Brine eraser 2 review. Brine Eraser 2: The Ultimate Lacrosse Goalie Head for Enhanced Performance

What makes the Brine Eraser 2 an ideal choice for lacrosse goalies. How does it compare to the original Eraser model. What are the key features and benefits of this unstrung lacrosse goalie head.

Key Features and Specifications of the Brine Eraser 2 Unstrung Lacrosse Goalie Head

The Brine Eraser 2 Unstrung Lacrosse Goalie Head is a high-performance piece of equipment designed to elevate the game of lacrosse goalies at the high school and collegiate levels. This model builds upon the success of its predecessor, offering several improvements and unique features:

• Model: Eraser 2
• Model Number: ERA2UN
• Available Colors: White, Black
• Position: Goalie
• NCAA & NFHS Legal
• 20% lighter than the original Eraser
• Rounded throat for improved grip
• Offset sidewall for enhanced accuracy and control
• Compatible with all manufacturers’ shaft shapes and grips
• Strategic Core Tech Sidewalls for extended head and additional strength

Does the weight reduction in the Brine Eraser 2 affect its durability? Despite being 20% lighter than the original Eraser, the Brine Eraser 2 maintains excellent durability thanks to its innovative design and construction. The Strategic Core Tech Sidewalls extend the head and add two more struts, increasing strength without compromising on weight.

The Evolution of Lacrosse Goalie Head Design: Brine Eraser 2 vs. Original Eraser

The Brine Eraser 2 represents a significant advancement in lacrosse goalie head design. How does it compare to its predecessor? Here are the key improvements:

1. Weight Reduction: The Eraser 2 is 20% lighter than the original model, allowing for quicker hand movements and improved reaction times.
2. Enhanced Strength: Despite the weight reduction, the Eraser 2 maintains excellent durability through its Strategic Core Tech Sidewalls.
3. Improved Grip: The rounded throat design offers better control and handling for goalies.
4. Increased Accuracy: The offset sidewall construction helps improve shot accuracy and ball control.

How do these improvements translate to on-field performance? The combination of reduced weight and enhanced strength allows goalies to react faster to incoming shots while maintaining the necessary durability to withstand high-impact play. The improved grip and accuracy features contribute to better ball control and more precise clears, potentially leading to increased save percentages and more efficient transitions.

Strategic Core Tech Sidewalls: The Secret to Brine Eraser 2’s Strength and Lightweight Design

One of the standout features of the Brine Eraser 2 is its Strategic Core Tech Sidewalls. But what exactly are they, and how do they benefit lacrosse goalies?

Strategic Core Tech Sidewalls are an innovative design element that extends the head of the lacrosse stick and adds two additional struts. This engineering approach serves two primary purposes:

1. Increased Strength: The additional struts reinforce the overall structure of the head, making it more resistant to impact and deformation during play.
2. Maintained Lightweight Design: Despite adding structural elements, the Strategic Core Tech Sidewalls do not significantly increase the overall weight of the head.

How does this technology impact a goalie’s performance? The increased strength provided by the Strategic Core Tech Sidewalls ensures that the head maintains its shape and integrity even under the stress of high-velocity shots. This consistency allows goalies to make saves with confidence, knowing that their equipment will perform reliably throughout the game.

At the same time, by keeping the weight low, the Eraser 2 allows for quick reactions and reduced fatigue during extended periods of play. This balance of strength and agility is crucial for goalies who need to make split-second movements to protect their goal.

Compatibility and Versatility: Why the Brine Eraser 2 is a Goalie’s Best Friend

One of the standout features of the Brine Eraser 2 is its universal compatibility with various lacrosse shafts. How does this benefit players and teams?

• Flexibility in Equipment Choice: Goalies can pair the Eraser 2 head with their preferred shaft, regardless of manufacturer.
• Cost-Effective Upgrades: Players can upgrade their goalie head without needing to replace their entire stick.
• Customization Options: The ability to mix and match heads and shafts allows for greater personalization of playing style and preferences.

Is the Brine Eraser 2 suitable for all skill levels? While designed with high school and collegiate players in mind, the Eraser 2’s features make it an excellent choice for a wide range of skill levels. Beginners can benefit from its forgiving design and improved control, while advanced players will appreciate its lightweight construction and precision.

The Science Behind the Brine Eraser 2’s Offset Sidewall Design

The offset sidewall is a crucial feature of the Brine Eraser 2 that sets it apart from many other goalie heads. But how exactly does it work, and what benefits does it provide?

An offset sidewall design refers to a construction where the sidewall of the head is not in a straight line from the throat to the scoop. Instead, it has a slight curve or “offset.” This design offers several advantages:

1. Improved Ball Control: The offset creates a deeper pocket, allowing for better ball retention during saves and clears.
2. Enhanced Accuracy: The curved design helps guide the ball more consistently during outlet passes and clears.
3. Increased Shot Stopping Surface: The offset can slightly increase the overall surface area of the head, potentially improving save percentages.

How does the offset sidewall affect a goalie’s technique? The design encourages proper form by naturally positioning the head at an optimal angle for making saves. This can be particularly beneficial for developing goalies who are still refining their technique.

Maximizing Performance: Stringing Options for the Brine Eraser 2

As an unstrung head, the Brine Eraser 2 offers goalies the opportunity to customize their pocket to suit their playing style. What are some considerations when stringing the Eraser 2?

• Pocket Depth: A deeper pocket can provide more ball control, while a shallower pocket might offer quicker releases.
• String Tension: Tighter stringing can increase accuracy, while looser stringing might provide more feel and ball control.
• Material Choice: Different materials (e.g., mesh, traditional) can affect the head’s performance in various weather conditions.

How can goalies optimize their stringing for different playing styles? Aggressive goalies who like to clear the ball quickly might prefer a shallower pocket with tighter stringing for faster releases. In contrast, goalies who prioritize ball control and precise outlet passes might opt for a deeper pocket with more whip.

Recommended Stringing Patterns for the Brine Eraser 2

While personal preference plays a significant role in stringing choices, here are some popular patterns that work well with the Eraser 2:

1. 9-Diamond Traditional: Offers excellent ball control and a natural feel.
2. 20mm Mesh: Provides consistency in various weather conditions and is easy to maintain.
3. Hybrid Pattern: Combines elements of both traditional and mesh for a unique feel and performance.

Is there a “best” stringing pattern for the Brine Eraser 2? The ideal stringing pattern varies depending on individual playing style, skill level, and personal preference. Experimenting with different patterns and adjusting based on performance feedback is the best way to find the optimal setup.

Maintenance and Care: Ensuring Longevity of Your Brine Eraser 2

Proper maintenance is crucial for preserving the performance and extending the lifespan of the Brine Eraser 2. What are some essential care tips for this lacrosse goalie head?

• Regular Cleaning: Rinse the head with clean water after each use to remove dirt and sweat.
• Proper Storage: Store the head in a cool, dry place away from direct sunlight to prevent warping.
• Periodic Inspection: Regularly check for any cracks, loose screws, or signs of wear.
• Re-stringing: Replace worn strings or mesh to maintain optimal performance.

How often should a goalie replace their Brine Eraser 2 head? The lifespan of a lacrosse head can vary greatly depending on usage, playing conditions, and care. With proper maintenance, many goalies find that the Eraser 2 can last for several seasons. However, if you notice significant wear, decreased performance, or any structural issues, it’s time to consider a replacement.

Troubleshooting Common Issues with the Brine Eraser 2

Even with proper care, lacrosse goalie heads can sometimes develop issues. Here are some common problems and their solutions:

1. Warping: If the head becomes misshapen, try reshaping it using warm (not hot) water and gentle pressure.
2. Loose Screws: Regularly check and tighten any screws connecting the head to the shaft.
3. Stretched Strings: Replace or adjust strings that have become loose or stretched out.
4. Discoloration: While mostly cosmetic, you can clean stubborn stains with a mild soap solution.

Can extreme weather conditions affect the Brine Eraser 2’s performance? Like most lacrosse equipment, extreme temperatures can impact the Eraser 2. In very cold conditions, the plastic may become more brittle, while extreme heat could potentially cause warping. Storing the head at room temperature and avoiding leaving it in hot cars or direct sunlight can help mitigate these issues.

The Brine Eraser 2 in Competitive Play: Feedback from Collegiate and High School Goalies

The true test of any piece of sports equipment is its performance in competitive play. How has the Brine Eraser 2 been received by goalies at the collegiate and high school levels?

Feedback from players has been overwhelmingly positive, with many highlighting the following aspects:

• Improved Save Percentages: Many goalies report an increase in their save percentages after switching to the Eraser 2.
• Enhanced Clearing Ability: The lightweight design and offset sidewall contribute to more accurate and powerful clears.
• Reduced Fatigue: The 20% weight reduction compared to the original Eraser has led to less arm fatigue during long practices and games.
• Increased Confidence: The durable construction and responsive feel have boosted many goalies’ confidence in their equipment.

Are there any downsides reported by users of the Brine Eraser 2? While the majority of feedback is positive, some goalies have noted a slight adjustment period when transitioning from other models. Additionally, a few players have mentioned that the head may be slightly wider than some other models, which can take some getting used to for goalies accustomed to a narrower profile.

Comparing the Brine Eraser 2 to Other Top Goalie Heads

How does the Brine Eraser 2 stack up against other popular goalie heads in the market? Here’s a brief comparison:

1. STX Eclipse 2: The Eclipse 2 is known for its durability but is generally heavier than the Eraser 2.
2. Warrior Nemesis 3: The Nemesis 3 offers a similar lightweight design but may not have the same level of durability as the Eraser 2.
3. StringKing Mark 2G: The Mark 2G is comparable in weight and performance but may be more expensive than the Eraser 2.

Is the Brine Eraser 2 the best choice for every goalie? While the Eraser 2 offers excellent all-around performance, the “best” head ultimately depends on individual preferences, playing style, and budget. It’s always recommended to try out different options if possible before making a final decision.

Investing in Your Game: Price Point and Value Proposition of the Brine Eraser 2

When considering any piece of sports equipment, it’s essential to evaluate its value proposition. How does the Brine Eraser 2’s price point compare to its features and performance?

The Brine Eraser 2 is typically priced in the mid-range for high-end lacrosse goalie heads. While not the cheapest option on the market, it offers excellent value considering its features:

• Durability: The robust construction means it’s likely to last multiple seasons with proper care.
• Performance Enhancements: The lightweight design and improved features can potentially lead to better on-field performance.
• Versatility: Its compatibility with various shafts adds to its overall value.

Is the investment in a Brine Eraser 2 justified for all levels of play? For serious high school, collegiate, or club players, the Eraser 2 represents a worthwhile investment in their game. However, for very young or casual players, a more budget-friendly option might be more appropriate.

Where to Purchase the Brine Eraser 2

The Brine Eraser 2 is widely available through various retailers. Here are some options for purchasing:

1. Specialty Lacrosse Stores: Often offer expert advice and sometimes the opportunity to test the product.
2. Online Retailers: Can provide competitive pricing and a wide selection of colors and options.
3. Direct from Manufacturer: May offer exclusive deals or customization options.
4. Team Dealers: Can provide bulk discounts for entire teams or clubs.

Are there any seasonal discounts or promotions to watch for when purchasing the Brine Eraser 2? Like many sporting goods, lacrosse equipment often goes on sale during the off-season or around major holidays. Keeping an eye out for these promotions can lead to significant savings.

In conclusion, the Brine Eraser 2 Unstrung Lacrosse Goalie Head represents a significant advancement in goalie equipment technology. Its combination of lightweight design, durability, and performance-enhancing features make it a top choice for serious players at the high school and collegiate levels. While it requires an investment, the potential improvements in save percentage, clearing ability, and overall performance make it a valuable addition to any goalie’s arsenal. As with any piece of sports equipment, personal preference plays a crucial role, and players are encouraged to test different options to find the best fit for their individual style and needs.

Brine Eraser 2 Unstrung Lacrosse Goalie Head

Brine Eraser 2 Unstrung Lacrosse Goalie Head 

Model: Eraser 2

Model Number: ERA2UN

Color: White, Black

Position: Goalie

Unstrung Lacrosse Goalie Head

Features

NCAA & NFHS Legal

Lightweight and Durable

Rounded Throat for better grip

20% Lighter than the original Eraser

Ideal for High School / Collegiate level player

Offset Sidewall works to improve accuracy and control

Compatible with all manufacturers’ shaft shape and grip

Strategic Core Tech Sidewalls extends the head and adds two more struts, adding strength while not increasing weight

Everysportforless says…

The Brine Eraser 2 Unstrung Lacrosse Goalie Head is the ideal choice for any lax goalie who needs a high level head. The Eraser 2 Head is made with Strategic Core Tech Sidewalls that extends the head and adds two more struts which adds more strength to it while not increasing the weight. This Head is compatible with all manufacturers’ shaft shapes and grips as well as being NCAA and NFHS legal. The new Eraser 2 is 20% lighter than the original Eraser head which means your hands will be quicker. Overall, the Brine Eraser 2 Unstrung Lacrosse Goalie Head offers a ton of great features that will help you become a brick-wall next time you’re in the net.

Warranty & Return Info

Easy Returns – Money Back Guarantee

Everysportforless.com is committed to bringing you an easy and fair customer friendly new/unopened return policy. If you are not 100% satisfied with what you have purchased from Everysportforless.com, return it within 60 days of purchase and take advantage of no-hassle money back guarantee. We’ll refund you the product price on any returned item(s). You won’t have to worry about your refund or store credit. We have you covered. To quote Brianne P. of Naples, Florida, “Rockstar Customer Service”

Note: We do not accept returns on used products. All returns must be in their original packaging with original hang tags and shoe boxes must be free of tape and labels. Otherwise a restocking fee may apply.

Warranty

All of the products we carry are from the top name brands in the industry and come with a full manufacturer warranty covering any and all product defects. If specific Warranty information applies for a product it will be available by clicking the warranty tab just above the description. If you have any questions about the warranty on a given product, let us know via email at [email protected]. 

For an in-depth look at our Return Policies please visit our Returns & Shipping Page

Pork Three Ways: Brined Pork Chops, Fennel-Fontina Sausage, and Swiss Chard with Bacon and Fennel over Polenta Cakes Recipe | Anne Burrell

Deselect All

Brine:

1/2 cup kosher salt

1/3 cup sugar

2 tablespoons coriander seed

1 teaspoon crushed red pepper flakes

Stalks and fronds from 1 fennel bulb, chopped

1 rib celery, chopped

2 cloves garlic

Water

4 bone-in pork rib chops

Chops:

2 tablespoons wild fennel pollen, plus more, if needed

Fennel-Fontina Sausage:

2 pounds pork shoulder, cut into 1-inch chunks (pork should have a good amount of fat)

3 cloves garlic, smashed

2 tablespoons kosher salt

1 tablespoon crushed red pepper flakes

1 tablespoon fennel seed

1 tablespoon ground coriander

1/4 cup cold water

1/2 cup Fontina cheese, small dice

Hog casing

Olive oil

Swiss Chard and Fennel with Bacon:

Olive oil

2 cloves garlic, smashed

Crushed red pepper flakes

3 slices bacon, cut into lardons

5 Swiss chard leaves, stems removed and cut into 1/2-inch lengths, leaves cut into 1-inch lengths

1 fennel bulb, thinly sliced

1/4 to 1/2 cup chicken stock

Kosher salt

Polenta Cakes:

1 cup milk

2 cups water

1 bay leaf

Pinch cayenne pepper

Kosher salt

1 cup polenta

4 fresh sage leaves, finely chopped

1/4 cup mascarpone

Extra-virgin olive oil

4 tablespoons grated Parmigiano-Reggiano

Quality olive oil, for drizzling

Savory Bread Machine Recipes

From Olive bread to Cheese bread there are many savory ingredients you can add to your breads that will surprise and delight.

We’ve sometimes enjoyed a bread loaf made with fruit or nuts, or gone traditional with a white or wheat bread. However, there’s a whole category of savory breads made with everything from cheese to olives, onions, garlic and even pepperoni and salami. These savory bread recipes are great with a bowl of soup, a salad or as a foundation for a sandwich. They’re also good with robust recipes like chili or stews. They’re easy to make in your bread machine as long as you remember a couple of key things.

For one, you may want to select the wheat setting on your bread machine. Many savory additions have added salt and salt tends to inhibit yeast. The wheat setting usually adds time and a kneading/rising cycle to give the yeast a chance to do its job. This is especially true with something like olive bread. Both the olives and the brine which are key ingredients have a lot of salt.

You’ll also want to keep an eye on when you add your savory ingredients. This is similar to adding fruits and nuts. The savory ingredients should sometimes be added after the first kneading cycle. There is often a beep to alert you to this point in the cycle. This isn’t always the case, but if the recipe instructs you to add at a certain point in the cycle, it’s best to do that.

Also, don’t assume that you can add savory ingredients to your automatic fruit and hut hopper if your machine is equipped with one. Savory ingredients tend to be moist and a bit sticky and may get stuck in the hopper. You could always dust them with flour the way we often do with raisins, but even then you may find the savory ingredients get stuck.

You can add just about any savory ingredient including anchovies and chopped cold cuts. Just make sure you are careful with the portion size. Savory ingredients are an accent flavor for a loaf and adding too much can inhibit the rise and overwhelm the taste of the bread. Many savory ingredients like herbs can be either fresh or dried. Typically you would double the amount for a fresh herb versus dried. You also have this option with things like garlic or onions. You can either add fresh or dried and once again you should double the amount for fresh.

