What are the standard dimensions for a field hockey goal. How can you build your own field hockey goal at home. What materials are needed for constructing a regulation field hockey goal.
Regulation Field Hockey Goal Dimensions
Field hockey goals have specific dimensions that are regulated by international standards. Understanding these measurements is crucial for proper gameplay and equipment setup.
The standard inside dimensions of a field hockey goal are:
- Width: 12 feet (3.66 meters)
- Height: 7 feet (2.14 meters)
- Depth: 47.24 inches (1.2 meters)
Additionally, backboards surrounding the goal measure 20.69 inches (50 cm) in height. A typical field hockey goal weighs around 200 pounds (90 kg).
Why are these dimensions important?
The standardized dimensions ensure fair play across different levels of competition. The width and height create a challenging yet achievable target for players, while the depth provides stability and prevents the ball from easily bouncing out after a shot.
Constructing Your Own Field Hockey Goal
Building a field hockey goal can be an engaging DIY project. While it may not meet official standards, it can be suitable for practice or recreational play. Here’s a basic guide to constructing a simple field hockey goal:
Materials needed:
- Four 4-foot long 2x4s
- Two 8-foot long 2x4s
- Drill
- Saw
- Screws
- Washers
- Nuts
Construction steps:
- Mark out a 6-foot by 4-foot rectangle on the ground for your goal’s footprint.
- Cut the 2x4s to the appropriate lengths based on your markings.
- Attach two 4-foot 2x4s to the 8-foot 2x4s using screws and washers at each joint.
- Repeat the process with the remaining 2x4s to create a rectangular frame.
- Secure all joints with additional screws and washers for stability.
This DIY approach creates a smaller goal than regulation size but can be useful for individual or small group practice.
Field Hockey Pitch Layout and Markings
Understanding the field layout is essential for comprehending how the goal fits into the larger game context. A standard field hockey pitch has specific dimensions and markings:
- Total area: Approximately 5,027 square meters (1.24 acres)
- Length: 91.4 meters (100 yards)
- Width: 55 meters (60 yards)
- Run-off areas: At least 2 meters on the sides, 3 meters at the backline
Key field markings:
- Three main lines drawn 22.85m (25yds) apart along the sidelines
- A 3.66m (4yd) line parallel to the goal at 14.63m (16yd) from the backline
- The striking circle or ‘D’: A semicircle with a 14.63m (16yd) radius from the center of the goal line
These markings define important areas of play, including where goals can be scored from and where certain fouls result in penalties.
The Importance of the Striking Circle
The striking circle, commonly known as the ‘D’, plays a crucial role in field hockey. This D-shaped area in front of each goal has several important functions:
- Scoring zone: Goals can only be scored if the ball was last touched by an attacker within this area
- Penalty corner area: Used for taking penalty corners when certain fouls occur
- Defensive zone: Defenders must be especially vigilant within this area to prevent scoring opportunities
The striking circle’s dimensions are carefully designed to create a balance between offensive opportunity and defensive challenge, adding strategic depth to the game.
Field Hockey Goal Materials and Construction
Professional field hockey goals are built to withstand intense gameplay and varying weather conditions. Here are some key aspects of their construction:
Common materials:
- Aluminum: Lightweight yet durable, often used for the frame
- Steel: Sometimes used for added strength, especially in the base
- Polyethylene or nylon: Used for the net
- Wood or synthetic materials: Used for the backboard
Design features:
- Reinforced corners to maintain shape under impact
- Weather-resistant coatings to prevent rust and degradation
- Quick-release net clips for easy setup and maintenance
- Padded posts and crossbar for player safety
These professional-grade goals are designed to meet international standards and provide consistent performance throughout a season.
The Role of the Goal in Field Hockey Strategy
The field hockey goal is more than just a target; it plays a significant role in shaping team strategies and individual player positioning:
Offensive considerations:
- Creating shooting angles that maximize the goal’s width
- Using the backboard to create rebounding opportunities
- Positioning players to obstruct the goalkeeper’s view
Defensive tactics:
- Zonal marking to cover different sections of the goal
- Positioning to force attackers into less favorable shooting angles
- Utilizing the goal’s depth for clearances and rebounds
Understanding how to use the goal’s dimensions to your advantage can significantly impact a team’s success on both offense and defense.
