk of common goaltender injuries:

• Ensure proper fit of all equipment, especially in high-impact areas
• Regularly inspect and replace worn or damaged gear
• Use appropriate padding and supports for known problem areas
• Incorporate off-ice strength and flexibility training to support on-ice movements
• Stay hydrated and maintain good overall physical condition

Adapting Goalie Equipment to Different Playing Styles

Every goaltender has a unique playing style, and equipment choices can significantly impact their ability to perform effectively. How can goalies select equipment that complements their style?

Consider the following factors when choosing equipment:

• Butterfly vs. stand-up style preferences
• Aggressiveness in challenging shooters
• Reliance on specific save techniques (e.g., paddle down, RVH)
• Puck-handling tendencies
• Personal comfort and flexibility needs

By selecting gear that aligns with your playing style, you can enhance your strengths and minimize limitations on the ice.

Customization Options for Personalized Performance

Many manufacturers offer customization options to tailor equipment to individual needs:

• Adjustable leg channel widths in pads
• Various glove pocket depths and breaks
• Customizable blocker palm positions
• Personalized graphics and color schemes

Exploring these options can help you create a gear setup that feels truly personalized and enhances your performance.

The Future of Goalie Equipment: Emerging Technologies and Trends

As technology continues to advance, the future of goalie equipment looks promising. What innovations can we expect to see in coming years?

• Smart fabrics that adapt to body temperature and movement
• Improved impact-absorption materials for enhanced protection
• Integration of performance tracking sensors for real-time feedback
• 3D-printed custom equipment for perfect fit and performance
• Eco-friendly materials and manufacturing processes

Staying informed about these developments can help goalies make forward-thinking equipment choices and potentially gain a competitive edge.

The Importance of Balancing Innovation with Tradition

While embracing new technologies, it’s crucial to consider:

• League regulations and equipment restrictions
• The balance between performance enhancement and fair play
• Personal comfort and familiarity with equipment
• Long-term durability and reliability of new technologies

By carefully evaluating new innovations alongside tried-and-true equipment designs, goalies can create an optimal gear setup that maximizes both performance and comfort.

Equipment Sizing Information

1. Goalie Leg Pads
2. Goalie Gloves
3. Goalie Blockers
4. Goalie Pants
5. Chest & Arm
6. Goalie Skates
7. Goalie Masks
8. Goalie Sticks

Equipment = Confidence

Goaltending is a unique and challenging position, the most important on the ice. Each goaltender has specific needs because of the way they react or play different situations. In order to play at the top of your game, you must have confidence in your equipment to perform and protect. Equipment confidence is a state of mind, which greatly affects a goaltender’s movements. A goaltender without equipment confidence feels unsafe and hesitates before making a move. Aside from selecting the right model of equipment for the level of play, the fit of the equipment is paramount. Purchasing equipment too large or too small will only limit the products ability to perform and protect. Equipment that does not fit properly will never break in properly.

Care & Maintenance

Once you have selected the proper fitting model of equipment that enhances your style and is suitable to your level of play, you should ensure proper care and maintenance. Drying your equipment after use prevents mildew and excessive and premature wear. No product should be used if damaged. Any cuts or tears should be repaired immediately. Old or worn equipment should be replaced to ensure maximum performance and protection. Finally, do not treat synthetic materials with silicone or other water repellents.

The following fitting guide is to be used as a guideline only and may not reflect your personal preference. If you are unsure about the sizing of the equipment you would like to purchase, please call our professional staff of goaltenders for additional information at 1-888-945-4295.

Goalie Leg Pad Fitting Guide

The key factor with Goal Pad Sizing is the overall length. The length is divided into three segments: (A) The Boot, (B) Instep to the Knee, & (C) Knee to top or thigh rise. The proper length of the goal pad boot is determined by the goalie skate size. The next key area is the instep to knee that determines the shin length. Finally, the knee to top or thigh rise is a personal measurement depending on how much pant and pad overlap the goaltender prefers. A general standard is 7″ to 8″.

