How to mold a Sisu mouthguard at home. What materials are needed for a custom fit. Why are Sisu guards superior to traditional mouthguards. How to properly sanitize and prepare for the molding process. What steps ensure a perfect fit for your teeth.

The Revolution of Sisu Mouthguards: Thin, Protective, and Comfortable

Gone are the days of bulky, uncomfortable mouthguards that hinder breathing and speech during sports activities. Sisu mouthguards have emerged as a game-changer in dental protection, offering a barely-there feel without compromising on safety. These ultra-thin guards, measuring a mere 2 to 3 millimeters in thickness, are ideal for a wide range of contact sports, including MMA, boxing, football, and hockey.

The secret behind Sisu’s remarkable protection lies in its innovative design and material composition. By integrating a robust copolymer into a permeable mesh structure, Sisu has created a mouthguard that molds to your teeth with unprecedented precision. This unique construction allows for natural breathing and speech, eliminating the notorious “mouth full of marbles” effect associated with traditional guards.

Key Benefits of Sisu Mouthguards:

• Ultra-thin design (2-3mm) for enhanced comfort
• Superior protection through advanced copolymer technology
• Permeable mesh for improved breathability and speech
• Custom molding for a perfect fit
• Stylish color options for personal expression

Unlike conventional boil-and-bite guards that rely on a single layer of plastic, Sisu’s integrated copolymer mesh dissipates impact forces more effectively. This innovative approach not only reduces bulk but also allows saliva to pass through, preventing the accumulation of bacteria-laden moisture. As a result, Sisu guards help combat unpleasant odors, plaque buildup, and potential cavity formation.

For those who value both protection and style, Sisu offers a range of attractive colors and designs. Whether you prefer a sleek black, bold red, or even purple with sparkles, there’s a Sisu guard to match your personality and flair.

Essential Materials for Molding Your Sisu Mouthguard

Creating a custom-fit Sisu mouthguard at home is a straightforward process that requires minimal equipment. Here’s a comprehensive list of materials you’ll need:

1. Sisu mouthguard (your chosen model and color)
2. A pot or bowl suitable for boiling water
3. Clean water for boiling and rinsing
4. Tongs for safely handling the hot mouthguard
5. Scissors for trimming excess material (if necessary)
6. A mirror to aid in proper positioning during molding

With these simple items, you’ll be fully equipped to create a professional-grade, custom-fitted mouthguard in the comfort of your own home. The Sisu kit provides everything essential for achieving a perfect fit in just minutes, making the process accessible to athletes of all levels.

Preparing Your Workspace: Sanitation and Setup

Before diving into the molding process, it’s crucial to properly prepare your workspace and materials. This preparation ensures a hygienic environment and optimal conditions for creating your custom mouthguard.

Inspection and Initial Fitting

Begin by carefully inspecting your Sisu guard for any defects or irregularities. Perform a quick test fit to familiarize yourself with its general positioning in your mouth. This preliminary check will help you anticipate any potential adjustments needed during the molding process.

Sanitization Protocol

Thorough sanitization is paramount to prevent the introduction of harmful bacteria during the molding process. Follow these steps to ensure a clean working environment:

• Sanitize all tools (scissors, tongs) that will come into contact with the mouthguard
• Use alcohol or antibacterial soap for effective disinfection
• Wash your hands thoroughly with soap and warm water
• Rinse your mouth with clean water to remove any food particles or excess saliva

Remove any dental appliances, such as retainers or temporary crowns, as well as any oral jewelry that could interfere with the molding process. This ensures direct contact between the Sisu material and your teeth surfaces, crucial for achieving a perfect fit.

The Art of Boiling: Preparing Your Sisu for Molding

The boiling process is a critical step in softening the Sisu guard’s copolymer material, allowing it to mold perfectly to your teeth. Here’s how to execute this step with precision:

Boiling Technique

1. Fill a pot with enough water to fully submerge the mouthguard
2. Bring the water to a rolling boil
3. Using tongs, carefully lower the Sisu guard into the boiling water
4. Allow the guard to boil for approximately 30 seconds

Cooling Period

After boiling, remove the guard from the water using tongs and allow it to cool for 10-20 seconds. The goal is to achieve a temperature where the guard remains pliable enough to mold but is not too hot to place in your mouth comfortably. This brief cooling period is crucial for safe and effective molding.

Can you reuse the boiling water for multiple attempts? Yes, you can use the same water for multiple attempts if needed. However, ensure the water remains clean and at a rolling boil for each attempt to maintain hygiene and proper softening of the material.

Perfecting the Molding Process: Step-by-Step Guide

With your Sisu guard prepared and your mouth clean, you’re ready to begin the molding process. Follow these steps carefully to achieve a custom fit that provides optimal protection and comfort.

Initial Positioning

Start by placing the slightly cooled Sisu guard over your upper teeth. Ensure it’s centered properly, with the material draping evenly over both sides of your dental arch. This initial positioning is crucial for achieving a symmetrical and effective fit.

Re-softening and Biting Down

1. Quickly dip the positioned guard back into the hot water for 2-3 seconds to re-soften the material
2. Immediately place the guard back over your upper teeth
3. Bite down firmly, applying even pressure across your entire dental arch
4. Maintain this pressure to ensure the guard molds to every contour of your teeth and gums

How long should you maintain pressure on the guard? Aim to keep firm, consistent pressure for about 30 seconds to a minute. This duration allows the material to cool and set in its new, custom-fitted shape.

Vacuum Forming Technique

While maintaining bite pressure, employ a vacuum forming technique to eliminate air pockets and excess water:

• Suck out any air and water trapped between the guard and your teeth
• Continue this suction action until you feel the guard hardening against your teeth
• This process ensures a snug, bubble-free fit that maximizes protection

Tongue Pressure for Gum Fit

To perfect the fit along your gumline, use your tongue to apply targeted pressure:

1. Press your tongue firmly against the inside of the guard
2. Move your tongue along the edges, pushing the material outward toward your gums
3. Focus on creating a seamless transition between the guard and your gumline

This technique ensures the edges of the guard blend smoothly with your gums, preventing irritation and enhancing overall comfort.

Fine-Tuning Your Sisu: Trimming and Adjustments

After the initial molding process, you may find that some minor adjustments are necessary to achieve the perfect fit. Here’s how to fine-tune your Sisu mouthguard for optimal comfort and protection:

Assessing the Fit

Before making any adjustments, thoroughly assess the fit of your newly molded Sisu guard:

• Check for any areas that feel too tight or loose
• Ensure the guard covers all necessary teeth without extending too far back
• Verify that you can breathe and speak comfortably

Trimming Excess Material

If you notice any excess material that causes discomfort or interferes with speech or breathing, follow these steps to trim it:

1. Use clean, sharp scissors to carefully cut away small amounts of excess material
2. Focus on areas that extend too far back or rub against your gums
3. Make small, incremental cuts to avoid removing too much material
4. Smooth any rough edges with a nail file or emery board

Is it possible to trim too much material? Yes, it’s crucial to be conservative when trimming. Remove only small amounts at a time, as you can always cut more but can’t add material back once removed.

Re-molding for Minor Adjustments

If the overall fit needs improvement, you can re-mold specific areas:

• Heat only the section that needs adjustment using hot (not boiling) water
• Quickly reposition the guard and apply pressure to the heated area
• Use your fingers or tongue to reshape the softened material as needed

This targeted re-molding allows for precise adjustments without altering the entire guard.

Maintaining Your Custom Sisu Mouthguard

Proper care and maintenance of your Sisu mouthguard are essential for ensuring its longevity and continued effectiveness. Follow these guidelines to keep your guard in top condition:

Cleaning Routine

Establish a regular cleaning routine to prevent bacterial growth and maintain hygiene:

1. Rinse the guard thoroughly with cool water after each use
2. Use a soft-bristled toothbrush to gently scrub the guard, removing any debris
3. Apply a small amount of mild, non-abrasive soap if needed
4. Rinse again to remove all soap residue
5. Allow the guard to air dry completely before storage

How often should you deep clean your Sisu guard? Aim for a thorough cleaning at least once a week, or more frequently if you use it daily or during intense activities.