With that in mind, here are 3 savory bread loaves that you can bake in your machine. You always have the option to remove the dough after the first rise and reshape it and finish it in the oven after a second rise. This is good to know if you want to make smaller, individual loaves or buns and rolls. That’s up to you.

Olive Bread Recipe:

This is a great bread for pastas and other recipes with flavorful sauces. You can use any type of olive you like although this recipe features Kalamata olives. You can also mix and match different olive varieties, just make sure you keep the portion at 2/3 of a cup. You can try taking that up to a full cup but you’ll definitely want to use the wheat cycle if you do. Try to never exceed a 1/2 cup of olive brine for this recipe although you can mix various olive brines to total a half cup if you want to experiment.

Yields: 2 pound loaf

INGREDIENTS:

• 1/2 cup brine from olive jar.
• Add Warm water (110° F.) to make 1 1/2 cups when combined with brine
• 2 tablespoons olive oil
• 3 cups bread flour
• 1 2/3 cups whole wheat flour
• 1 1/2 teaspoons salt
• 2 tablespoons sugar
• 1 1/2 teaspoons dried leaf basil
• 2 teaspoons active dry yeast
• 2/3 cup finely chopped kalamata olives or other olives of your choice

DIRECTIONS:

Put all ingredients except for the olives in the bread machine in the order indicated in the recipe or according to your manufacturer’s instructions. Choose wheat setting for the best rise; add the olives at the beep. This usually occurs after the first kneading cycle. Let the bread bake in the machine and when the cycle is complete you’re ready to eat. You can add more or less olives but don’t exceed a cup of chopped olives and don’t add more than a 1/2 cup of brine. Remember, the olive brine can adversely affect the yeast if you add too much.

Herbs and Parmesan Bread Recipe:

A proven winner with soups and salads. It’s also a bit easier to make because you can add all of the ingredients to the bread pan from the beginning.

The parmesan cheese can either be fresh parmesan that’s grated, or the dried parmesan in the shaker. Try not to exceed the 4 tablespoons regardless of what type of parmesan you’re using. Parmesan has a robust flavor and too much can overpower the taste of the bread. If you want more parmesan you can always sprinkle some on the bread.

Makes a 2 pound loaf

INGREDIENTS:

• 1 1/3 cups warm water (110° F.)
• 2 tablespoons olive oil
• 2 cloves crushed garlic or 1 teaspoon of dried garlic
• 3 tablespoon combination of basil, chives, oregano, and rosemary (can be fresh or dried but double up to 6 tablespoons if you’re using fresh. You can use any combination of herbs you like but stay true to the measures)
• 4 cups bread flour
• 1 teaspoon salt
• 1 tablespoon sugar
• 4 tablespoons grated Parmesan cheese
• 2 1/4 teaspoons active dry yeast

DIRECTIONS:

Add ingredients to the bread machine in the order indicated in the recipe or the order recommended by the manufacturer. Select the wheat cycle, medium crust and 2 pound loaf setting. You can add all of the ingredients including the savory ingredients at the outset, so you don’t have to wait for a beep to add the parmesan and the herbs.

Cheesy Onion Bread Recipe:

This bread goes great with stews, dishes that are served with a gravy, and spicy foods. Keep an eye on the onions and stay true to the recipe. The dominant flavor profile should be cheesy with an onion accent. Too many onions can be overwhelming. You should also sauté your onions to mellow them. Fresh onions contain sulfuric acid (it’s what makes you cry when you chop an onion), and the acid from fresh onions will have a definite affect on the yeast. You’ll also find that an Extra Sharp Cheddar gives you small chunks of cheese in the bread, while a milder Cheddar will melt into the loaf a bit more. That’s up to you and the texture you prefer.

Makes a 1 1/2 Pound Loaf

INGREDIENTS:

• 1 Cup of warm water (110° F.)
• 1 Teaspoon of Kosher or Sea Salt
• 3 Cups of Bread Flour
• 3/4 Cups of Shredded Cheddar or Monterey Jack Cheese
• 1 Tablespoon Dry Milk
• 2 Tablespoons Sugar
• 2 Teaspoons of Dried Minced Onion or 4 teaspoons of caramelized, sautéed onions
• 1 1/4 Teaspoons of Bread Machine Yeast

DIRECTIONS:

Select Basic-White Cycle – Medium crust, 1.5 pound loaf setting. Here again, you can add the savory ingredients at the beginning. You don’t have to wait for the beep following the kneading cycle. If you choose to brown the onions instead of using dried onions, dice an onion and add 4 tablespoons of the diced onions to some olive oil or butter. Don’t use more than a tbsp of oil or butter and toss them until they’re browned and caramelized. They should reduce to 2 tablespoons and can be added at the beginning of the cycle as well.

Remember, you Can Experiment

You can add other savory ingredients but always keep an eye on the salt content. As a general rule, the higher the salt content the less you should use. Anchovies and bacon are a good example. The same is true for some cold cuts like pepperoni, salami and pastrami. Chop cold cuts into a fine dice and don’t exceed 2 tablespoons with your first loaves. If you get a good result you might try adding a bit more.

Regardless of the ingredients, stick with bread flour and if you are adding a saltier ingredient – choose the wheat cycle to give the yeast its best chance to create a good rise. As you bake more and varied savory breads you can explore various combinations and other ingredients from hot peppers to other types of fresh vegetables. Just keep the savory proportions at a minimum at the outset and you should have success every time.

Steve Nubie has been writing professionally for 38 years. He is a Chef and has traveled across Asia and Europe studying language, culture and cuisine. He instructs culinary classes in the Culinary School at the College of DuPage in Glen Ellyn, Illinois and has written extensively on cuisine, cooking, diet and nutrition. He is a published author of 10 books including a cookbook and continues to write on subjects related to culinary trends.

Latest posts by Steve Nubie (see all)

brine lacrosse uk

brine lacrosse uk

Brine King X Unstrung Lacrosse LAX Head – Various Colors (NEW) Lists @ $110. Flexible Return Policy: This item can be returned unused within 1 Year of purchase. $39.92 $ 39. $52.92 previous … Please see photos for condition. Free postage. Warrior Evo Warp Junior Lacrosse Stick. Pioneer Lacrosse. Egal ob Brine Lacrosse, Warrior Lacrosse, Gait, Debeer, viele Lacrosse Produkte in allen Ausführunge. This item is excluded from discounts, sales, and promotions. $19.75. Sale Videos Not Member Account. Exclusive suppliers of Warrior and Brine in Europe Contact University of Sussex Lacrosse on … We know how important affordable and reliable equipment and apparel is and have this at the forefront of our brand. Custom Stringing option may be ordered. Exclusive suppliers of Warrior and Brine in Europe Brine Lacrosse Empress Head – Pre-Pimped . Cheadle Hulme Lacrosse Club. Helmets Complete Sticks Heads Handles Gloves Protective Bags Accessories Goalie Gear. CLUB Price 66,95 EUR. $4.89 shipping. Free One-Hour Pickup. European Union. FREE Delivery. Our story began with the introduction of the world’s first synthetic lacrosse head in 1970 and has grown from there to where we are today. Furthermore, the scoop is a ground ball machine making it a great candidate for long stick midfield. … … Lacrosse invented in the 17th century by the North American Indians. Sports League. Add to Compare. Community See All. Not Now. Brine Dictator Unstrung Lacrosse Head, White. Brine Lacrosse C6065 Alloy Shaft . Brine Lacrosse Dynasty Warp Pro Minimus Carbon Shaft . Brine King V Mid Shoulder Pad Lacrosse Shoulder Pads $119.00 | Lowest Price Guaranteed | Shop the Best Lacrosse Shoulder Pads at Lax.com and receive Free Shipping on orders of $100 or more! STX Lacrosse. Perhaps Warrior has also discovered that the Brine Eraser 2 design is the future of lacrosse goalie heads. Add to Cart. 4.3 out of 5 stars 7. Account & Lists … Brine Lacrosse Cadence 2 Head, Unstrung. The first lacrosse sticks have been made from one piece of wood. or. Great Savings & Free Delivery / Collection on many items … UK Only. $9.40 shipping. Select options Add to Wishlist Add to Compare Quick view. 6 Diamond mesh: pros- fast break in time, great hold, easy to string. Stocker Soccer 5-aside football FA&UK affiliated leagues. Caterer. This also includes sticks specially made for younger, newer players. Brine Women’s Lacrosse Starter Pack. UKLacrosse, Unit 12A, Global House, Adlington Business Park, Adlington, Macclesfield, Cheshire, SK10 4NL. Stockists of New Balance, Brine, Warrior, Cascade, StringKing, and RageCage. Brine Lacrosse Lax Rebound Wall Replacement Mat (3 x 4-Feet, Black) … £102.85 + £17.04 UK Delivery Import Fees Deposit Included. de en. Pioneer Lacrosse. £32.50. Special Price £42.50 Regular Price £54.50. 92. We know how important affordable and reliable equipment and apparel is and have this at the forefront of our brand. A separated head and shaft was not available during this time. Write a Review Separated Ask a Question. Gloves, Protective. Add to Cart. : 9.99 £ | Adidas Lacrosse Stick An| https://www.for-sale.co.uk FREE Shipping by Amazon. $25.75. Lacrosse is a game of speed, and you need traction to achieve that speed. Brine. Plymouth Lacrosse. Sports Club. Email Password Remember me Login. Brine Lacrosse King V Arm Pads . UKLacrosse, Unit 12A, Global House, Adlington Business Park, Adlington, Macclesfield, Cheshire, SK10 4NL Office: 01625 871 070 (Mon-Fri 8am- 5pm) Field Position. Brine Triumph 2 Lacrosse Gloves £70.00. STX is a global sporting goods leader, innovating since 1970 in the categories of lacrosse, field hockey, and ice hockey. Worldwide. Curbside or In-Store. But does have some signs of wear from use. Add to Cart. 4.2 out of 5 stars 21. … Donate. While not especially built for defence, the stiffness makes it a great candidate. Sports Club in Brighton . incl. TRUE is committed to developing innovative lacrosse equipment for men and women with a fierce dedication to improving performance. UKLacrosse. Brine.com Warrior Europe

90,000 Technology, municipal stage Nomination “Home Culture and Arts and Crafts”

1 Department of Education of the Yaroslavl Region All-Russian Olympiad for schoolchildren of the 2016/2017 academic year Technology, municipal stage Nomination “Culture at home and arts and crafts” Materials and equipment for performing competitive tasks Name of competition Theoretical 1 hour 30 minutes Competition for performing practical tasks 2 hours Equipment for one participant Necessary equipment Test assignments for grade 7 (20 questions) Test assignments for grades 8-9 (25 questions) Test assignments for grades (25 questions) Calculation of materials for one participant of the Olympiad 8 A4 white sheets for a printer 11 A4 white sheets for a printer 14 white A4 sheets for the printer What the participant should prepare Blue fountain pen, plain and colored pencils, felt-tip pens, eraser, glue pencil, scissors Note: test tasks are printed on a color printer Practical tasks for grade 7 (modeling and processing technology of garments): work tables , sewing machines, not less than three workplaces for WTO (ironing board, iron, iron, water for steaming) Modeling: 3 white sheets (p. 1, 3, 4) and 1 color sheet (page 2) A4 size for the printer with the printed template. Technology for processing garments: 3 white A4 sheets for a printer, one piece of cotton fabric with a small pattern measuring 460mm x 460mm Simple pencil, eraser, glue pencil, scissors, work box for sewing works Practical tasks for grades 8-9 (modeling and technology processing of garments): work tables, sewing machines, at least three workplaces for WTO (ironing board, iron, iron, water for steaming) Modeling: 3 white sheets (p.1, 3, 4) and 1 color sheet (page 2) A4 size for the printer with the printed template. Technology for processing garments: 3 white A4 sheets for a printer, one piece from a simple pencil, eraser, glue pencil, scissors, working box for sewing works

2 cotton fabrics with a small pattern, size 100mm x 150mm Practical tasks for classes (modeling and processing technology of garments): work tables, sewing machines, at least three workstations for the WTO (ironing board, iron, iron, water for steaming) button diameter Modeling: 3 white sheets (p. 1, 3, 4) and 1 color sheet (page 2) A4 size for the printer with the printed template. Technology for processing garments: 3 white A4 sheets for a printer, one piece of cotton fabric with a small pattern measuring 100mm x 120mm Simple pencil, eraser, glue pencil, scissors, working box for sewing work Contest of creative projects For all competitions, jury work and organizing committee Multimedia installation for project presentation, screen Stationery: A4 office paper, black and red pens (for the jury), folders and notebooks, desk calculators, rulers, felt-tip pens, markers, transparent files for documentation, cardboard boxes for storage and transportation completed forms of answers to the tasks of the theoretical competition, the results of practical competitions and competitions of creative projects.General equipment Project (explanatory note, product, presentation)

3 Features of the evaluation of competitions When evaluating a theoretical competition in grade 7, 19 questions are recommended to be evaluated at 1 point, a creative task at 6 points, 25 points in total. In grades 8-9, 24 questions are recommended to be assessed at 1 point, a creative task at 11 points, a total of 35 points. In classes, 24 questions are recommended to be assessed at 1 point, a creative task at 11 points, a total of 35 points.If the test task is completed incorrectly or partially 0 points. The total maximum number of points for the theoretical round: in the 7th grade 25 points, in the 8-9 grades 35 points, in the classes 35 points. When evaluating practical tasks (garment processing practice and modeling), the total number of points is 40 points. A modeling task is estimated at 20 points, for a practical task on processing technology, a participant can also receive a maximum of 20 points. For the second competition on the technology of processing garments, when evaluating practical tasks, pre-developed and prepared maps of operational control of practical works are of great help.In these cards, the entire technological process of manufacturing a product is divided into separate operations, each of which is evaluated with a certain number of points, the same for all participants. When evaluating a technological operation, both qualitative indicators and quantitative criteria (dimensions, tolerances, deviations, etc.) are taken into account. The number of points, and in the absence of the evaluation criteria themselves, is determined by the jury. Such a rating system allows you to remove the same number of points from any participant for similar errors.This allows the examiners to avoid disagreements when checking the practical work performed by the participants of the Olympiad. Participants in the competition should not be allowed to arbitrarily change the technology for completing the practical task, as this leads to uncertainty in its assessment. Evaluation of creative projects is carried out according to the following criteria: explanatory note: general design, project justification and task formulation, development of a reference scheme for thinking, analysis of ideas, description of the product manufacturing technology, economic and environmental assessment of the product, description of the final version of the project; product: originality of design, quality of workmanship, practical and social significance; presentation of the project: formulation of the problem, clarity, clarity and persuasiveness of presentation, depth of knowledge and erudition, answers to questions. 8-10 minutes are given to defend a creative project. The municipal stage of the Olympiad is held in November December, at which time the project may not be completed. In this case, the subject-methodological commission determines the degree of project readiness and evaluates the project, taking into account its completion for the regional stage. The maximum number of points for a project is 50. The important characteristics of a participant in the Olympiad when evaluating creative projects should be the following: a) independence of the choice of a topic and its compliance with the content of the stated problem; b) the relevance of the project in terms of consumer demand; c) technological solution and design features of the product, mastery of techniques for performing individual elements; d) a competent combination of colors in the designed products and the originality of the design solution; e) multifunctionality and variability of the demonstrated product;

4 f) the ability of the Olympiad participant to evaluate the results of their project activities; g) understanding the essence of the questions asked and the argumentation of the answers. Project evaluation criteria Explanatory note 14 points Product, product 20 points Project defense 14 points Project evaluation criteria General design Research quality (relevance; substantiation of the problem; formulation of the topic, goals and objectives of the project; collection of information on the problem; analysis of prototypes; selection of the optimal idea; description of the projected material object, the logic of the review). Originality of the proposed ideas, novelty The choice of manufacturing technology (equipment and fixtures). Development of a technological process (quality of sketches, diagrams, drawings, tech.maps, validity of drawings). Economic and environmental assessment of the developed and finished product. Compliance of the content of conclusions with the content of goals and objectives, the concreteness of conclusions, the ability to analyze the results, research. Originality of the design solution (consistency of design, color, composition, shape; harmony) The quality of the presented product, presentation, compliance with fashion trends. Practical significance. Clarity and clarity of presentation, logic of the survey of the research problem.Presentation (ability to hold on when speaking, time of presentation), culture of presentation, culture of speech. Self-assessment, answers to questions Number of points Independence of the project (the author’s own contribution), the use of knowledge outside the school curriculum, knowledge of the conceptual professional apparatus on the problem, the ability to show independent value judgments, the quality of electronic presentation; the complexity of the product, the originality of the presentation. Total 50 Additional criteria (points are added and subtracted) In fact, the winners and prize-winners of the Olympiad are determined by the total number of points scored by each participant in all three competitions.In general, students in grade 7 can get 115 points, grades 8-9 125 points, classes 125 points. The determination of winners and prize-winners is carried out: separately for students of 7 grades, for grades 8-9, a single rating table should be used, for classes a single rating table should also be used.

5 Department of Education of the Yaroslavl Region All-Russian Olympiad for schoolchildren of the 2016/2017 academic year Technology, municipal stage Nomination “Culture at home and arts and crafts” Grade 7 SIMULATION Practical work “Modeling an apron” Completion time 45 minutes Task: 1.Look carefully at the sketch of the product. 2. Find differences with the basic design of the apron (see sheet “Drawing of the apron base”). 3. Simulate the apron. 4. Suggest original ways of finishing this apron.

