How do laser engraving and etching differ. What are the main applications of laser marking. Which laser technologies are used for engraving and etching. How deep can laser marks be. What materials can be laser engraved or etched.
Understanding Laser Engraving and Etching
Laser engraving and etching are advanced marking techniques that fall under the broader category of laser marking. These methods use concentrated light energy to create permanent marks on various materials by removing a portion of the surface. The versatility of laser marking makes it an ideal solution for industries requiring durable part identification and traceability.
Key Applications of Laser Marking
- Text and logos
- Date and time stamps
- Serial numbers
- Barcodes
- 2D Data Matrix codes
- Manufacturing information
Can laser marking be used on any material? While laser marking is highly versatile, the effectiveness can vary depending on the material properties. Most metals, plastics, wood, and some ceramics can be marked successfully, but certain materials may require specific laser types or settings for optimal results.
Distinguishing Laser Etching from Laser Engraving
Although often used interchangeably, laser etching and laser engraving have distinct characteristics. The primary difference lies in the depth of the mark created on the material surface.
Depth Comparison
- Laser Etching: Approximately 0.0001 inches deep
- Laser Engraving: 0.0001 to 0.005 inches deep
- Deep Laser Engraving: Greater than 0.005 inches deep
Why does mark depth matter? The depth of the laser mark can be crucial for certain applications. Deeper marks are often required in industries where parts undergo post-processing treatments like galvanizing or are subject to harsh environments. Additionally, some regulatory standards mandate specific marking depths for compliance.
The Science Behind Laser Etching and Engraving
Both laser etching and engraving utilize a focused beam of light energy to alter the surface of a material. The process involves several key steps:
- A concentrated laser beam is directed at the material surface.
- The beam targets a small area known as the focal point.
- Heat generated by the light energy causes localized material vaporization or melting.
- The focal point ensures precise control over the affected area.
- The result is a smooth, high-contrast, and permanent mark on the material surface.
How does the laser beam create different depths? The depth of the mark is controlled by adjusting the laser’s power, speed, and number of passes over the same area. Higher power, slower speed, and multiple passes result in deeper engraving, while lower power and faster speed produce shallower etching.
Laser Technologies for Engraving and Etching
Several types of laser technologies are employed for engraving and etching, each with its own strengths and ideal applications:
Fiber Laser Marking Machines
Fiber lasers are versatile and can mark a wide range of materials, including:
- Steel
- Titanium
- Aluminum
- Copper
- Ceramics
- Some plastics
What makes fiber lasers so versatile? Their high-energy density and excellent beam quality allow them to mark both reflective and non-reflective materials efficiently. They’re also low-maintenance and have a long operational life.
CO2 Laser Marking Machines
CO2 lasers are ideal for marking organic materials and some synthetics, such as:
- Wood
- Glass
- Rubber
- Plastics
- Cardboard
- Product packaging
Why choose a CO2 laser for these materials? CO2 lasers emit light in the infrared spectrum, which is readily absorbed by organic materials and many plastics. This results in clean, precise marks without excessive heat damage.
Diode-Pumped (Tiburon) Laser Marking Machines
These lasers use ultra-short pulses to deliver sharper marks, making them suitable for lighter etching applications. They’re particularly effective on metals and some plastics.
Green Laser Marking Machines
Green lasers operate at a shorter wavelength, making them ideal for heat-sensitive materials like:
- Plastic
- Glass
- Ceramic
How do green lasers benefit heat-sensitive materials? The shorter wavelength is absorbed more efficiently by these materials, requiring less energy to create a mark. This reduces the risk of thermal damage to delicate substrates.
Advantages of Laser Engraving and Etching
Laser engraving and etching offer several benefits over traditional marking methods:
- Durability: The marks are permanent and resistant to wear and environmental factors.
- Precision: Computer-controlled lasers can create highly detailed and accurate marks.
- Versatility: A wide range of materials can be marked using various laser technologies.
- Non-contact process: The laser doesn’t physically touch the material, reducing the risk of damage.
- Speed: Laser marking is generally faster than traditional engraving methods.
- Customization: Easy to change designs or patterns without tooling costs.
Are there any limitations to laser engraving and etching? While these techniques are highly versatile, they may not be suitable for all materials or applications. Some materials may discolor or degrade under laser treatment, and very reflective surfaces can be challenging to mark without specialized equipment.
Industrial Applications of Laser Marking
Laser marking technologies find applications across numerous industries:
Automotive Industry
- VIN numbers
- Part traceability
- Dashboard controls
Aerospace
- Component identification
- Safety-critical part marking
- Maintenance tracking
Electronics
- PCB marking
- Serial numbers on devices
- Calibration information
Medical Devices
- UDI (Unique Device Identification) marking
- Surgical instrument tracking
- Implant serialization
How does laser marking contribute to product safety and traceability? By providing permanent, tamper-resistant identification, laser marking helps in quality control, counterfeit prevention, and efficient product recalls when necessary.
Choosing the Right Laser Marking Solution
Selecting the appropriate laser marking technology depends on several factors:
- Material properties
- Required mark depth and contrast
- Production volume
- Environmental conditions
- Regulatory requirements
- Budget constraints
What should be considered when implementing a laser marking system? It’s crucial to evaluate the specific needs of your application, including the type of material, desired mark quality, production speed requirements, and any industry-specific standards. Consulting with laser marking experts can help in choosing the most suitable technology and system configuration.