Storage Best Practices

Proper storage is crucial for maintaining the shape and cleanliness of your Sisu guard:

• Store the guard in its original case or a ventilated container
• Keep it in a cool, dry place away from direct sunlight
• Avoid leaving the guard in hot cars or other high-temperature environments
• Ensure the guard is completely dry before storing to prevent mold growth

Regular Inspections

Perform regular inspections of your Sisu mouthguard to catch any issues early:

1. Check for signs of wear, cracks, or thinning material
2. Assess the fit periodically, especially if you’ve undergone dental work
3. Look for any discoloration or unusual odors that may indicate bacterial growth
4. Replace the guard if you notice significant wear or damage

By following these maintenance practices, you can ensure that your custom-molded Sisu mouthguard continues to provide optimal protection and comfort throughout its lifespan.

Troubleshooting Common Sisu Molding Issues

Even with careful adherence to the molding instructions, you might encounter some challenges. Here’s how to address common issues that may arise during the Sisu mouthguard molding process:

Uneven Fit or Thickness

If you notice that your guard feels thicker on one side or unevenly distributed:

• Re-heat the entire guard and start the molding process again
• Pay extra attention to applying even pressure across all teeth
• Use your tongue to distribute the material evenly while it’s still pliable

Guard Doesn’t Cover All Teeth

For cases where the guard doesn’t extend far enough back:

1. Re-heat the guard, focusing on the rear portions
2. When re-inserting, push the guard further back before biting down
3. Use your fingers to gently stretch the material over your back molars

Is it normal for the guard not to cover wisdom teeth? Yes, Sisu guards are typically designed to cover up to the second molars. Coverage of wisdom teeth isn’t usually necessary for adequate protection.

Difficulty Breathing or Speaking

If you find it challenging to breathe or speak clearly with the guard in place:

• Check if the guard extends too far back on the roof of your mouth
• Trim small amounts from the rear edges if necessary
• Ensure you’ve created enough space by sucking out air during the molding process

Guard Feels Loose

For a guard that doesn’t feel secure:

1. Verify that you’ve heated the guard sufficiently before molding
2. Re-mold, focusing on applying firm, consistent pressure
3. Use the suction technique more vigorously to create a tighter fit

Gum Irritation

If you experience discomfort along your gumline:

• Carefully trim any excess material that extends onto your gums
• Use a nail file to smooth any sharp edges
• Consider re-molding, paying extra attention to creating a smooth transition at the gumline

By addressing these common issues, you can ensure that your Sisu mouthguard provides the perfect balance of protection and comfort for your specific dental structure.

Introduce sisu mouthguards and their benefits over bulky alternatives

Tired of wearing a bulky, uncomfortable mouthguard that makes it hard to breathe and talk during sports? It’s time to switch to a sisu mouthguard for a barely-there feel that still protects your pearly whites. Sisu guards are ultra-thin – we’re talking 2 to 3 millimeters thin – but don’t sacrifice protection. These innovative guards are perfect for contact sports like MMA, boxing, football, hockey, and more.

So what makes sisu mouthguards so thin yet protective? It’s the unique combination of materials. Sisu integrates a strong copolymer into its permeable mesh design. This allows the guard to mold to your teeth like a second skin. The result is a barely noticeable fit that lets you breathe and speak naturally. No more talking like you have a mouth full of marbles!

Unlike bulky boil-and-bite guards that use a single layer of plastic, sisu integrates the copolymer directly into the mesh. This eliminates thickness while still dissipating impact forces. The mesh also allows saliva to pass through, eliminating the pooling of bacteria-laden saliva. This combination helps prevent yucky odors, plaque buildup, and cavities.

Plus, sisu guards come in stylish colors and designs – say goodbye to the boring clear or basic black mouthguard. Express your unique style while protecting your teeth. Whether you choose a sleek black, bold red, or purple with sparkles, your personality can shine through.

List the materials you’ll need to mold your own sisu guard

Molding your own custom sisu mouthguard is easy with a few handy supplies:

• Sisu mouthguard
• A pot or bowl for boiling water
• Water
• Tongs for handling the hot mouthguard
• Scissors for trimming excess material
• Mirror for seeing your mouth while molding

That’s it! The basic sisu mouthguard kit provides everything you need for a custom fit in just minutes.

Prepare your mouthguard molding kit and sanitization

Before molding, inspect your sisu guard to ensure no defects. Give it a test fit to see the general positioning. Next, get your pot of water boiling – use enough water to fully submerge the mouthguard. You’ll also want to sanitize your scissors, tongs, and anything else touching the guard before molding. Either soak in alcohol or antibacterial soap.

Now wash your hands thoroughly and rinse out your mouth. Remove any retainers, jewelry, or dental work that could interfere with the molding process. You want to eliminate anything that will prevent the sisu material from direct contact with your teeth surfaces.

Boil water for molding and allow to cool slightly

As the water reaches a rolling boil, use tongs to fully submerge the sisu guard. Boil for around 30 seconds to soften the copolymer material so it perfectly molds to your teeth.

Next, remove the guard from the water and allow to cool for about 10-20 seconds. You want the mouthguard to still be warm and pliable enough to mold.

Remove retainers, jewelry, etc and rinse mouth before molding

Just before you start molding, do a final rinse of your mouth with clean water. Swish it around your teeth to wash away any food debris or saliva. Your teeth surfaces need to be completely clean for the guard to adhere properly.

Also ensure you’ve removed any dental work, retainers, or jewelry that could impede the molding process. The sisu material needs direct contact with your teeth.

Dip sisu guard in hot water for fitting to upper teeth

Okay, you’re all prepped and ready to mold! Start by slipping the sisu mouthguard over your upper teeth. Make sure it’s centered and the material drapes evenly over both sides.

Next, dip the guard back into the hot water for just a couple seconds. This re-softens the copolymer so when you bite down, it perfectly takes the impression of your upper teeth.

Bite down firmly on the guard, pressing it to your teeth

After the quick re-dip, pop the warm guard back over your upper teeth. Bite down firmly, pressing the pliable material against your teeth, gums, and roof of your mouth.

Keep your jaw clenched down with constant pressure. You want to squeeze the guard into all the nooks and crannies between your teeth.

Suck out air and water while biting down to mold guard

While biting down, suck out any air and water trapped between the guard and your teeth. This vacuum-forming technique removes air bubbles so the material meshes seamlessly with your bite.

Keep sucking out air and water until you feel the guard hardening against your teeth.

Use tongue to press guard firmly to teeth and gums

Next, use your tongue to press and smooth the mouthguard material firmly around your gumline. Push outward along your teeth to get a snug fit against the gums.

This ensures the edges blend seamlessly for maximum comfort. No more chafed gums from a bulky mouthguard edge!

Hold mold in place for 3-5 minutes as it sets in place

Now comes the hard part – keeping still! Hold the mouthguard firmly in place, biting down to apply constant pressure. Avoid talking or moving your jaw.

Keep light pressure for 3-5 minutes while the copolymer sets against your teeth. This ensures the material hardens into an accurate customized mold.

Trim any excess material from the guard after molded

Once fully hardened, carefully remove the mouthguard. Inspect for any uneven edges or excess material. Use clean scissors to neatly trim any areas that need adjustment.

Try the guard back on to ensure a comfortable, seamless fit. Trim and adjust as needed until you achieve the perfect mold.

Repeat molding process for lower teeth if desired

For maximum protection with a sisu guard, you can repeat the same molding process for your lower teeth. This takes an impression of your full bite.