6 Basic drawing of the apron base for modeling (color sheet) 2

7 Control of the practical task “Modeling the apron” Drawing the lines of the style and the necessary inscriptions on the drawing of the base.3

8 The result of modeling (glue ready-made patterns of the model) 4

9 Department of Education of the Yaroslavl Region All-Russian Olympiad for schoolchildren of the 2016/2017 academic year Technology, municipal stage Nomination “House culture and arts and crafts” Grade 7 PRACTICAL WORK ON SEWING TECHNOLOGY PRODUCT “Making a serving napkin with a seam to hem with a closed cut” Lead time 45 minutes Before starting work, carefully read the task, familiarize yourself with the object of work and check the availability of all materials for work.Materials and tools: a piece of cotton fabric, plain or with a small pattern, size 460mm x 460mm, working box. Hem seam with a closed cut refers to edge seams and is used for processing sections of parts. Sequence of execution and graphic representation Sequence of execution of work Before starting work, check the completeness of the cut parts and their dimensions: 1 piece 460mm x 460mm Graphic image 1. Fold each section of the napkin one by one to the wrong side 2 times and sweep it.The finished napkin should have a size of 40cm x 40cm. 2. Sew on the sequentially folded sections of the napkin and secure the ends of the stitches. 3. Remove the basting stitches.

10 Iron on all seams. Perform the final WTO swipe. 2

11 p / p Technology, municipal stage Nomination “Culture at home and arts and crafts” Grade 7 Card of operational control of practical work “Serving napkin with processing of sections with a seam in hem with a closed cut” Evaluation criteria Points Points of the participant of the Olympiad 3 1 …The sample size corresponds to the specified parameters 40cm x 40cm 2. The width of the seam of the folded edge of the napkin is 18 mm ± 1 mm 3 3. The quality of the stitches 3 4. The edges of the napkin are symmetrical, the corners are even 3 5. The presence of bartacks and their optimal length 2 6. The final wet heat treatment 2 7. Appearance (accuracy of the work performed) 2 8. Compliance with the rules of safe work 1 9. Appearance (availability of work clothes) 1 TOTAL 20

12 Department of Education of the Yaroslavl Region All-Russian Olympiad for schoolchildren of the 2016/2017 academic year Technology, municipal stage Nomination “Culture at home and arts and crafts” Grade 7 Test assignments Completion time 1 hour 30 minutes Read the assignment carefully.Mark with a “+” all correct answers (one or more), or indicate the sequence of actions, or write in the answer. Cooking 1. Find the continuation of Russian folk proverbs and sayings (indicate with arrows). Porridge with butter Hood lunch, Not a piece of bread, Not salted on the table, and in the mansion longing. salty on the back. if there is no bread. you won’t spoil it. 2. Offer milk dishes for: A) breakfast B) lunch C) afternoon tea D) dinner 3. Guess the riddles. Write answers to riddles. Write the name of the dish that includes all of these foods.What else should you add to this dish? They dragged the Fox out of the mink by the curly tuft. Very smooth to the touch, Tastes like sugar sweet! In ten clothes tightly dressed, Often comes to us for dinner. But only you will call him to the table, You yourself will not notice how you shed tears She is in a brown uniform, There is no more satisfying vegetable in the world. In the garden, her bush blooms, Under him in the ground, she grows. The cramped house broke into two halves, And beads-pellets fell from there. Green beads, Sweet vigorous.

13 Technology, municipal stage, “Home culture and arts and crafts”, testing, grade 7, 2016/2017 academic year You saw her in the garden, The taste is wonderful, even sweet.It grows underground, Always brown in color. There are so many dishes with her, look, you surprise yourself. Borsch and again herring under a fur coat, Let the answer be wise He is never sad, And crunches, crunches, crunches. If you want, so serve it on the table, if you want, throw it into the pickle. Name of the dish: 4. “Prepare” breakfast for five people, calculate and insert the missing numbers in the table: Dish Food Products Number of products per person Complex sandwich Number of products for five people Bread 2 slices slices Sausage Cheese Herbs, vegetables 30 g 30 g 10 g Tea Brewing 5 g Sugar 30 g Materials Science 5.Please mark the correct answer. The silkworm produces a silk thread at the stage: A) emergence of a caterpillar from an egg; B) caterpillar growth; C) the formation of a cocoon by the caterpillar; D) transformation of a caterpillar into a pupa; E) transformation of a pupa into a butterfly. 2

14 Technology, Municipal Stage, Home Culture and Arts and Crafts, Testing, Grade 7, Academic Year 2016/2017 6. Draw the symbols for proper care of fabric products using a number of suggested symbols: a) washing manual b) ironing at a maximum iron temperature up to 100 C 7.Fill in the comparative description of the properties of cotton and linen fabrics, using words for reference: more, less, medium, weak, significant, higher, etc. Properties of fabrics Cotton fabrics Linen fabrics Physical and mechanical: Strength stronger than linen stronger than cotton Crumple Crumple crumple Hygienic: Hygroscopic, than linen, than cotton Technological: Looseness of threads, than flax, than cotton Shrinkage Mechanical science 8 . Fill the table. Problems in the operation of the sewing machine and their remedies: Defect Causes of malfunctions Remedy Torn fabric threads along the seam line.Skipped stitches during sewing. 3

15 Technology, Municipal Phase, Home Culture and Arts and Crafts, Testing, Grade 7, Academic Year 2016/2017 9. Check the correct answer. The larger the number of the machine needle, the more the needle itself: A) thicker; B) thinner. Needlework 10. Name the stitch, the variants of which are shown in the picture: Answer: 11. Mark all the correct answers. Sewing products are decorated with embroidery: A) batik; B) hemstitch; C) cutwork; D) folds; D) Vladimir surface.12. Give a definition, write down what it is used for. Monogram 4

16 Technology, municipal stage, “Home culture and arts and crafts”, testing, grade 7, academic year 2016/2017 Textile processing technology 13. Match the name of the seam with the symbol. 1. Stitching wrap-around A. 2. Stitching stitching B. 3. Fold-over with an open cut C. 4. Fold-over with a closed cut D. Answer: 1.; 2.; 3.; Please mark the correct answer. Decorative stitches do not include: A) blind; B) vestibule; B) looped. 15. Continue the sentence. To stitch this means: 16. Indicate in numbers in the left column the correct sequence of technological operations when cutting a garment: 1. Pin the fabric with pins 2. Mark the processing allowances 3. Determine the right side of the fabric 4. Apply control lines and points 5. Trace the parts along the contour 6. Cut out the fabric parts 7. Determine the shared thread 8.Pin up large and small parts 9. Expand large and small parts 5

17 Technology, municipal stage, “Home culture and arts and crafts”, testing, grade 7, 2016/2017 academic year 17. Creative task. You are offered the details of the cut of the skirt: Task: 1) sign on the drawing on the details of the cut the names of the details and the line of the middle of the details (1, 2, 3, 4, 5). 2) indicate the design of the skirt and its features: 3) for the details of the cut, complete the sketch of the skirt: 6

18 Technology, municipal stage, “Home culture and arts and crafts”, testing, grade 7, 2016/2017 academic year 7

19 Technology, municipal stage, “Home culture and arts and crafts”, testing, grade 7, 2016/2017 academic year Costume history 18.Complete your sentence. Lush trim at the collar made of lace or lightweight fabric it. Electrical Engineering 19. Mark the correct answer. What current is needed to operate an incandescent light bulb ?: A) constant; B) variable. Interior of a residential building 20. Continue the proposal. When choosing or decorating a home, special attention is paid to three main qualities of the interior: 8

Unpeeled squid how to clean | Jewelry Review

How to clean squid?

This is a far from idle question for hostesses who, for the first time, are going to pamper their own family with this delicious and extremely healthy product.Nutritionists recommend including this clam meat in your own weekly diet.

Fortunately, it is in perfect harmony with the side dishes of cereals and vegetables, it can be used to prepare many hot dishes and cool snacks.

But before cooking these mollusks, you need to learn how to clean them correctly and quickly. this will be discussed in our article.

Choose the right squid

• Fresh, freshly caught squids are cleaned without any particular problems: the elastic film covering the outside of the carcasses and lining their inner cavity is removed from them with a single “stocking”.But this privilege can only be used by the inhabitants of the sea coasts, who buy seafood from local fishermen.
• Most often we see frozen carcasses with tentacles on the shelves of our supermarkets.

But even such a product can be cleaned without much difficulty, if it has been correctly frozen and stored in compliance with all applicable standards. The most important condition for storing frozen seafood is the inadmissibility of thawing and subsequent re-freezing.Specifically, this event not only aggravates the taste properties of seafood, but also creates obstacles to the cleaning of their carcasses at the time of preparation.

How do I get high quality squid?

To acquire good quality shellfish, you should pay attention to two points.

Shellfish carcasses should not be stuck together or frozen to each other.

If it is unrealistic to separate them, here is a product that has passed the function of re-freezing.

Having found such a product on the counter, never buy it: you will be tortured with cleaning, and the taste will be disappointing, and it may be unsafe for health.

How to choose squid – tips and video review:

Some housewives try to choose squid with the largest and most brightly colored carcasses.This is a fairly common mistake, since these molluscs are old.

The meat of medium-sized and slightly colored inhabitants of the sea is the most tender and tasty.

How to quickly and correctly remove the film from squid? Multiple cleaning methods

How to quickly remove the film from squid? There are several usual and very effective methods, having mastered which, the hostess will spend less and less time on this procedure each time.

Why is it necessary to free mollusks from colored and transparent films? So that the carcasses do not decrease in volume, and the meat does not become tough, since all these metamorphoses often occur due to the fault of a particular transparent film, which acquires extraordinary rigidity during the heat treatment of the product.

Cold clean

With the help of this technique, you can clean either just caught or correctly frozen squids.

There is no need to use any thermal action here.

1. Taking the decapitated carcass, carefully separate the narrow film and begin to gradually tighten it. Ultimately, she will retire completely, leaving a semblance of a “stocking” in her hand.
2. Having cleaned the skin of the mollusk, the entrails and chitinous plate (chord) are removed from it.

Hot method

How to clean frozen squid correctly? Shellfish that have been frozen more than once are best cleaned with a short-term heat exposure.

How to peel squid – video:

Let’s take a step-by-step look at the process of cleaning not decapitated carcasses, but whole squid (with a head and tentacles).

1. The shellfish should be thawed naturally, leaving it at room temperature for a couple of hours.
2. Gently pulling on the head, the entrails are removed from them.
3. Tentacles are cut at almost eye level.
4. The hard beak of the squid, hidden in the middle of the tentacles, is not suitable for food.

It is carefully removed and immediately made sure that there are no debris.

During this time, the skin will separate from the pulp, but the meat itself will not have time to cook.

Contrast shower method

You can quickly peel frozen squid carcasses using this simple method.

1. Having prepared two deepest containers, ice water is poured into one of them, and the gutted shellfish carcasses are poured into the other.
2. After scalding the clams with boiling water from a kettle, they are immediately transferred to another container and kept in cool water.

This manipulation has a dual purpose: on the one hand, it prevents the possibility of early cooking of meat, and on the other hand, it simplifies the removal of the skin from the carcasses.

Grip the remains of the broken film with your fingers and remove.

Boiled shellfish cleaning

Inexperienced housewives often have a question: when to peel squid before or after cooking? It is completely permissible to boil unpeeled shellfish carcasses completely, without preparatory cleaning.

• Having boiled them, they are slightly cooled, and later the film lining them is removed with a solid stocking.
• Sometimes the skin on mollusks under the influence of hot water bursts and curls up, forming a semblance of small balls.

In such situations, a soft kitchen brush can help out. It is enough to rub the surface of the boiled mollusk with it, as there is no trace of the remnants of the film.

We advise novice cooks to try all the methods that allow you to peel squid in order to choose for themselves the one that allows you to do it not only correctly, but also quickly.

How to cook squid correctly?

Having learned to peel squid, they run over to their culinary processing. The most common method of preparing any product is boiling, but it should also be done correctly.

Cooking seafood is not at all difficult, but you should know a few indispensable rules that cannot be violated.

If the shellfish are boiled for a very long time, their meat will look like tasteless gum.

The first sign that the squid is overcooked is a significant decrease in their original size.

When boiling seafood, you need to look at the clock.

If the shellfish are boiled separately, their maximum residence time in the boiling water does not have to exceed four minutes. As part of complex vegetable side dishes, sauces or pilaf with seafood, it is permissible to subject them to heat treatment for half an hour.

The fastest method for boiling squid

• Squids, so that they are soft, need to be kept in a boiling broth for no more than 20 seconds: only under this condition will their meat acquire the necessary tenderness.
• To add a pleasant smell, excellent chefs put a tea bag or half a lemon in a saucepan with boiling water for boiling shellfish.

How to quickly cook squid – video:

The second option for cooking boiled clams

• The water intended for cooking seafood is slightly salted, brought to a boil and flavored with dill and fennel seeds (the addition of finely chopped dill leaves is also permissible).
• Cooked shellfish carcasses are sent to the brine spouting with a spring and the flame is immediately turned off.
• Having tightly covered the container with a lid, give the squid a quarter of an hour so that they can sweat in the brine.
• After that, the boiled shellfish are placed in a colander and cooled in a tightly closed saucepan.

How to boil squid for a light snack?

To prepare this dish you will need:

• Squids – g.
• 1 orange.
• Tomatoes – 2 pcs.
• Fennel – 2 small heads of cabbage.
• Oil (olive).
• Juice of one half of a lemon and 1 orange.

1. Squid, which are well peeled from films, are rinsed with running water.
2. Fennel is cut into careful strips.
3. After peeling the orange, remove all the inner films from it.
4. In a saucepan of boiling salt water, lightly boil the fennel.
5. Add squid to fennel, bring the contents of the pan to a boil, after which the broth is drained.
6. Boiled squid and fennel are seasoned with olive oil, fruit juices, seasoned with spices.
7. Skin and seeds are removed from tomatoes, cut into even slices.
8. All the ingredients of the appetizer (squid, orange slices, tomato slices and boiled fennel greens) are perfectly placed on a painted dish.

You can place a few large boiled shrimp on top.

Another recipe for making squid – in the video:

What delicacies can be made from squid?

The recipes for cooking squid in modern cooking are so diverse that they cannot be enumerated.We will only briefly describe the main methods of their culinary processing.

The following dishes are made from squid at home:

• They are stewed in sour cream.
• Boiled with onions.
• Prepared with vegetables and cereals.
• Bake with cheese and tomatoes.
• They are stuffed with entrails from cereals and vegetables.
• Included in various salads and appetizers.
• Fried in batter.
• Used for cooking meatballs, cutlets, zraz, meatballs.
• They make delicious insides for pies, pies and whites.

How are fried squid prepared?

Before cooking this dish, the squid carcasses obviously need to be peeled.

Do not abuse the use of spices, since the specific smell of all seafood is extremely simply interrupted by the smells of the other components of the dish.

The time for frying squid, as in the case with all other methods of their preparation, must be the shortest.

Crunchy squid in croutons

This delicious and nutritious dish is simply irreplaceable during family celebrations and friendly parties.

He is credited with the characteristics of a good aphrodisiac.

• Squid – 0.5 kg.
• Eggs – 2 pcs.
• Bread crumbs.
• Sour cream-mayonnaise ice cream (consisting of equal amounts of mayonnaise and sour cream).
• A mixture of vegetable oil and butter for frying.
• Spice set.

1. Peeled carcasses are cut into small strips or rings.
2. Prepare ice cream from the consistency of mayonnaise, sour cream and spices.
3. Pieces of squid are dipped in ice cream, after which they are well rolled in the breading mixture.
4. Roasting is created for 4 minutes on a consistency made from cow and vegetable oil.
5. Place the fried rings on a paper towel so that it can absorb the excess oil.
6. After that, the delicacy is perfectly laid out on a flat plate, decorated with herbs and served with pickled cucumbers.
7. Squid is prepared in a similar way in beer batter, in which egg whites, a small amount of flour and beer are placed.
8. This dish mixes amazingly with almost all kinds of sauces.

Fried squid rings in batter – recipe in video:

Secrets of Cooking Fried Squid

• Clams are fried in a pan, in the oven, and on a wire rack.

An extreme cooking method requires the unavoidable marinating of carcasses.

Lovers add a small amount of paprika.

• After holding the clams in the marinade (several hours), the carcasses are sent to the grill, at times pouring the rest of the marinade on top of them.

It’s time to sum up some results.Having learned how to choose, clean and boil squid carcasses, preparing them for cooking various dishes, the hostesses will be able to diversify the diet of their own family, enriching it with a tasty and healthy product.

Maximum benefits, minimum calories, proteins, trace elements, etc. and so on – all this is said not about a magic potion, but about quite banal squids. Indeed, there are few products that are completely natural and just as valuable, while their real monetary value is quite acceptable.Today we have a story about how to properly prepare them before using them in culinary masterpieces.

How to properly peel squid

Let’s tell you a little about the product, in what form it gets into our retail chains and why. Squid is a mollusk, no matter how strange it may sound in the absence of a shell. Its most common species is found along the entire Atlantic coast of Europe, from the cold North Atlantic to the waters washing North Africa.