Custom Pad Sizing

A. Skate Size: Provide the skate size for proper boot fit
B. Instep to Knee: Measure from instep to the front center of kneecap while the leg is in a slightly bent position
C. Thigh Rise: Measure from front center of kneecap up the thigh to desired height

A + B + C = estimated size of leg pad

If fitted properly, the goalie’s knee should rest directly behind the center knee roll with the pad securely attached to the goal skates and properly strapped on the goaltender’s leg. Generally, this will ensure that the pad breaks (bends) at the knee / shin and ankle as designed for optimal performance. Consumers are advised to bring their skates and goal pants when going to purchase leg pads. By bringing your skates this will provide for a true fit, as you don’t play the game in street shoes, while replicating the actual feel of the pads. Therefore, there are no surprises when the goaltender goes on the ice for the first time.

Goalie Glove Fitting Guide

Although the trend at all levels is to use oversized gloves, the goalie’s fingers should extend out to the end of the finger stalls of the inside palm to ensure a proper fit. However, any more than 1/4″ from the tip of the goaltender’s finger to the end of the finger stalls and the goaltender will not have the proper amount of leverage necessary to close and control the glove. Aside from the lack of control, the glove will also have a tendency to “break back” or fold, which will make the glove difficult to use. The second key factor is that the heel of your hand should line up with the heel and the cuff of the glove. If not, the proper balance between the cuff and the catching portion of the glove may be disturbed, making the glove too cumbersome while sacrificing protection.

Note: ‘Regular’ Catch Glove = Glove goes on the left hand.

Note: ‘Full Right’ Catch Glove = Glove goes on the right hand.

Goalie Blocker Fitting Guide

The blocker should be fitted based on the hand size. The goalie’s fingers should be no more than 1/4″ from the end of the fingers in the palm. If the fingers are too long, chances are the hand tabs that secure to the blocker are too large. This will cause the blocker to wobble, tilt or rotate on the goaltender’s hand, seriously affecting control while limiting coverage.

Note: ‘Regular’ Blocker = Blocker is on the right hand (also side goalie stick is held).

Note: ‘Full Right’ Blocker = Blocker is on the left hand (also side goalie stick is held).

Goalie Pant Fitting Guide

When fitted properly, goal pants should provide unrestricted movement and the crouch position, but should not be so loose that they rotate excessively around the waist. Loosely fitting pants provide superior net coverage in addition to making the goalie look bigger. Goal pants should provide overlapping coverage with the bottom of the chest protector and the tops of the goal pads. You may want to consider using suspenders if the belt isn’t enough to keep the pants from dropping.

Goalie Chest & Arm Protector Fitting Guide

Please note that Youth chest protectors are the smallest (ages 6 to 8). The following measurements will be needed to properly fit a chest protector: Height, Weight, Chest Measurement & Body Type (Slender, Average, Atheltic, Few Extra Pounds).

Goalie Skates Fitting Guide

Ice skate sizing is not necessarily the same as if you were buying a dress shoe or a sneaker. A men’s 9 skate does not equal a men’s 9 shoe. All skates are sized in Canadian sizes; which are equal to 1 1/2 sizes larger in U.S. shoe size (i.e. a men’s U.S. shoe size of 9 is equal to a Canadian size of 7.5). A lot of our customers a say “I could never fit into a 7. 5 shoe!” This is true, however, a 7.5 skate is not a 7.5 shoe. Typically your skate size will be 1 to 1.5 skate sizes down from your shoe size. When you receive your skates, try them on and push your foot forward so that your toes (while flat) barely glance the toe cap. Bend your knee forward and look behind the heel of your foot down the skate. If you can fit a finger behind the heel easily the skates are too big. A finger should be wedged securely between the heel of your foot and the back side of the skate. Another way to find your skate size (not width), is to remove the footbed from the skates and stand on it with your knee slightly bent.

Note: Make sure not to sharpen your skates until you are certain you have the correct size, sharpened skates cannot be returned.

Goalie Mask Fitting Guide

Goalie Masks are sized according to the circumference of the goaltenders head at the forehead. Use a measuring tape to determine the correct circumference along with the sizing guides listed with each mask to find the appropriate mask size.

Goalie Stick Fitting Guide

There are several factors that should play into selecting a goalie stick. The goalie’s height and more importantly, personal preference, should be considered in selecting the correct paddle length. Although there is no direct correlation between the goalie’s height and paddle length, goalies should usually start using a senior sized stick at about 5’5”.