Future Trends in Laser Engraving and Etching
The field of laser marking is continually evolving, with several exciting trends on the horizon:
- Integration with Industry 4.0 and IoT for improved traceability
- Development of more energy-efficient laser sources
- Advancements in ultrafast laser technology for even finer marking
- Expansion of laser marking applications in emerging industries
- Improved software for easier integration and operation
How will these trends impact manufacturing and product identification? As laser marking technologies become more advanced and integrated with smart manufacturing systems, we can expect improved product quality, enhanced traceability, and more efficient production processes across various industries.
Laser engraving and etching have revolutionized the way we approach permanent marking and identification across numerous industries. From creating intricate logos to ensuring critical part traceability, these technologies offer unparalleled precision, durability, and versatility. As the field continues to advance, we can anticipate even more innovative applications and improved capabilities, further cementing the role of laser marking in modern manufacturing and product identification processes.
Laser Etching/Engraving and Engraver Machines
Both laser etching and engraving fall under the general category of laser marking. Laser etching and engraving are similar in that they produce permanent marks created when a laser removes material from the surface of an object.
These versatile part marking methods can be used on almost any material, making them an ideal solution for a variety of industries that require permanent marks for part identification and traceability. There is also a range of industrial applications where manufacturers can use laser etching and engraving to mark the following:
- Text
- Logos
- Date or time stamps
- Serial numbers
- Barcodes
- 2D Data Matrix codes
- Other important manufacturing information
What is the Difference between Laser Etching and Laser Engraving?
How Do Laser Etching and Engraving Work?
What Types of Laser Engraver Technology Will Make These Marks?
What is the Difference between Laser Etching and Laser Engraving?
The terms laser etching and laser engraving are often used interchangeably, but there are some important distinctions between them.
The key difference between these techniques is the depth of the mark. As the depth of the laser etched mark increases, it is often considered engraving followed by deep engraving.
The method you select is dependent on the type of mark you want to achieve. For instance, some post-processing applications such as galvanizing require greater mark depth to ensure mark quality and readability. Certain industries also require particular marking depths to meet regulatory standards.
| Laser Etching | 0.0001 in. Depth |
| Laser Engraving | 0.0001 – 0.005 in. Depth |
| Deep Laser Engraving | > 0.005 in. Depth |
How do Laser Etching and Engraving Work?
-
To create permanent marks, laser etching and engraving processes start with a beam of concentrated light energy.
-
The laser beam targets a small area of the material, known as the focal point.
-
The heat generated by the light energy allows the laser machine to alter the material’s surface, while the focal point ensures it affects only a specified part of the surface.
-
The result is a smooth, high-contrast, lasting mark, which can be human readable (serial number) or machine readable (barcode), etched or engraved into the part’s surface.
In the laser etching process, this mark will reach a depth of about 0.0001 inches. In the laser engraving process, the mark depth is typically up to 0.005 inches.
A subset of this process, known as deep laser engraving, is characterized by a mark that is greater than 0.005 inches deep. These marks are extremely durable and beneficial for industries where marks need to withstand harsh conditions.
What Types of Laser Engraver Technology will Make These Marks?
Beyond the marking process, another critical factor in getting the final mark you need is the laser engraving technology.
While many variables affect your choice in laser engraving machine, there are a few common technologies used for laser etching and engraving:
- Fiber laser marking machine
Marks a wide variety of materials, including steel, titanium, aluminum, copper, ceramics and some plastics - CO2 laser marking machine
Ideal for wood, glass, rubber, plastics, cardboard, and product packaging - Diode-Pumped (Tiburon) laser marking machine
Ultra-short pulses deliver sharper marks for lighter etching applications - Green laser marking machine
Shorter wavelength for heat-sensitive materials, including plastic, glass, and ceramic - UV laser marking machine
Minimizes heat damage for fast, clean, hygienic marks - LightWriter Laser Marking Workstation
Easy, economical desktop laser engraver
Custom Laser Engraving Online, Same Day Delivery
Engraving is a method for placing a patterned design onto the surface of a material by cutting a very shallow layer.
Such a pattern can be any design conceivable, but unlike printed designs, engraving is monochromatic meaning that it can only be two colors; the surface of the material or a slightly darker shade caused by shadowing in the engraved lines.
To achieve engraving with a laser cutter, the laser beam is either reduced in intensity, or the laser beam is moved across the material extremely fast. Both methods will result in an incomplete cut into the material, and the use of computer-controlled machinery helps to achieve a highly precise engraving depth.
The first major advantage to using laser engraving is that the resulting design is virtually impossible to remove as it is simply an absence of material. A printed design, however, can be scratched off or painted over making it far less durable.
The second major advantage of laser engraving is that the engraving process is easily repeatable. As the design is etched into a surface using a computer-controlled laser beam sending the same numeric commands will produce an almost identical engraving every single time.
The third advantage to laser cutting is that the engraving process can often be done in the same machine that cuts. This effectively removes the need for operators to handle parts through multiple production processes, and it also produces engravings that are precisely placed on workpieces.