Understandably, fresh squid on your kitchen counter is an exception.The shellfish are sold frozen whole or cut. How to clean squid at home, do it quickly and correctly, and will be discussed.

Cutting of whole frozen carcasses and the associated cleaning nuances will be discussed a little later. It is more likely that the question of how to clean the squid from the film will arise in relation to the already cut shellfish. It is customary to pack the edible parts of the squid separately, sorting them into tentacles and mantles with fins.

If the carcasses are cut industrially, why do housewives have to face the problem of how to remove the film from the squid? This is not entirely true, for example, in cans, squid, as a rule, are peeled. Sometimes you can find frozen squid meat, already peeled from films, but it is better to avoid such semi-finished products, and here’s why.

Manual cleaning is a painstaking process, as you will see for yourself, as soon as we move on to the practical part of today’s topic and learn how to clean frozen squid.Moreover, at home, you are unlikely to have to deal with more than three carcasses. Imagine how much this process takes in the mass production of semi-finished products.

For this reason, more technological methods are used, allowing both to quickly peel squid and to do it as cheaply as possible. Unfortunately, the technologies used are not entirely harmless if different chemicals are used. Another method involves pre-cooking the carcasses, which affects the quality and taste of the products.

How to clean frozen squid

We will not use any chemical methods. In small quantities, drugs are not cheap, and it is unprofitable and illogical to purchase them. We have already mentioned the dubious safety of this method.

The thermal method, with the help of blanching in boiling water, is more appropriate and it is considered one of the most convenient, since it is not always possible to easily clean squids only with the help of kitchen tools.

So, we have frozen semi-finished products.Let’s start with the right choice while still on the store counter. It is generally accepted that the lighter the squid pulp, the more delicious it will subsequently be. It is difficult to argue with this, but it must be borne in mind that the film on the carcasses can interfere with correctly assessing the color of the pulp itself.

Before peeling squid from the film, frozen carcasses must be thawed. The taste of the dish with squid will largely depend on the correctness of this procedure. If we refused from already peeled carcasses, fearing that they were overcooked during the cleaning process, then we must not make this mistake ourselves.

The total duration of the heat treatment of squid meat should not exceed 3 minutes. And here you will have to include the duration of defrosting, if you decide to carry it out with boiling water or in a microwave oven. In fact, the less boiled or roasted the squid flesh, the more tender it is. In some recipes, this time does not exceed 2 minutes.

The above precautions exclude from defrosting methods all accelerated methods of how to peel squid from the film quickly, including boiling water and a microwave.But the classic methods of slow thawing remain, which are suitable for us.

1. The best option. Fold the carcasses in a bag if you bought squid by weight, and tie it tightly. Place in a bowl or saucepan and completely fill with water, soak in this form in the common compartment of the refrigerator until completely defrosting.
2. A faster method to peel squid. Everything is the same, but we put the container on the kitchen table, away from heat sources. The temperature difference with the refrigerator will allow you to get the same result as in the first case, but much faster.
3. Dry method. In this case, we also pack the squid hermetically, in order to avoid winding, but do not fill it with water and just leave it on the table. To thaw the carcasses more evenly, shake the bag several times.

How to peel calamari from film

So, after defrosting, you have several soft carcasses. For starters, try cleaning them exclusively with a knife or other kitchen tool. The process is simple and there is simply no simpler option, how to clean the squid from the film quickly.

First, make sure there are no viscera inside the mantle, inspect it and remove any remnants if any. Remove the chord, a translucent seal that serves as a kind of spine for the squid. To do this quickly, try to gently turn the robe inside out; there is no better way to properly clean the inside of the squid.

Remove the film from both sides of the mantle, simply grabbing its edge at the cut between the thumb and the blade of the knife. We pull it carefully, if necessary, intercepting it closer to the pulp.

If you do not need to cut the squid into rings, it is convenient to cut the mantle immediately along the side opposite to the chord. This will significantly save time.

Practice first on the film on the outside of the carcass and be patient, we warned that the process is painstaking, since it is rather difficult to peel frozen squids by hand. If this lesson is not successful, and very small pieces of film are separated, we move on to a more practical method.

Let’s arrange a semblance of a contrast shower for the squid.You will need a colander and two pots or bowls of water. We heat one until it boils, the other, on the contrary, we keep cold, if possible add ice cubes to it. The volume of water should be quite significant, at least a colander with carcasses should be completely placed in it.

We put no more than a couple of carcasses in a colander, press them on top with a slotted spoon, quickly dip them in boiling water, watching the stopwatch. It is not joke! The time for keeping the squid in boiling water, maximum, a quarter of a minute, then immediately transfer them together with a colander into cold water.If you hesitate a little, instead of quickly peeling the squid, you simply boil them.

No matter how fast the blanching is, you will have to subtract exactly 30 seconds from the duration of the further heat treatment. This is unlikely to surprise people familiar with the cuisine of the peoples of the Far East, where squid is cooked in some dishes, dipping it in boiling water a couple of times and then cooling it just as quickly.

Further steps are opposite to the description of how to peel squid without heating.The film is destroyed under the influence of boiling water, and we simply wash it and rinse it off with our fingers, lowering the carcass in lukewarm water. Of course, if the individual parts are not warmed up enough, you can help yourself with a knife.

Why such troubles, can you really not do without them? In principle, you can, but you are unlikely to get pleasure from the dish. Let us explain with an example. If you have ever bought inexpensive canned squid, you probably found pieces of pulp inside the jars, harsh and drenched in dark broth.This is what an unpeeled or poorly peeled squid looks like after boiling.

If you are satisfied with such a treat, just buy canned squid. Otherwise, arm yourself with a knife and our advice, because peeling squid from film to cooking is highly desirable and even necessary.

Above, we promised to talk about cleaning the tentacles. There is no special way to clean the tentacles of a squid, we use the methods already listed with a single clarification.It is rather difficult to remove the film from this part of the carcass without blanching, if you cannot do it right away, do not be discouraged and go to the “hot” method.

Squid how to peel and cook whole carcasses

For defrosting, we use extremely slow methods, and the point is not even that the squid will become harder after blanching. The whole carcass must first be gutted, the entrails removed.

Firmly holding the carcass by the mantle with one hand, with the other grasp the head with force and simply spread our arms to the sides, separating the head and pulling the insides out of the carcass.Cut off the tentacles from the head, carefully examining so as not to capture the so-called beak.

In principle, cutting is over, it is not difficult in practice. Further actions begin with the section of the article telling how to peel frozen unpeeled squid. We remove the film, cut the pulp according to the recipe for the dish or leave it whole for now.

Boil squid, dipping it in salted boiling water, for about a couple of minutes. An alternative way is to pour boiling water twice, for a period of a minute.In the latter case, not just boiling water is used, but rather broth. Boil spices, roots in it, add a slice of lemon per liter of water and salt.

Fill the pulp with boiling water, and after keeping in it for exactly a minute, throw the carcass in a colander, rinse it under a tap or clean water. We repeat the process, without fail changing the hot water. This method of boiling squid is ideally combined with the method of hot peeling of the film. The total cooking time is counted as 2.5 minutes, and this is enough to get a tender pulp.

Squid, like all edible ocean dwellers, are low in calories and high in protein. Unfortunately, they are not frequent guests at our table for one simple reason: the hostesses do not know how to clean squid at home. And it’s a pity, because their meat is also dietary , because there is practically no fat in it. With our tips, you will not only learn how to clean these ocean dwellers, but also pamper your loved ones with unusual snacks.

How to quickly, easily and correctly peel squid from the film according to step-by-step instructions

Ingredients

How to choose squid

• When buying, do not go after the size : the smaller the shellfish, the more tender and tasty it is.Carcasses up to 20 cm long are considered small. Too large ones have a pungent ammonia odor, which cannot be completely eliminated.
• Purified shellfish are several times more expensive than . Often, they still have to be cleaned of films and internal cartilages. This means that it is more profitable to buy unrefined shellfish.

• Don’t buy a product with a lot of ice in the package. Ice, as well as dark spots on carcasses, indicate repeated freezing and defrosting.
• The color of fresh squid meat is creamy and the surface is free from cracks or tears.
• Catch time – July and August . The shelf life in the original packaging is no more than 2 years.

Step by step instructions

1. Place the squid in a large saucepan or bowl and cover with boiling water, so that the clams are completely covered. Squeeze the carcasses a little with a fork so that hot water penetrates into all sinuses.

Video on how to properly peel squid from film

The video shows how to quickly remove the film and entrails from squid.The chef explains what to look for when cleaning different types of shellfish.

Secrets from the Chef

• The first rule for cleaning a clam is to create a temperature difference of for it. For example, to clean the carcass of frozen squid, you need to pour boiling water over it, while freshly boiled squid needs to be poured with ice water.

Now you know how to peel frozen squid. It’s time to learn how to cook them.

• Only fully thawed carcasses can be cooked.For defrosting squid, it is recommended to fill it with salted cold water.
• The first rule of clam cooking is , do not subject it to shock temperatures of . If you boil it, the water should not boil. Simmer – the contents of the pan should not boil. If you cook the carcass for more than 2 minutes, it will turn into a rubber eraser. As soon as the meat turns white, it must be immediately removed from the boiling water.
• In case the meat is still overexposed in boiling water , the cooks have a secret: continue cooking for another 40-50 minutes.It will not become completely soft, but it will still work to chew it.
• Clams are boiled for salads, but you can stew them in sauces or wine, fry in a pan or grill and bake.
• Carcasses and tentacles are ideal for stuffing . They are stuffed with anything: cheese, rice, mushrooms, nuts, tomatoes.

90,000 Clear squid fast? Easily! How to clean a squid for cooking correctly. Fast cleaning frozen carcass

Why are sea mollusks useful?

In general, if you have this product from the category of “rare guest” in your diet, urgently correct yourself: squid meat contains iron and potassium, iodine, zinc and selenium.

It contains no cholesterol at all, but a lot of protein.

Caloric content is relatively low – 100 kcal per 100 grams
(the number of kcal varies depending on the method of preparation).

Dishes with squid are a high-quality “building” material for muscle tissue, which has a general strengthening, anti-sclerotic, vasotonic effect.

Eating this sea mollusk removes toxins and salts of heavy metals, improves digestion and supports the endocrine system (especially the thyroid gland).

Usually, this product is rarely used by those housewives who do not know how to peel squid, which part to eat, or some other dish. There are, of course, difficulties, but their minimum! It is worth doing everything once and then all that remains is to wonder why he could not do this before!

How to peel calamari from film: basic methods

There are 3 main ways to cope with the film on the carcass – peel without heat treatment and apply blanching, pre-boiling.

Cold method

Take a fresh or quick-frozen carcass in your hand and pull off the film with a “stocking”.

If the film is not peeled off with a quick motion, you can peel it off a little, pulling it off with a smooth motion.

After removing the film, the entrails of the sea animal and the chord (chitinous resemblance of the spine) are removed.

The carcass for this method must be headless.

Hot method

If the method of freezing is unknown, especially if the squid thawed and froze again during storage, or was covered with ice, or was crumpled and deformed, then the “stocking” cleaning method does not suit him.

These shellfish should be placed in a heat-resistant colander and immersed in boiling water for 7-10 seconds. Then take it out and immediately immerse it in ice water. In most cases, the film will wrinkle and peel off on its own. Sometimes you will need to do a little work with your hands and remove its remnants from the carcass.

Boiled squid cleaning

If the squid was boiled in a film, then to remove it, you need to slightly cool the carcass.

You can then use a new soft kitchen brush.

It is enough to rub the carcass a little, and the film will collect into balls and peel off.

Experienced cooks do not like to use this method – the taste of the finished seafood deteriorates.

How to peel fresh squid

If you are lucky enough to get a freshly caught mollusk, then you need to clean it right away. The process diagram is simple:

1. We hold the whole carcass well with one hand, with the other tightly grasp the head just behind the eyes and confidently pull it out – in one hand the body with fins remains, and in the other – the head with tentacles and entrails:
2. we cut off the tentacles, discard the rest (eyes, entrails, the longest “mustache”).Carefully with the beak – it can remain with tentacles, remove it, they do not eat it;
3. we free the carcass from the remaining viscera and the chitinous core – we just pull it out by hand;
4. shrink the film under running water.

Clean frozen whole carcasses

To clean the squid, it must be defrosted.

The best defrosting method is gradual, gentle.

For this, the carcass from the freezer is transferred to the refrigerator compartment.

When it thaws, move it to room temperature and keep it until it is fully restored to normal.

It is unacceptable to defrost this seafood by steam, in water or put close to heating appliances. Such “barbaric” methods irreversibly degrade the taste, smell and structure of squid meat.

We clean the same as freshly caught. After – rinse the carcasses with water and lower them in boiling water.

The duration of stay in boiling water depends on further actions.

If, after scalding, it is immersed in ice water, then a 10-second blanching is left. Carcasses removed from cold water can be easily cleaned by hand. This method is reliable, but squid peeled with it is not as tasty.

If the squid will be cleaned immediately after taking it out of boiling water, then you need to keep it in the water for about a minute. The film is carefully cleaned with a brush. The meat of the squid peeled in this way is juicier after cooking.

The easiest and fastest way to clean

Put frozen carcasses in a bowl, pour boiling water for a couple of minutes, then put them under a stream of cold water and clean them with your hands from the film, chord and entrails.

This method is really quick and easy. Its only drawback is that the squid become less juicy and aromatic, they become hard.

It is possible to use such a “shock” method only when there is an acute shortage of time for gentle defrosting.

It is very difficult to find a fresh carcass in city conditions, and therefore one has to be content with frozen one.

• Carcasses should be evenly frozen, not frozen to each other, but freely separate from one another.When shaken, two or more carcasses emit a dull thud.
• The carcass can only be white. A yellowish color indicates a violation of storage conditions.
• The smaller the carcass, the younger the animal, which means that its meat is more tender.

Most often, squid is boiled with roots and spices as an independent snack dish; fried with onion rings under a lid, stewed with onions and garlic in butter.

Useful video

I propose to see how to remove the film from squid easily and quickly:

Squid, like all edible ocean dwellers, are low in calories and high in protein.Unfortunately, they are not frequent guests at our table for one simple reason: the hostesses do not know how to clean squid at home. It’s a pity, because their meat is also dietary
, because there is practically no fat in it. With our tips, you will not only learn how to clean these ocean dwellers, but also pamper your loved ones with unusual snacks.

How to quickly, easily and correctly peel calamari from the film according to step-by-step instructions

Inventory:
large bowl or saucepan, knife, kettle.

Ingredients

How to choose squid

• When buying, do not chase the size
  : The smaller the shellfish, the more tender and tasty it is. Carcasses up to 20 cm long are considered small. Too large ones have a pungent ammonia odor, which cannot be completely eliminated.
• Refined shellfish are several times more expensive
  . Often, they still have to be cleaned of films and internal cartilages. This means that it is more profitable to buy unrefined shellfish.

• It is not worth buying a product with a lot of ice in the package
  . Ice, as well as dark spots on carcasses, indicate repeated freezing and defrosting.
• Fresh squid color – cream
  , and the surface is free of cracks or breaks.
• Catch time – July and August
  . The shelf life in the original packaging is no more than 2 years.

Step by step instructions

Video on how to properly peel squid from film

In the video you can see how to quickly clean the squid from the film and entrails.The chef explains what to look for when cleaning different types of shellfish.

Secrets from the chef

• The first rule for cleaning a clam is create a temperature difference for it
  . For example, to clean the carcass of frozen squid, you need to pour boiling water over it, while freshly boiled squid needs to be poured with ice water.

Now you know how to peel frozen squid. It’s time to learn how to cook them.

• Only fully thawed carcasses can be cooked.For defrosting squid, it is recommended to fill it with salted cold water.
• The first rule of clam cooking is not to shock it
  . If you boil it, the water should not boil. Simmer – the contents of the pan should not boil. If you cook the carcass for more than 2 minutes, it will turn into a rubber eraser. As soon as the meat turns white, it must be immediately removed from the boiling water.
• In case the meat is still overexposed in boiling water
  , the cooks have a secret: keep cooking for another 40-50 minutes.It will not become completely soft, but it will still work to chew it.
• Clams are boiled for salads, but you can stew them in sauces or wine, fry in a pan or grill and bake.
• Carcasses and tentacles ideal for stuffing
  . They are stuffed with anything: cheese, rice, mushrooms, nuts, tomatoes.

• Squid contains phosphorus and fluoride for teeth. And there is so much protein that you can cook them instead of meat in fasting. – a wonderful dish for lovers of seafood delicacies.
• Seafood dishes are incredibly tasty, but expensive. Therefore, they are more often prepared for the holidays. diversify the festive menu and surprise guests and households.
• In addition to expensive seafood, there are readily available seafood. Meanwhile, you can cook it so delicious that you will buy it over and over again.
• Herring is another common fish. Many people know how to salt it, so it’s time to cook.
• Crab stick salad has already competed with everyone’s favorite Olivier.In order not to cook two salads at the same time, you can cook.

Before you try the gifts of the ocean, you need to learn how to properly cut them. Share in the comments if you managed to cleanse the sea clams with our advice?

How to clean squid? This is not an idle question for hostesses, who for the first time are going to pamper their household with this tasty and very useful product. Nutritionists advise including this clam meat in your weekly diet.

Fortunately, it is in perfect harmony with the side dishes of cereals and vegetables, it can be used to prepare many hot dishes and cold snacks. But before you cook these clams, you need to learn how to clean them correctly and quickly. This will be discussed in our article.