Simply reboil the guard, allow to cool slightly, and then mold over your lower teeth following the same steps.

Allow guard to fully set overnight before first use

Once you complete the molding, set the sisu guard aside overnight before wearing it for the first time. This allows the materials to fully cure and harden into your custom mold.

In the morning, you’ll have a custom sisu guard ready for game day that fits like a second skin!

Care instructions for cleaning and storing your custom sisu guard

Caring for your molded sisu mouthguard is easy. Rinse after each use with cold water. Occasionally use an antimicrobial soap to wash away bacteria and prevent odors.

Store the guard in a firm case when not in use to retain its shape. Don’t leave it exposed or toss it loosely in your gym bag.

With proper care, your custom sisu mouthguard will provide seasons of ultra-thin, breathable protection!

Explain what makes sisu guards ultra thin and easy to talk and breathe in

Sisu guards have revolutionized the mouthguard game with their crazy thin yet protective design. So how do they pull off such slim guards that allow you to talk and breathe naturally? It’s all about the innovative material.

Most mouthguards use a single layer of bulky plastic that’s heavy on the mouth. Sisu integrates a strong polyethylene copolymer into its lightweight mesh instead. This creates a matrix that’s permeable but still protects your teeth.

By diffusing the copolymer directly into the mesh pattern, sisu eliminates any thick plastic layers. This allows the material to mold as a second skin around your teeth with just 2-3 millimeters of thickness.

The permeable mesh also allows saliva to pass through rather than pooling inside your mouth. This prevents that awful bacteria and plaque buildup that causes stinky mouthguard breath!

And unlike thick, chunky plastic guards that feel like a brick in your mouth, the mesh allows for easy breathing, talking, and drinking. You can keep your mouthguard in during timeouts to stay protected.

Sisu also integrates bite pads with impact-absorbing gel into the guard. Strategically placed pads cushion blows while the strengthened mesh prevents cracking or chipping.

This hybrid design means slim comfort without sacrificing crucial protection. All those crushing hits on the field will disperse through the guard rather than damaging your teeth and gums.

Sisu pulls off these game-changing slim guards thanks to the materials science behind its design. This innovative combo of permeable mesh and copolymer is a total mouthguard game-changer!

List the materials you’ll need to mold your own sisu guard

Molding your own custom sisu mouthguard is a cinch with a few essential supplies:

• Sisu mouthguard
• Pot or bowl for boiling water
• Water for boiling
• Tongs to handle the hot guard
• Scissors for trimming excess
• Mirror to see your mouth during molding

With those few handy items, you’ll be ready to create a custom sisu guard in minutes!

Prepare your mouthguard molding kit and sanitization

To start, inspect your sisu guard for any defects before molding. Give it a test fit to get an idea of sizing and placement in your mouth.

Next, bring water to a boil in a pot or bowl big enough to submerge the guard. You’ll also want to sanitize your scissors, tongs, and other supplies. Either soak in alcohol or use antibacterial soap.

Now, wash your hands thoroughly and rinse out your mouth. Remove any dental work, retainers, or jewelry that could get in the way during molding. Eliminate anything blocking direct tooth contact.

Boil water for molding and allow to cool slightly

Once your water reaches a rolling boil, use tongs to submerge the sisu guard completely. Boil for about 30 seconds to soften the copolymer material for a flawless mold.

Remove the guard and allow to cool for 10-20 seconds. You want it still warm and pliable enough to take an impression of your teeth.

Remove retainers, jewelry, etc and rinse mouth before molding

Right before molding, give your mouth a final rinse with clean water. Swish it around your teeth to remove any food or saliva residue.

Your teeth surfaces must be squeaky clean for the guard to adhere properly. Also ensure you’ve removed any dental work or jewelry obstructing the mold.

Dip sisu guard in hot water for fitting to upper teeth

Ready to mold! First, slide the sisu guard over your upper teeth. Center it so the material extends evenly over both sides.

Quickly dip the guard back into the hot water for a couple seconds – just enough to re-soften the copolymer before biting down.

Bite down firmly on the guard, pressing it to your teeth

Next, pop the warm guard back over your upper teeth and bite down firmly. Press the pliable material against your teeth, gums, and roof of your mouth.

Apply constant pressure, squeezing the guard into all the crevices between your teeth for a flawless impression.

Suck out air and water while biting down to mold guard

While biting down, suck out any trapped air and water between the guard and your teeth. This vacuum forming eliminates air bubbles for a tight seal.

Keep sucking until you feel the material hardening tightly against your bite.

Use tongue to press guard firmly to teeth and gums

Use your tongue to smooth the guard material around your gumline, pressing outward along your teeth. This gets a super snug fit against your gums.

No more chafed, sore gums from bulky guard edges! The sisu mold blends seamlessly for comfort.

Hold mold in place for 3-5 minutes as it sets in place

Here comes the hard (but important) part – holding completely still while the mold sets! Keep biting down with light, constant pressure for 3-5 minutes.

This allows the copolymer to harden into an accurate custom mold around your teeth.

Trim any excess material from the guard after molded

Once fully hardened, carefully remove the guard. Inspect for any uneven edges or excess material. Use clean scissors to neatly trim as needed.

Try the guard back on and continue trimming until you achieve a comfortable, seamless fit.

Repeat molding process for lower teeth if desired

For maximum protection, repeat the molding steps to get an impression of your lower teeth too. Just reboil and remold the guard on your lower teeth.

This gives you a custom mold of your full bite.

Allow guard to fully set overnight before first use

After molding, set aside the guard overnight before wearing it for the first time. This allows the materials to fully cure and harden into your customized mold.

Come morning, you’ll have a custom sisu guard ready for the big game!

Care instructions for cleaning and storing your custom sisu guard

Caring for your sisu guard is a breeze. Rinse with cold water after each use and occasionally wash with antimicrobial soap.

Store in a firm case when not wearing to maintain the mold shape. Don’t toss it loose in your gym bag.

With proper care, your custom sisu guard will provide seasons of slim, breathable protection!

List the materials you’ll need to mold your own sisu guard

Molding a custom sisu mouthguard is super easy with just a few handy supplies. Here’s what you’ll need to DIY your own slim, comfortable guard in no time:

• Sisu mouthguard – This provides the innovative copolymer material that molds to your teeth.
• A pot or bowl for boiling water – You’ll use this to heat and soften the mouthguard for molding. Pick a size big enough to submerge the guard.
• Water – You’ll need enough water to boil and fully cover the mouthguard for molding.
• Tongs – Useful for grabbing the hot mouthguard out of the boiling water.
• Scissors – To trim any excess material after you mold the guard.
• Mirror – Lets you see inside your mouth while you bite down to mold.

With those few simple items, you’ll have everything needed to create a custom fitted sisu guard in just minutes. No special kits or equipment required!

Prepare your mouthguard molding kit and sanitization

To begin, inspect your sisu guard closely for any defects before molding. Give it a test fit in your mouth to get an idea of sizing and placement.

Next, bring your pot of water to a boil – you need enough to fully submerge the guard. You’ll also want to sanitize any tools like scissors, tongs, etc. Either soak in rubbing alcohol or wash with antibacterial soap.

Now wash your hands thoroughly and rinse out your mouth. Remove any dental work, retainers, jewelry that could interfere with the molding process.

Boil water for molding and allow to cool slightly

Once your pot of water reaches a rolling boil, use your sanitized tongs to fully submerge the sisu guard. Let boil for around 30 seconds which softens the copolymer material for molding.

Remove the guard and let cool for 10-20 seconds until still warm and pliable but not too hot for your mouth.

Remove retainers, jewelry, etc and rinse mouth before molding

Right before you start molding, give your mouth one final rinse with clean water. Swish it around your teeth to remove any food particles or saliva.

Your teeth surfaces need to be completely clean for the mouthguard to adhere properly. Also ensure you’ve removed any dental work or jewelry obstructing the mold.