Comparing Field Hockey Goals to Other Sports
Field hockey goals have unique dimensions compared to goals in other sports. Let’s examine how they stack up:
Field Hockey vs. Soccer
- Field Hockey: 12 feet wide x 7 feet high
- Soccer: 24 feet wide x 8 feet high
Soccer goals are significantly wider but only slightly taller, reflecting the different ball sizes and playing styles of the two sports.
Field Hockey vs. Ice Hockey
- Field Hockey: 12 feet wide x 7 feet high x 4 feet deep
- Ice Hockey: 6 feet wide x 4 feet high x 44 inches deep
Ice hockey goals are much smaller, accommodating the faster pace and confined space of the rink.
Field Hockey vs. Lacrosse
- Field Hockey: 12 feet wide x 7 feet high
- Lacrosse: 6 feet wide x 6 feet high
Lacrosse goals are smaller and square, suited to the aerial nature of the sport and the use of netted sticks.
These comparisons highlight how each sport’s goal dimensions are tailored to its unique characteristics and gameplay dynamics.
Maintenance and Care of Field Hockey Goals
Proper maintenance of field hockey goals is essential for safety, longevity, and optimal performance. Here are some key maintenance practices:
Regular inspections:
- Check for loose bolts or screws
- Inspect the net for tears or wear
- Examine the frame for any signs of bending or damage
Cleaning:
- Remove dirt and debris regularly
- Clean with mild soap and water as needed
- Avoid harsh chemicals that could damage the frame or net
Storage:
- Store indoor if possible when not in use
- Use weather-resistant covers for outdoor storage
- Ensure proper support to prevent warping
By following these maintenance guidelines, you can significantly extend the life of your field hockey goals and ensure they remain safe and effective for play.
Evolution of Field Hockey Goal Design
The design of field hockey goals has evolved over time, reflecting changes in the sport and advancements in materials technology:
Early designs:
- Simple wooden structures with minimal depth
- Rope or twine nets
- Limited standardization across different regions
Modern innovations:
- Introduction of aluminum frames for lighter weight and improved durability
- Development of specialized synthetic nets resistant to UV damage and weathering
- Implementation of safety features like padded posts and rounded edges
- Integration of tension systems for better net positioning and ball retention
These advancements have not only improved the quality of play but also enhanced safety and reduced maintenance requirements for field hockey goals.
The Impact of Goal Design on Gameplay
The specific dimensions and design of field hockey goals significantly influence how the game is played:
Shooting techniques:
- The goal’s height encourages low, powerful shots
- The width requires precise aim and promotes the development of accurate shooting skills
- The backboard allows for rebounding shots, adding complexity to offensive plays
Goalkeeping strategies:
- The goal’s dimensions influence goalkeeper positioning and movement
- The depth of the goal affects how goalkeepers handle rebounds and clearances
- The backboard creates unique challenges for saving high shots
Team tactics:
- The goal’s size and position on the field shape offensive formations
- Defensive strategies are developed around protecting the specific area of the goal
- Set plays, such as penalty corners, are designed with the goal’s dimensions in mind
Understanding these impacts can help players and coaches develop more effective strategies and training regimens.
Safety Considerations for Field Hockey Goals
While field hockey goals are essential for the sport, they also present potential safety hazards that must be addressed:
Structural integrity:
- Regular inspections for loose or damaged parts
- Proper anchoring to prevent tipping
- Replacement of worn or degraded components
Player protection:
- Padding on posts and crossbars to reduce impact injuries
- Smooth surfaces and rounded edges to minimize cuts and scrapes
- Proper net tension to prevent entanglement
Training and awareness:
- Education on proper use and potential risks
- Clear guidelines for moving and setting up goals
- Supervision during practice and games
By prioritizing these safety considerations, teams and facilities can significantly reduce the risk of goal-related injuries in field hockey.
Innovative Features in Modern Field Hockey Goals
Recent advancements have introduced several innovative features to field hockey goals, enhancing their functionality and user-friendliness:
Portable designs:
- Lightweight materials for easy transportation
- Foldable frames for compact storage
- Quick-assembly mechanisms for rapid setup and takedown
Enhanced visibility:
- High-contrast color schemes to improve ball tracking
- Reflective elements for better visibility in low light conditions
- Clear backboards to allow spectator viewing from behind the goal
Technology integration:
- Sensor systems for automatic goal detection
- LED lighting for visual goal confirmation
- Smart nets that can measure shot speed and placement
These innovations not only improve the playing experience but also contribute to more accurate officiating and enhanced spectator engagement.