Choose the right squid

How to buy quality squid?

To buy good quality shellfish, you should pay attention to two points.

1. Shellfish carcasses must not be stuck together or frozen to each other.If it is impossible to separate them, in front of you is a product that has passed the re-freezing procedure.
2. The meat of quality squid should have an exceptionally white color. The presence of bluish or pinkish shades eloquently indicates that the color of the skin was absorbed into it during the thawing of the product.

Having found such a product on the counter, never buy it: you will be tortured with cleaning, and the taste will disappoint, and it may be unsafe for health.

How to choose squid – tips and an overview in the video:

Some housewives try to choose squid with larger and brightly colored carcasses.This is a fairly common mistake as these molluscs are old.

The meat of medium-sized and slightly colored sea inhabitants is more tender and tasty.

How to quickly and correctly remove the film from squid? Multiple cleaning methods

How to quickly remove the film from squid? There are several simple and extremely effective methods, having mastered which, the hostess will spend less and less time on this procedure every time.

Why is it necessary to free molluscs from colored and transparent films? So that the carcasses do not decrease in volume, and the meat does not become tough, since all these metamorphoses often occur due to the fault of the transparent film, which acquires special rigidity during the heat treatment of the product.

Cold clean

This technique can be used to clean either freshly caught or properly frozen squid. There is no need to apply any thermal effect here.

1. Taking the decapitated carcass, carefully separate the thin film and begin to gradually tighten it. Ultimately, it will disappear completely, leaving a semblance of a “stocking” in her hand.
2. Having cleared the skin of the mollusk, the entrails and chitinous plate (chord) are removed from it.

Hot method

How to properly clean frozen squid? Shellfish that have been frozen several times are best cleaned with a short heat exposure.

How to peel squid – video:

Let’s take a step-by-step look at the process of cleaning not decapitated carcasses, but whole squid (with a head and tentacles).

1. The shellfish should be thawed naturally, leaving it at room temperature for a couple of hours.
2. Gently pulling on the head, the entrails are removed from them.
3. Tentacles are cut off almost at eye level.
4. The squid’s hard beak, hidden among the tentacles, is not suitable for food. It is carefully removed and immediately checked for debris.
5. Be sure to remove the flexible spine, which resembles a narrow strip of transparent plastic.It is not difficult to find it: it is well felt inside the carcass.
6. After all these manipulations, the carcasses can be considered ready for removal of the film.
7. After rinsing the squid carcasses in a large amount of running water, they are dried with napkins.
8. Having poured boiling water into a deep container, one of the prepared carcasses is sent into it for a couple of minutes. During this time, the skin will separate from the pulp, but the meat itself will not have time to cook.
9. When exposed to heat, a thin film in boiling water will inevitably curl up.Taking the mollusk out of boiling water, it is cooled a little, after which the layers of the broken film are removed under a stream of cold running water. As a rule, the separation of skins treated with hot water occurs without problems.

Contrast shower method

You can quickly peel frozen squid carcasses using this simple method.

Boiled shellfish cleaning

Inexperienced housewives often have a question: when to peel squid – before or after boiling? It is perfectly acceptable to boil whole unpeeled shellfish carcasses, without preliminary cleaning.

• After boiling, they are slightly cooled, and then the film lining them is removed with a solid stocking.
• Sometimes the skin on mollusks, under the influence of hot water, bursts and curls up, forming a semblance of small balls. In such situations, a soft kitchen brush can help out. It is enough to rub the surface of the boiled mollusk with it, as there will be no trace of the remnants of the film.
• Most often pre-boiled shellfish intended for salad.

How to cook squid correctly?

Having learned to peel squid, they proceed to their culinary processing.The easiest way to prepare any product is to boil it, but it should also be done correctly.

Cooking seafood is not at all difficult, but you should know a few mandatory rules that must not be violated.

If the shellfish are boiled for too long, their meat will look like tasteless gum. The first sign that the squid is overcooked is a significant decrease in their original size. When boiling seafood, you need to look at the clock.

If shellfish are boiled separately, their maximum residence time in boiling water should not exceed four minutes. As part of complex vegetable side dishes, sauces or pilaf with seafood, it is permissible to subject them to heat treatment for half an hour.

The fastest way to boil squid

• Squids, in order for them to be soft, must be kept in a boiling broth for no more than 20 seconds: only under this condition will their meat acquire the necessary tenderness.
• To add a pleasant aroma, good chefs put a tea bag or half a lemon in a saucepan with boiling water for boiling shellfish.

How to quickly cook squid – video:

The second option for cooking boiled shellfish

• The water intended for cooking seafood is slightly salted, brought to a boil and flavored with dill and fennel seeds (finely chopped dill leaves can also be added).
• Prepared shellfish carcasses are sent to the bubbling brine and the flame is immediately turned off.
• After tightly covering the container with a lid, give the squid a quarter of an hour so that they can sweat in the brine.
• After that, the boiled shellfish are placed in a colander and cooled in a tightly closed saucepan.

How to boil squid for a light snack?

To prepare this dish you will need:

• Squid – 500 g.
• 1 orange.
• Tomatoes – 2 pcs.
• Fennel – 2 small heads of cabbage.
• Oil (olive).
• Juice of one half lemon and one orange.

Cooking method
:

1. Rinse squid that is well cleaned of films in running water.
2. Fennel is cut into neat strips.
3. After peeling the orange, remove all inner films from it.
4. In a saucepan of boiling salt water, lightly boil the fennel.
5. Add squid to fennel, bring the contents of the pan to a boil, then drain the broth.
6. Boiled squid and fennel are seasoned with olive oil, fruit juices, seasoned with spices.
7. Skin and seeds are removed from tomatoes, cut into even slices.
8. All the ingredients of the appetizer (squid, orange slices, tomato slices and boiled fennel greens) are beautifully placed on a painted dish. You can put a few large boiled shrimp on top.

Another recipe for cooking squid – in the video:

What delicacies can be made from squid?

The recipes for cooking squid in modern cooking are so diverse that they cannot be enumerated. We will only briefly describe the main methods of culinary processing.

The following dishes are made from squid at home:

How are fried squid prepared?

Before preparing this dish, the carcasses of the squid, of course, must be peeled. Do not abuse the use of spices, since the specific aroma of all seafood is very easily interrupted by the smells of other components of the dish.

The time for frying squid, as with all other methods of cooking them, should be minimal.

Crunchy squid in croutons

This extremely tasty and nutritious dish is simply irreplaceable during family holidays and friendly parties. He is credited with the properties of an excellent aphrodisiac.

Components:

• Squid – 0.5 kg.
• Eggs – 2 pcs.
• Bread crumbs.
• Sour cream-mayonnaise ice cream (consisting of equal amounts of mayonnaise and sour cream).
• A mixture of vegetable oil and butter for frying.
• Spice set.

How to cook
?

1. Carcasses peeled from films are cut into small strips or rings.
2. Prepare ice cream from a mixture of mayonnaise, sour cream and spices.
3. Slices of squid are dipped in ice cream and then thoroughly rolled in the breading mixture.
4. Frying is carried out for 4 minutes in a mixture made from cow and vegetable oil.
5. Place the fried rings on a paper towel to absorb the excess oil.
6. After that, the delicacy is beautifully laid out on a flat plate, decorated with herbs and served with pickled cucumbers.
7. Squid is prepared in a similar way in beer batter, in which egg whites, a small amount of flour and beer are placed.
8. This dish goes well with many types of sauces.

Fried squid rings in batter – recipe in the video:

Squid is a healthy and tasty seafood that can be used to diversify the daily family diet.Some housewives do not like to cook these clams, thinking that they are difficult to clean. It’s a delusion. Squids are easy to clean if you know the little secrets of their processing.

If you bought a fresh, whole squid, place it in a bowl and locate where the head is. Tentacles are located on it. Holding the body of the squid with one hand, pull the head towards you with the other. It will separate along with the entrails. Turn your head with tentacles towards you, find and remove the beak. Then remove the eyes. To do this, cut the tentacles in half, or simply squeeze the eyes outward.Remove films from the carcass. In fresh squid, it comes off easily in one go. Remove the tough chitinous plate that is inside the body. Rinse the cleaned carcass well with cold water.
More often it is necessary to butcher frozen squid. So that cleaning them does not take much time, choose the right product in the store. Frozen shellfish carcasses should be easily separated from each other. If they stick together, then the squid has already been thawed. When cut, they will creep, and after cooking, they will taste bitter.The size and color of a squid depends on its habitat and age. The body of an unrefined mollusk is covered with a film on the outside and inside. It can have colors ranging from pink to burgundy and purple. White meat is under the film. After re-freezing, the meat turns gray and loses its taste. Small squids are easier to peel than large ones and are softer after cooking.
Often gutted frozen carcasses are sold in stores. This makes them easier to clean. Remove the cartilage from the cut squid.Then remove the film from the carcass. If this is not done, during heat treatment, they will become tough, and the carcass itself will shrink. There are several ways to clean the film. Without defrosting the squid, place them in a bowl, scald with boiling water, and then immediately transfer to a bowl of ice. The skin will come off in a stocking. You don’t need to put the squid on ice, but simply pour boiling water over them and immediately drain the water. The film instantly rolls up and peels off easily.
To remove the skin from a thawed carcass, place it in a saucepan of boiling salted water and cook for 2 minutes.The film partially remains in the water, and the remaining film is easily removed by rinsing the carcass in cold water. After that, the squid is ready to eat. Its meat is soft and tender.

Peeled squid can be baked, boiled, fried, pickled, dried, smoked, minced. Do not deny yourself and your loved ones the pleasure of enjoying delicious dishes from this valuable seafood.

Squid is a delicious seafood, an excellent source of protein and iodine. However, many housewives think that they are too difficult to cut and clean.And in vain, because you just have to remember a couple of subtleties, and everything will work out!

How to quickly and easily peel squid

The whole squid carcass is covered with a film that needs to be removed. Why do this? The fact is that during cooking it becomes very hard, literally rubbery, and spoils the taste of the product. It is very easy to peel fresh squid from the skin, just grab the skin along the edges of the calf and pull it, it will come off as a so-called stocking.

Removing the film from frozen food

Squids that have been frozen are most often found on store shelves. The main condition for their successful cleaning: first, the carcass must be defrosted.
Then follow the instructions.

1. With one hand we hold the carcass tightly, with the other we pull by the head, removing the entrails.
2. The middle between the tentacles is inedible, cut it out and discard it.
3. Squids have a flexible spine – a chitinous plate. It looks like a thin strip of plastic and is easy to feel. This organ is unsuitable for food, so we remove it.
4. Now we have only the edible parts of the squid – the tentacles and the carcass.We prepare two containers: with boiling water and ice water.
5. Place the squid meat in boiling water for a few seconds and immediately transfer it to ice water. The film can now be easily removed from the carcass.
6. We clean the whole carcass, not forgetting about the tentacles.
7. Done! The squid is cleaned and you can start cooking.

How to peel and cut raw squid – video

How to remove the skin from a fresh carcass correctly: home secrets

There are several secrets to help you quickly remove the film from a squid.

1. Defrost the squid before carving. The film is practically not removed from the ice cream of the raw product.
2. Pay attention to the color of the carcass: whites without pink blotches are easier to clean.
3. Use a hard brush to remove the skin: rub the surface of the squid and the film will come off.

Thoroughly remove all entrails; they give the food an unpleasant taste during cooking.

90,000 How to wash linoleum in the kitchen? – All about the kitchen

How to wash old linoleum from stubborn dirt – the best means and methods

Linoleum is a practical, inexpensive, low-maintenance flooring material.But even this coating, which is resistant in all respects, loses its attractive appearance over time. Stains, scuffs, cracks appear on it. However, if you wash the linoleum with suitable products and take proper care of it, these problems can be avoided.

The main reasons for contamination of linoleum

One of the reasons for the appearance of persistent stains on linoleum is antiseptic drops

If the floor is not cleaned in time, the number of stains on it will gradually increase, and the coating will soon lose its original appearance.

The reasons for the appearance of contamination are different: ingress of brilliant green, iodine, rust and mold, food particles falling on the floor, dirt brought from the street, traces of synthetic dyes, grease, pens and felt-tip pen.

The kitchen floor usually suffers the most from grease stains and the hallway.

In case of improper use of the coating, the upper protective layer is erased on it. Because of this, the presentable look deteriorates, and it becomes more difficult to clean the floor.

How to remove different stains from linoleum

There are several ways to wash very dirty linoleum:

• Normal dust can be removed with detergents.Even white material can be cleaned like that. Add 100 g of grated laundry soap to a bucket of warm water. A cloth moistened with the resulting solution is wiped off the area of ​​contamination. Finally, wipe this area with a dry cloth.
• Grease stains or wax are removed with high heat. A folded paper or rags are placed on the contaminated area. The heated iron is applied to the pad, as a result of which the fat is melted and absorbed into the underlay material.The remains are removed with turpentine. With this method, it is necessary to ensure that the area of ​​the pad is larger than the surface of the iron.
• Shoe strips and shoe cream can be easily removed with regular gasoline. A cloth moistened with this solution is used to wipe the problem area.
• Stains from brilliant green are removed with hydrogen peroxide or camphor alcohol. One of these means treats the contaminated area until the trail disappears.

A few drops of gasoline or kerosene can easily cope with stains from iodine, brilliant green, coffee, felt-tip pens, paint, traces of shoe polish or machine oil.They are applied to the stain, and after 5 minutes, this place is rinsed with water.

Linoleum can only be gasoline, which is sold in a hardware store. A gas station is not suitable for these purposes.

The Return of the Lost Shine

Special means for cleaning the floor will help to clean the linoleum and restore its shine

Using special detergents, you can remove the stain, but it is not always possible to restore the shine to the coating. It is not necessary to use substances with aggressive chemical composition for this.

Folk methods will also help to wash linoleum to make it shine. Here are some simple recipes:

• Milk . Mix it with water in equal amounts and treat the floor. At the end of the procedure, wipe the area dry with a cloth to obtain a lasting shine. The only drawback of this method is that the milk is quickly washed off and the procedure must be repeated soon.
• Starch . Mixing a couple of tablespoons of powder or potato tubers with water, you can easily restore the shine to the floor covering.
• Linseed oil . One of the easiest tools to clean linoleum to make it shine. A few drops are applied to the cloth, which is then wiped over the surface.

With the help of polymer mastics and polishes, the floor can be restored to its former shine after repair. These compounds also increase the protective properties of the coating by creating a thin film on it. They should only be applied to a clean surface.

Shine chemicals should be used no more than twice a month.Before using them, you must first clean the floor from dirt and dust.

What tools are useful for cleaning

Linoleum should be washed with a soft mop

Linoleum is easier to clean with special tools. To work, you should prepare:

• a mop with rubber inserts;
• doormat;
• broom or soft brush;
• vacuum cleaner;
• pumice stone or fine sandpaper.

Special detergents for cleaning linoleum and compositions for creating a protective layer are also useful: mastic, drying oil, polish, etc.It is not recommended to use strong chemicals, but in rare cases it is allowed.

Linoleum can be washed with a steam cleaner. This is a professional tool that greatly simplifies the work when you need to clean rough or embossed surfaces.

Safe chemicals for linoleum

Special products wash linoleum to shine without leaving streaks

When choosing a detergent, the main thing to pay attention to is safety.

Clean water is sufficient for daily cleaning.Specialized household chemicals should be used no more than once a week, having previously studied the instructions. Do not use powdered detergents, they may scratch.

It is convenient to remove grease deposits on the kitchen floor with laundry soap. And in order to quickly remove dirt and give shine to the coating, you need to apply drying oil. If nothing like this is at hand, you can wash the linoleum in the kitchen with ordinary dish gel, which removes grease stains well.

Products such as Mr.Proper, Mr. Muscle and others. The solution is added to water in the proportions indicated on the package and the floor is treated with a rag soaked in the composition.

Folk remedies for removing pollution

Self-prepared compositions will help to wash the stubborn dirt from the floor.

Soda and vinegar

Useful to get rid of brilliant green, iodine, markers and ink. Soda is poured onto the contaminated area, vinegar is dripped on top. A chemical reaction begins, the result of which will be a gradual discharge of pollution along with the foam.The remains of the composition are removed with a damp cloth. Repeat the procedure until the stain completely disappears.

Alcohol

Effective against grease and simply for regular cleaning of linoleum in the kitchen. Mix 1 part of alcohol or vodka and 5 parts of water. A handful of grated laundry soap is also poured here. In this composition, a rag is soaked, which is used to wipe the floor.

Sauerkraut juice

A small amount of the product is poured onto the problem area and left for a few minutes.After that, the floor is treated with a sponge and wiped with a damp cloth.

Any of the folk remedies is absolutely harmless, but quite effective, it helps to wash even old linoleum with ingrained dirt.

Linoleum care rules

After washing, treat the linoleum with a protective compound so that it shines and gets less dirty

It is important to properly wash the floor covering, this will help to extend its life. The care procedure consists of three stages:

1. dry cleaning with a brush or vacuum cleaner;
2. damp cleaning with cloth and detergents;
3. using different formulations to add radiance.

It is not allowed to clean new linoleum, which has just been laid, during the first 30 days. During this time, the product will completely smooth out and stop absorbing moisture from the external environment. During the first month, it is recommended to clean the coating exclusively with a vacuum cleaner.