Note: Due to varying individual body types and measurements, the sizing charts and information provided on this website are to be used as guidelines. If you have any questions on sizing, please call us at (888) 945-4295 and speak to our knowledgeable goalie representatives to help you choose the correct size for your equipment.

Rule 303 | Goalkeeper’s Equipment

Rule 303 | Goalkeeper’s Equipment

(a) With the exception of skates and stick, all the equipment worn by the goalkeeper must be constructed solely for the purpose of protecting the head or body, and they must not wear any garment or use any contrivance that would give them undue assistance in keeping goal.

(b) It is compulsory for all goalkeepers to wear helmets and full facemasks. Hanging throat/neck laceration protectors are recommended. No form fitted facemasks shall be permitted.

(c) Gloves – the dimensions of the goalkeeper’s blocker glove shall not exceed 8 inches in width or 15 inches in length. The cuff of the catching glove shall not exceed 8 inches in width. The circumference of the glove shall not exceed 45 inches. The catching portion of the glove (measured from the heel – the point where the cuff meets the glove – to the top of the “T” trap and following the contour of the glove) must not exceed 18 inches.

(Note) Any bar or attachment (cheater bar) between the cuff and the thumb shall only extend from the cuff to the thumb in a straight line. Any additional lacing, webbing or other material attached to the glove shall deem the equipment illegal.

(d) Leg Pads – The leg guards worn by goalkeepers shall not exceed 11 inches in extreme width and 38 inches in length. The boot channel of the goalkeeper pad must be flat or concave in appearance with no additional attachments such as a puck foil. The boot is the bottom of the pad that sits

over the top of the skate. Calf protectors must follow the contour of the calf and ankle and can have a thickness of no greater than 1 ½ inches.

     The knee strap pad is not to exceed 1 ½ inches in thickness and must be fastened to the inner risers and follow the contour of the inner knee.

     All thigh pads must follow the contour of the leg, or be placed under the pant, and the maximum width of the thigh pad across the front of the leg is 10 inches.

(e) Pants – No internal, external or cheater padding is permitted on the pant leg or waist beyond what is required to provide protection (no outside or inside ridges). Abdominal aprons extending down the front of the thighs on the outside of the pants are prohibited.

(f) Chest/Shoulder Protection – No raised ridges are allowed on the front edges or sides of the chest pad, the inside or outside of the arms, or across the shoulders.

     Layering at the elbow is permitted to add protection but not to add stopping area. This layering, both across the front and down the sides to protect the point of the elbow shall not exceed 7 inches.

     Shoulder cap protectors must follow the contour of the shoulder cap without becoming a projection/extension beyond or above the shoulder or shoulder cap. This contoured padding must not be more than 1 inch in thickness beyond the top ridge of the shoulder and shoulder cap.

     On each side, the shoulder clavicle protectors are not to exceed 7 inches in width and their maximum thickness is to be 1 inch. This protection is not to extend or project above or beyond the shoulder or shoulder cap nor extend beyond the armpit. No insert is allowed between the shoulder clavicle protector and the chest pad that would elevate the shoulder clavicle protector.

     If when the goalkeeper assumes the normal crouch position, the shoulder and/or shoulder cap protection is pushed above the contour of the shoulder, the chest pad will be considered illegal.

(g) A minor penalty for an equipment violation shall be assessed to any goalkeeper using illegal equipment in a game.

(Note) When a request for measurement is made by the Captain of a team against any dimensions of goalkeeper equipment, the Referee shall make the necessary measurement immediately.

If the challenge is not sustained, a bench minor penalty for delay of game shall be assessed to the team requesting the measurement.

Goalie shin guard size chart

Hockey shin guards are an indispensable element of the goaltender’s equipment. They protect the goalkeeper’s knee joints, shins and calves from damage. Also, with their help, the goalkeeper blocks the puck, which flies or slides on the ice. Goalkeeper pads should not only protect the goalkeeper’s legs from injury and catch sports equipment flying on target. Such equipment should fit perfectly on the player so that it is convenient for him to perform his main tasks and save the team during the opponent’s attacks.