Choosing the Right Field Hockey Goal for Different Settings
Selecting the appropriate field hockey goal depends on the specific context in which it will be used. Consider the following factors for different settings:
Professional competitions:
- Full-size, regulation-compliant goals
- Durable materials to withstand intense use
- Professional-grade netting and tension systems
School and club teams:
- Regulation size for official matches
- Potentially portable designs for multi-use fields
- Balanced between durability and cost-effectiveness
Recreational use:
- Smaller, more affordable options may be suitable
- Lightweight, easy-to-move designs
- Simplified construction for occasional use
Indoor training:
- Specialized indoor goals with non-marking materials
- Potentially smaller dimensions to fit confined spaces
- Emphasis on portability and storage efficiency
By carefully considering these factors, you can choose a field hockey goal that best meets the needs of your specific playing environment and level of competition.
The Future of Field Hockey Goal Design
As technology and materials science continue to advance, we can anticipate several potential developments in field hockey goal design:
Smart goals:
- Integration of AI for real-time shot analysis
- Augmented reality displays for training and spectator engagement
- Advanced sensor systems for precise goal-line technology
Eco-friendly materials:
- Sustainable and recyclable frame materials
- Biodegradable netting options
- Energy-efficient manufacturing processes
Adaptive designs:
- Goals that can adjust size for different age groups or skill levels
- Modular components for easy customization and replacement
- Integration with digital platforms for remote coaching and analysis
These potential innovations could revolutionize how field hockey is played, coached, and experienced by both players and spectators.
Field hockey goals, while seemingly simple structures, play a crucial role in shaping the sport. From their precise dimensions to the materials used in their construction, every aspect of these goals has been carefully considered to enhance gameplay, ensure safety, and promote fair competition. As the sport continues to evolve, so too will the design and technology incorporated into field hockey goals, promising an exciting future for players and fans alike.
How To Build A Field Hockey Goal – SilverSkateFestival
by Adam
Field hockey is a sport in which two teams of eleven players each compete to get a small, hard ball into their opponent’s goal. The game is played on a grass field, with each team having a goal at each end of the field. To build a field hockey goal, you will need four 4-foot long 2x4s, two 8-foot long 2x4s, a drill, a saw, screws, washers, and nuts. First, mark out a 6-foot by 4-foot rectangle on the ground where you want your goal to be. Then, use the saw to cut the 4-foot 2x4s and 8-foot 2x4s to the lengths you just marked out. Next, take two of the 4-foot 2x4s and attach them to the 8-foot 2x4s using screws and washers at the top and bottom of each joint. Then, do the same with the other two 4-foot 2x4s and the remaining 8-foot 2×4.
You should now have a rectangular frame. To finish the goal, attach the 4-foot 2x4s to the 8-foot 2x4s using screws and washers at the top and bottom of each joint. Your field hockey goal is now complete!
During Field Hockey, you catch the Field Hockey Ball with a Field Hockey Goal. A horizontal barrack connects two upright posts at the top of the rectangular structure, which is made up of two upright posts. Field hockey goals have a standard inside width of 12′ (3.66 m), an inside height of 7′ (2.14 m), and a depth of 47.24 mm (1.2 m). Field hockey, like Ice hockey, is a team sport in which players try to score on their opponents’ goal. A field hockey team consists of ten players and a goalie who uses wooden or carbon fibre sticks to hit a ball into the opposition’s goal. The elevation of the goal front, side, top, back, and goal keeper.
The inside width of a field hockey goal is regulated at 12′ (3.66 m), the height is 7′ (2.14 m), and the depth is 47.24″ (1.2 m). Backboards surrounding the goal measure 20.
69″ (50 cm) in height. The weight of a field hockey goal is typically 200 pounds (90 kg).
What Are The Dimensions Of A Field Hockey Goal?
Credit: www.harrodsport.com
The distance between the goalposts is 12 feet. The bar height from the ground to the bottom is 7 feet. The ground level has a depth of no more than four feet. A minimum of 3 feet of depth must be present at the barrack level.
The International Hockey Federation requires field hockey goals to be 3.66 meters (12 feet) wide, with goalposts not to exceed 50mm (2in) wide. A standard field hockey pitch is approximately 1.24 acres in size, with a total area of 5,027 square meters. To run the distance, you must have at least 2 meters of run-off on either side of the field, and at least 3 meters at the backline. Three main lines are drawn on a field hockey pitch, separated by 22.85m (25yds) along the 91.4m (100yds) sidelines. The pitch has a straight line measuring 3.66m (4yd) – the same width as goalposts – parallel to the goal, at 14.