The fourth advantage to laser cutting is that engraving is mass production friendly meaning that it is easily scaled. An engraved design is transcribed from a monochromatic image that can be changed during any time of the production process allowing for unique features such as IDs, corrections, and edits.
No, engraved features on a part cannot be removed as they are made by removing material to create a height difference. The only way an engraved pattern can be removed is to engrave the entire surface of the material by either extreme sanding or a laser cutter to remove areas that have not to be engraved.
However, softer materials such as wood and plastic can have their engraved edges smoothed over time, and thin engraved lines can get debris trapped in them.
Generally speaking, engraving is dependent on the underlying strength of the material being engraved.
Pricing for engraving is dependent on your design. Area engraving is performed like an old school printer, with the laser head moving back and forth removing material in very thin lines. As such large areas of engraving can be time consuming and increase pricing quite a bit and a small area of engraving will likely be quick for the laser to perform and therefore make only a small difference to price. The most cost effective way to use area engraving would be for medium sized text for labelling parts.
Because the engraving process is just an incomplete cut, any material offered by Ponoko can be engraved. Some materials such as foam and PETG don’t show engraving well and are better suited to cutting only. Clear acrylic is popular for engraving because it comes out frosty and can be edge lit to create lighting displays. Two color acrylics engrave down to a second color for a contrasting graphic effect making them a good option for engraving also.
Engraving can be used for almost any application that does not require graphics with color. One common example of laser engraving is to mark parts with unique IDs that help with part tracking through production lines and supply chains.
Another common example of laser engraving is the etching of control panels that are used in an industrial environment. Such a panel can be made using a tough material and provide information that is not easily removed (i.e. motor controls, dial settings, and explanatory text).
Engraving can also be used in decorative pieces and works particularly well with wood. Some examples of decorative pieces suitable for engraving include keychains, covers, plaques, awards, and signs.
Laser Engrave Your Logo on a M2A1 Ammo Can
Custom Logo Laser Engraved M2A1 50cal Size Grade 1 Ammo Can
Make a statement with a custom laser engraved US Military M2A1 50 cal size Grade 1 ammo can personalized by Clean Ammo Cans! We’ll add a laser engraved logo of your choice on an M2A1 ammo can to represent a business, group, send a message at the range or give someone an awesome personalized gift for any occasion.
Logo permanently added to the blank side of an authentic, Grade 1, excellent condition, original US military ammo can.
Copyrighted or trademarked logos or images are not eligible to be laser engraved unless you own the rights or have permission.
Upload a vector file (SVG, PDF, EPS, AI) of the design you want laser engraved in the upload file feature on the product page.
Each laser engraved M2A1 ammo box is shipped in a cardboard box via UPS Ground or USPS Priority Mail.
Grade 1 Ammo Condition Description:
Grade 1 ammo cans will have little to no exterior surface rust or blemishes. Corrosion is very minor, and limited to the contact points or pivot points on the cans if any corrosion exists at all. The interior of the cans are also free of corrosion and the seals are in new condition. Minimal dents or dings and no attempts to “demilitarize” the cans by covering the original markings. Most Grade 1 cans are in like new condition aside from minor handling or transportation wear.
Ammo Cans are shipped from the ammunition factory inside wooden crates which generally leave some minor scuffs on the exterior. Military ammo cans are not a commercial/retail product so they are handled and packaged much differently than retail goods which are intended to arrive in perfect condition. Grade 1 from CleanAmmoCans.com is the peak condition for military surplus and is as close to new as possible with a used, surplus product. Most of our customer reviews describe our Grade 1 ammo cans as new condition despite being a surplus item.
M2A1 Ammo Can Specs:
- Outside Dimension: 11-3/4″ x 6″ x 7-1/2″
- Inside Dimension: 11″ x 5-1/2″ x 7″
- Color: Olive Drab
- Weight: 5.2 lbs each
Laser Engraved Knives | Laser Engraved Multi-Tools
No Minimum Quantity
Engraved products from Rocky National can be ordered with any standard text or logo with no minimum order requirements. Set up charge may apply for logos or special artwork. There is no set up fee for standard fonts and text only.
Engraving Set up Fees
$29 one time set up charge for customer logos. No set up for duplicate reorders using same logo. Custom design or art services may have additional set up cost.
See logo requirements for additional information on acceptable digital file formats.
Proofs
A proof and cost estimate will be provided on orders with custom logo engraving. To get a digital proof of your logo on a product please call 1-800-705-2040 or contact us for a quote.
Engraving Descriptions
Stainless Steel Bare Metal Laser engraving on bare stainless steel changes the molecular carbon |
Coated Stainless Steel Knife blades are often coated with a black or grey coating. |
Knives and tools with this type of coating can be laser engraved. Laser engraving on these surfaces will remove the coating resulting in the base metal showing after engraving. Engraving will show as silver or the color of the base metal.Engraving Anodized Aluminum Anodized aluminum handles on multi-tools and knives can be laser engraved. Laser engraving on anodized aluminum will result in a white mark. This laser mark is permanent and resistant to wear or fade. |
Engraving Fonts
Logo Options
Logo Options
At Landmark, we understand the competitive culture and we have proven to clubs all over the world that our furnishings are the best choice you can make for your own personal course presentation. Choose from the logo and identity choices below.