Dip sisu guard in hot water for fitting to upper teeth

Ready to mold! First, slide the sisu material over your upper teeth. Center it so the guard is even on both sides.

Quickly dip the guard back into the hot water for a couple seconds – just enough to re-soften before biting down.

Bite down firmly on the guard, pressing it to your teeth

Next, pop the warm guard back over your upper teeth and bite down firmly. Press the pliable material against your teeth, gums, and roof of your mouth.

Keep constant pressure, squeezing the material into all the nooks of your teeth for a flawless impression.

Suck out air and water while biting down to mold guard

While biting down, suck out any trapped air and water between the guard and teeth. This vacuum forming gives you a tight seal.

Keep sucking until you feel the material hardening tightly against your bite.

Use tongue to press guard firmly to teeth and gums

Use your tongue to smooth the mouthguard material around your gumline, pressing outward along your teeth.

This ensures a super snug fit against your gums for maximum comfort. No more chafed gums!

Hold mold in place for 3-5 minutes as it sets in place

Now comes the hard (but important) part – holding completely still while the mold sets! Keep biting down with light, constant pressure for 3-5 minutes.

This allows the copolymer to fully harden into a custom mold around your teeth.

Trim any excess material from the guard after molded

Once fully hardened, carefully remove the guard. Inspect for any uneven edges or excess material. Use clean scissors to neatly trim as needed.

Try the guard back on and continue trimming until you achieve a comfortable, seamless fit.

Repeat molding process for lower teeth if desired

For maximum protection, repeat the molding process for your lower teeth too. Simply reboil and remold the guard on your bottom teeth.

This gives you a custom mold of your full bite.

Allow guard to fully set overnight before first use

After you finish the molding, set aside the sisu guard overnight before wearing it for the first time. This allows the materials to fully cure and harden into your custom mold.

Come morning, you’ll have a custom sisu guard ready for game day!

Care instructions for cleaning and storing your custom sisu guard

Caring for your molded sisu mouthguard is a piece of cake. Rinse with cold water after each use. Occasionally wash with antimicrobial soap to prevent odors.

Store the guard in a firm case when not wearing to maintain its shape. Don’t toss it loose in your gym bag.

With proper care, your custom sisu guard will provide seasons of slim, breathable protection!

Prepare your mouthguard molding kit and sanitization

Before you start molding your sisu guard, take some time to prep your materials and work area. Proper preparation ensures you create a clean, customized fit.

First, inspect your sisu mouthguard closely for any defects or flaws before molding. Give it a test fit to get an idea of sizing and placement in your mouth.

Next, sanitize any tools you’ll use like tongs, scissors, etc. You can soak them in rubbing alcohol or use antibacterial soap. This kills germs for a hygienic molding process.

Now bring your water to a boil in a pot or bowl big enough to fully submerge the sisu guard. You’ll need enough water to completely cover it for molding.

While waiting for the water to boil, wash your hands thoroughly with soap and water. You’ll be putting fingers in your mouth, so clean hands are a must!

Also, rinse out your mouth with water and remove any dental work, retainers, or jewelry. Eliminate anything that will block the mouthguard material from making direct contact with your teeth surfaces.

You want to prep a clean slate in your mouth for the guard to adhere properly. Scrub your teeth with a toothbrush and floss to remove any food particles or plaque that could impede molding.

Set up your work area with your prepped tools, boiled water, and sanitized scissors nearby. Have a mirror on hand to see inside your mouth while molding.

With your materials prepped and sanitized, you’re ready for a successful sisu mouthguard molding experience!

Boil water for molding and allow to cool slightly

Once your pot of water reaches a rolling boil, use your sanitized tongs to fully submerge the sisu guard. Let boil for around 30 seconds which softens the copolymer material for molding.

Remove the guard and let cool for 10-20 seconds until still warm and pliable but not too hot for your mouth.

Remove retainers, jewelry, etc and rinse mouth before molding

Right before you start molding, give your mouth one final rinse with clean water. Swish it around your teeth to remove any food particles or saliva.

Your teeth surfaces need to be completely clean for the mouthguard to adhere properly. Also ensure you’ve removed any dental work or jewelry obstructing the mold.

Dip sisu guard in hot water for fitting to upper teeth

Ready to mold! First, slide the sisu material over your upper teeth. Center it so the guard is even on both sides.

Quickly dip the guard back into the hot water for a couple seconds – just enough to re-soften before biting down.

Bite down firmly on the guard, pressing it to your teeth

Next, pop the warm guard back over your upper teeth and bite down firmly. Press the pliable material against your teeth, gums, and roof of your mouth.

Keep constant pressure, squeezing the material into all the nooks of your teeth for a flawless impression.

Suck out air and water while biting down to mold guard

While biting down, suck out any trapped air and water between the guard and teeth. This vacuum forming gives you a tight seal.

Keep sucking until you feel the material hardening tightly against your bite.

Use tongue to press guard firmly to teeth and gums

Use your tongue to smooth the mouthguard material around your gumline, pressing outward along your teeth.

This ensures a super snug fit against your gums for maximum comfort. No more chafed gums!

Hold mold in place for 3-5 minutes as it sets in place

Now comes the hard (but important) part – holding completely still while the mold sets! Keep biting down with light, constant pressure for 3-5 minutes.

This allows the copolymer to fully harden into a custom mold around your teeth.

Trim any excess material from the guard after molded

Once fully hardened, carefully remove the guard. Inspect for any uneven edges or excess material. Use clean scissors to neatly trim as needed.

Try the guard back on and continue trimming until you achieve a comfortable, seamless fit.

Repeat molding process for lower teeth if desired

For maximum protection, repeat the molding process for your lower teeth too. Simply reboil and remold the guard on your bottom teeth.

This gives you a custom mold of your full bite.

Allow guard to fully set overnight before first use

After you finish the molding, set aside the sisu guard overnight before wearing it for the first time. This allows the materials to fully cure and harden into your custom mold.

Come morning, you’ll have a custom sisu guard ready for game day!

Care instructions for cleaning and storing your custom sisu guard

Caring for your molded sisu mouthguard is a piece of cake. Rinse with cold water after each use. Occasionally wash with antimicrobial soap to prevent odors.

Store the guard in a firm case when not wearing to maintain its shape. Don’t toss it loose in your gym bag.

With proper care, your custom sisu guard will provide seasons of slim, breathable protection!

Boil water for molding and allow to cool slightly

A key step in DIY molding your sisu guard is heating the material to the ideal temperature. Boiling water is the perfect way to soften the copolymer for a pliable, customized fit.

You’ll want a pot or bowl big enough to fully submerge the mouthguard in water. Bring the water to a rolling boil on the stove or in the microwave.

Once boiling, use your sanitized tongs to completely dip the sisu guard in the hot water. Let it boil for around 30 seconds – this softens the material so it can conform precisely to your teeth.

Next, remove the guard from the water and let it cool for 10-20 seconds. At this point, it should still be warm and pliable but cool enough to go in your mouth safely.

The goal is to achieve the “goldilocks zone” temperature that’s not too hot but still warm enough to mold. If you need to fine tune, quickly dip the guard back in the hot water for a few seconds to reheat as needed.

With the perfect pliable temperature, you’re ready to bite down and achieve a flawless custom mold!

Remove retainers, jewelry, etc and rinse mouth before molding

Right before you start molding, give your mouth one final rinse with clean water. Swish it around your teeth to remove any food particles or saliva.

Your teeth surfaces need to be completely clean for the mouthguard to adhere properly. Also ensure you’ve removed any dental work or jewelry obstructing the mold.

Dip sisu guard in hot water for fitting to upper teeth

Ready to mold! First, slide the sisu material over your upper teeth. Center it so the guard is even on both sides.

Quickly dip the guard back into the hot water for a couple seconds – just enough to re-soften before biting down.