You must also know the rules for caring for linoleum. For example, in order not to damage the material, you cannot move furniture over it: lift objects if you want to rearrange them to another place. Attach special pads to the legs.

Vacuum the floor before wet cleaning, and then treat it with a store-bought protective compound. To wash linoleum without streaks, use only warm liquid and soft fabrics.

To clean the dirt off the floor, these tips come in handy:

• Hot water makes it easier to remove stains. The higher the temperature, the easier and faster the liquid copes. However, after such a departure, the linoleum will soon be covered with bubbles and irregularities.
• Soda is an excellent cleaning agent, but lye is corrosive and erodes the protective layer.
• Do not use bleaching agents. Even in those situations when it comes to washing white linoleum, it is better to refuse solvents, bleaching compounds and chlorine-containing mixtures. They spoil the appearance of the coating and destroy its structure.
• No abrasive compounds can be used.

Compliance with these simple rules will significantly increase the life of the coating.

It is not difficult to clean dirty linoleum in the kitchen or in any other room. There are a lot of ways and means of both chemical origin and folk. The tips and tricks described above will help you deal with stains quickly, hassle-free and keep your floors in top condition.

Source: https://kliningovyj-raj.ru/uborka/cem-myt-linoleum/

How to remove fat from linoleum coating in the kitchen

The guarantee of linoleum cleanliness – compliance with the rules of daily use, frequent cleaning and the use of safe products to remove old greasy stains.Vinegar, alcohol-containing liquids, solvents and household products cope with such contaminants. Mastic and drying oil will help restore the original shine.

A kitchen is a room with conditions where greasy soot and deposits on the floor do not look unusual. If it is not possible to quickly remove the dirt from the floor before it has time to dry. Our tips will help you clean linoleum from grease safely without damaging it.

Basic recommendations for the care of linoleum

Linoleum, despite its versatility of application, does not have the most outstanding technical characteristics, therefore it requires a special approach during operation.

Without proper care, linoleum takes on a careless look

To a greater extent, this concerns the peculiarities of using and caring for such a floor covering:

1. Preference should be given to dry cleaning of the flooring to avoid blistering and water leakage in the cracks between the linoleum and the underlay. If it is nevertheless necessary to carry out wet cleaning, then it is allowed only after thorough sweeping of the debris.
2. Linoleum lends itself to pushing through the legs of furniture and household appliances.To prevent this, it is necessary to put on special rubber attachments with a larger area on the legs.
3. Rubber mats or thick fabric runners should be used in areas where the surface is most used (for example, near work surfaces where food is prepared).
4. It is advisable to immediately remove small debris from the floor, because when rolling it can scratch linoleum.
5. It is undesirable for direct sunlight to hit the coating – this color quickly fade.
6. Do not move household appliances, furniture and other heavy objects on the linoleum – it will be irretrievably damaged.
7. You cannot lay linoleum in rooms with a high level of humidity – the kitchen, by the way, is also not the most suitable place.
8. The most frequently used areas on linoleum can be coated with special compounds that protect the coating from wear and tear.
9. Any kind of dirt on the floor must be removed immediately with a damp cloth so that it does not dry out.

Daily cleaning of linoleum – the guarantee of its cleanliness

By the way, the same rules apply to the care of laminate flooring.

How to restore the shine of an old floor covering

Over time, even well-preserved linoleum loses its gloss, which is inherent only in a new coating. If it is not damaged anywhere, then there is no point in replacing it with a new one – it is enough to use improvised and household tools that will return it to its former shine.

From home folk remedies, you can use a weak solution of ammonia diluted in warm water.

Ammonia for making the coating shine

Use this liquid to wipe the floor and let it dry. In household stores, you can buy special polishes that, when applied, clean the surface and are absorbed into the upper layers of linoleum, returning it shine and making it indistinguishable from the new coating.

Linoleum treated with protective agent

Daily care products

To remove dry fine debris, you can use a soft broom or a mop-like brush.

Use soft brushes for cleaning

Regular wet cleaning ensures constant cleanliness and the absence of stubborn and well-dried stains. Wet cleaning should be carried out with warm water, for the greatest efficiency with detergents dissolved in it.

Liquid or gel-like soaps are best, or highly soluble powders (not a single grain should remain so as not to scratch the surface). After cleaning, the floor should be wiped well with clean water so that no streaks remain.

Cleaning should be carried out only with soft sponges or rags, in no case use hard brushes, metal sponges and other objects that will immediately spoil the appearance with deep scratches.

However, the popular melamine sponges are great for removing dirt from linoleum.

Products with a protective film effect

To protect linoleum from wear, you can treat its surface with a special acrylic-based liquid, which penetrates deeply into the structure of the floor covering and solidifies, forms a hard and wear-resistant layer with a crystalline structure.

Liquid with a film effect for linoleum

Usually such substances are used in areas with high traffic, protecting linoleum from physical damage and pollution. Usually, the liquid is applied in several layers at intervals of an hour.

Linoleum treated with such a tool is much easier to clean of any stains, because the contaminant is unable to be absorbed into the protective coating, but remains on top. Additionally, linoleum receives wear resistance, which exceeds the passport several times.

Material in the topic: Sparkling laminate – we care properly.

Eraser

The stationery eraser works great on old, dried, greasy stains that have hardened.

Stationery eraser removes grease stains

It is necessary to make some effort so that the frictional force acts on the plaque and it gives in to removal. The strips that remain after the eraser can be washed with a warm soapy solution.

Vodka

Vodka, like any other strong alcoholic drink, contains alcohol, which allows you to perfectly wash grease and other stains from linoleum in the kitchen.Moonshine or hand sanitizer will also work (beer will not work, there is very little alcohol there).

For cleaning, you can use a clean soft cloth, cotton pad or cotton swab, which should be soaked in vodka. The greasy stain on the linoleum should be wiped until the alcohol destroys the structure of the pollution and the dirt begins to pass into the fabric.

Pay attention! You may need to replace the rag or cotton swab if it gets too greasy. Wiping with a dirty rag threatens to further contaminate the linoleum.

Vinegar

Vinegar can be used in the same way as vodka by soaking it on a clean cloth.

Vinegar perfectly dissolves fat on linoleum

If the stain is large and very stubborn, you can pour vinegar directly onto it, making sure that the liquid gets as little as possible on the clean areas.

After the fat is removed, the washed area must be washed off with plain water to remove the remaining vinegar.

Tile cleaning liquid

Hard surface cleaning fluids such as tiles, tiles or porcelain stoneware contain ingredients that can deal with a wide range of contaminants without disturbing the structure of the surface itself.

An overview of home disinfectants will help you to find the right product.

They are capable of dissolving grease as well, regardless of the freshness of the stain. Typically, these products are sold in convenient dispensers with dispensers to dispense liquid to the desired surface.

It takes some time to react, after which the agent itself and the remaining fat are removed with a clean, dry cloth. To neutralize residual activity, the cleaned area can be washed with plain water.

Gasoline, kerosene, turpentine and other solvents

Thinners work well with any greasy stains. However, this activity does not always play into the hands, especially for linoleum, as not the most durable material (as well as silicone joints).

High purity gasoline

The main problem is solvent discoloration, delamination or swelling.

Advice! Before using solvents on a stain, make sure it is safe on an area of ​​the floor that is invisible to the eye in everyday life.

You can also try the liquid on a piece of linoleum, because surely after laying it, there were scraps left.

It should take 30–40 seconds to react with fat, after which the liquid is removed from the coating with a dry, clean cloth. After cleaning is complete, the floor should be wiped with clean water.

Bleach

It is categorically not recommended to use bleaches in the initial concentration, because their main property is discoloration, reviews on the application are not the best.

Mild bleach solution effectively removes grease

To try to dissolve fat, use very weak solutions and increase their concentration as necessary. Trial application on hidden areas of the floor or covering pieces is actual.

Mastic

Mastic is a construction fluid that is often used to clean dirty linoleum in the kitchen.

Mastic for linoleum

In parallel with cleaning, it gives the coating its characteristic gloss.It is also a very active substance and must be used with great care.

Drying oil

A safer way to clean the floor and restore shine is to treat it with linseed oil.

Drying oil for linoleum

It is enough to apply the liquid on the floor and rub it evenly with a clean dry cloth over the entire area. It is recommended to use it as a prophylactic agent for linoleum care every few months.

The video shows in detail how to safely clean the kitchen floor in various ways, as well as clean it from dirt.

Larisa, March 14, 2018.

on the channel Modern Housekeeping in Yandex.Zen

Save and share information on social networks:

Discussions are closed for this page

Source: https://sovremennoedomovodstvo.ru/lifehack/moem-linoleum-na-kukhne-ot-zhira/

How to wash rough linoleum in the kitchen: recommendations

Linoleum is one of the most popular floor coverings. Its popularity is due to its practicality and the ability to harmoniously fit into any interior.But the most important positive property of this flooring is ease of maintenance. And this applies not only to its smooth variety, but also to its rough one.

Of course, the latter, due to the presence of grooves, in which a lot of dirt accumulates, is a little more difficult to care for. But if you remember some of the features, you can safely solve the problem associated with the contamination of rough linoleum.

Manufacturers of rough linoleum claim that their products, which are produced today, have special protection.The special coating prevents dirt from penetrating into the structure. And, therefore, the washing process should not be too complicated. In the event that serious contamination forms, you will have to use a brush and a strong chemical.

Important! It is worth remembering that the surface of any linoleum, both smooth and rough, is sensitive to temperature and mechanical stress. His appearance and service life largely depend on how the owner of the apartment will treat him.

Preventive measures

The best way to combat dirt on linoleum is to prevent it from appearing.

• To prevent the formation of defects on the floor, it is recommended to treat the coating with drying oil at least once a month. The substance is first applied with a sponge and then rubbed with a soft cloth until the surface is dry. After such treatment, the floor will shine clean.
• To protect the floor from mechanical stress, it is recommended to put a grill or mat for cleaning shoes near the door.Thanks to this item, everyone who enters the house will be able to get rid of the pebbles stuck to the sole.
• Furniture items with sufficiently wide legs should be installed in the house. In this case, the pressure on the floor will decrease. For greater reliability, you can attach special protective stickers to the legs, for example, felt. But rubber stickers cannot be used for these purposes, since after them stubborn stains remain on the surface.

Important! It is necessary to protect linoleum from contact with hot objects, as well as from substances such as lipstick, alcohol, shoe polish.

• Do not move heavy furniture on the floor. If you need to move an object, then it should be slightly raised. You can also use rugs or castors.
• As soon as any stains appear on the linoleum, they should be removed as quickly as possible. Old stains are much more difficult to remove.
• When caring for linoleum, under no circumstances should you use abrasive products that bleach strong chemicals.
• Linoleum must be reliably protected from low temperatures and sunlight.Otherwise, it will quickly lose its color and collapse.
• When linoleum is still new, it needs to be cared for only with a dry method.

It is impossible to clean rough linoleum with just one sponge. After all, a lot of dirt collects on it due to the embossed surface. This requires a special approach.

1. Soap solution

The main working tool in the maintenance of linoleum is a brush. It should have soft bristles. And the detergent can be made at home.Cooking requires regular soap and water. Dissolve 100 g of soap in a bucket of water. In the resulting solution, you need to moisten the brush, and then process the surface of the linoleum.

Do not press too hard or the finish will be damaged. Alternatively, you can simply pour soapy water over the entire floor and leave to soak for a while. When washing rough linoleum, try to move the fabric over the surface in the direction of the pattern. Otherwise, all the dirt will remain on the floor.

Important! It is best to remove any moisture remaining on the floor with a special microfiber mop. And after removing moisture, you need to rinse the floor again using warm water.

The soap solution above is the most effective, but time consuming. Therefore, owners of such floors often resort to a different method. To care for rough linoleum, you can use a washing vacuum cleaner.

But this requires special rotary attachments.Not all models have these. The most popular, well-established brands are Karcher, Thomas, Zelmer, Vax, as well as a robot vacuum cleaner called iRobot Scooba 450.

Having any of the above or another vacuum cleaner equipped with special rotary attachments, you need to prepare a detergent solution, pour it into an appropriate container, and then proceed directly to cleaning. It is carried out very simply. You just need to carefully clean the surface in strips.If you wish, you can wipe the floor first with a damp cloth and then dry.

Rough linoleum can be washed even with plain water, without diluting any soap or any other chemicals in it. But this can only be done if cleaning is carried out daily. However, even in this case, you will need to add soap to the water every two weeks.

It is also quite difficult to polish rough linoleum. This can take a long time. Therefore, owners of such floors often turn to professionals for help.

Most often, spots on rough linoleum appear when it is laid in the kitchen. After all, here every day drops of fat fly in different directions. In addition, a lot of garbage quickly appears in the kitchen. That is why this type of coating has to be looked after daily.

If the owner is not ready for this, then he should generally refuse to install such a floor. The complexity of cleaning largely depends on the texture of the pattern on the rough linoleum.It should be understood that if it is small, then you have to make more effort than in the case of a large drawing.

Therefore, if you do not want to spend a lot of time on caring for the floor covering, it is better to immediately try to choose such linoleum, on the surface of which there will be much fewer places where dirt can clog. It is also possible to reduce the number of problems that arise during the operation of rough linoleum, if you seriously approach the choice of color.

Important! If you choose the right shade, the resulting dirt will be less noticeable.Therefore, the frequency of cleaning can be reduced.

It is not difficult to care for ordinary smooth linoleum. But if there is any relief pattern on the surface, then you have to put more effort, carry out cleaning more often and at the same time be careful. For cleaning rough linoleum, the same methods will not work as used to remove dirt from a smooth floor covering.

There are two main ways to wash textured linoleum.One of them is based on the use of a brush and soap solution. And another way is to use a washing vacuum cleaner equipped with special rotary nozzles.

Source: https://nyamkin.ru/advice/kak-otmyt-shershavyy-linoleum-na-kuhne-rekomendacii

How to wash linoleum in the kitchen: how to clean dirty linoleum on the kitchen floor

The word “linoleum” comes from the Latin “linum” (“linen, linen”) and “oleum” (“oil”) and literally sounds like “oiled linen”.It has been used as a floor covering since 1763. It was made from cloth, resin, wax and oil. Limestone, jute and cork chips are added to the modern natural covering – marmoleum.

Linoleum is a practical and budget option for kitchen flooring. He is not afraid of moisture, sunlight, mechanical stress. But any linoleum, both natural and synthetic, inevitably gets dirty and loses its original appearance. To figure out how and what to wash linoleum in the kitchen, our article will help you.

Basic rules of care

With improper care, linoleum will lose its appearance, and possibly deform.

Basic nuances of wet cleaning:

1. The first wet cleaning is carried out two weeks after laying the coating, not earlier. Until then, it is best to vacuum dry.
2. The floors are washed with the addition of soap powder or dishwashing liquid. The detergent must be completely dissolved in water. The soap solution cannot be left on the linoleum for a long time – the soap can damage its top layer.
3. First, wipe the surface with a woolen cloth soaked in warm soapy water, then rinse off the soap with cold water and wipe with a dry cloth.

Attention! Do not use hard brushes or sponges – they can scratch the top layer.

How to wash linoleum in the kitchen so that it shines?

For this, use special products for linoleum:

1. Versatile inexpensive products such as Mr.Muscle “,” Mr. Proper ”,“ Help ”,“ Glorix ”,“ Sanfor ”for floors,“ Stork ”,“ Progress ”, remove fresh stains and dirt, dissolve dirt in the pores of linoleum and strengthen its protective layer. When used as a solution or concentrate according to the instructions, they do not leave streaks. The solution is applied to linoleum, then washed off with clean water and the coating is wiped off with a dry flannel or microfiber cloth.
2. Rico Clean, HG, Mellerud – specialized products for cleaning linoleum. They are used to combat stubborn stains and heavy dirt.They give linoleum a shine and create a protective coating.

Choose a natural linoleum cleaner with particular care. The instructions should indicate that the product can be applied to the marmoleum. This coating is sensitive to solvents, acids and alkalis. Gentle agent for marmoleum – “Forbo 888”, it is used in the same way as other detergents.

Forbo 891 is used for general cleaning, which is carried out in three stages:

1. The cleaner is added to the water in the required amount depending on the contamination, applied to the floor and left for 10-15 minutes.
2. After this time, rub the stains with a sponge and rinse the entire floor with a solution of water and detergent (a cap of the cleaner on a bucket of warm water). Then rinse the floor twice with clean warm water.
3. Final stage – application of Forbo 898 polymer mastic. Spread it evenly over the floor with a clean cloth or a special mop. For a brighter shine, the mastic is applied in two layers (the second – 30 minutes after the first). Then it is advisable to let the mastic dry for another half hour, not to walk on the floor.After such care, the marmoleum will look like new.

Important! Use all linoleum care products strictly according to the instructions.

How to clean linoleum in the kitchen from all kinds of stains

For stains on linoleum, use various household chemicals or improvised means that are in every home. The principle of operation is the same in all cases: a cleaning agent is applied to the dirt, after which the floor is washed first with soapy water and then with clean water and wiped with a dry flannel.