To make it as easy as possible for you to purchase ammunition, below we have outlined the key points on how to choose goalkeeper hockey pads for goalkeepers of different ages. We examined not only the basic aspects that you should pay attention to, but also indicated the optimal equipment sizes for players of certain age groups and anthropometry.

Features of selecting goalie pads

When choosing hockey pads, you need to focus on the following points:

1. The length of the ridge channel is determined by the size of the goaltender’s skate.
2. The knee must be comfortable. When trying on ammunition, bend your leg slightly. The top of the back of the shield should not press against the back of the thigh or cause other discomfort. With the help of such an elementary action, you will select a model that will have the optimal length from the ridge channel to the patella.
3. As for the area above the knee (on the front side), here the goalkeeper should focus solely on his own comfort. If neither the goalkeeper nor his companion has experience in buying such ammunition, it is better to choose a model in which the overlap between shorts and pads is 18–20 cm.

If you guessed correctly with the size of the pads, they will sit so that the patella inside will rest, and the special roller for protection against injuries will be located at the desired height. There are other indicators that the purchased goalie pads in hockey are of the correct size:

• the ammunition is normally fixed on the leg, but does not affect mobility;
• The top of the outfit is located under the thigh protector of the shorts.

If the size of hockey goalie pads is not correct, the player will face the following problems:

• equipment will rest against the ankle area;
• leg flexion/extension will be difficult;
• it will be inconvenient for the goalkeeper to move around in the purchased ammunition.

In addition, when the size of the goalkeeper’s pads do not match the size of the hockey player, they begin to either squeeze the legs, or vice versa – fidget over them.

Choosing goalie pads according to the style of play

Hockey goalkeepers practice 2 styles of play: butterfly and hybrid. This point should also be taken into account when selecting:

1. Butterfly (or butterfly) – blocking style, for which models with a fairly high rigidity are suitable. Rigidity is determined by the number of kinks: there should be as few of them on the shield as possible. In this case, it is recommended to focus on such manufacturing companies: CCM Premier, Vaughn Ventus, Bauer Supreme.

The

2. Hybrid is a more pliable playstyle that soft models are suitable for. Here the number of breaks does not really matter. To choose the right ammunition, you need to pay attention to the convenience of the goalkeeper. It is best to focus on shields from such manufacturers: CCM Eflex, Warrior RGT.

In principle, you can choose shields to suit your style from any manufacturer (the same Bauer company can produce both soft models for a hybrid and hard ammunition for a butterfly). Basically, you need to look at the kinks and try on the equipment.

Tables of correspondence of the sizes of goalkeeper’s shields

First of all, it is necessary to take into account the fact that the considered type of goalkeeper’s ammunition is divided into 3 groups:

• for children;
• junior;
• adults.

In the case of children’s equipment, manufacturers use the following system of designations of completeness and size:

For juniors, the size chart is as follows:

If we talk about adults, then the size table for them has the following designations:

Calf length in cm

As you can see, the choice of shields depends on their size, rigidity and ease of use. Consider all the factors mentioned and the pucks will not fly past your goalie traps.

Fitting Guide

CUSTOM WAIT TIME Currently 10-12 weeks.

Russian
English

Getting The Right Fit: Brian’s Goal Pads

We see many customers who are unsure of what size to order or that order leg pads to find out they ordered the
incorrect size. Although a sizing guide helps, there are many other factors to consider when determining the
correct size for you and your style in order to maximize comfort and performance.

Here are some factors to consider:

What style of play are you? +

Generally,
a hybrid style goaltender will prefer a smaller pad or at least smaller thigh rise which allows the goalie to be
more mobile and agile in the net. Often, butterfly or ‘blocking’ style goalies will want to get maximum size and
coverage out of their pads; where a taller pad with a larger thigh rise would be desired.

What is the shape of the pad? +

Pad
style and shape play an important role in how the goal pad fits and sits on the leg. For example, the OPTIK
comes in both a FLX and FLY chassis option. The FLX will mimic a double break pad (Like G-NETIk Pro 2) and have
more flex and give throughout the pad. While the FLY will mimic a single or no-break pad (Like SubZero Pro 3)
and will give a straighter, taller feel.