Bite down firmly on the guard, pressing it to your teeth

Next, pop the warm guard back over your upper teeth and bite down firmly. Press the pliable material against your teeth, gums, and roof of your mouth.

Keep constant pressure, squeezing the material into all the nooks of your teeth for a flawless impression.

Suck out air and water while biting down to mold guard

While biting down, suck out any trapped air and water between the guard and teeth. This vacuum forming gives you a tight seal.

Keep sucking until you feel the material hardening tightly against your bite.

Use tongue to press guard firmly to teeth and gums

Use your tongue to smooth the mouthguard material around your gumline, pressing outward along your teeth.

This ensures a super snug fit against your gums for maximum comfort. No more chafed gums!

Hold mold in place for 3-5 minutes as it sets in place

Now comes the hard (but important) part – holding completely still while the mold sets! Keep biting down with light, constant pressure for 3-5 minutes.

This allows the copolymer to fully harden into a custom mold around your teeth.

Trim any excess material from the guard after molded

Once fully hardened, carefully remove the guard. Inspect for any uneven edges or excess material. Use clean scissors to neatly trim as needed.

Try the guard back on and continue trimming until you achieve a comfortable, seamless fit.

Repeat molding process for lower teeth if desired

For maximum protection, repeat the molding process for your lower teeth too. Simply reboil and remold the guard on your bottom teeth.

This gives you a custom mold of your full bite.

Allow guard to fully set overnight before first use

After you finish the molding, set aside the sisu guard overnight before wearing it for the first time. This allows the materials to fully cure and harden into your custom mold.

Come morning, you’ll have a custom sisu guard ready for game day!

Care instructions for cleaning and storing your custom sisu guard

Caring for your molded sisu mouthguard is a piece of cake. Rinse with cold water after each use. Occasionally wash with antimicrobial soap to prevent odors.

Store the guard in a firm case when not wearing to maintain its shape. Don’t toss it loose in your gym bag.

With proper care, your custom sisu guard will provide seasons of slim, breathable protection!

Remove retainers, jewelry, etc and rinse mouth before molding

Right before you start molding your sisu guard, take a moment to prep your mouth. This ensures the material molds smoothly and accurately to your teeth.

First, give your mouth a thorough rinse with clean water. Swish it vigorously around your teeth to dislodge any food particles or saliva. You want squeaky clean teeth for the molding process.

Use your tongue to check for any rough spots or plaque buildup. If needed, scrub your teeth with a toothbrush and floss to remove debris. No crumbs or sticky spots!

You also want to remove any dental work like retainers or braces that could block the mouthguard from making flush contact with your teeth surfaces. Same goes for any jewelry in your tongue, lip, etc.

Eliminate anything that will impede the molding material from directly touching your teeth and gums. This ensures an accurate, customized fit.

Finally, avoid eating, drinking, or smoking right before molding. You want zero residue in your mouth interfering with the impression process.

With a rinsed mouth free of any obstructions, you’re ready to mold your sisu guard for a perfect fit!

Dip sisu guard in hot water for fitting to upper teeth

Ready to mold! First, slide the sisu material over your upper teeth. Center it so the guard is even on both sides.

Quickly dip the guard back into the hot water for a couple seconds – just enough to re-soften before biting down.

Bite down firmly on the guard, pressing it to your teeth

Next, pop the warm guard back over your upper teeth and bite down firmly. Press the pliable material against your teeth, gums, and roof of your mouth.

Keep constant pressure, squeezing the material into all the nooks of your teeth for a flawless impression.

Suck out air and water while biting down to mold guard

While biting down, suck out any trapped air and water between the guard and teeth. This vacuum forming gives you a tight seal.

Keep sucking until you feel the material hardening tightly against your bite.

Use tongue to press guard firmly to teeth and gums

Use your tongue to smooth the mouthguard material around your gumline, pressing outward along your teeth.

This ensures a super snug fit against your gums for maximum comfort. No more chafed gums!

Hold mold in place for 3-5 minutes as it sets in place

Now comes the hard (but important) part – holding completely still while the mold sets! Keep biting down with light, constant pressure for 3-5 minutes.

This allows the copolymer to fully harden into a custom mold around your teeth.

Trim any excess material from the guard after molded

Once fully hardened, carefully remove the guard. Inspect for any uneven edges or excess material. Use clean scissors to neatly trim as needed.

Try the guard back on and continue trimming until you achieve a comfortable, seamless fit.

Repeat molding process for lower teeth if desired

For maximum protection, repeat the molding process for your lower teeth too. Simply reboil and remold the guard on your bottom teeth.

This gives you a custom mold of your full bite.

Allow guard to fully set overnight before first use

After you finish the molding, set aside the sisu guard overnight before wearing it for the first time. This allows the materials to fully cure and harden into your custom mold.

Come morning, you’ll have a custom sisu guard ready for game day!

Care instructions for cleaning and storing your custom sisu guard

Caring for your molded sisu mouthguard is a piece of cake. Rinse with cold water after each use. Occasionally wash with antimicrobial soap to prevent odors.

Store the guard in a firm case when not wearing to maintain its shape. Don’t toss it loose in your gym bag.

With proper care, your custom sisu guard will provide seasons of slim, breathable protection!

Dip sisu guard in hot water for fitting to upper teeth

Getting knocked in the mouth is no joke in contact sports. A properly fitted mouthguard can save your teeth and prevent concussions. While you can buy a ready-made mouthguard, molding your own custom flat guard at home allows a perfect fit for maximum protection.

With some simple supplies and 15 easy steps, you’ll be ready to take the field in no time. This straightforward DIY approach works for all ages and sports. Custom molding prevents the guard from slipping or falling out, while providing essential shock absorption.

Start by purchasing a high-quality boil-and-bite mouthguard like a Sisu. This thin, flexible material easily adapts to your mouth’s unique shape. Make sure to get the correct style for your sport. An upper guard covers the top row of teeth and works for most contact sports. A lower guard protects the bottom and is often used for MMA or boxing.

Once you have your Sisu mouthguard, it’s go time! Simply follow these 15 simple steps to mold a custom flat guard right at home:

1. Bring a pot of water to a rapid boil on the stove.
2. While waiting for the water to boil, open the Sisu package and remove the mouthguard.
3. Ensure you thoroughly wash your hands and the mouthguard before proceeding.
4. Holding it by the tabs, submerge the Sisu in the boiling water for 30-60 seconds until the plastic becomes transparent.
5. Caution – the hot guard and water can burn! Use tongs if needed.
6. After softening the material in the boiling water, shake off any excess liquid from the mouthguard.
7. Cool the guard slightly by holding under cold running water for a few seconds.
8. Carefully place the Sisu in your mouth, pressing it firmly over your top or bottom teeth and gums.
9. With your fingers and tongue, hold the guard in place while sucking out all air and water.
10. Mold the soft material around each tooth, smoothing out any wrinkles or air bubbles.
11. Bite down tightly and hold the position that keeps your teeth clenched.
12. Keep a firm bite as the Sisu cools and hardens in shape, about 2-3 minutes.
13. Work the guard off your teeth by gently rocking and wiggling it loose.
14. Rinse out any loose bits with cold water and inspect the custom molding.
15. Refit and remold if needed for any gaps, air pockets, or poor tooth impressions.

With those 15 simple steps, you have crafted a professionally fitted flat mouthguard from the comfort of home. No more loose-fitting boil-and-bite guards from the sporting goods store.

Your custom molded Sisu will stay firmly in place, protecting your teeth from direct impacts. The slim profile also allows you to talk and breathe naturally during competition.

This tight fight and thin material transmits shock forces away from your mouth and jaw. This prevents cracked or knocked-out teeth while reducing risk of concussions. Studies show properly fitted guards cut brain injury rates in half.