What is used for this:

1. Grease, including stubborn ones, is washed off with dishwashing detergents. Before use, the composition is diluted with water until foam is formed.
2. Traces of asphalt, rubber or bitumen, felt-tip pen, pens or paint, coffee or iodine stains, rust can be washed off with petrol, turpentine and kerosene. Before starting work, it is necessary to check the effect of the liquid on a small inconspicuous area of ​​linoleum, otherwise you can damage its top layer and erase the drawing.
3. Use an eraser to remove dark streaks from shoes and rubber . They just need to be wiped off the linoleum and washed with an all-purpose detergent.
4. Stains from ink, felt-tip pens and brilliant green are removed with salt and vinegar. First, the stain is sprinkled with salt, then moistened with vinegar. After a few minutes, the salt is removed and the linoleum is washed.
5. Ice will help to remove the chewing gum from the floor, which must be put on the gum, cover with a cloth so that it does not melt quickly, and after 10 minutes remove the gum from the floor with a knife or spatula.
6. Iodine stains are wiped off with a damp cloth with potato starch.
7. Mold is removed with chlorine-containing substances, which are applied to the linoleum on both sides, after which it is dried.
8. Fresh oil and alkyd paint stains can be removed with sunflower oil. Old stains are removed with a solution of 20 g of laundry soap, 20 g of soda and 1 liter of warm water. Another option is “646” thinner, which penetrates under the paint, after which it can be easily removed with a spatula.
9. Scotch marks can be removed with a glass cleaner or alcohol.
10. Pet urine is removed with vinegar, vodka or lemon juice diluted with water in a 1: 1 ratio.

Care of embossed linoleum

Embossed linoleum is beautiful, practical and not slippery, even if you spill water on it, but it is more difficult to take care of it than usual because of its texture. When washing the floor with a rag, you need to move along the direction of the pattern, otherwise all the dirt is removed from the rag by the texture and remains on the floor. There are two solutions to this problem:

1. You will need a special cleaner and a mop with a brush. Remove the fabric coverings and apply enough water and detergent to the floor and scrub the linoleum with a brush, then collect the water with a microfiber mop and rinse the floor again with clean warm water.
2. Washing vacuum cleaner. Most popular brands: Karcher, Thomas, Zelmer, Vax, Arnica Hydra Rain Plus, Krausen Eco Plus and the robot vacuum cleaner iRobot Scooba 450 “.After the washing solution is poured into the container, you need to carefully clean the entire surface of the linoleum in strips. If desired, wipe the coating additionally, first with a damp cloth, then with a dry cloth.

Conclusion

Caring for linoleum with conventional or special detergents takes place in three stages. First, remove stains with household chemicals or improvised home remedies. Then the floor is washed with a solution of water with detergent and a mop or a cleaning vacuum cleaner. After that, the coating is washed with clean warm water and wiped with dry flannel or microfiber.

After drying, a polish is applied to the floor to create a protective layer on the linoleum and give it a shine.

Source: https://rem.ninja/kuhnya/uhod/kak-i-chem-myt-linoleum.html

How to wash linoleum to make it shine: detergents, tips

Linoleum is one of the most affordable and easy-to-use floor coverings. It does not absorb water like parquet or laminate, and it is not as difficult to remove stains as, for example, carpet.However, such an unpretentious coating has its weak points. Knowing them and following simple rules, you can keep your floors in excellent condition and significantly extend the life of linoleum.

This type of flooring, like linoleum, is very unpretentious, but it also has weak points that you need to know about

You can ruin a new coating very quickly if you choose the wrong cleaning agent. How to avoid irreparable mistakes, read our article.

Precautions

It is impossible to wash linoleum with products that contain insoluble particles.Of course, abrasive substances help to quickly remove dirt from the surface, but at the same time damage it. Linoleum usually has a protective film, and if its integrity is broken, the coating becomes more vulnerable to dirt and quickly loses its appearance. The floors after such treatment will never shine again, since the surface will no longer be smooth.

For the same reason, before washing the linoleum, it is recommended to dry the premises. It is especially important to get rid of small pebbles and sand that enter the house from the street.In front of the doors to the apartment, it is better to lay a rug with a hard surface on the outside to reduce the amount of debris that can scratch the floor.

Before you start cleaning the floors, it is recommended to dry the premises

It is forbidden to use hot water when washing linoleum, as the coating may deform. Various potent agents, for example, whiteness or bleach, can cause irreparable harm to the floor. You also need to stop using soda dissolved in water and other alkaline solutions.

An important rule is not to use products containing insoluble particles for cleaning linoleum floors

How to properly wash linoleum

It is better not to wash the new, just laid linoleum for the first time. Exposure to moisture can lead to deformation of the coating, which should “sit back” for several weeks. At this time, garbage is removed with a broom, broom or vacuum cleaner, and dust is removed by wiping the surface with special napkins.

In all other cases, it is allowed to wash linoleum as often as necessary.Water does not damage the surface, therefore, in case of heavy contamination, it is permissible to use a large amount of liquid.

Linoleum may be washed with plenty of water and as often as necessary

What is the best way to wash linoleum? To improve cleaning efficiency, you can add linoleum detergent or all-purpose detergent to the water. There are also special concentrated care compositions that form a protective layer on the surface that repels dirt.

Do not mix several types of products – the resulting mixture can seriously damage the surface.

Linoleum can be washed by hand, using a mop with various attachments or a washing vacuum cleaner. The surface of the nozzles and washcloths must be made of delicate materials that cannot damage the surfaces. To prevent streaks on the floor, after wet cleaning, the linoleum is wiped with a dry, clean cloth.

You can wash linoleum by hand, with a mop with various attachments or using a washing vacuum cleaner

Over time, even with careful maintenance, the floor surface wears down and fades.How can linoleum be washed to make it shine at home? Folk remedies will help – milk and potatoes . Milk is diluted with water in a 1: 1 ratio. Such a solution can easily be replaced by water with the addition of a small amount of potato starch or decoction of potatoes .

Additionally, the floor can be wiped with polish or special linoleum care liquid . Flaxseed oil has similar properties. The effect after using the natural remedy will be no worse – a well-groomed look and shine are provided.For maximum results after the procedure, you cannot walk on the treated floor for 15-20 minutes. Care must be performed at least once a month.

When linoleum is heavily soiled or has accumulated a large amount of grease, a soap solution is suitable for washing. For example, you can add a little dish detergent and alcohol to a bucket of water. Kitchen floors are often cleaned by dissolving a small amount of detergent or laundry soap in water.However, it should be remembered that such a solution can leave behind streaks. To prevent this from happening, the floor is washed several times with clean water and wiped with a dry cloth.

If disinfection is necessary, it is better to refuse strong chemicals. In this case, linoleum is washed with with a solution of vinegar or vodka , which will not only remove microbes, but also give a shine to the surface.

How to wash tough stains

Very often black stripes from shoes can be seen on linoleum.Rubber draws on a soft surface like a pencil, and getting rid of the “drawings” is not easy, as they quickly eat into. An original and effective way to deal with such spots is a tennis ball. It works like an eraser: you need to rub the black stripes properly and they will disappear.

Tough stains should be removed as quickly as possible, while the pigment is not strongly absorbed into the linoleum surface.

Stains of iodine, brilliant green, coffee, felt-tip pens, paint and food coloring, traces of shoe polish or machine oil can be removed from linoleum with a few drops of gasoline or kerosene.They are applied to the stain for 5 minutes and then washed off with plenty of clean water. Gasoline must be refined, and it must not be purchased at a gas station, but at a hardware store.

Traces of markers and paint are removed with refined gasoline, black stripes – with a tennis ball

Consequences of repair

Those who, during the renovation, cover the floor with old newspapers or film, do the right thing. If the linoleum is damaged, you need to do the following:

• Perform dry cleaning by collecting all debris;
• to clean the drops of plaster, putty or cement adhering to the surface with a spatula;
• Wash dirty stains with a rag, changing the water several times;
• Replace the cloth and wipe the floor clean.

If the linoleum is heavily stained with whitewash, add liquid dishwashing detergent to the washing water. After the original color has been restored, it is imperative to rinse the floor with clean water. If the white marks are heavily eaten in, you can use Mild Vinegar .

To wash the stain from the primer, a vinegar solution is also applied to it and left for a few minutes. You can also use nail polish remover , which contains acetone.Both the one and the other means should not be left on the spot for a long time, so as not to damage the color.

During repairs, cover the linoleum with old newspapers or foil – this way you will have to clean it less later

Now you know how to wash linoleum so that it shines and delights you with its impeccable appearance for a long time.

We offer for viewing a video on the topic of the article:

About the author: Natalia Mironova

In the past – a successful lawyer who radically changed her lifestyle.In the new role of wife and mother, the ability to highlight the main thing and “put everything on the shelves” remained unchanged. I am always ready to share my discoveries and accumulated experience.

Found a mistake? Select the text with the mouse and press:

Did you know that:

Stretch ceilings made of PVC film are capable of withstanding from 70 to 120 liters of water per 1 m2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don’t have to worry about leaks from the neighbors on top.

Threads made of gold and silver, which were used to embroider clothes in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the state of the necessary fineness. Hence the expression “pull (breed) gimmick” – “engage in long monotonous work” or “delay the execution of the case.”

If the first signs of bearing in the form of untidy pellets appeared on your favorite things, you can get rid of them using a special machine – a shaver. It quickly and efficiently shaves off clumped fabric fibers and makes things look worthy.

Plates and cups are not the only things that can be washed well in the dishwasher. It can be loaded with plastic toys, glass shades of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

Fresh lemon is not only suitable for tea: clean the dirt from the surface of the acrylic bath by rubbing with half a cut citrus, or quickly wash the microwave by placing a container with water and lemon slices in it for 8-10 minutes at maximum power.The softened dirt will simply be wiped off with a sponge.

The habit of using the washing machine “sparingly” can lead to an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on the inner surfaces and actively multiply.

Before removing various stains from clothes, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the thing from the wrong side for 5-10 minutes.If the material retains its structure and color, you can move on to stains.

It is easiest to remove scale and carbon deposits from the soleplate with table salt. Place a thick layer of salt on the paper, heat the iron to maximum, and press the iron several times over the salt mat using light pressure.

There are special traps for fighting moths. The pheromones of females are added to the sticky layer with which they are covered, attracting males. Sticking to the trap, they drop out of the reproduction process, which leads to a decrease in the moth population.

Source: https://hozpedia.ru/chem-myt-linoleum.html

Sparkling floor: all the ways to clean linoleum in the kitchen

Linoleum in the kitchen is exposed to great dangers: ingrained dirt, stains from food and drinks, greasy marks and stains are not easy to remove, but for a good housewife there are no desperate situations.

Safety precautions when cleaning linoleum

How to clean linoleum in the kitchen without harming it? The most important rule is that stains must be removed immediately, before the contamination is deeply ingrained.At the same time, very hot water is contraindicated for linoleum – it is best to immediately wash the floor with warm water and laundry soap.

It is not worth experimenting with combining several cleaning agents that can react destructively to the floor covering.

The use of baking soda is not recommended as it can make the surface too brittle.

Important! Abrasives can scratch the top coat and damage its appearance.If you nevertheless decide to clean the linoleum with a dangerous composition, try it in a small area, for example, behind a door or under a cabinet.

How to wash linoleum from all kinds of stains?

• Very dirty linoleum is washed with warm soapy water with the addition of 2 large spoonfuls of ammonia per bucket of water.
• Stains from shoe polish or wax can be removed without leaving a trace from linoleum by first scraping off the frozen mass and then wiping the stained area with a cloth soaked in gasoline or kerosene.They also work great on coffee or iodine stains. Do not forget to rinse the treatment area well with water at the end of the process.
• Ink stains can be removed with a hard sponge dipped in linseed oil. In the absence of linseed, you can rub the stain with any other vegetable oil.
• Bleach works well with rust stains when mixed 1 to 10 with water. For best results, treat the stain with concentrated lemon juice.
• Fresh grease stains can be easily removed with a dry soft cloth: it absorbs most of the fat, and residues are removed by washing with soapy water. How to wash linoleum in the kitchen from fat if the pollution is already firmly embedded in the material? Use a dish detergent to start with. Probably, this will be enough, but, as a last resort, you can clean the linoleum in the kitchen from fat with the help of turpentine, after rinsing the floor well after it.
• Stains from “brilliant green” are removed very poorly, the success of this event is directly proportional to the freshness of the stain. In the fight against this solution, such agents have proven themselves as nail polish remover, ammonia solution and hydrogen peroxide.

By the way, we wrote in more detail about how to remove green stains from linoleum in the article earlier.

• Light linoleum requires more careful maintenance, because the smallest dirt on it is perfectly visible.You can wash such a coating with a soapy solution with the addition of vodka or alcohol. Pour 200 g of vodka or a few tablespoons of alcohol into a liter of water, as well as a spoonful of any liquid detergent.
• Dark charcoal or graphite stains can be removed from light linoleum with chalk, rubbing and slightly dampening. The resulting gruel should be applied to the stain, left for 1 hour, then rinsed with clean water and allowed to dry well.

Types of professional linoleum cleaning products

If the contamination is not removed with improvised means, there is only one way – to the store, for special weapons of struggle.

The choice of such tools is quite wide, but they all have one drawback: they must be applied in strict accordance with the instructions, otherwise, at best, no effect will follow, and at worst, you will encounter a change in the color or structure of the top layer of linoleum.

All linoleum care products are subdivided into:

1. Means for daily cleaning of linoleum

They successfully remove fresh dirt and do not contain aggressive compounds.Typically, these gels and liquids smell good and do not require any special precautions.

Numerous brands present similar products, which vary in volume and price, but do the job equally well.

The table shows the most popular of them.

91,759 RUB 350

2. Stippers

Stippers are means for deep cleaning of linoleum. They are used for periodic, general floor cleaning or cleaning linoleum after renovation.

Aggressive alkali predominates in the composition of these substances, which dissolves almost any stains and even small scratches on the top layer of linoleum.Unfortunately, the surface of the material also gradually becomes thinner.

Such processing requires special equipment, and after it you need to restore the surface of the linoleum with a special protective agent.

Stippers mainly use clearing companies in their work.

3. Means that create the effect of a protective film

Products that create a protective film effect on the surface.
These include, for example, wax polish for linoleum ACL-4000, as well as other emulsions, mastics, varnishes and polishes.After using such products, the floor in the kitchen takes on a radiant and deep shine.

Thus, there are many ways to clean linoleum in the kitchen and return it to its original, brilliant look.
And yet, it is better to eliminate stains and dirt in a timely manner, so as not to resort to radical methods and not waste your time looking for effective remedies.

– tips

Source: http://obuborke.com/otmyt-linoleum-na-kuxne/

How to remove stubborn dirt from linoleum: a review of effective tools and techniques

• Design & Decor
• Cleaning

1 star 2 stars 3 stars 4 stars 5 stars We will tell you what means can be used to wash heavily soiled linoleum, how to get rid of different types of stains and what should not be done so as not to damage the coating.

ShutterStock

The floors in the house must be clean. But this rule is not always simple and easy to follow. Even the most unpretentious flooring is difficult to clean if you forget about regular cleaning for a while. We will figure out how to clean linoleum from ingrained dirt and how to properly care for it.

All About Cleaning Linoleum

Cleaning rules
What not to do
Cleaning methods
Removing stains
Cleaning the embossed cloth

Rules for cleaning flooring

In order for the material to retain its attractiveness as long as possible, it must be properly looked after.

Steps for Correct Cleaning

1. We remove debris and dust from the base. We clean with a vacuum cleaner. If it is not there, moisten a broom in water, gently shake off excess moisture. We sweep the debris in one direction. Then we remove it.
2. Prepare a cleaning solution with a neutral soap solution. Warm clean water is sufficient for daily cleaning. We wet a rag in the liquid, wash the coating. Wipe dry.
3. Wipe the linoleum with a polish paste. It can be a store-bought mastic or a homemade product.For example, a 1: 1 mixture of water and milk.

It is easier to clean the floor with a warm detergent solution. It removes dirt better, because under the influence of temperature, they dissolve faster. Do not use hot liquid. It works effectively, but at the same time spoils the structure of the material.

It can become covered with irregularities and bubbles.

In pursuit of cleanliness, we must not forget that the surface can be irreparably damaged. Therefore, before cleaning, it is advisable to determine which material is to be processed.Each of the varieties has its own prohibitions. So, natural marmoleum does not tolerate alkali in diluted or pure form. It becomes brittle. But it can be treated with acid-containing preparations. On the contrary, PVC and vinyl chloride sheets are destroyed by acid, but they carry alkali.

In any case, start cleaning with a new product from an inconspicuous small fragment. Testing is carried out. If the surface does not collapse after a while, you can safely clean it.The appearance of stickiness and stains is considered to be signs of material deterioration. The protective layer dissolves and becomes rough. It is important to choose a mixture that will effectively clean the dirt and will not damage the panel.

Chlorine-containing formulations are also prohibited. Even if you really want to remove a stain from a light coating, you cannot use chlorine. He will destroy the base. Abrasive powders and mechanical abrasives are prohibited. They scratch the protective film, leaving grooves and roughness. This spoils the appearance of the coating.Over time, dirt gets into them and eats. Removing it from there is much more difficult.

The scratched surface cannot be restored.

To quickly wash linoleum in the kitchen from fat, you need to choose the right detergent composition. The easiest way is to use household chemicals sold at any hardware store. There are special preparations for this treatment. This is Mr. Muscle, Mr. Proper, Amway Zoom and similar formulations. They are used strictly according to the instructions written on the packaging.Dosage changes are not recommended. Streaks and streaks may remain.

Universal detergents such as “Progress”, “Aist”, “Drop”, etc. work well. You can use household or any liquid soap. The selected drug is diluted in small quantities in water. The surface is washed with the resulting solution, then rinsed and wiped dry.