More Options
Cast Bronze & Aluminum
We start by selecting only metal grades that meet or exceed industry standards.
Our bronze alloy contains roughly 85% copper, making it an excellent metal for exterior use. Without a proper finish, even the strongest metals will fall victim to the environment. Our powder-coat and clear-coat systems exceed industry standards, offering the best protection for your investment. Landmark also provides a unique opportunity to accommodate nearly all shape and size requests.
Laser Engraving
Our most common method of personalizing club furniture, the Landmark laser branding signature service is now more efficient and more cost effective than ever! Using a highly concentrated laser, our machine is as versatile as it is precise. We can burn your logo and/or corporate identity into a variety of materials, including all options in our Hardwoods collection and even granite at an astounding 500 DPI (dots per inch), ensuring an exact replica of your logo every time.
Laser Cut Metal
Our custom laser cutting service service offers you the ability to have a logo, identity, or design cut from a variety of metals.
It allows a level of accuracy and complexity impossible with conventional machining tools, such as smooth curves in text and complex logo designs. A wide variety of custom metal finishes are available, including polished, aged, rusted, and antique finishes. We started our laser cutting service to create custom logos, but of course, and part is welcome – including projects requiring custom metal design accents.
Routered & Poured
Using two state-of-the-art CNC machines, we are able to router and color-fill intricate logo designs into your Hardwoods (Rinowood or Amarillo) and EasyCare products, offering a vibrant, long-lasting approach to personalizing your exterior presentation.
Granite
There is no better compliment to Rinowood and recycled plastic than sandblasted natural stone. Offering a wide range of stone colors, and shapes cut to meet any design, Landmark natural granite tiles are a wonderful choice for your logo presentation.
Vinyl Decal
Our decals are made from high-strength 3M IJ180-10 Film (for solvent, UV & Latex Ink Jet Printing) with excellent adherence, water, moisture, and weather resistance (not including immersion). They also resist mild alkali, mild acids, and salt.
Company Info
Landmark Golf Course Products
W184S8425 Challenger Drive
Muskego, WI 53150 USA
View Catalog
Browse our catalog online or request a free hard copy to be mailed to you. Prices are subject to change due to market fluctuations in raw materials.
©
2021 Landmark Golf Course Products
Engraving Logos | 587 Custom Engraving Logo Designs
The #1 website for custom Engraving logos.
Get inspired by beautiful Engraving logo designs
Server not responding
An unexpected error occured, please refresh the page and try again.
Refresh page
1 – 20 of 587 engraving logos
Make your own engraving design
More engraving design galleries
Server not responding
An unexpected error occured, please refresh the page and try again.
Refresh page
Red Bolt Laser Engraving
OUR PEAK SEASON FOR 2021 IS HERE!
NOW IS THE TIME TO ORDER!
Red Bolt Laser Engraving is a complete laser marking, engraving and etching service serving the engraving needs of the general public, companies and organizations.
We offer a wide range of laser equipment to handle organic material as well as ferrous and non-ferrous metals. In addition we have the capability to cut multiple types of material, laser etch or abrasive carve glass.
You will find we offer outstanding quality and attention to detail to ensure your project is a success.
SERVICES
Stainless Steel Drinkware Promotional Laser Marking – We specialize in bulk case quantity custom laser marking of Tumblers, Cups & Water Bottles for companies, organizations and clubs.
Unlike other forms of advertisement, custom tumblers, cups, water bottles & can coolers advertise for years. We use a durable laser marking technology to mark your Company Logo or Organization Logo/Event which will last and last. We laser mark most all popular brands of stainless steel drink ware such as Yeti Custom Tumblers and Ramblers, RTIC Custom Tumblers, Ozark Trail, Members Mark, HOGG & Swell Tumblers. Check out our drink ware image gallery of bare Stainless Steel and Coated Tumblers, Cups, Cooler Cups & Water Bottles. How to Request a Custom Tumbler Pricing Quote.
Laser Glass Etching, Abrasive Glass Carving & Deep Glass Carving with Paint Fill – Check out our custom glass etching services page and stay tuned for updates as we add images to our glass gallery. We have many examples of custom and personalized glass items including etched customer provided wine and liquor bottles.
Our services included laser etching, deep abrasive etching and paint fill.
Knife Laser Marking – commemorate special events, accomplishments or company / individual achievements. Check out our many examples of past knife engraving in our knife gallery.
Part Marking & Serialization – Name plates, ID, Serialization, Inventory, Information or Branding. Check out our wide variety of past projects in our industrial parts gallery.
Custom Firearm Engraving – NFA compliant and graphic engraving. Check out our firearm gallery for many examples of our NFA engraving and other decorative laser engraving projects.
Custom Unique Projects – Unique laser engraved projects of all types. Check out our custom gallery of past projects.
Red Bolt Laser Engraving 6200 N. Shepherd Dr. Houston, Texas 77091
713.