63m (16yd). Penalty corners are taken when a ball travels beyond the dotted line 5 meters away from the striking circle, and if this line is crossed, the penalty corner is over. In the case of a foul in the ‘D,’ the dotted line guided where free hits should be taken. Many pitches no longer have the dotted line because of the rule change in 2015. When water is added to the pitch, it reduces friction, which improves the movement of the hockey ball.
The primary function of shooting circles is to keep the ball out of bounds while it is being hit by another player. This is accomplished by striking the ball into the shooting circle and then having it bounce off the top of the circle and into the net. Except for the D-shaped striking circle, the majority of the shooting field is devoid of shooting circles. It is located at the center of the backline, 1.8 meters from the goal line, and has a radius of 14.03 meters. The D-shaped strike circle is used to determine the area where the ball must be hit in order to score a goal.
To score, aim for a shot into the D-shaped striking circle, which must bounce off the top of the circle and into the net.
What Is The Length And Width Of Hockey Goal Post?
A hockey goal is 3.66 meters (12 feet) long, 2.14 meters (7 feet) wide, and 1.8 meters (5 feet) high.
Why Hockey Goals Are Important
The goal is an important part of hockey. A safe, secure area for the players to play in and to create excitement and anticipation as the game progresses is one of them.
You can select the appropriate size and shape for your needs by using the variety of sizes and shapes available. A standard goal measures 12 feet wide and 7 feet tall in terms of height. This is 3.66 meters in height x 2.13 meters in width. We are capable of achieving goals in a variety of ways. You can also find posts in a variety of shapes and sizes, making them ideal for any style of wall. The posts are 7.20m apart, and the distance from the lower edge of the bar to the ground is 2.54m.
What Are Field Hockey Goals Made Out Of?
The Championship Field Hockey Goal is constructed of aluminum and has two 2 x 3 inch front posts and two 2 x 2 inch square backstays. All corners of the hockey puck have been tested to international hockey standards.
A field hockey goal is made up of two upright posts that are joined by a horizontal barrack. Goalposts and backboards are painted red on hockey goals, and the front frame is painted red. Originally, the stick was made from bamboo, but it now has wood and fiberglass components. The standard hockey goal measures 12 feet wide and 7 feet tall (around 2.5 meters). The distance is 3.66m x 2.13m. Only if the ball is played into the goal by a player inside the circle, crosses the goal line under the bar, and is scored can the goal be scored. When a player deliberately puts the ball into his own net, the act is referred to as an own goal. The owner of the goal is responsible for the goal regardless of whether it is scored anytime or at settlement.
According to the IHF, left-handed field hockey sticks are prohibited. Because blue turf makes it easier for viewers to see the ball and markings, hockey pitches in the 2012 London Olympics began to make a new appearance. The most popular regions for field hockey are Europe, Africa, Asia, and Australia. In field hockey, there is no such thing as a high ball* call, only a dangerous call.
Field Hockey: A Game Of Strategy And Skill
Field hockey is played on a rectangular playing field that is 82.5 feet long by 50 feet wide and 82.5 feet deep. At the far end of the pitch, there is a goal, and at the halfway point of the pitch, there is a bar. The goal is surrounded by a line that divides the playing surface into two halves. The goalposts are made of wood and have a height of 10 feet and a width of 6 feet. There is a three-foot-high barbaric with a 25-foot-high roof that can be found 2.5 feet from the ground.
Practice Field Hockey Goal
Credit: www.
goals4sports.com
A practice field hockey goal is a great way to improve your skills and technique. By setting up a goal in your backyard or local park, you can work on your shooting, passing, and ball control. You can also use the goal to practice your defensive skills, such as stick tackling and body positioning.
Field Hockey Goal Dimensions
The dimensions of a field hockey goal are 3.66 meters wide and 2.14 meters high. There is also a semi-circle marked on the field in front of the goal, with a radius of 1 meter.
The standard NHL dimensions for hockey goal posts are 6 x 4 feet. The net’s opening measures 72 inches wide and 48 inches tall (or 120 cm) in height. The goal is 40 inches (or 110 centimeters) long, 40 inches (or 110 centimeters) wide, and 40 inches (or 110 centimeters) deep in terms of depth. Smaller hockey goals can be used by youth hockey or junior hockey leagues, measuring 60 inches (width), 44 inches (height), and 24 inches (depth).