Cleaning with soapy water does not always give the desired result. In this case, it is necessary to move on to the use of more effective techniques.But this must be done gradually, starting with the weak, so as not to spoil the cloth. It must be understood that aggressive agents not only clean, but also gradually destroy the protective layer of the finish. Let’s list how to wash linoleum from dirt at home and in the office.

What can be used, except for special equipment

• Mixture with alcohol. Mix water and alcohol or vodka in proportions of five to one. Laundry soap is rubbed on a grater. Add about a handful of shavings for 7-9 liters of liquid. Stir vigorously until a homogeneous mass is obtained.They collect it on a sponge and apply it to the contaminated fragments. You can leave it there for a while to dissolve better. Good for stubborn fat and grime.
• To enhance the effect, you can prepare the following remedy: dilute a little liquid for dishes in a bucket of clean water, add a few drops of ammonia, stir. The mixture washes away fat well.
• Kerosene or gasoline. Dissolves greasy stains, but may ruin the surface. Therefore, they first try on an inconspicuous fragment.A cotton pad is impregnated with the drug, the dirt is gently rubbed without effort. Then wipe with a soapy sponge, rinse.
• Drying oil. Pour a little liquid on a rag, treat dirty areas. The drying oil is allowed to dissolve the impurities. Rub the cleaned surface with a clean flannel until it shines. Even if the floor is clean, the masters recommend that such treatment be carried out every three to four months. Linseed oil restores the elasticity of the material, prevents cracking, restores its shine.
• Sauerkraut brine.One of the best folk remedies for dirt, even the most stubborn one. Problem areas are abundantly moistened with brine. Leave in this form for a short time. You have to be careful because the juice contains acid, albeit in small amounts. The soaked dirt is wiped off with a sponge, the floor is washed, rinsed and wiped off.
• Strong chemistry. It is used as “heavy artillery” when all else fails. It can be a carbon cleaner for any brand of ovens or special preparations for professional office and home cleaning.Suitable Karcher RM 533 for varnished surfaces, Karcher RM 532 or RM 536 for hard surfaces. You can look for a suitable composition in the auto chemistry department. Foamy potent products like Multipurpose. The mark “for plastic” is required.
• Melamine sponge. Sometimes you can use it. But one must understand that melamine is a fine abrasive. The sponge does not wash away, but wipes away the dirt from the surface. This leaves the smallest scratches. They are much smaller than with conventional abrasives, but can still be seen.The base is moistened, then cleaned with a melamine sponge, rinsed and wiped dry.

How to deal with stains

A popular problem is yellow spots. Most often they appear on an old light canvas. It is very difficult to get rid of them. Chlorine or any other bleach is not necessary. They will only dissolve the dye. Acidic preparations, including those intended for cleaning bathtubs, will help. From the “folk” recommendations, lemon juice or dissolved citric acid is suitable.

You can remove dark stripes from shoes and furniture with a white eraser or toothpaste. If it does not help, sprinkle WD-40, gently scrub. Alcohol, hydrogen peroxide, acetone, turpentine or solvent will cope with brilliant green, a felt-tip pen or a pen. All this is applied very carefully. Mold and rust are removed with lemon juice, traces of coffee or tea with gasoline. After the linoleum in the kitchen or in the hallway has been cleaned, it is important not to forget about regular cleaning. So that it is always clean and tidy.

Let’s figure out how to wash rough linoleum from the stubborn dirt. This is more difficult to do than with a smooth one. Modern finishes imitate different materials so well that they completely reproduce not only colors, but also textures. Embossed surfaces are more difficult to clean. Impurities are clogged into a grooved pattern, pressed and dried. Therefore, the first thing to do is to soak the caked particles. To do this, they are abundantly moistened with a warm detergent solution and left for a while.

Then scrub with a brush.Its bristles should not be too stiff, otherwise it will damage the panel. It is advisable to use a device with a long handle so that it is convenient to work. The brush will quickly clean the dirty areas, however, you will have to rub them intensively. To make things easier, some people use other devices. The steam mop helps. It washes the coating easily. But it should be used very carefully. Not every material can withstand steam.

Some craftsmen prefer to clean the cloth with a drill, placing a polishing attachment on it.A detergent is applied to the fragment to be cleaned, the drill is turned on at low speed. A regular vacuum cleaner helps a lot if used in tandem with a foam cleaner for a car interior. On contact with dirt, the foam pushes them to the surface. It remains only to collect them with a vacuum cleaner. To effectively clean the floor, you must strictly follow the instructions of the foam manufacturer.

Source: https://www.ivd.ru/dizajn-i-dekor/uborka/kak-ochistit-linoleum-ot-vevshejsya-gryazi-obzor-effektivnyh-sredstv-i-metodik-60341

How and how to properly wash linoleum in the kitchen?

Linoleum is one of the most unpretentious types of kitchen floor covering.But this does not mean that he does not need cleaning at all. If you neglect the rules of care, the coating will become covered with stains of dirt and lose its original shine.

Let’s figure out how often you need to clean and how to wash linoleum in the kitchen in order to preserve its beautiful appearance for a long time.

Basic nuances of wet cleaning

One of the most common mistakes is the desire to start cleaning the coating as early as possible. The most zealous housewives rush to wash the floors 3-4 days after the linoleum has been laid.But nothing good will come from such a rush. The material has not yet settled down and has not taken its final shape, and water will only contribute to deformation. The first wet cleaning is carried out no earlier than 14 days after the laying of the coating.

For routine cleaning, it is not recommended to use strong products. A soapy solution or dishwashing detergent diluted with warm water is sufficient. Even when using these gentle substances, several rules must be observed:

1. Do not allow the floor treated with detergent to dry out.From this, the surface will quickly become cloudy. It is better to wash the floor in small areas in order to have time to remove soap from it before it dries completely.
2. Rinse off solution thoroughly with cold water.
3. After important cleaning, wipe the surface dry without leaving drops. Microfiber or other material with the same structure is best for removing moisture.

Important! The use of compounds containing acetone, chlorine compounds, as well as hard abrasive particles is not allowed. The use of hard sponges and brushes is also undesirable.

By following these simple rules, it is easy to maintain everyday cleanliness.

Special equipment

These formulations are not intended for routine use. Their purpose is to restore the appearance of the coating, damaged by any incidents: spilled coffee, greasy stains, scratches.

One of these means is drying oil. It is applied to the coating, and then the surface is polished to a shine with a rag. Applying this procedure every 3-4 months, you will preserve the pristine shine of linoleum and protect it from minor damage.

The mastic also gives shine, but is also able to clean the coating from sticky layers. Several varieties of mastics are used according to their algorithms, so carefully read the instructions before using.

The main rule when working with any special equipment is not to abuse them. They give excellent results when used in moderation and purposefully, but are not intended for daily use.

How to remove stains and streaks from the surface?

Stains can spoil the appearance of any coating.To know how to clean linoleum in the kitchen from stains, let’s figure out how to approach various types of pollution:

Household chemicals

The following contaminants can be removed with household products:

• coffee, food colors (for example, for Easter eggs) – a few drops of turpentine;

Important! Turpentine can damage some types of linoleum. Therefore, first check its stability in a small area in an unobtrusive place.

• Marker or ink marks. Organic solvents (gasoline, kerosene) applied with a melamine sponge will help. After work, the gloss of the coating is restored with linseed oil. Silk rags are used for polishing;
• rust. To remove it, prepare a weak bleach solution (1 spoon of the product for 10 tablespoons of water).

Typically household chemicals are effective enough to remove dirt the first time.

Handy tools that can be found at home

It is not always necessary to resort to “heavy artillery”.Substances found in any kitchen often help solve the problem. Here are some tried and tested folk methods:

• Iodine stains are removed with baking soda. A few tablespoons of baking soda are poured onto a damp cloth and applied to the stain for 2-3 minutes. Remains of dirt must be wiped off with the same cloth. If the result is not perfect, the procedure is repeated;
• strips from shoes are erased with a regular eraser. After cleaning, it remains to rinse the floor with soapy water.

Plus folk remedies – availability.But sometimes you need to repeat the procedure 2-3 times to achieve the effect.

Source: https://zharovnya.club/remont/pol/kak-i-chem-pravilno-myt-linoleum-na-kuhne.html

90,000 Best iOS Photo Editor Review – Enlight 2 – Wylsacom

Enlight is a powerful photo editor exclusive to iOS. In 2015, Apple chose it as the app of the year. I spent a lot of time on this program, releasing videos and uploading photos to Instagram, demonstrating what can be done with Enlight on iOS.

My subscribers bought this program, someone picked it up on the fly and still cannot live a day without this application. Someone did not “taste” what, and how, and asked me to help figure it out.

I did not do a full review of Enlight, and apparently not in vain, I recently got access to the beta test of the second version of the program, a review that already makes sense to do, since the program is fully functional.

I am doing this review for all my subscribers and for beginners in the hope that you too will be imbued with the capabilities of the application.One great stuff for a long time. Let’s start everything point by point and in chronological order we will analyze each menu, all the tools and features of the application.

Note and main features of the new version.

Enlight 2 added the ability to work with layers and RAW editing – this is what was missing from the already powerful photo editor. The second important feature is the addition of the “Erase” function to all editing modes. You can apply any effect to a photo, and at the right time, literally, pixel by pixel, remove this change where you see fit.

Here’s an example of the simplest way to use Erase: take any picture, convert it to black and white, and remove the black and white effect from any colored object in the photo with the eraser. In the past, people used to install separate applications for such actions.

Now many will say that similar functions have long been present in other editors. Do not rush to draw conclusions, by the end of this review you will understand what is unique about Enlight, and when you try it in work, you will see how smoothly and optimized everything works.

1. Layers

New work area, in which all actions with photos will be performed. You can add a photo, you can add an empty transparent layer. Previously, instead of layers, there was a powerful utility inside Enlight – offset. This mode produced double exposure photos like this one. We will talk about the offset itself below.

1.1 Eraser – a utility that erases any effect applied to a photo, works in a double order, and removes and adds (Restore) where the object was accidentally deleted.The eraser has two modes: basic and fast. “Basic” is painstaking pixel-by-pixel work with your hands, “Fast” – when you need to quickly erase something in a photo without being careful.

The Eraser has the function “Inversion” with the help of it you can, so to speak, invert the erased area, when what was erased remains, and what was not touched, on the contrary, is wiped off. It sounds crazy, but in practice it helps a lot.

As befits a cool photo editor, the eraser has several modes for adjusting the “brush”: you can change the size of the brush, opacity, thickness and accuracy, and most importantly, adjust the way of traversing the lines.If you enable this function, then the eraser brush will predict objects in the photo, and will not erase unnecessary details, carefully bypassing them.

1.2 Opacity – a separate function responsible for the transparency of the selected layer. The eraser can do the same, but here the transparency effect is applied to the entire photo at once.

1.3 Transformation is a cool function that allows you to change the shape of the photo in the x and y axes by pulling the necessary corners with your hands and changing the perspective of the image. Together with adjusting the scale of the photo in layers, this effect makes it possible to work with a photograph in three-dimensional space.

1.4 Flip is a quick function for flipping an image from left to right and vice versa. Convenient when you get a picture in the mirror and you need to change the orientation of the object in the reflection.

1.5 Offset. Now offset is like an add-on over layers, that is, you can take photos not only with double, but also triple and whatever exposure you want. Simultaneously working with 2,3 and a large number of photos, and switching between layers, you can adjust the displacement effect between photos.Set transparency on different layers and use the Erase utility to remove the displacement effect where it is not needed.

1.6 Fill is a kind of filling of the photo. In Enlight 2, this function allows you to fill an image with any color at all, previously it was possible to fill only in white. What is the fill function for? I most often use this effect for portraits, or shots that I prepare for a double exposure effect. I take a picture with a person’s face, fill it with white, and then, using the “Erase” utility, I erase the fill effect on the person’s face, thus leaving only a portrait on a pure white background.

We are done with the first work area, move on to the second.

Tone – this is where all the processes of photo color correction and painting take place.

2.1 Correction – an item where you can adjust the following image parameters:

Brightness
Contrast
Structure
Hue (selects a color palette for the entire image from all colors of the rainbow)
Saturation
Sharpness

I would like to draw your attention to the “Tone” setting, with the help of this utility you can radically change the color palette in the photo.Here is an example of a photo in which the sky and trees are not natural. Here I tweaked the “tonality”, and in order for the truck and the ground to have a natural color, I used an eraser and simply erased the tonal fill from the required area, leaving this effect only on the sky and trees.

2.2 Filter – a collection of filters from developers with a built-in filter store. Up to this point, Enlight did not have an emphasis on filters, now they have added them to satisfy the largest possible number of users.I do not use filters and prefer to “twist” everything by hand.

2.3 Duet is one of my favorite Enlight features. It allows you to split the photo into two equal parts and simultaneously apply different effects to the photo. There are three types of duo:

Circular duo , when the photo is divided into two circles, inner and outer. For the inner area, set some color correction settings, for the outside, others. You adjust the size and ratio of these circles yourself.

Linear duo – Separates the photo with one straight line.So you can conveniently color a photo with a pronounced horizon, dividing the photo, as it were, in half.

Mirror Duo – dividing the editable areas into three parts, the top and bottom will always be proportional to each other, and you will adjust the size of the inner area yourself.

The duet function allows you to create an additional effect of depth in the picture. One of the most popular functions in processing, when you need to evenly and accurately separate objects from each other and apply separate color settings to each part of the photo.

2.4 B&W – here is a paradise for everyone who loves black and white photography and monochrome.

The presets already have ready-made add-ons (filters), which are calibrated according to the thermal scheme, according to the correction with shadows, brightness, sharpness, and different shades of gray. There are a lot of them.

Separately there is a set of tools for manual adjustments of the black and white image. Here you can also separately adjust the brightness, structure, exposure contrast with your hands.

Surprisingly, color correction works in the settings of black and white photography: Red, Green, Blue, Orange, Yellow.This add-on makes it possible to focus on certain areas in the color original of the photo. For example, you have a pronounced yellow object in your photo and you don’t want this object to get lost and fall out of focus after transferring the image to black and white. Put the add-on Yellow and even on a monochrome picture, this object will “shine”.

2.5 The store of new functions is a big innovation that opens up many interesting “features” for users.

In Enlight, using standard utilities and their combinations, you can make various interesting moves.I once wrote about how I create inverted photos, how I take photos with double exposure, how I recolor the sky in a photo, or how I make one surreal out of 3 photos. These are the algorithms of actions in Enlight decided to organize in a separate plugin store.

It is not yet known who and how will fill them, I am negotiating with the developers, I offer them my “moves”. One thing is known, the possibilities of Enlight, like Photoshop on a computer, rest only on your imagination, and additional ready-made solutions will appear with enviable constancy.Perhaps this will be an additional tool for monetizing the ideas of the authors of the photo.

We are done with this block, go to the next one.

Tools.

Here we have accumulated tools for working with photo layouts.

3.1 Canvas is a vivid example of how a separate section can be built from the usual photo cropping function.

Except for standard 1: 1 cropping formats; 5: 4: 16: 9 and so on, there are size templates for different mobile devices.For example, you want to create a picture for the iPhone desktop – there is a pre-created size, you need to make a photo for the Facebook cover, this is also there, all sizes are respected. There are cropping formats for site builders and web designers. There are a lot of useful add-ons.

3.2 Reshape is a useful utility for correcting unevenness in a photo. There is a “bloat” effect, outline strokes, and refinement of details. You can also “freeze” some objects in the photo so that the changes do not affect them.

3.3 New section LightFX – a set of presets for superimposing different highlights on a photo and simulating different light sources. A little “cheat”, but for some tasks it will be indispensable. For example, to create an advertising banner and any commercial image.
Next we move on to the last two sections, which are very popular with bloggers looking to create social media photos and YouTube video covers.

Add.

4.1 Inscription. There are many fonts and emblems to choose from, but in addition to this, you can adjust the alignment of the text, add a shadow, make many font shifting effects by adjusting the translucency and transform the text in three-dimensional space.

4.2 Elements. Lots of graphics and shapes to which you can apply all the same display options as you would apply to fonts.

4.3 Frame. There are many frames, it is possible to select a pattern, edit the width, and using the “fit” function, you can make an auto frame, under the very non-standard photo.

4.4 Memes. Here is a treasure trove for SMM specialists. A special form for placing text on a photo in the style of all popular memes.

4.5 Painting.

Urban is an extraordinary collection of presets that will highlight your urban style shots. Such pictures can be safely given to the printing industry and to make prints on T-shirts, it will be very original.

Squiggles – the name speaks for itself. Arbitrary lines with different textures can be applied to the photo.

Effects is an interesting section that allows you to add the effect of falling autumn leaves, fog or rain. There are both realistic developments and “cartoon” ones.

And so, we figured out the main functions of Enlight 2. The question is, what can be done with this application? And there is a lot that can be done.

The convenience of editing in Enlight also lies in the fact that you can save your sessions and return to them again for revision or changes.In addition, after the final of the project, you can upload a recording of the processing process and always have a video instruction at hand that will remind you of the procedure that led you to the result. Now the beta test of the application is underway, it is not known whether the users who bought the free update will receive the free update, the release date of Enlight 2 is also not known. If you have any difficulties and misunderstandings in this application, I can always answer you in my Instagram, or here, in the comments …

.