692.8888 Phone
713.699.2773 Fax
[email protected] email
Logo engraving ? 15 min + from 450 R + Kitay-Gorod
Features of applying logos
A logo, like other images, can not only be printed, but also engraved on different surfaces. Logo engraving is done in the same way as any other drawing. To work, you need a high-quality layout.
Laser engraving does not reproduce the pattern in color, as it is done by burning the top layer of the material. Laser application is not erased, not deformed, it fits perfectly on metal, leather, etc.
Laser engraving is able to transfer the logo to completely different products from pens to crystal glasses. In this way, you can make a gift with a corporate logo to the director of the company from the team or run a run of flash drives for employees, cup holders for customers. We work with both single orders and large editions.
Why is laser engraving better than printing?
The advantages of laser engraving of logos are efficiency of work, high quality of application, indelibility and indelibility.
No matter how good the print is, over time it begins to fade, or even just slide off the surface of the object. The thing, of course, does not lose its properties from this, but the appearance becomes not very pretty. This will not happen with engraving, as this method gently burns through the top layer of the material, leaving the logo image on it.
Where can logo engraving be used?
Laser engraving is done on different surfaces (metal, plastic, glass, leather, wood), so you can brand different things:
- Flash drives, pens, cup holders, thermoses, key rings;
- Computer mice, badges, wardrobe numbers;
- Glasses, glasses, bottles, wine glasses;
- Wallets, business card holders, cases, bags, tags;
- Boxes, boxes, pencils, etc.
It is possible to use laser engraving for the manufacture of products of different directions. For example, you are producing tokens or key rings for sale and you want to leave your logo there.
Or you have your own line of clothes, bags, backpacks and want to make original leather tags with a logo. We will help you make your product your brand.
Logo engraving is in demand for the preparation of corporate gifts and promotional souvenirs. This is true before the holidays and advertising campaigns.Everyone loves to receive presents, and a present with a logo is also a good marketing ploy. Your gift will always remind the person of the organization that gave it.
How is logo engraving done?
First of all, to apply a logo you need a good layout made in a vector graphics editor. For a laser, clear, well-defined details are important. The wizard creates a program for the engraving machine from your logo, which makes the laser move in the desired direction and burn the image.The laser does not apply color, so all logos are first converted to black and white. But, despite this, he still remains recognizable.
Logo engraving in Moscow – engraving the logo on any items and gifts urgently in the presence of the client
Custom logo engraving
A corporate logo is not only printable. The image will be much more durable if you order the laser engraved logo. Moreover, it is carried out much faster than a drawing, provided that the original laser engraving layout is made with high quality.
This technology does not reproduce the desired color, therefore it cannot be effectively performed on an unpainted metal surface. However, it should be borne in mind that the laser-applied image, in contrast to the drawing, does not erase or fade. It is perfectly applied not only to painted metal, but also to leather, plastic, and other surfaces.
Technological features of laser engraving of a logo for souvenir products
First, the original layout is formed, then it is agreed with the customer.After that, this original layout is entered into a special program. She processes it and sets the algorithm for moving the laser beam for engraving the logo.
This beam is only a few microns thick. Due to this, as well as due to the very high temperature, it instantly burns through the top layer of the treated surface. Moving along it in accordance with the given algorithm, it forms a logo. The power of the laser beam is selected based on the type of material being processed.If it is necessary to make the engraving or part of it deeper, the beam passes along the corresponding trajectory again.
Laser engraving has several valuable advantages. The main one is high speed. Even a large edition of products with an engraved logo can be produced in a maximum of an hour. Moreover, all images will be completely identical, since they are formed in the same program. Another advantage is the high accuracy of the logo application. At the same time, the cost of applying a logo by laser engraving is low, because this technology does not involve the use of expensive manual labor.In addition, there is no mechanical contact with the workpiece during laser engraving, so the risk of damage is minimal.
What to engrave the logo on
The logo can be engraved on a wide variety of items – on pens, glasses, beer mugs, thermoses, and other utensils. This can be a gift to the head of the company or a prospective client. Such gifts are often given before holidays or at exhibitions and symposia. The practice of putting a logo on flash drives for employees is widespread.They often order engraving on various gadgets, computer accessories – on mice, keyboards, tablets. If the company logo is small, it will look good on a wardrobe number, keychain. The engraved logo looks stylish on women’s and men’s wallets, leather or leatherette wallets, business card holders, handbags, mobile phone cases.
If you have your own production of clothes, bags, you can also use our services. To do this, you need to purchase small leather tags, put the logo or the names of the lineup on them, then sew or glue to clothes.It will look very original.
Do you need a logo engraving on metal, leather, glass? We recommend placing an order with our company. To do this, it is enough to come to us with the objects on which you need to engrave, and the logo itself in electronic form. We have modern laser equipment, which allows us to make engraving quickly and with high quality. As a rule, the process itself takes place in front of the client. In most cases, the product with the logo is ready in a few minutes, and the customer receives an original gift.At the same time, the engraved image, unlike the one applied with paint, will never be erased and will not lose color.
If you represent a new company, and it does not yet have a ready-made logo, or have decided to rebrand, our specialists will help you develop this logo, taking into account your wishes and standards adopted in one area or another. After the new logo is developed and approved, we proceed directly to laser engraving.