The goal of hockey was originally formed by arranging rocks in certain ways. When the sport was invented, it was initially outfitted with a crossbar to increase goal stability. After the pucks had been caught, officials installed a net to catch them at the barbar and side posts. In the future, many people believe that the dimensions of the post should be enlarged to make it easier for them to reach their goals.
Field Hockey Ball
Field hockey balls are typically made of plastic, with a smooth surface for easy passing. They are smaller and lighter than a soccer ball, making them easier to control for players of all ages and skill levels.
Field Hockey Goal buy at Sport-Thieme.com
Guarantee 3 years
0049 5357 181 503 Customer service
43165 product ratings from our customers
Returns guarantee 100 days
product details
Particularly stable hockey goal
Complies with international regulations
Without wheels
| Version | Price ( Each ) | Delivery date | Quantity ( Each ) |
|---|---|---|---|
Without wheels W0-621142701 | from 2 each € 1763.87 | Leaves warehouse on Wed. 19.07. | |
With wheels W0-621142714 | Leaves warehouse on Wed. 19.07. |
org/Product” data-variant-data=”{"variantNumber":"1142701","price":1889.92}”>
org/Offer”>
Accessories
W0-621142701 (Without wheels)
Field Hockey Goal Net
Pair € 168.06
- Strong aluminium construction
- Complies with international regulations
- With strong boards made from plywood
- Certified by TÜV Austria
Product description
Field hockey goal: 3.66×2.14 m, complies with international regulations
Especially sturdy field hockey goal made of high-quality aluminium tubing.
- Crossbar and posts comply with international regulations
- Made of sturdy 75×50-mm aluminium tubing
- Welded base frame made of solid aluminium U-shaped and angled tubing
- Bar and posts are stove-enamelled
- Reinforced net brackets made of 40×3-mm aluminium tubing
- Panels are made of hollow-chambered tailboards and the hollow chambers feature a wooden core
- Net must be ordered separately
- Net attachment: net hooks
- 45 net hooks included
- Weight: 85 kg
Dimensions:
- W×H: 3.
66×2.14 m - Depth, bottom: 1.20 m
- Depth, top: 0.90 m
- Panel height: 460 mm
66×2.14 mAvailable designs:
- Without transport castors
- With wide transport castors (1 goal requires 2 castors)
Delivery information
- The goods will be delivered to the kerbside only.
Certificates
| certificate number | approved by | valid for |
|---|---|---|
| ZSTS/APZE/2004E | TÜV AUSTRIA | 1142701 |
Product rating
Only customers who have bought the item from us and have received a review invitation can write product reviews.
As the author of a review, you help other customers learn more about the product and its use.
As a reader of a review, it can help you decide if it is the right product for you.
No product reviews available yet.
Hockey nets for professionals and amateurs. What are the types?
Modern ice hockey is a team sport native to Canada. Initially, it was in this country that hockey rapidly gained its popularity. The goal of each team is to score as many goals as possible. By the way, before the gates were of two vertical posts. It wasn’t until 1900 that hockey nets began to be used. What contributed to this? It happened that during the game it was not always possible to see whether the puck hit the goal or not. Because of this, disputes often arose on the ice. But thanks to the suggestion of the fisherman Francis Nel Nonu, the first net appeared on the gate. Of course, she was fishing. After that, they began to install a special grid for hockey. What are the types of networks? Which ones are better for professionals and which ones for amateurs? How to choose the right hockey goal nets? Let’s find out about it.
First, let’s take a closer look at what types of hockey nets are.
Hockey nets. What are the types?
As a rule, ice hockey is a rather aggressive game. That is why very often the puck flies around the court at high speed. In order for hockey players not to lose sight of it, and spectators not to get injured, it is important to install hockey nets. It is worth noting that they are of different kinds. They have their pros and cons. Let’s take it in order:
- For gate . Such a net delays the puck and fixes the results of the goals. It also protects spectators from unexpected injuries. The protective mesh is made of durable materials: capron, polypropylene or nylon. When choosing a material, it is important to remember that capron and nylon will be the most durable. Products from such raw materials will not tear even from mass blows with a puck. In turn, polypropylene is more resistant to temperature extremes.