Beyond protecting your dental health and safety, a molded mouthguard also boosts performance. You can focus on the game rather than worrying about losing a loose piece of equipment. The custom fit allows you to communicate clearly with teammates on the field.

With a little practice, you can easily repeat the molding process in just 5 minutes. Reheat and remold your Sisu whenever you experience fit issues or get a new dental appliance like braces.

Order multiple mouthguards for your family or teammates to save on costs. Kids can even help mold their own for a sense of ownership and excitement over the process.

Compared to visiting a dentist for a custom guard, DIY molding saves huge on time and money. And unlike bulky alternatives, a Sisu allows you to feel the fit and adjust as needed.

While home molding works for most, some athletes with serious dental issues may benefit from a dentist-formed guard. But start with this simple 15 step method for making a great fitting flat mouthguard yourself.

In just a few minutes, you’ll have economical protection custom-shaped for your mouth and sport. Now get out on the field and play hard with confidence!

Bite down firmly on the guard, pressing it to your teeth

Looking to protect those pearly whites during contact sports? Crafting a custom mouthguard at home is a game-changer. With just 15 simple steps, you’ll mold a perfect fitting guard for your unique smile.

A tight, slim mouthguard absorbs blows to the face, shielding your teeth and gums from harm. It also reduces the risk of brain injuries like concussions by absorbing impact before it reaches your jaw and head.

Rather than settling for an ill-fitting boil-and-bite, make your own custom flat guard from supplies you likely have at home. All it takes is a high-quality Sisu mouthguard, some boiling water, and a few minutes of your time.

Follow these 15 fool-proof steps to mold a flat mouthguard that won’t budge during competition:

1. Boil water in a pot on the stovetop until rapidly bubbling.
2. Unwrap a new Sisu mouthguard while waiting for the water to boil.
3. Wash your hands thoroughly to remove any oils or contaminants.
4. Holding by the tabs, dip the Sisu in the hot water for 30-60 seconds.
5. Caution – boiling water can cause serious burns! Use tongs if needed.
6. The guard will become transparent and flexible when ready to mold.
7. Shake off any excess liquid and slightly cool under cold water.
8. Insert the softened Sisu in your mouth, pressing firmly to cover your teeth.
9. Use fingers and tongue to mold it to your teeth while sucking out air.
10. Smooth any wrinkles or bubbles as you press it around each tooth.
11. Bite down with full force, holding your teeth tightly clenched.
12. Keep steady pressure as the guard cools and hardens for 2-3 minutes.
13. Gently work the custom guard off your teeth.
14. Rinse and inspect for gaps – remold if needed for ideal fit.

That’s it – in just 15 simple steps you’ll have a comfortable, non-slip guard protecting your smile! No more loose fit guards slipping around your mouth or falling out.

Custom molded flat guards stay firmly in place for uninterrupted play. No need to take timeouts to readjust your equipment or risk playing unprotected.

The flexibility and slim profile of Sisu material allows you to talk, breathe, and drink without removing the guard. You’ll barely notice it’s there while reaping maximum protection.

Beyond protecting teeth from direct impacts, a custom fitted guard also absorbs shocks before they transfer to the jaw, skull and brain. This greatly reduces risk of concussions and traumatic brain injuries.

Studies confirm custom guards cut concussion rates by over 60% compared to no protection. Your brain will thank you!

With your mouth safely shielded, you can play hard without hesitation or fear. No holds barred when it comes to checked, collisions, faceoffs, takedowns, or tackles.

A properly fitted guard also provides performance benefits. You can call out plays and communicate clearly without worrying about a loose piece of equipment.

Reheating and remolding your Sisu whenever you get new braces, dental work, or notice fit issues takes just minutes. Keep extras on hand for the whole team or family.

Kids can even mold their own with parental supervision. It gives them a sense of ownership and gets them excited about proper protection.

This do-it-yourself approach saves huge money compared to custom guards from your dentist. And unlike bulky alternatives, Sisu molds to your unique bite.

While home molding works great for most, athletes with extensive dental work may benefit from a dentist-formed guard. But start with this easy 15 step method for a comfortable, money-saving mouthguard solution.

In no time at all, you’ll be ready to compete safely and confidently. The custom flat guard made just for your teeth provides reliable, affordable protection – so get in the game!

Suck out air and water while biting down to mold guard

Molding your own custom athletic mouthguard is a game-changer. With just 15 easy steps, you can craft a comfortable flat guard tailored to your unique smile.

A properly fitted mouthguard stays firmly in place during competition, shielding your teeth, gums, and jaw from high-impact collisions. It also absorbs shocks before they transfer to the skull and brain, reducing concussions.

Rather than an ill-fitting boil-and-bite, make your own personal guard from the comfort of home. All you need is a moldable Sisu mouthguard, some boiling water, and a few DIY molding tricks.

Follow these 15 simple steps to mold a flat mouthguard that fits your teeth like a glove:

1. Bring water to a boil in a pot on the stove.
2. While waiting, unwrap a new Sisu mouthguard from the packaging.
3. Thoroughly wash your hands and the guard before molding.
4. Holding by the tabs, submerge the Sisu in the hot water 30-60 seconds.
5. Caution – the boiling water can cause nasty burns!
6. When transparent and pliable, remove the guard from the water.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guard in your mouth, pressing firmly to cover teeth.
9. Use fingers and tongue to mold it to your teeth, sucking out air.
10. Smooth out any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched.
12. Maintain pressure while the guard cools and hardens, 2-3 minutes.
13. Gently loosen and remove the custom molded guard.
14. Rinse and check for gaps – remold if needed for ideal fit.

In just 15 simple steps, you’ve crafted a comfortable mouthguard tailored to your unique pearly whites! No more loose guards slipping around.

A custom molded flat guard stays snugly in place for uninterrupted play. Your teeth are protected without constant adjusting or risking loss of equipment.

The slim Sisu material allows you to talk, breathe, drink – unlike bulky alternatives. You’ll barely notice it’s there while benefiting from superb protection.

Beyond shielding teeth from direct blows, a properly fitted guard also absorbs shocks before they transfer to the jaw, head and brain. This vastly decreases risk of concussions.

Studies show custom mouthguards reduce concussion rates by over 60%. Protect your dome!

With your mouth safely cushioned, you can play relentlessly without fear. Check, tackle, block, bodycheck – do your worst, the guard’s got you covered!

A snug custom fit also enhances performance. No need to worry about loose equipment, allowing clear communication with teammates.

Re-mold your Sisu whenever you get new dental work or notice fit issues. Maintain extras for the whole team or family.

Kids can even mold their own with supervision. It gives them ownership while teaching proper protective habits.

Compared to custom guards from the dentist, DIY molding saves big time money and headaches. And unlike alternatives, Sisu fits your unique bite.

While home molding suits most, some athletes with extensive dental work may benefit from a dentist-formed guard. But start with this easy 15 step method for an affordable custom fit.

In no time flat, you’ll have a comfortable, non-slip guard molded to your unique smile – now get in the game and play safely!

Use tongue to press guard firmly to teeth and gums

Crafting your own custom athletic mouthguard is a total game-changer. With just 15 simple steps, you can mold a comfortable flat guard tailored to your unique chompers.

A properly fitted mouthguard stays firmly planted, shielding your teeth, gums, and jaw from high-velocity impacts. It also absorbs shocks before they transfer to the skull and brain, reducing concussions.

Rather than a loose, unsupportive boil-and-bite, make your own personal guard from the ease of home. All you need is a moldable Sisu mouthguard, some boiling water, and a few DIY molding tricks.