You may be interested in:
Stylish Laser Engraved Logo Beads for Jewelry Making Popular Picks
Shop for. laser engraved logo beads on Alibaba.com to choose from many different styles. Get everything you need to create eye-catching jewelry as well as arts and crafts projects. Wide choose. Laser Engraved Logo Beads is available in various shapes and sizes to add beautiful details and embellishments to your products. Keep a large inventory close at hand to keep your business productive on the next big project.Several different types. laser engraved logo beads can be found including stainless steel and zinc alloy. Most have small holes through which you can thread a thread or chain. Many unique shapes are available, including artistic style and religious iconography. The high-quality finish allows certain types of products to resist rust and corrosion, ensuring long-term wear.
Find various suppliers on Alibaba.com. laser engraved logo with beads that best suits your needs. Most brands offer customizable options to help you change the look of your components so they are correct. Order your own text or your own laser engraving logo. Some brands have multiple finishes to help you achieve a color that makes your product stand out. Find prices for both small batches and large batches to secure supplies for your factory or workshop.
Whether you make bracelets, necklaces or home decorations, Alibaba.com has the right to do so. laser engraved logo beads for you. Create a pleasing design with the right colors and shapes to create the look you want. Search. laser engraved logo with beads that will suggest the perfect options.
Laser engraving
Laser engraving is a method of applying a permanent image to business gifts and promotional products made of various materials: metal, wood, leather, glass, foam rubber, as well as some types of plastic.
A long-lasting image using a laser is applied to metal pens and mugs, key chains, flash drives, thermoses, wallets and office accessories. In order not to make laser engraving directly on a product (for example, an expensive gift), using a laser, you can cut nameplates of different shapes from metal or foil-clad plastic.
Laser engraving technology
Laser engraving is an automated process. The application parameters are set in the computer program, the object is fixed in the laser installation.In the process of engraving, a laser beam evaporates a layer of material, burning it to a predetermined depth and width. In the promotional industry, two types of laser systems are used: gas CO 2 lasers and solid-state lasers. With the help of a solid-state laser, objects made of metal (including cylindrical ones) are engraved, with a gas laser, laser engraving is performed on leather, wood, glass and other materials, as well as on metal.
Laser engraving of logos on gifts
Laser engraving on metal products
Metal laser engraving is usually done with a solid state laser, which is great for working with reflective surfaces.The color of the engraving will depend on the thickness of the coating and the color of the metal underneath. For example, if the case is made of brass and then coated with paint or resin, the engraving will appear golden on a colored background.
Laser engraving on wood, acrylic, leather, etc.
Laser engraving on wood, leather, plastics is performed with a gas laser – the active medium in it is carbon dioxide. If the material is homogeneous (like wood), the color of the engraving is usually only slightly different from the color of the outer layer.An exception is engraving on two-layer materials: removing the top layer, the laser opens the contrast base.
Laser engraving on a circle
The engraving is carried out with a solid-state laser and allows you to apply large-area images on rounded surfaces, especially on metal dishes.
Manufacturing of nameplates with laser engraving
If it is undesirable to apply laser application directly on the product, engraving is done on the nameplate, which is then glued.Nameplates are usually made of brass or foil-clad plastic.
Advantages of laser engraving souvenirs
- very durable application;
- Possibility of drawing on small runs;
- low cost per item for medium and large runs.
Very durable application
Laser engraving is one of the most durable types of logo printing on business gifts and promotional products.The image is essentially “burned out” in the material of the product, so the engraving is not affected by external factors. It will not rub off or wash off.
Laser-printed logos look especially organic, as if they were created together with the product itself.
However, it should be borne in mind that it will not be possible to choose the color of the engraving or to predict it in advance. It depends on the qualitative and quantitative content of certain substances in the material from which the product is made.And it may even differ slightly within the same print run.
Possibility of laser engraving for small print runs
Laser marking does not require intermediate stages of preparation, which makes this type of branding more efficient in terms of time and makes it easy to calculate the cost of virtually any print run – from one copy to infinity.
However, it should be borne in mind that the engraving time depends on both the surface area and the shape of the product – the engraving process on objects of complex shape will take longer than on flat rectangular surfaces.The maximum image size is determined by the parameters of the equipment.
Low cost per item for medium and large runs
The cost of application depends on the cost of the item itself, the area of application and the complexity of the surface. In general, this type of application becomes economically affordable even with a circulation of 50 pcs.
How to order laser engraving of souvenirs
Do you want to order laser engraving on pens, key chains, leather goods on our website? Just put the product in the basket, place your order and in the commentary to the order indicate that you need laser engraving.our managers will contact you to agree on the engraving parameter.
Laser engraving in Moscow wholesale inexpensively
27 December 2017
Gifts and souvenirs with a logo are a pleasant and effective brand advertisement that works for the company’s image, increases the loyalty of investors and partners, attracts new customers, and therefore contributes to business development and increasing profits from the sale of goods or services.
As advertising and souvenir products, you can use any goods that are convenient for branding – stationery, computer accessories and gadgets, sports paraphernalia and much more.There are various methods of applying logos, one of which stands out for its originality and durability. This unique technology, which will be discussed below, is laser engraving.