- Canned. This goalie net is used as a second level of protection. It is installed in order to reduce the speed of the flying puck. As a rule, it is mounted in the opening of the gate, in the area of the upper bar. It is worth noting that they make it from durable white threads. By the way, they have two types of weaving: knotted and without knots. If you decide to buy knotted weaving, it is important to remember that such a product, unlike without knotted weaving, will stretch and sag over time. This is their disadvantage.
- Protective. A protective net is placed along the entire border of the ice rink. Thus, the puck does not fly out of the court during the match. In turn, this protects spectators from accidental injury. By the way, the advantage is that it can be quickly installed before the start of the game and removed after the match.
It is installed in order to reduce the speed of the flying puck. As a rule, it is mounted in the opening of the gate, in the area of the upper bar. It is worth noting that they make it from durable white threads. By the way, they have two types of weaving: knotted and without knots. If you decide to buy knotted weaving, it is important to remember that such a product, unlike without knotted weaving, will stretch and sag over time. This is their disadvantage.Now that we know the pros and cons of different types of nets, it is important to know how they differ for professionals and amateurs. Let’s talk about it!
For professionals.
- Thread thickness – from 3 to 5 mm.
- The best cell size for such games is 40*40 mm.
- Use mesh weaving without knots. It is strong and will not weaken with repeated hits with the puck.
For amateurs.
- Optimum thread thickness – from 2 to 3 mm.
- In children’s and amateur hockey, the mesh size is 30*30 mm.
- A knotted product can be installed. Compared to professionals, amateurs do not have such strong throwing power. This means that weaving will not stretch so quickly.
So, it is obvious that hockey equipment is very necessary. Therefore, it is important to choose the right option for you. By the way, in the ANDRAUS online store you can get acquainted with a large assortment of such nets. What benefits do they have? Let’s find out about it together.
Hockey nets from
Trade House “ANDRAUS” – advantages
As you know, today there are certain requirements for these products.
In our trading house you can buy nets made according to all standards. Let’s take a look at their benefits:
- Strong products. Nets are made of durable material – kapron. They do not tear even with strong and numerous blows with the puck.
- Wear resistant materials. They serve several seasons, despite temperature changes and high humidity. They don’t wear out.
- Various thread thicknesses. Sizes available: 2 mm, 2.2 mm, 2.6 mm, 3 mm, 4 mm, 5 mm.
If you have any questions about hockey nets, our experts will be happy to answer them. If necessary, they will help you place an order.
Related Products
Ice Hockey / Astrasport Size Chart
SKATE SIZE CHART
ADULTS (SR)
| 6 | 6.5 | 7 | 7. 5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | |
| Insole (cm) | 25.1 | 25.5 | 26 | 26.4 | 26.8 | 27.2 | 27.7 | 28.1 | 28.5 | 28.9 | 29.4 | 29.8 | 30.2 |
| Shoe size (UK) | 6.5 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 12.5 |
| Russia | 39.5 | 40 | 41 | 41.5 | 42 | 43 | 43.5 | 44 | 44.5 | 45 | 46 | 46. 5 | 47 |
| CCM/REEBOK | 6 | 6.5 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | — | 10.5 | 11.5 | — | — |
JUNIOR (JR)
| BAUER | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | — |
| Insole (cm) | 21 | 21.4 | 21.8 | 22.2 | 22.6 | 23.1 | 23.5 | 23.9 | 24.3 | 24.7 | — |
| Shoe size (UK) | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | — | — |
| Russia | 32.5 | 33 | 34 | 34. 5 | 35 | 35.5 | 36.5 | 37 | 37.5 | 38 | 38.5 |
| CCM/REEBOK | — | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 4.5 | 5.0 | — | 5.5 |
BAUER HELMET SIZE
(head circumference in cm)
| YTH | XS (JR) | S | M | L | XL | |
| RE-AKT 100 | —- | —- | 52-56 | 56-59.5 | 59.5-64 | —- |
| RE-AKT | —- | 51-55.5 | 53.5-57 | 56-59.5 | 59.5-64 | —- |
| IMS 11.0 | —- | 50-54 | 52-56 | 55-59 | 58-63 | —- |
IMS 9. 0 | —- | —- | 53.5-57 | 56-59.5 | 59.5-64 | —- |
| IMS 7.0 | —- | 50-54 | 52-56 | 55-59 | 58-63 | —- |
| 7500 | —- | —- | 52-57 | 55-60 | 57-62 | —- |
| 5100 | —- | 49-54 | 52-57 | 55-60 | 58-63 | 60-65 |
| 4500 | —- | 51-54 | 53-57 | 56-59 | 59-63 | 60-65 |
| IMS 5.0 | —- | —- | 52-57 | 54-59 | 56-61 | —- |
| RE-AKT 100 Yth | 49-54 | —- | —- | —- | —- | —- |
| PRODIGY | 48-53.5 | —- | —- | —- | —- | —- |
| Lil’ Sport | 48-52 | —- | —- | —- | —- | —- |
BAUER PROTECTION GRID
| YOUTH | JUNIOR | SENIOR | ||||||||||||
| XS | S | M | L | XS | S | M | L | XL | S | M | L | XL | XXL | |
| Age (years) | 3-6 | 4-7 | 5-8 | 6-9 | 7-10 | 8-11 | 9-12 | 11-12 | 12-14 | 14+ | 14+ | 15+ | 15+ | 15+ |
| Weight (kg) | 16-20 | 18-27 | 20-29 | 23-32 | 25-36 | 27-41 | 32-45 | 36-50 | 41-54 | 54-73 | 64-82 | 73-91 | 82-100 | 91+ |
| Height (m) | 0. 91-1.16 | 0.98-1.24 | 1.09-1.32 | 1.14-1.4 | 1.24-1.4 | 1.3-1.42 | 1.4-1.52 | 1.5-1.63 | 1.6-1.72 | 1.65-1.75 | 1.7-1.8 | 1.75-1.85 | 1.8-1.9 | 1.85-1.98 |
Bib (bust in cm) | 53-64 | 56-66 | 58-69 | 61-71 | —- | 66-76 | 71-81 | 76-86 | —- | 91-102 | 97-107 | 102-112 | 107-117 | 112+ |
| Elbows (cm) | 17-19 | 18-20 | 19-22 | 20-23 | —- | 23-28 | —- | 25-30 | —- | 30-33 | 33-36 | 36-38 | —- | —- |
| Gloves (inch) | —- | 7-8 | —- | 8-9 | —- | 9-11 | 10-11 | 11-12 | —- | 12-13 | 13-14 | 14-15 | —- | —- |
Shorts (waist in cm) | 51-56 | 51-56 | 53-58 | 53-58 | 56-58 | 56-61 | 61-66 | 66-71 | 71-76 | 76-86 | 81-91 | 86-97 | 91-102 | 97-107 |
| Guards (inch) | —- | 6-7 | 7-8 | 8-9 | —- | 9-11 | 10-11 | 10-12 | —- | 12-13 | 13-14 | 14-15 | 15-16 | 16-17 |
BAUER HELMET
| Model | Circle heads in cm |
| CONCEPT S/M | 55-58 |
| CONCEPT M/L | 56-59. 5 |
| NME 10/8 FIT 1 | 53-57 |
| NME 10/8 FIT 2 | 55-58 |
| NME 10/8 FIT 3 | 57-61 |
| NME 5/3 SR | 56-59.5 |
| NME 5/3 JR | 53-57 |
| NME 3 YTH | 48.3-53 |
| PROFILE 960 SR | 56-59 |
| PROFILE 950 SR | 56-59.5 |
| PROFILE 940 SR | 56-59.5 |
| PROFILE 940 JR | 53-57 |
| NME STREET YTH | 48.3-56 |
GOALKEEPER BIB
| MODEL | SIZE | VOLUME CHEST (cm) |