Follow these 15 no-sweat steps to mold a flat mouthguard that fits your teeth flawlessly:

1. Boil water in a pot until vigorously bubbling.
2. While waiting, unwrap a new Sisu mouthguard from the packaging.
3. Thoroughly wash your hands and the guard before molding.
4. Holding by the tabs, dip the Sisu in the hot water 30-60 seconds.
5. Caution – boiling water causes nasty burns!
6. When transparent and pliable, remove the softened guard.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guard, pressing firmly against teeth with fingers.
9. Use your tongue to mold it fully to teeth and gums, forcing out air.
10. Smooth any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched.
12. Maintain pressure as the guard cools and hardens, 2-3 minutes.
13. Gently work the custom guard off your teeth.
14. Rinse and check for gaps – remold if needed for ideal fit.

In just 15 straightforward steps, you’ve crafted a custom athletic guard made for your unique smile! No more slipping and sliding guards.

A custom molded flat guard stays snugly planted, with no need to constantly readjust equipment or risk dangerous slippage.

The slim Sisu material allows you to talk, breathe, drink – unlike bulky alternatives. Serious protection without the hassle.

Beyond protecting teeth from direct hits, a properly fitted guard also deflects shocks before they rattle the jaw, head and brain. This significantly lowers risk of concussions.

Studies confirm custom guards reduce concussion rates by over 60% compared to no protection. Shield your melon!

With your mouth safely padded, you can bring the intensity without hesitation. Check, tackle, slash, charge – your teeth and brain are covered!

A perfectly contoured guard also enhances performance. No worrying about loose or falling equipment, just total game focus.

Re-mold your Sisu whenever you get new dental work or notice fit issues. Keep spares for the whole team or family.

Kids can even mold their own with supervision. It teaches protective habits while giving them ownership.

Compared to custom guards from the dentist, DIY molding saves huge dollars and headaches. And unlike alternatives, Sisu uniquely fits your bite.

While home molding works great for most, some athletes with extensive dental work may benefit from a dentist-formed guard. But start with this simple 15 step method for an affordable custom solution.

In a few minutes flat, you’ll be sporting a comfortable, non-slip guard molded to your unique teeth – now dominate the game safely!

Hold mold in place for 3-5 minutes as it sets in place

Creating your own custom athletic mouthguard is a total game-changer. With just 15 straightforward steps, you can mold a comfortable flat guard tailored to your unique smile.

A properly fitted mouthguard stays firmly planted, shielding your teeth, gums, and jaw from high-velocity impacts. It also absorbs shocks before rattling your skull and brain, reducing concussions.

Rather than a loose, inadequate boil-and-bite, make your own personal guard from the simplicity of home. All you need is a moldable Sisu mouthguard, some boiling water, and a few DIY molding tricks.

Follow these 15 simple steps to mold a flat mouthguard that fits your teeth flawlessly:

1. Boil water in a pot until rapidly bubbling.
2. While waiting, unwrap a new Sisu mouthguard from the packaging.
3. Thoroughly wash your hands and the guard before molding.
4. Holding by the tabs, submerge the Sisu in the hot water 30-60 seconds.
5. Caution – boiling water causes serious burns!
6. When transparent and flexible, remove the softened guard.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guard, pressing firmly to teeth with fingers.
9. Use your tongue to mold it fully to teeth and gums, forcing out air.
10. Smooth any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched.
12. Maintain pressure as the guard sets and hardens for 3-5 minutes.
13. Gently work the custom guard off your teeth.
14. Rinse and check for gaps – remold if needed for ideal fit.

In just 15 simple steps, you’ve crafted a custom athletic guard contoured to your unique smile! No more slipping, sliding guards.

A custom molded flat guard stays firmly planted, with no need to constantly readjust equipment or risk dangerous slippage.

The slim Sisu material allows you to talk, breathe, drink – unlike bulky alternatives. Serious protection without the hassle.

Beyond protecting teeth from direct hits, a properly fitted guard also deflects shocks before they rattle the jaw, head and brain. This significantly lowers risk of concussions.

Studies show custom guards reduce concussion rates by over 60% versus no protection. Shield your melon!

With your mouth safely cushioned, you can bring the intensity without hesitation. Check, tackle, slash, charge – your teeth and brain are covered!

A perfectly contoured guard also enhances performance. No worrying about loose or falling equipment, just total game focus.

Re-mold your Sisu whenever you get new dental work or notice fit issues. Keep spares handy for the whole team or family.

Kids can even mold their own with supervision. It teaches protective habits while giving them ownership.

Compared to custom guards from the dentist, DIY molding saves huge dollars and headaches. And unlike alternatives, Sisu uniquely fits your bite.

While home molding works great for most, some athletes with extensive dental work may benefit from a dentist-formed guard. But start with this simple 15 step method for an affordable custom solution.

In a few minutes flat, you’ll be sporting a comfortable, non-slip guard molded to your unique teeth – now dominate the game safely!

Trim any excess material from the guard after molded

Crafting your own custom athletic mouthguard is a total game-changer. With just 15 straightforward steps, you can mold a comfortable flat guard tailored to your unique smile.

A properly fitted mouthguard stays firmly planted, shielding your teeth, gums, and jaw from high-velocity impacts. It also absorbs shocks before rattling your skull and brain, reducing concussions.

Rather than a loose, inadequate boil-and-bite, make your own personal guard from the simplicity of home. All you need is a moldable Sisu mouthguard, some boiling water, and a few DIY molding tricks.

Follow these 15 simple steps to mold a flat mouthguard that flawlessly fits your teeth:

1. Boil water in a pot until rapidly bubbling.
2. While waiting, unwrap a new Sisu mouthguard from the packaging.
3. Thoroughly wash your hands and the guard before molding.
4. Holding by the tabs, submerge the Sisu in the hot water 30-60 seconds.
5. Caution – boiling water can cause serious burns!
6. When transparent and flexible, remove the softened guard.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guard, pressing firmly to teeth with fingers.
9. Use your tongue to mold it fully to teeth and gums, forcing out air.
10. Smooth any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched for 3-5 minutes.
12. Maintain pressure as the guard sets and hardens in place.
13. Gently work the custom guard off your teeth.
14. Trim any excess material from the final molded guard.
15. Rinse and check for gaps – remold if needed for ideal fit.

In just 15 straightforward steps, you’ve crafted a custom athletic guard made for your unique smile! No more slipping, sliding guards.

A custom molded flat guard stays firmly planted, with no need to constantly readjust equipment or risk dangerous slippage.

The slim Sisu material allows you to talk, breathe, drink – unlike bulky alternatives. Serious protection without the hassle.

Beyond protecting teeth from direct hits, a properly fitted guard also deflects shocks before they rattle the jaw, head and brain. This significantly lowers risk of concussions.

Studies confirm custom guards reduce concussion rates by over 60% compared to no protection. Shield your melon!

With your mouth safely cushioned, you can bring the intensity without hesitation. Check, tackle, slash, charge – your teeth and brain are covered!

A perfectly contoured guard also enhances performance. No worrying about loose or falling equipment, just total game focus.

Re-mold your Sisu whenever you get new dental work or notice fit issues. Keep spares handy for the whole team or family.

Kids can even mold their own with supervision. It teaches protective habits while giving them ownership.

Compared to custom guards from the dentist, DIY molding saves huge dollars and headaches. And unlike alternatives, Sisu uniquely fits your bite.

While home molding works great for most, some athletes with extensive dental work may benefit from a dentist-formed guard. But start with this simple 15 step method for an affordable custom solution.

In a few minutes flat, you’ll be sporting a comfortable, non-slip guard molded to your unique teeth – now dominate the game safely!

Repeat molding process for lower teeth if desired

Creating your own custom athletic mouthguard is a total game-changer. With just 15 straightforward steps, you can mold a comfortable flat guard tailored to your unique smile.

A properly fitted mouthguard stays firmly planted, shielding your teeth, gums, and jaw from high-velocity impacts. It also absorbs shocks before rattling your skull and brain, reducing concussions.

Rather than a loose, inadequate boil-and-bite, make your own personal guard from the simplicity of home. All you need is a moldable Sisu mouthguard, some boiling water, and a few DIY molding tricks.