Are you finished growing? +

Growth
plays a pivotal role in pad sizing. Often you can purchase a slightly larger pad if you are not finished growing
because throughout the season you will shift upward into the knee cradle and will help prevent you from
outgrowing a pad too soon. However, if you are done growing, you will want your knee to be the closest to the
middle of the knee block/cradle as the Brian’s goal pads are unlikely to shrink much and will maximize the
performance and features of the pad.

Are you coming from another brand? +

It
is important to know, not all brands fit the same. Brian’s traditionally fits pretty similar to most in the
knee, however we are known to have a bit larger of a thigh rise. For example if you are coming from a +1.5”
thigh in a Vaughn, you likely will only need a +1 in Brian’s.

Ankle to Knee Measurement? +

Measuring
your ankle to the center of your knee is the easiest way to see what size pad will allow your knee to land in
the center of the knee block. However, it is important to remember this wont guarantee whether or not a certain
thigh rise will feel too tall for you.

In-Store Fitting? +

If
at all possible, we recommend that you visit a Certified Brian’s Dealer to be sized correctly by an employee as
well as try on several sizes to ensure you find the right size that you are comfortable with.

Thigh Size? +

Modern
pads generally come with a +1, +1.5, or +2 added thigh rise. Due to the style of play of the modern goaltender,
pads during the last decade have added additional size to the top of the pad to ensure a complete five-hole
closure. For someone with a narrow butterfly, bad hips, or wanting to cover up more net, additional thigh rise
could be desired, however it is important to note that the more material added to the top of the pad could lead
to less control and mobility as well as a heavy pad. Generally, we recommend between a +1 and +2 thigh rise,
but is all on how much you can handle and/or how long your thigh’s are.

Sizing Chart:

Our sizing chart is always a helpful tool. This will find the best general size for you. Also you can measure
your current pad to the chart on the right to see how it compares to our pads. Again, to ensure the very best size
for your custom pad, we recommend trying the pads on in person, with both your skates and pants on.

1

2

STOCK PAD SIZE	ANKLE TO KNEE	THIGH RISE	SKATE SIZE
21″	12″	6.5″	4
23″	13.5″	7″	4
25″	14.5″	7.5″	4
27″ +1	15.5″	9″	5
29″ +1	16″	10″	6
30″ +1	16″	10. 5″	7
31″ +1	16.5″	10.5″	8
32″+1	17″	11″	8
33″+1	17.5″	11″	9
34″+1	18″	11″	10
35″+1	18″	12″	10
36″+1	19″	12″	10
37″+1	19″	13″	10
38″+1	20″	13″	10

STOCK PAD SIZE	A LENGTH	B LENGTH	C LENGTH
21″	9″	7″	5″
23″	10.5″	7.5″	5″
25″	11.5″	8.5″	5″
27″ +1	12. 5″	10″	5.5″
29″ +1	13″	11″	6″
30″ +1	13″	11.5″	6.5″
31″ +1	13.5″	11.5″	7″
32″+1	14″	12″	7″
33″+1	14.5″	12″	7.5″
34″+1	15″	12″	8″
35″+1	15″	13″	8″
36″+1	16″	13″	8″
37″+1	16″	14″	8″
38″+1	17″	14″	8″

A

B

C

	A LENGTH	B LENGTH	C LENGTH
21″	9″	7″	5″
23″	10. 5″	7.5″	5″
25″	11.5″	8.5″	5″
27″ +1	12.5″	10″	5.5″
29″ +1	13″	11″	6″
30″ +1	13″	11.5″	6.5″
31″ +1	13.5″	11.5″	7″
32″+1	14″	12″	7″
33″+1	14.5″	12″	7.5″
34″+1	15″	12″	8″
35″+1	15″	13″	8″
36″+1	16″	13″	8″
37″+1	16″	14″	8″
38″+1	17″	14″	8″

JUNIOR

SIZE	GOALTENDER HEIGHT
SM	4′-4’5″(122cm-130cm)
MED	4’6″-4’11″(141m-150cm)
LG	5′-5’2″(152cm-159cm)
XL	5’2″-5’5″(159cm-166cm) int.

SENIOR

JUNIOR

SENIOR

On domestic product we offer glove palm sizing in standard/senior and Medium/Intermediate.