| SENIOR | XL | 185-196 |
| L | 178-183 | |
| M | 167-176 | |
| S | 160-165 | |
| INTERMEDIATE | L | 155-160 |
| M | 150-155 | |
| S | 142-150 | |
| JUNIOR | L | 142-150 |
| M | 132-140 | |
| S | 122-130 | |
| XS | 114-122 | |
| YOUTH | L/XL | 117-124 |
| S/M | 109-117 |
BAUER GOALKEEPER SHORTS
| MODEL | SIZE | VOLUME WAIST (cm) |
| SENIOR | XXL | 96-106 |
| XL | 91-101 | |
| L | 86-96 | |
| M | 81-91 | |
| S | 76-86 | |
| INTERMEDIATE | L | 76-81 |
| M | 71-76 | |
| S | 66-71 | |
| JUNIOR | L | 71-76 |
| M | 66-71 | |
| S | 61-66 | |
| YOUTH | L/XL | 56-61 |
| S/M | 51-56 |
GOALIE SHIELD
SIZE (inch) | 21 | 23 | 24-25 | 26 | 28 | 30 | 32 | 33-34 | 34-35 |
GROWTH (cm) | <120 | 130 | 135 | 145 | 155 | 165 | 175 | 180 | >180 |
BAUER CLOTHING
MEN’S
| XS | S | M | L | XL | XXL | XXXL | |
| CHEST (cm) | 89-91 | 94-97 | 99-102 | 104-109 | 112-117 | 119-125 | 127-135 |
| WAIST (cm) | 69-71 | 74-76 | 79-84 | 86-89 | 91-94 | 97-102 | 104-112 |
| HIPS (cm) | 86-89 | 91-94 | 97-99 | 104-107 | 109-112 | 114-119 | 122-130 |
| HEIGHT (cm) | 155-165 | 165-175 | 175-180 | 180-185 | 185-196 | 191-196 | 193-198 |
WOMEN
| XXS | XS | S | M | L | XL | |
| CHEST (cm) | 71-76 | 76-81 | 81-86 | 89-94 | 97-102 | 104-109 |
| WAIST (cm) | 53-58 | 58-64 | 64-66 | 69-74 | 76-81 | 84-89 |
| HIPS (cm) | 79-84 | 84-89 | 89-94 | 94-99 | 102-107 | 109-114 |
| HEIGHT (cm) | 147-158 | 152-163 | 155-165 | 157-168 | 160-170 | 163-173 |
YOUTH
| XXS | XS | S | M | L | XL | |
| CHEST (cm) | 56-58 | 61-66 | 66-74 | 74-81 | 81-88 | 88-90 |
| WAIST (cm) | 53-56 | 57-60 | 60-62 | 62-65 | 65-70 | 70-75 |
| HIPS (cm) | 58-61 | 62-67 | 67-72 | 72-78 | 78-85 | 85-90 |
| HEIGHT (cm) | 99-112 | 114-127 | 127-140 | 140-150 | 150-163 | 163-168 |
BASECAPS
| 54. |  9 55.8 | 56.8 | 57.7 | 58.7 | 59.6 | 60.6 | 61.5 | 62.5 | 63.5 | |
| NE 39THIRTY | Small/Medium | |||||||||
Medium/Large | ||||||||||
Large/X-Large | ||||||||||
| NE 9FIFTY | OSFM | |||||||||
| NE 920/940 | OSFM | |||||||||
| NE C2 Snap Back | OSFM | |||||||||
BAUER UNDERWEAR
MEN’S
| XS | S | M | L | XL | XXL | XXXL | |
| CHEST (cm) | 89-91 | 94-97 | 99-102 | 104-109 | 112-117 | 119-125 | 127-135 |
| WAIST (cm) | 69-71 | 74-76 | 79-84 | 86-89 | 91-94 | 97-102 | 104-112 |
| HIPS (cm) | 86-89 | 91-94 | 97-99 | 104-107 | 109-112 | 114-119 | 122-130 |
| HEIGHT (cm) | 155-165 | 165-175 | 175-180 | 180-185 | 185-196 | 191-196 | 193-198 |
WOMEN
| XXS | XS | S | M | L | XL | |
| CHEST (cm) | 71-76 | 76-81 | 81-86 | 89-94 | 97-102 | 104-109 |
| WAIST (cm) | 53-58 | 58-64 | 64-66 | 69-74 | 76-81 | 84-89 |
| HIPS (cm) | 79-84 | 84-89 | 89-94 | 94-99 | 102-107 | 109-114 |
| HEIGHT (cm) | 147-158 | 152-163 | 155-165 | 157-168 | 160-170 | 163-173 |
YOUTH
| XXS | XS | S | M | L | XL | |
| CHEST (cm) | 56-58 | 61-66 | 66-74 | 74-81 | 81-88 | 88-90 |
| WAIST (cm) | 53-56 | 57-60 | 60-62 | 62-65 | 65-70 | 70-75 |
| HIPS (cm) | 58-61 | 62-67 | 67-72 | 72-78 | 78-85 | 85-90 |
| HEIGHT (cm) | 99-112 | 114-127 | 127-140 | 140-150 | 150-163 | 163-168 |
SOCKS (GOLF) for skates
| BAUER Sock size | XS | S | M | L | XL |
| BAUER Skate size | 10 YTH – 1. Related Stories |