Branding made with a laser beam is not subject to aging, is not affected by water, light, chemical media and other physical factors. The image, with the help of a focused beam of light, is, as it were, burned out on the surface of the product and becomes practically eternal. Therefore, laser processing of souvenirs made of metal, wood, leather and glass is now very popular.Using a laser, you can make inscriptions and drawings on flash drives, key chains, pens, diaries, glasses, numbers, plates, badges, signs, nameplates, awards and other items.
Our company offers to order gifts with laser printing in Moscow at a low price as original corporate souvenirs for any occasion. Our catalog contains a wide range of products suitable for engraving:
1.Flash drives in metal, wood and leather cases. Flash drives for logo application are versatile and functional presentations that will be appreciated by both business partners and company employees. We offer flash drives of various designs – with a protective cap, with a swivel and retractable usb connector. Memory card capacities are also available with a choice of 2GB to 64GB. If you need to store large amounts of information, we present usb flash drives with a capacity of up to 512 GB.
2.Wooden objects of our own production will also look favorably with the application of symbols or drawings – caskets, vases, candlesticks, key rings, dishes and kitchen utensils, toys, interior items.
3. Portable chargers in metal, wood and leather cases. External batteries with engraving are status souvenirs for VIPs, welcome surprises for employees or prizes for professional achievements. Portable chargers are especially popular these days, because the use of mobile devices has become part of the habitual rhythm of life of a modern person.Alternative power sources will always help out in an unexpected discharge situation of a cell phone, player or tablet.
4. Leather cases for business cards, because laser engraving on the leather looks very impressive and stylish, complementing the gift memory card.
5. Selfie sticks can also be branded. Here the symbolism will be applied to the metal part of the gadget – a telescopic tube.
6. Metal spinners are also convenient for branding, so you can safely order engraving on the body of such a gadget.Fidget spinners with a logo are an interesting and original hand trainer designed in the same style of the company.
Advantages of laser engraving
In addition to image durability, engraving differs from other application methods:
– filigree precision of lines;
– deep study of the smallest details;
– the ability to work with various materials;
– high speed of application, especially for large runs;
– the sophistication of the monochrome image;
– affordable price.
In addition, this branding method does not require preliminary prepress preparation – making forms, stencils or cliches, and there is no need to purchase consumables such as paints. Therefore, laser engraving is less time-consuming and more productive than printing logo technologies.
Laser engraving on wood
Wood is a very convenient material for laser engraving logos.The technology of laser decoration of wooden products resembles the burning familiar from childhood, but faster, more accurate and detailed. The color of the resulting image depends on the type of wood. On hardwood products, the pattern is dark, and on soft – light. Wooden sticks with engraving, key rings with a logo, organizers, photo frames, premium products are in high demand as a corporate presentation in an eco-style.
Laser engraving on metal and glass
Engraving on metal is, as always, at the peak of popularity and is performed on products from any alloys – copper, brass, aluminum, stainless steel and others.With the help of a focused beam of light, you can draw a logo, an inscription, a drawing on any metal objects – award cups, nameplates, glasses, lighters, watches and other accessories. Pens, portable chargers, metal flash drives are most often ordered as promotional promotional gifts.
Artistic engraving on glass allows you to create original glass souvenirs by individual design for any festive occasion. This method is especially relevant for such glass products that will interact with water – these are glasses, wine glasses, glass ashtrays, because the engraved images will not wash off and will not lose contrast.Modern laser installations can perform not only plane drawings on glass, but also three-dimensional images inside the bulk of three-dimensional glass objects. As gifts of unique beauty, we recommend ordering glass souvenirs with 3d laser engraving inside the product.
Laser engraving on leather
High-tech laser processing technique is used to create respectable leather gifts – diaries, business card holders, flash drive cases and other accessories.Elegant leather USB sticks with engraving – beautiful and practical gadgets for partners, clients, employees, are especially in demand as promotional souvenirs. Currently, decorating leather goods using a laser beam is a more economical method of branding compared to embossing, since it does not require the production of an expensive cliche.
Our company offers an inexpensive wholesale engraving service in Moscow. We brand any souvenirs made of metal, wood, glass, leather and eco-leather in a short time and at the best prices.Own equipment and accumulated experience in this area is the guarantor of the high quality of our souvenir products with logos and other images. Applying the branding by this method gives the goods a special, individual look and turns them into an element of the corporate style of the company. We do engraving to order in Moscow and deliver finished products not only within the capital, but also to any city in Russia with the help of transport companies that we and our clients trust.
Choose souvenirs and gifts for applying a logo in our catalog.
Specify the cost of branding in the Services section or contact our managers.
Flash drives with a logo wholesale
The First Wholesale Company offers direct deliveries of flash drives …
Computer accessories under the logo wholesale in Moscow
We offer a wide range of accessories for …
Laser engraving on metal | LogoPrinter
Laser engraving is a method of engraving an image on a product using a focused laser beam.As a rule, this image has some depth (relief), and this is the main difference between laser engraving and laser marking. Laser engraving is often referred to as the image itself, obtained on a product. As a rule, these are logos, inscriptions, some kind of ornament or drawing.