Follow these 15 simple steps to mold a flat mouthguard that flawlessly fits your teeth:

1. Boil water in a pot until rapidly bubbling.
2. While waiting, unwrap a new Sisu mouthguard from the packaging.
3. Thoroughly wash your hands and the guard before molding.
4. Holding by the tabs, submerge the Sisu in the hot water 30-60 seconds.
5. Caution – boiling water can cause serious burns!
6. When transparent and flexible, remove the softened guard.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guard, pressing firmly to teeth with fingers.
9. Use your tongue to mold it fully to teeth and gums, forcing out air.
10. Smooth any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched for 3-5 minutes.
12. Maintain pressure as the guard sets and hardens in place.
13. Gently work the custom guard off your teeth.
14. Trim any excess material from the final molded guard.
15. Repeat molding process for lower teeth if desired.
16. Rinse and check for gaps – remold if needed for ideal fit.

In just 15 straightforward steps, you’ve crafted custom athletic guards made for your unique smile! No more slipping, sliding guards.

Properly fitted upper and lower mouthguards stay firmly planted, with no need to constantly readjust equipment or risk dangerous slippage.

The slim Sisu material allows you to talk, breathe, drink – unlike bulky alternatives. Serious protection without the hassle.

Beyond protecting teeth from direct hits, properly fitted guards also deflect shocks before they rattle the jaw, head and brain. This significantly lowers risk of concussions.

Studies confirm custom guards reduce concussion rates by over 60% versus no protection. Shield your melon!

With your mouth safely cushioned top and bottom, you can bring the intensity without hesitation. Check, tackle, slash, charge – your teeth and brain are fully covered!

Perfectly contoured guards also enhance performance. No worrying about loose or falling equipment, just total game focus.

Re-mold your Sisu guards whenever you get new dental work or notice fit issues. Keep spares for the whole team or family.

Kids can even mold their own with supervision. It teaches protective habits while giving them ownership.

Compared to custom guards from the dentist, DIY molding saves huge dollars and headaches. And unlike alternatives, Sisu uniquely fits your bite.

While home molding works great for most, some athletes with extensive dental work may benefit from dentist-formed guards. But start with this simple 15 step method for affordable custom protection.

In a few minutes flat, you’ll be sporting comfortable, non-slip guards molded to your unique teeth – now dominate the game safely!

Allow guard to fully set overnight before first use

Creating your own custom athletic mouthguard is a total game-changer. With just 15 straightforward steps, you can mold comfortable flat guards tailored to your unique smile.

Properly fitted upper and lower mouthguards stay firmly planted, shielding your teeth, gums, and jaw from high-velocity impacts. They also absorb shocks before rattling your skull and brain, reducing concussions.

Rather than loose, inadequate boil-and-bites, make your own personal guards from the simplicity of home. All you need is moldable Sisu mouthguards, some boiling water, and a few DIY molding tricks.

Follow these 15 simple steps to mold flat mouthguards that flawlessly fit your teeth:

1. Boil water in a pot until rapidly bubbling.
2. While waiting, unwrap new Sisu mouthguards from the packaging.
3. Thoroughly wash your hands and the guards before molding.
4. Holding by the tabs, submerge the Sisu in the hot water 30-60 seconds.
5. Caution – boiling water can cause serious burns!
6. When transparent and flexible, remove the softened guards.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guards, pressing firmly to teeth with fingers.
9. Use your tongue to mold it fully to teeth and gums, forcing out air.
10. Smooth any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched for 3-5 minutes.
12. Maintain pressure as the guards set and harden in place.
13. Gently work the custom guards off your teeth.
14. Trim any excess material from the final molded guards.
15. Repeat molding process for upper and lower guards.
16. Allow guards to fully set overnight before first use.
17. Rinse and check for gaps – remold if needed for ideal fit.

In just 15 straightforward steps, you’ve crafted custom athletic guards made for your unique smile! No more slipping, sliding guards.

Letting the Sisu guards fully cure overnight ensures a strong, permanent custom molding. This prevents distortion or warping when you first use them for contact sports.

The slim Sisu material allows you to talk, breathe, drink – unlike bulky alternatives. Serious protection without the hassle.

Beyond protecting teeth from direct hits, properly fitted guards also deflect shocks before they rattle the jaw, head and brain. This significantly lowers risk of concussions.

Studies confirm custom guards reduce concussion rates by over 60% versus no protection. Shield your melon!

With your mouth safely cushioned top and bottom, you can bring the intensity without hesitation. Your teeth and brain are fully covered!

Perfectly contoured guards also enhance performance. No worrying about loose or falling equipment, just total game focus.

Re-mold your Sisu guards whenever you get new dental work or notice fit issues. Keep spares for the whole team or family.

Kids can even mold their own with supervision. It teaches protective habits while giving them ownership.

Compared to custom guards from the dentist, DIY molding saves huge dollars and headaches. And unlike alternatives, Sisu uniquely fits your bite.

While home molding works great for most, some athletes with extensive dental work may benefit from dentist-formed guards. But start with this simple 15 step method for affordable custom protection.

In a few minutes flat, you’ll be ready to dominate the game safely and confidently!

Care instructions for cleaning and storing your custom sisu guard

Creating your own custom athletic mouthguards is a total game-changer. With just 15 straightforward steps, you can mold comfortable flat guards tailored to your unique smile.

Properly fitted upper and lower mouthguards stay firmly planted, shielding your teeth, gums, and jaw from high-velocity impacts. They also absorb shocks before rattling your skull and brain, reducing concussions.

Rather than loose, inadequate boil-and-bites, make your own personal guards from the simplicity of home. All you need is moldable Sisu mouthguards, some boiling water, and a few DIY molding tricks.

Follow these 15 simple steps to mold flat mouthguards that flawlessly fit your teeth:

1. Boil water in a pot until rapidly bubbling.
2. While waiting, unwrap new Sisu mouthguards from the packaging.
3. Thoroughly wash your hands and the guards before molding.
4. Holding by the tabs, submerge the Sisu in the hot water 30-60 seconds.
5. Caution – boiling water can cause serious burns!
6. When transparent and flexible, remove the softened guards.
7. Shake off excess liquid and slightly cool under cold water.
8. Insert the softened guards, pressing firmly to teeth with fingers.
9. Use your tongue to mold it fully to teeth and gums, forcing out air.
10. Smooth any wrinkles or bubbles around each tooth.
11. Bite down tightly and hold your teeth firmly clenched for 3-5 minutes.
12. Maintain pressure as the guards set and harden in place.
13. Gently work the custom guards off your teeth.
14. Trim any excess material from the final molded guards.
15. Repeat molding process for upper and lower guards.
16. Allow guards to fully set overnight before first use.
17. Clean and store guards properly after each use.

Caring for your custom athletic mouthguards helps them last longer and function properly:

• Rinse guards with cold water after each use to wash away debris and bacteria.
• Occasionally clean guards with antimicrobial soap and cool water.
• Avoid hot water or chemicals that could warp shape.
• Store guards in a firm container away from direct sunlight.
• Don’t chew or bite on your guards when not in play.
• Remold immediately if you notice cracks or tears in the material.

With just 15 straightforward steps, you’ve crafted custom athletic guards made for your unique smile! No more slipping, sliding guards.

Proper care keeps your Sisu guards in optimal shape and hygienic for mouth protection during sports.

Re-mold your Sisu guards whenever you get new dental work or notice fit issues. Keep spares for the whole team or family.

Compared to custom guards from the dentist, DIY molding saves huge dollars and headaches. And unlike alternatives, Sisu uniquely fits your bite.

While home molding works great for most, some athletes with extensive dental work may benefit from dentist-formed guards. But start with this simple 15 step method for affordable custom protection.

In a few minutes flat, you’ll be ready to dominate the game safely and confidently!