Laser engraving on handles
| Engraving type | Number of pens per lot, ₽ / application | |||||||
| 1 pc. | up to 50 pcs | up to 100 pcs | up to 300 pcs | up to 500 pcs. | up to 1000 pcs | from 1000 pcs | ||
| Along handle length | 500 | 23 | 16 | 14 | 11 | 10 | 7 | |
| Circle engraving | 750 | 35 | 24 | 21 | 17 | 15 | 12 | |
- Notes:
- Standard handle engraving – D (handle diameter, see p.) * 0.6 (coefficient) = logo height, usually no more than 5 mm.
If the standard size is exceeded, the engraving is considered circular. - Some pen models can be engraved on a metal clip.
- Preparation (revision) of the layout, depending on the complexity – from 500 rubles.
- Cost of unpacking / packing of the Customer’s products – 5 ₽ / pc.
- Select Laser Engraving Ballpoint Pens
Laser engraving up to 10 cm
2 on thermo cups, flasks, mugs, etc.
| Engraving type | Number of items in a batch, ₽ / application | |||||||
| 1 pc. | up to 50 pcs | up to 100 pcs | up to 300 pcs | up to 500 pcs. | up to 1000 pcs | from 1000 pcs | ||
| Engraving on flat surfaces | 500 | 40 | 28 | 25 | 20 | 18 | 15 | |
| Circular engraving of cylinders | 750 | 56 | 49 | 44 | 37 | 35 | 33 | |
- Notes:
- If the engraving area exceeds 10 cm2, 4 rubles will be added to the price for each additional 1 cm2
- Vacuum flasks, mugs, etc.p. Standard engraving – D (diameter cm.) * 0.25 (coefficient) = logo length.
If the length of the logo exceeds the standard, then such engraving is considered as circular. - Preparation (revision) of the layout, depending on the complexity – from 500 rubles.
- Cost of unpacking / packing of the Customer’s products – 5 ₽ / pc.
- Laser Engraving Product Catalog
Examples of laser engraving on metal
Laser engraving
Laser engraving
Laser engraving is a method of applying a permanent image to advertising souvenirs made of various materials: metal, wood, leather, glass, foam rubber, as well as some types of plastic.
A durable image is laser applied to metal pens and mugs, key chains, flash drives, thermoses, wallets and office accessories. In order not to make laser engraving directly on the product (for example, an expensive gift), you can engrave on the nameplate, which is then attached to the product.
Laser engraving technology
Laser engraving is an automated process. In a computer program, certain application parameters are set, the object is fixed in the machine.In the process of engraving, the laser beam removes a layer of material by burning it to a specified depth and width. There are two types of laser systems used in the advertising industry: gas CO2 lasers and solid-state lasers. With the help of a solid-state laser, objects made of metal (including cylindrical ones) are engraved, with a gas laser, laser engraving is performed on leather, wood, glass and other materials, as well as on metal.
Laser engraving of logos on gifts
Laser engraving on metal products
Laser engraving on metal is performed with a solid state laser, excellent for working on reflective surfaces.The color of the engraving will depend on the thickness of the coating and the color of the metal under the varnish. For example, if the case is made of brass and then coated with varnish or resin, the engraving will turn out to be golden on a colored background.
Laser engraving on wood, acrylic, leather, etc.
Laser engraving on wood, leather, plastics is performed with a gas laser – the active component in it is carbon dioxide. If the material is homogeneous (like wood), the color of the engraving is usually only slightly different from the color of the outer layer.The exception is engraving on two-layer materials: by removing the top layer of the product, the laser opens the contrast base.
Laser engraving on a circle
The engraving is carried out with a solid-state laser and allows you to apply large-area images on rounded surfaces, especially on thermo mugs and thermoses.
Manufacturing of nameplates with laser engraving
If laser application cannot be performed directly on the product, engraving is done on the nameplate, which is then attached.Nameplates are usually made of brass or foil-clad plastic.
Advantages of laser engraving of souvenirs
- very durable application;
- the ability to work with small editions;
- Low cost per product for medium and large runs.
Very resistant application
Laser engraving is one of the most reliable types of logo printing on advertising souvenirs.The image is essentially “burned out” in the material of the product, so the engraving is not affected by various external factors. She will remain on the subject until the end of its service life.
Laser printed logos look especially harmonious, as if they were created together with the product itself.
However, it should be noted that it is impossible to choose the color of the engraving or to guess it in advance. It depends on the qualitative and quantitative content of certain substances in the material from which the product itself is made.And it may even differ slightly within the same print run.
Possibility of laser engraving for small print runs
Laser marking does not require additional preparation, which makes this type of application faster in terms of time and allows you to quickly calculate the cost of virtually any print run – from one copy to infinity.
However, it should be borne in mind that the engraving time of a product depends on both the surface area and the shape of the product – the engraving process on objects of complex shape will take a little longer than on flat surfaces.The maximum image size is determined by the technical parameters of the equipment.
Low cost per item for medium and large runs
The cost of application depends on the cost of the item itself, the area of application and the complexity of the surface. In general, this type of application becomes economically affordable even with a circulation of 20 pcs.
Prices for applying a logo by laser engraving
You can calculate the cost of engraving souvenirs in the product card directly on the website.
.
